Instead of using TARGET_TRIPLE, which is always set to LLVM_DEFAULT_TARGET_TRIPLE,
use that variable directly to populate the various XXXX_TARGET_TRIPLE
variables in the runtimes.
This re-applies 77396bbc98 and 5099e01568, which were reverted in
850b57c5fb because they broke the build.
Differential Revision: https://reviews.llvm.org/D106009
add_lit_testsuite() takes Lit parameters passed to it and adds them
to the parameters used globally when running all test suites. That
means that a target like `check-all`, which ends up calling Lit on
the whole monorepo, will see the test parameters for all the individual
project's test suites.
So, for example, it would see `--param std=c++03` (from libc++abi), and
`--param std=c++03` (from libc++), and `--param whatever` (from another
project being tested at the same time). While always unclean, that works
when the parameters all agree. However, if the parameters share the same
name but have different values, only one of those two values will be used
and it will be incredibly confusing to understand why one of the test
suites is being run with the incorrect parameter value.
For that reason, this commit moves away from using add_lit_testsuite()'s
PARAM functionality, and serializes the parameter values for the runtimes
in the generated config.py file instead, which is local to the specific
test suite.
Differential Revision: https://reviews.llvm.org/D105991
This commit reverts 5099e01568 and 77396bbc98, which broke the build
in various ways. I'm reverting until I can investigate, since that
change appears to be way more subtle than it seemed.
This is necessary for from-scratch configurations to support the 32-bit
mode of the test suite.
Differential Revision: https://reviews.llvm.org/D105435
Before this patch, Lit parameters that were set as a result of CMake
options were not made available to from-scratch configs. This patch
serializes those parameters into the generated lit config file so that
they are available to all configs.
Differential Revision: https://reviews.llvm.org/D105047
The runtimes build uses variables set by add_lit_testsuite to collect
testsuites from all the runtimes.
Differential Revision: https://reviews.llvm.org/D97913
This allows passing parameters to the test suites without using
LLVM_LIT_ARGS. The problem is that we sometimes want to set some
Lit arguments on the CMake command line, but the Lit parameters in
a CMake cache file. If the only knob to do that is LLVM_LIT_ARGS,
the command-line entry overrides the cache one, and the parameters
set by the cache are ignored.
This fixes a current issue with the build bots that they completely
ignore the 'std' param set by Lit, because other Lit arguments are
provided via LLVM_LIT_ARGS on the CMake command-line.
The integration between CMake and executor selection in the new format
wasn't very flexible -- only the default executor and SSH executors were
supported.
This patch makes it possible to specify arbitrary executors with the new
format. With the new testing format, a custom executor is just a script
that gets called with a command-line to execute, and some arguments like
--env, --codesign_identity and --execdir. As such, the default executor
is just run.py.
Remote execution with the SSH executor can be achived by specifying
LIBCXX_EXECUTOR="<path-to-ssh.py> --host <host>". Similarly, arbitrary
scripts can be provided.
We've been meaning to remove those targets for a while, and the fix is
simple enough cause they're all just aliases to other targets.
This is a re-application of f383fb40b1, wich was reverted in 04d48111b
because the build bots had not been updated yet. The build bot configurations
have now been updated not to use the deprecated targets, and I verified
that they were using the non-deprecated targets, so we should be good
unless I missed a bot.
Differential Revision: https://reviews.llvm.org/D76104
This reverts commit f383fb40b. It looks like several of our build bots
are still using the legacy target names, so we'll change those before
we commit this change again.
We've been meaning to remove those targets for a while, and the fix is
simple enough cause they're all just aliases to other targets.
There's no doubt this commit will break some CI systems, however the
fix is trivial.
Differential Revision: https://reviews.llvm.org/D76104
Summary:
Right now the only way to force libc++abi tests to link with the static version of libc++abi is to set `LIBCXXABI_ENABLE_SHARED` to `OFF`. However, this doesn't work when libc++abi is built as standalone project because of [this](54c5224203/libcxxabi/CMakeLists.txt (L503-L519)).
This change allows specifying the version of the library for tests to link with.
This is useful for remote testing, for example, with `SSHExecutor`, where we _have_ to link with libc++abi statically.
Two new CMake options are introduced here: `LIBCXXABI_LINK_TESTS_WITH_SHARED_LIBCXXABI` and `LIBCXXABI_LINK_TESTS_WITH_SHARED_LIBCXX`. They can be set to `OFF` to tell the test utility to link tests with the static libraries.
It shouldn't break anything, because the default values of these options are set such that the test utility will behave the same way.
Reviewers: EricWF, mclow.lists, phosek, mehdi_amini, ldionne, jroelofs, bcraig
Subscribers: mgorny, christof, ldionne, libcxx-commits
Tags: #libc
Differential Revision: https://reviews.llvm.org/D71894
There are several changes:
- Don't stringify Pythonized bools (that's why we're Pythonizing them)
- Support specifying target and sysroot via CMake variables
- Use consistent spelling for --target, --sysroot, --gcc-toolchain
llvm-svn: 353137
This patch updates libc++abi's HandleOutOfTreeLLVM.cmake to match
libc++'s -- and more importantly, to fix a bug where llvm-lit wasn't
found/created when libc++abi was built out-of-tree. This prevented
the test suite from running.
llvm-svn: 322768
+ Now that libcxxabi shares the same threading API as libcxx, a whole
chunk of code in src/config.h is made redundant (I missed this earlier).
+ r291275 split off the externalized-thread-api libcxx configuration from the
external-thread-library libcxx configuration. libcxxabi should follow the
same approach.
llvm-svn: 291440
r281179 Introduced an externally threaded variant of the libc++ library. This
patch adds support for a similar library variant for libc++abi.
Differential revision: https://reviews.llvm.org/D27575
Reviewers: EricWF
llvm-svn: 290888
This patch (and commit summary) mirror r279675 by Chris B which was applied
to libc++ but not libc++abi.
Summary:
The point of this patch is to have a consistent convention for naming build,
check and install targets so that the targets can be constructed from the
project name.
This change renames a bunch of CMake components and targets from libcxxabi to
cxxabi. For each renamed target I've added a convenience target that matches
the old target name and depends on the new target. This will preserve function
of the old targets so that the change doesn't break the world. We can evaluate
if it is worth removing the extra targets later.
llvm-svn: 279938
This patch applies changes similar to those in r279515 to libc++abi.
Summary of changes in this patch:
* Renamed variable LLVM_CONFIG -> LLVM_CONFIG_PATH
* Renamed variable LIBCXXABI_BUILT_STANDALONE -> LIBCXXABI_STANDALONE_BUILD
* Add an include of AddLLVM in the tests subdirectory for add_lit_testsuite.
llvm-svn: 279936
When libcxxabi is being built standalone, unwind dependency is not
available, so do not use it even when LLVM unwinder is being
requested.
Differential Revision: https://reviews.llvm.org/D23228
llvm-svn: 278058
Summary:
This patch changes the libc++abi CMake so that it adds certain target flags like '-m32' or '--gcc-toolchain' before including `config-ix.cmake`.
Since these flags can affect things like `check_library_exists([...])` they needed to be added before the tests are performed.
Additionally this patch adds `LIBCXXABI_BUILD_32_BITS` which defaults to `LLVM_BUILD_32_BITS`.
This patch fixes:
https://llvm.org/bugs/show_bug.cgi?id=27950https://llvm.org/bugs/show_bug.cgi?id=27959
Reviewers: danalbert, jroelofs, bcraig, compnerd, EricWF
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D20886
llvm-svn: 271470
Currently there is only support for a -fno-exceptions libc++ build. This is
problematic for functions such as std::terminate() which are defined in
libc++abi and using any of those functions throws away most of the benefits
of using -fno-exceptions (code-size). This patch introduces a -fno-exceptions
libc++abi build to address this issue.
This new variant of libc++abi cannot be linked against any with-exceptions
code as some symbols necessary for handling exceptions are missing in this
library.
Differential revision: http://reviews.llvm.org/D20677
Reviewers: EricWF, mclow.lists, bcraig
llvm-svn: 271267
This change leverages framework changes made in libcxx. See those changes for
more details. (http://reviews.llvm.org/D16544)
Some Mac specific logic for testing against libc++abi had to be moved from
libcxxabi's config.py, as it was overriding choices made in libcxx's config.py.
That logic is now in libcxx's target_info.py.
http://reviews.llvm.org/D16545
llvm-svn: 266729
The feature check is already in place when building the library but wasn't
honored for the tests.
Differential Revision: http://reviews.llvm.org/D18205
llvm-svn: 263699
Summary:
This patch builds both static and shared versions of libc++abi by default. It adds/repurposes the following cmake options:
* `LIBCXXABI_ENABLE_SHARED`: Enable/disable building the shared library. (Previously using `OFF` would build the static library instead)
* `LIBCXXABI_ENABLE_STATIC`: Enable/disable building the static library.
This patch also re-purposes the CMake target `cxxabi` to be a meta-target for `cxxabi_shared` and `cxxabi_static`. This could potentially break other builds that depend on `cxxabi` being a library target. We will need to apply a patch to libc++'s CMake before committing this change.
Running the tests is still only supported when the shared version is built. Support for running the tests against the static library will come in another patch.
Reviewers: jroelofs, mclow.lists, danalbert, compnerd
Reviewed By: danalbert, compnerd
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D8013
llvm-svn: 231075
libdir suffixes like 'lib64' or 'lib32'.
This support is currently very rhudimentary. We define a variable
LIBCXXABI_LIBDIR_SUFFIX. In a standalone build of libc++abi this can be
directly set as a cached variable to control the multilib suffix used.
When building libc++abi within a larger LLVM build, it is hard wired to
whatever LLVM libdir suffix has been selected. If this doesn't work for
someone, just let me know. I'm happy to change it.
Unfortunately, libc++abi's lit setup made this somewhat problematic to
change. It was setting variables up in a way that caused the resulting
build to not work with lit at all. To fix that, I've moved some
variables around in the CMake build to more closely match where and how
they are defined in the libc++ CMake build. This includes specifically
defining a library root variable in the CMake build where the libdir
suffix can be applied, and then using that rather than re-computing it
from the object directory in the lit config.
This is essentially new functionality for libc++abi so I don't expect it
to have any impact for folks until they start setting these variables.
However, I know libc++abi is built in a diverse set of environments so
just let me know if this causes you any problems.
llvm-svn: 224927
Summary:
This patch adds CMake support for building and testing libc++abi without threads.
1. Add `LIBCXXABI_ENABLE_THREADS` option to CMake.
2. Propagate `LIBCXXABI_ENABLE_THREADS` to lit via lit.site.cfg.in
3. Configure tests for `LIBCXXABI_ENABLE_THREADS=OFF
Currently the test suite does not work when libc++abi is built without threads because that information does not propagate to the test suite.
Reviewers: danalbert, mclow.lists, jroelofs
Reviewed By: jroelofs
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D6393
llvm-svn: 222702
Note: The unwinder currently only works on Darwin and on ARM Linux.
Non-ARM Linux support is not yet implemented, and will fail to build.
llvm-svn: 212824
This makes running libcxxabi tests on Linux _much_ easier.
Adds a check-libcxxabi target to cmake.
Also defaults to building a dynamic libc++abi. This is so that the
default options still test the libc++abi that is being built. There are
two problems with testing a static libc++abi. In the case of a
standalone build, the tests will link the system's libc++, which might
not have been built against our libc++abi. In the case of an in tree
build, libc++ will prefer a dynamic libc++abi from the system over a
static libc++abi from the output directory.
llvm-svn: 212672
Louis Dionne