In r312664 (D36404), JumpThreading stopped threading edges into
loop headers. Unfortunately, I observed a significant performance
regression as a result of this change. Upon further investigation,
the problematic pattern looked something like this (after
many high level optimizations):
while (true) {
bool cond = ...;
if (!cond) {
<body>
}
if (cond)
break;
}
Now, naturally we want jump threading to essentially eliminate the
second if check and hook up the edges appropriately. However, the
above mentioned change, prevented it from doing this because it would
have to thread an edge into the loop header.
Upon further investigation, what is happening is that since both branches
are threadable, JumpThreading picks one of them at arbitrarily. In my
case, because of the way that the IR ended up, it tended to pick
the one to the loop header, bailing out immediately after. However,
if it had picked the one to the exit block, everything would have
worked out fine (because the only remaining branch would then be folded,
not thraded which is acceptable).
Thus, to fix this problem, we can simply eliminate loop headers from
consideration as possible threading targets earlier, to make sure that
if there are multiple eligible branches, we can still thread one of
the ones that don't target a loop header.
Patch by Keno Fischer!
Differential Revision: https://reviews.llvm.org/D42260
llvm-svn: 328798
The existing LoopRotation.cpp is implemented as one of loop passes instead of
being a utility. The user cannot easily perform the loop rotation selectively
(or on demand) under different optimization level. For example, the loop
rotation is needed as part of the logic to convert a loop into a loop with
bottom test for a transformation. If the loop rotation is simply added as a
loop pass before the transformation, the pass is skipped if it is compiled at
–O0 or if it is explicitly disabled by the user, causing the compiler to
generate incorrect code. Furthermore, as a loop pass it will rotate all loops
instead of just the relevant loops.
We provide a utility interface for the loop rotation so that the loop rotation
can be called on demand. The changeset is as follows:
- Create a new file lib/Transforms/Utils/LoopRotationUtils.cpp and move the main
implementation of class LoopRotate into this file.
- Create a new file llvm/include/Transform/Utils/LoopRotationUtils.h with the
interface LoopRotation(...).
- Original LoopRotation.cpp is changed to use the utility function LoopRotation
in LoopRotationUtils.cpp. This is done in the same way community did for
mem-to-reg implementation.
Patch by Jin Lin!
Differential Revision: https://reviews.llvm.org/D44595
llvm-svn: 328766
Otherwise the definitions can't see the extern C declarations and get
name mangled, making it impossible for users to call them. This breaks
the Go bindings.
llvm-svn: 328765
This is a step towards the upcoming KMSAN implementation patch.
KMSAN is going to prepend a special basic block containing
tool-specific calls to each function. Because we still want to
instrument the original entry block, we'll need to store it in
ActualFnStart.
For MSan this will still be F.getEntryBlock(), whereas for KMSAN
it'll contain the second BB.
llvm-svn: 328697
This is a step towards the upcoming KMSAN implementation patch.
The isStore argument is to be used by getShadowOriginPtrKernel(),
it is ignored by getShadowOriginPtrUserspace().
Depending on whether a memory access is a load or a store, KMSAN
instruments it with different functions, __msan_metadata_ptr_for_load_X()
and __msan_metadata_ptr_for_store_X().
Those functions may return different values for a single address,
which is necessary in the case the runtime library decides to ignore
particular accesses.
llvm-svn: 328692
Fixed counter/weight overflow that leads to an assertion. Also fixed the help
string for pgo-emit-branch-prob option.
Differential Revision: https://reviews.llvm.org/D44809
llvm-svn: 328653
We check `canPeel` twice: when evaluating the number of iterations to be peeled
and within the method `peelLoop` that performs peeling. This method is only
executed if the calculated peel count is positive. Thus, the check in `peelLoop` can
never fail. This patch replaces this check with an assert.
Differential Revision: https://reviews.llvm.org/D44919
Reviewed By: fhahn
llvm-svn: 328615
As a follow-up to r328480, this updates the logic for the decreasing
safety checks in a similar manner:
- CanBeMax is replaced by CannotBeMaxInLoop which queries
isLoopEntryGuardedByCond on the maximum value.
- SumCanReachMin is replaced by isSafeDecreasingBound which includes
some logic from parseLoopStructure and, again, has been updated to
use isLoopEntryGuardedByCond on the given bounds.
Differential Revision: https://reviews.llvm.org/D44776
llvm-svn: 328613
This change brings performance of zlib up by 10%. The example below is from a
hot loop in longest_match() from zlib.
do.body:
%cur_match.addr.0 = phi i32 [ %cur_match, %entry ], [ %2, %do.cond ]
%idx.ext = zext i32 %cur_match.addr.0 to i64
%add.ptr = getelementptr inbounds i8, i8* %win, i64 %idx.ext
%add.ptr2 = getelementptr inbounds i8, i8* %add.ptr, i64 %idx.ext1
%add.ptr3 = getelementptr inbounds i8, i8* %add.ptr2, i64 -1
In this example %idx.ext1 is a loop invariant. It will be moved above the use of
loop induction variable %idx.ext such that it can be hoisted out of the loop by
LICM. The operands that have dependences carried by the loop will be sinked down
in the GEP chain. This patch will produce the following output:
do.body:
%cur_match.addr.0 = phi i32 [ %cur_match, %entry ], [ %2, %do.cond ]
%idx.ext = zext i32 %cur_match.addr.0 to i64
%add.ptr = getelementptr inbounds i8, i8* %win, i64 %idx.ext1
%add.ptr2 = getelementptr inbounds i8, i8* %add.ptr, i64 -1
%add.ptr3 = getelementptr inbounds i8, i8* %add.ptr2, i64 %idx.ext
llvm-svn: 328539
This replaces a large chunk of code that was looking for compound
patterns that include these sub-patterns. Existing tests ensure that
all of the previous examples are still folded as expected.
We still need to loosen the FMF check.
llvm-svn: 328502
Implement TTI interface for targets to indicate that the LSR should give
priority to post-incrementing addressing modes.
Combination of patches by Sebastian Pop and Brendon Cahoon.
Differential Revision: https://reviews.llvm.org/D44758
llvm-svn: 328490
Current logic of loop SCEV invalidation in Loop Unroller implicitly relies on
fact that exit count of outer loops cannot rely on exiting blocks of
inner loops, which is true in current implementation of backedge taken count
calculation but is wrong in general. As result, when we only forget the loop that
we have just unrolled, we may still have cached data for its outer loops (in particular,
exit counts) which keeps references on blocks of inner loop that could have been
changed or even deleted.
The attached test demonstrates a situaton when after unrolling of innermost loop
the outermost loop contains a dangling pointer on non-existant block. The problem
shows up when we apply patch https://reviews.llvm.org/D44677 that makes SCEV
smarter about exit count calculation. I am not sure if the bug exists without this patch,
it appears that now it is accidentally correct just because in practice exact backedge
taken count for outer loops with complex control flow inside is never calculated.
But when SCEV learns to do so, this problem shows up.
This patch replaces existing logic of SCEV loop invalidation with a correct one, which
happens to be invalidation of outermost loop (which also leads to invalidation of all
loops inside of it). It is the only way to ensure that no outer loop keeps dangling pointers
on removed blocks, or just outdated information that has changed after unrolling.
Differential Revision: https://reviews.llvm.org/D44818
Reviewed By: samparker
llvm-svn: 328483
CanBeMin is currently used which will report true for any unknown
values, but often a check is performed outside the loop which covers
this situation:
for (int i = 0; i < N; ++i)
...
if (N > 0)
for (int i = 0; i < N; ++i)
...
So I've add 'LoopGuardedAgainstMin' which reports whether N is
greater than the minimum value which then allows loop with a variable
loop count to be optimised. I've also moved the increasing bound
checking into its own function and replaced SumCanReachMax is another
isLoopEntryGuardedByCond function.
llvm-svn: 328480
Summary:
This was motivated by absence of PrunEH functionality in new PM.
It was decided that a proper way to do PruneEH is to add NoUnwind inference
into PostOrderFunctionAttrs and then perform normal SimplifyCFG on top.
This change generalizes attribute handling implemented for (a removal of)
Convergent attribute, by introducing a generic builder-like class
AttributeInferer
It registers all the attribute inference requests, storing per-attribute
predicates into a vector, and then goes through an SCC Node, scanning all
the instructions for not breaking attribute assumptions.
The main idea is that as soon all the instructions from all the functions
of SCC Node conform to attribute assumptions then we are free to infer
the attribute as set for all the functions of SCC Node.
It handles two distinct cases of attributes:
- those that might break due to derefinement of the function code
for these attributes we are allowed to apply inference only if all the
functions are "exact definitions". Example - NoUnwind.
- those that do not care about derefinement
for these attributes we are allowed to apply inference as soon as we see
any function definition. Example - removal of Convergent attribute.
Also in this commit:
* Converted all the FunctionAttrs tests to use FileCheck and added new-PM
invocations to them
* FunctionAttrs/convergent.ll test demonstrates a difference in behavior between
new and old PM implementations. Marked with FIXME.
* PruneEH tests were converted to new-PM as well, using function-attrs+simplify-cfg
combo as intended
* some of "other" tests were updated since function-attrs now infers 'nounwind'
even for old PM pipeline
* -disable-nounwind-inference hidden option added as a possible workaround for a supposedly
rare case when nounwind being inferred by default presents a problem
Reviewers: chandlerc, jlebar
Reviewed By: jlebar
Subscribers: eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D44415
llvm-svn: 328377
Summary:
Porting HWASan to Linux x86-64, first of the three patches, LLVM part.
The approach is similar to ARM case, trap signal is used to communicate
memory tag check failure. int3 instruction is used to generate a signal,
access parameters are stored in nop [eax + offset] instruction immediately
following the int3 one.
One notable difference is that x86-64 has to untag the pointer before use
due to the lack of feature comparable to ARM's TBI (Top Byte Ignore).
Reviewers: eugenis
Subscribers: kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D44699
llvm-svn: 328342
When building the SLP tree, we look for reuse among the vectorized tree
entries. However, each gather sequence is represented by a unique tree entry,
even though the sequence may be identical to another one. This means, for
example, that a gather sequence with two uses will be counted twice when
computing the cost of the tree. We should only count the cost of the definition
of a gather sequence rather than its uses. During code generation, the
redundant gather sequences are emitted, but we optimize them away with CSE. So
it looks like this problem just affects the cost model.
Differential Revision: https://reviews.llvm.org/D44742
llvm-svn: 328316
For comparisons with parameters, we can use the ParamState lattice
elements which also provide constant range information. This improves
the code for PR33253 further and gets us closer to use
ValueLatticeElement for all values.
Also, as we are using the range information in the solver directly, we
do not need tryToReplaceWithConstantRange afterwards anymore.
Reviewers: dberlin, mssimpso, davide, efriedma
Reviewed By: mssimpso
Differential Revision: https://reviews.llvm.org/D43762
llvm-svn: 328307
Loop peeling also has an impact on the induction variables, so we should
benefit from induction variable simplification after peeling too.
Reviewers: sanjoy, bogner, mzolotukhin, efriedma
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D43878
llvm-svn: 328301
Transforms/Scalar/SCCP.cpp implemented both the Scalar and IPO SCCP, but
this meant Transforms/Scalar including Transfroms/IPO headers, creating
a circular dependency. (IPO depends on Scalar already) - so move the IPO
SCCP shims out into IPO and the basic library implementation accessible
from Scalar/SCCP.h to be used from the IPO/SCCP.cpp implementation.
llvm-svn: 328250
Summary:
When building with libFuzzer, converting control flow to selects or
obscuring the original operands of CMPs reduces the effectiveness of
libFuzzer's heuristics.
This patch provides an attribute to disable or modify certain optimizations
for optimal fuzzing signal.
Provides a less aggressive alternative to https://reviews.llvm.org/D44057.
Reviewers: vitalybuka, davide, arsenm, hfinkel
Reviewed By: vitalybuka
Subscribers: junbuml, mehdi_amini, wdng, javed.absar, hiraditya, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D44232
llvm-svn: 328214
Summary:
LoopPredication is not profitable when the loop is known to always exit
through some block other than the latch block.
A coarse grained latch check can cause loop predication to predicate the
loop, and unconditionally deoptimize.
However, without predicating the loop, the guard may never fail within the
loop during the dynamic execution because the non-latch loop termination
condition exits the loop before the latch condition causes the loop to
exit.
We teach LP about this using BranchProfileInfo pass.
Reviewers: apilipenko, skatkov, mkazantsev, reames
Reviewed by: skatkov
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44667
llvm-svn: 328210
The dominator tree analysis can be preserved easily.
Some other kinds of analysis can probably be preserved
too.
Reviewers: junbuml, dberlin
Reviewed By: dberlin
Differential Revision: https://reviews.llvm.org/D43173
llvm-svn: 328206
Evgeniy Stepanov