Similar to the migration of or-folding to FoldOr, there are a few cases
where the fold in IRBuilder::CreateAnd triggered directly. Those have
been updated.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D117431
A prevectorized loop may contain multiple statements, in which case
isl_schedule_node_band_sink will sink the vector band to multiple
leaves. Instead of statically assuming a specific tree structure after
sinking, add a SIMD marker to all inner bands.
Fixes llvm.org/PR52637
Commit 573531fb1f fixed the colon at the
end of a CHECK line (was a semicolon by mistake). With the check
enabled, it turned out that it was failing. Check for the correct
content.
Also add the missing colon to the next CHECK line.
When the option -polly-loopfusion-greedy is set, the ScheduleOptimizer
tries to aggressively fuse any band it can and does not violate any
dependences.
As part if the implementation, the functionalty for copying a band
into an new schedule was extracted out of the ScheduleTreeRewriter.
This is a followon to D109845. With that landed, we will have fixed all known instances of pr51817, and can thus start inferring flags more aggressively with greatly reduced risk of miscompiles. This patch simply applies the same inference logic used in that patch to our other major flag inference path.
We can still do much better here (on both paths), but this is our first step.
Differential Revision: https://reviews.llvm.org/D111003
This fixes a violation of the wrap flag rules introduced in c4048d8f. This was also noted in the (very old) PR23527.
The issue being fixed is that we assume the inbound flag on any GEP assumes that all users of *any* gep (or add) which happens to map to that SCEV would also be UB if the (other) gep overflowed. That's simply not true.
In terms of the test diffs, I don't see anything seriously problematic. The lost flags are expected (given the semantic restriction on when its legal to tag the SCEV), and there are several cases where the previously inferred flags are unsound per the new semantics.
The only common trend I noticed when looking at the deltas is that by not considering branch on poison as immediate UB in ValueTracking, we do miss a few cases we could reclaim. We may be able to claw some of these back with the follow ideas mentioned in PR51817.
It's worth noting that most of the changes are analysis result only changes. The two transform changes are pretty minimal. In one case, we miss the opportunity to infer a nuw (correctly). In the other, we fail to fold an exit and produce a loop invariant form instead. This one is probably over-reduced as the program appears to be undefined in practice, and neither before or after exploits that.
Differential Revision: https://reviews.llvm.org/D109789
multiplication
The following code modifies elements of the array D.
for (i = 0; i < _PB_NI; i++)
for (j = 0; j < _PB_NJ; j++)
{
for (k = 0; k < _PB_NK; k++)
{
double Mul = A[i][k] * B[k][j];
D[i][j][k] += Mul;
C[i][j] += Mul;
}
}
Nevertheless, the code is recognised as a matrix-matrix multiplication, since
the second and third dimensions of D are accessed with non-zero strides.
This fixes the typo, which was made during the translation to C++ bindings
(https://reviews.llvm.org/D35845).
Reviewed By: Michael Kruse <llvm@meinersbur.de>
Differential Revision: https://reviews.llvm.org/D110491
SplitBlockPredecessors is unable to insert an additional BasicBlock
between an indirectbr/callbr terminator and the successor blocks.
This is needed by Polly to normalize the control flow before emitting
its optimzed code.
This patches rejects regions entered by an indirectbr/callbr to not fail
later at code generation.
This fixes llvm.org/PR51964
Recommit with "REQUIRES: asserts" in test that uses statistics.
SplitBlockPredecessors is unable to insert an additional BasicBlock
between an indirectbr/callbr terminator and the successor blocks.
This is needed by Polly to normalize the control flow before emitting
its optimzed code.
This patches rejects regions entered by an indirectbr/callbr to not fail
later at code generation.
This fixes llvm.org/PR51964
Inline assembly was not handled at all and treated like a llvm::Value.
In particular, it tried to create a pointer it which is not allowed.
Fix by handling like a llvm::Constant such that it is just reused when
required, instead of trying to marshall it in memory.
Fixes llvm.org/PR51960
VirtualUse ensures consistency over different source of values with
Polly. In particular, this enables its use of instructions moved between
Statement. Before the patch, the code wrongly assumed that the BB's
instructions are also the ScopStmt's instructions. Reference are
determined for OpenMP outlining and GPGPU kernel extraction.
GPGPU CodeGen had some problems. For one, it generated GPU kernel
parameters for constants. Second, it emitted GPU-side invariant loads
which have already been loaded by the host. This has been partially
fixed, it still generates a store for the invariant load result, but
using the value that the host has already written.
WARNING: I did not test the generated PollyACC code on an actual GPU.
The improved consistency will be made use of in the next patch.
The function was intended to catch OpenMP functions such as
get_thread_id(). If matched, the call would be considered synthesizable.
There were a few problems with this:
* get_thread_id() is not 'const' in the sense of have the gcc manual
defines it: "do not examine any values except their arguments".
get_thread_id() reads OpenCL runtime libreary global state.
What was inteded was probably 'speculable'.
* isConstCall was implemented using mayReadOrWriteMemory(). 'const' is
stricter than that, mayReadOrWriteMemory is e.g. true for malloc(),
since it may only read/write addresses that are considered
inaccessible fro the application. However, malloc is certainly not
speculable.
* Values that are isConstCall were not handled consistently throughout
Polly. In particular, it was not considered for referenced values
(OpenMP outlining and PollyACC).
Fix by removing special handling for isConstCall entirely.
This is a simple version without the possibility to define distribute
points or followup-transformations. However, it is the first
transformation that has to check whether the transformation is correct.
It interprets the same metadata as the LoopDistribute pass.
Re-apply after revert in c7bcd72a38 with
fix: Take isBand out of #ifndef NDEBUG since it now is used
unconditionally.
The name of the option is misleading and has been renamed by isl to
"serialize-sccs". Instead of also renaming the option, remove it.
The option is still accessible using
-polly-isl-arg=--no-schedule-serialize-sccs
This is a simple version without the possibility to define distribute
points or followup-transformations. However, it is the first
transformation that has to check whether the transformation is correct.
It interprets the same metadata as the LoopDistribute pass.
This metadata was intended to mark all accesses within an iteration to be pairwise non-aliasing, in this case because every memory of a base pointer is touched (read or write) at most once. This is typical for 'sweeps' over all data. The stated motivation from D30606 is to ensure that unrolled iterations are considered non-aliasing.
Rhe implemention had multiple issues:
* The structure of the noalias metadata was malformed. D110026 added check in the verifier for this metadata, and the tests were failing since then.
* This is not true for the outer loops of the BLIS matrix multiplication, where it was being inserted. Each element of A, B, C is accessed multiple times, as often as the loop not used as an index is iterating.
* Scopes were added to SecondLevelOtherAliasScopeList (used for the !noalias scop list) on-the-fly when another SCEV was seen. This meant that previously visited instructions would not be updated with alias scopes that are only seen later, missing out those SCEVs they should not be aliasing with.
* Since the !noalias scope list would ideally consists of all other SCEV for this base pointer, we might run quickly into scalability issues. Especially after unrolling there would probably at least once SCEV per instruction and unroll instance.
* The inter-iteration noalias base pointer was not removed after leaving the loop marked with it, effectively marking everything after it to noalias as well.
A solution I considered was to mark each instruction as non-aliasing with its own scope. The instruction itself would obviously alias itself, but such construction might also be considered invalid. Duplicating the instruction (e.g. due to speculation) would mark the instruction non-aliasing with its clone. I don't want to go into this territory, especially since the original motivation of determining unrolled instances as noalias based on SCEV is the what scev-aa does as well.
This effectively reverts D30606 and D35761.
Polly does not use the count program itself, but somewhere in lit it is
expected to exists. Otherwise, the following error occurs:
llvm-lit: llvm-project/llvm/utils/lit/lit/llvm/subst.py:133: fatal: Did not find count in ./bin
Code outside the SCoP will be executed recardless of the code versioning
runtime check introduced by CodeGeneration. Assumption made based on
that these are never executed in Polly-optimized code does not hold.
This fixes the miscompilation of MultiSource/Applications/lambda-0.1.3
The new pass manager does not allow adding module passes at the
-polly-position=before-vectorizer extension point. Introduce a
DumpFunctionPass that dumps only current function. In contrast to the
legacy pass manager's -polly-dump-before, each function will be dumped
into its own file. -polly-dump-before-file is still not supported.
The DumpFunctionPass uses llvm::CloneModule to copy the current function
into a new module and then write it into a file.
This is needed for having the functions isl_{set,map}_n_basic_{set,map}
exported to the C++ interface.
Some tests have been modified to reflect the isl changes.
Commit 4c7f820b2b changed the llvm.powi intrinsic to support
different 'int' sizes for the exponent. That happened to break
the IntrinsicToLibdeviceFunc mapping in PPCGCodeGeneration, which
obviously should have been updated as part of commit 4c7f820b2b
(https://reviews.llvm.org/D99439).
The shortcoming was found by buildbots that use
-DPOLLY_ENABLE_GPGPU_CODEGEN=ON
This patch should fixup the problem.
When we're remapping an AddRec, the AddRec constructed by a partial
rewrite might not make sense. This triggers an assertion complaining
it's not loop-invariant.
Instead of constructing the partially rewritten AddRec, just skip
straight to calling evaluateAtIteration.
Testcase was automatically reduced using llvm-reduce, so it's a little
messy, but hopefully makes sense.
Differential Revision: https://reviews.llvm.org/D102959
Only supported with -polly-position=early. Unfortunately, the
extension point callpack for VectorizerStart only passes a
FunctionPassManager, making it impossible to add a module pass.
This required support for the canonicalization passes, inlcuding
porting RewriteByReferenceParams to the NPM.
For some reason, the legacy pass pipeline with -polly-position=early did
not run the CodePreparation pass. This was fixed as well.
We previously had a different interpretation of unroll transformation
attributes than how LoopUnroll interpreted it. In particular,
llvm.loop.unroll.enable was needed explicitly to enable it and disabling
metadata was ignored.
Additionally, it required that either full unrolling or an unroll factor
to be specified or fail otherwise. An unroll factor is still required,
but the transformation is ignored with the hope that LoopUnroll is going
to apply the unrolling, since Polly currently does not implement an
heuristic.
Fixes llvm.org/PR50109
We enumerated the cross product Domain x Scatter, but sorted only be the
scatter key. In case there are are multiple statement instances per
scatter value, the order between statement instances of the same loop
iteration was undefined.
Propertly enumerate and sort only by the scatter value, and group the
domains using the scatter dimension again.
Thanks to Leonard Chan for the report.
Make Polly look for unrolling metadata (https://llvm.org/docs/TransformMetadata.html#loop-unrolling) that is usually only interpreted by the LoopUnroll pass and apply it to the SCoP's schedule.
While not that useful by itself (there already is an unroll pass), it introduces mechanism to apply arbitrary loop transformation directives in arbitrary order to the schedule. Transformations are applied until no more directives are found. Since ISL's rescheduling would discard the manual transformations and it is assumed that when the user specifies the sequence of transformations, they do not want any other transformations to apply. Applying user-directed transformations can be controlled using the `-polly-pragma-based-opts` switch and is enabled by default.
This does not influence the SCoP detection heuristic. As a consequence, loop that do not fulfill SCoP requirements or the initial profitability heuristic will be ignored. `-polly-process-unprofitable` can be used to disable the latter.
Other than manually editing the IR, there is currently no way for the user to add loop transformations in an order other than the order in the default pipeline, or transformations other than the one supported by clang's LoopHint. See the `unroll_double.ll` test as example that clang currently is unable to emit. My own extension of `#pragma clang loop` allowing an arbitrary order and additional transformations is available here: https://github.com/meinersbur/llvm-project/tree/pragma-clang-loop. An effort to upstream this functionality as `#pragma clang transform` (because `#pragma clang loop` has an implicit transformation order defined by the loop pipeline) is D69088.
Additional transformations from my downstream pragma-clang-loop branch are tiling, interchange, reversal, unroll-and-jam, thread-parallelization and array packing. Unroll was chosen because it uses already-defined metadata and does not require correctness checks.
Reviewed By: sebastiankreutzer
Differential Revision: https://reviews.llvm.org/D97977
This reverts commit 329aeb5db4,
and relands commit 61f006ac65.
This is a continuation of D89456.
As it was suggested there, now that SCEV models `PtrToInt`,
we can try to improve SCEV's pointer handling.
In particular, i believe, i will need this in the future
to further fix `SCEVAddExpr`operation type handling.
This removes special handling of `ConstantPointerNull`
from `ScalarEvolution::createSCEV()`, and add constant folding
into `ScalarEvolution::getPtrToIntExpr()`.
This way, `null` constants stay as such in SCEV's,
but gracefully become zero integers when asked.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D98147
This is a continuation of D89456.
As it was suggested there, now that SCEV models `PtrToInt`,
we can try to improve SCEV's pointer handling.
In particular, i believe, i will need this in the future
to further fix `SCEVAddExpr`operation type handling.
This removes special handling of `ConstantPointerNull`
from `ScalarEvolution::createSCEV()`, and add constant folding
into `ScalarEvolution::getPtrToIntExpr()`.
This way, `null` constants stay as such in SCEV's,
but gracefully become zero integers when asked.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D98147
Roman Lebedev