- Add a late pass to expand pseudo instructions (tail call and EH returns).
Instead of doing it in the prologue emission.
- Factor some static methods in X86FrameLowering to ease code sharing.
NFC.
Related to <rdar://problem/20821487>
llvm-svn: 237977
Unfortunately, I can't reduce a small test case for this (although compiling
mpfr-3.1.2 with -O2 -mcpu=a2 would fairly reliably trigger a crash), but the
problem is fairly clear (at least once you know you're looking for one). If the
TLS instruction being replaced was at the end of the block, we'd increment the
iterator past it (so it would then point to MBB.end()), and then we'd increment
it again as part of the for statement, thus overrunning the end of the list.
Don't do that.
llvm-svn: 237974
Summary:
x = &a[i];
y = &a[i + j];
=>
y = x + j;
along with some refactoring work such as extracting method
findClosestMatchingDominator.
Depends on D9786 which provides the ScalarEvolution::getGEPExpr interface.
Test Plan: nary-gep.ll
Reviewers: meheff, broune
Reviewed By: broune
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D9802
llvm-svn: 237971
Prior to this patch, we could update the operand of another MI in the same
bundle.
Longer version:
Before InlineSpiller rematerializes a vreg, it iterates over operands of each MI
in a bundle, collecting all (MI, OpNo) pairs that reference that vreg.
Then if it does rematerialize, it goes through the pair list and replaces the
operands with the new (rematerialized) vreg. The problem is, it tries to
replace all of these operands in the main MI ! This works fine for single MIs.
However, if we are processing a bundle of MIs and the list contains multiple
pairs - the rematerialization will either crash trying to access a non-existing
operand of the main MI, or silently corrupt one of the existing ones. It will
also ignore other MIs in the bundle.
The obvious fix is to use the MI pointers saved in collected (MI, OpNo) pairs.
This must have been the original intent of the pair list but somehow these
pointers got lost.
Patch by Dmitri Shtilman <dshtilman@icloud.com>!
Differential revision: http://reviews.llvm.org/D9904
<rdar://problem/21002163>
llvm-svn: 237964
Summary:
This supersedes http://reviews.llvm.org/D4010, hopefully properly
dealing with the JIT case and also adds an actual test case.
DwarfContext was basically already usable for the JIT (and back when
we were overwriting ELF files it actually worked out of the box by
accident), but in order to resolve relocations correctly it needs
to know the load address of the section.
Rather than trying to get this out of the ObjectFile or requiring
the user to create a new ObjectFile just to get some debug info,
this adds the capability to pass in that info directly.
As part of this I separated out part of the LoadedObjectInfo struct
from RuntimeDyld, since it is now required at a higher layer.
Reviewers: lhames, echristo
Reviewed By: echristo
Subscribers: vtjnash, friss, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D6961
llvm-svn: 237961
The raw non-instruction/constant form of this is still relying on being
able to access the pointee type from a pointer type - those will be
cleaned up later. For now, just focus on the cases where the pointee
type is easily accessible.
llvm-svn: 237958
This commit is a 2nd attempt at committing the initial MIR serialization patch.
The first commit (r237708) made the incremental buildbots unstable and was
reverted in r237730. The original commit didn't add a terminating null
character to the LLVM IR source which was passed to LLParser, and this
sometimes caused the test 'llvmIR.mir' to fail with a parsing error because
the LLVM IR source didn't have a null character immediately after the end
and thus LLLexer encountered some garbage characters that ultimately caused
the error.
This commit also includes the other test fixes I committed in
r237712 (llc path fix) and r237723 (remove target triple) which
also got reverted in r237730.
--Original Commit Message--
MIR Serialization: print and parse LLVM IR using MIR format.
This commit is the initial commit for the MIR serialization project.
It creates a new library under CodeGen called 'MIR'. This new
library adds a new machine function pass that prints out the LLVM IR
using the MIR format. This pass is then added as a last pass when a
'stop-after' option is used in llc. The new library adds the initial
functionality for parsing of MIR files as well. This commit also
extends the llc tool so that it can recognize and parse MIR input files.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun, Philip Reames
Differential Revision: http://reviews.llvm.org/D9616
llvm-svn: 237954
My recent patch to add support for ISA 2.07 vector pack/unpack
instructions didn't properly check for availability of the vpkudum
instruction when recognizing it as a special vector shuffle case.
This causes us to leave the vector shuffle in place (rather than
converting it to a vector permute) so that it can be recognized later
as a vpkudum, but that pattern is invalid for processors prior to
POWER8. Thus LLVM crashes with an "unable to select" message. We
observed this since one of our buildbots is configured to generate
code for a POWER7.
This patch fixes the problem by checking for availability of the
vpkudum instruction during custom lowering of vector shuffles.
I've added a test case variant for the vpkudum pattern when the
instruction isn't available.
llvm-svn: 237952
so DWARF skeleton CUs can be expression in IR. A skeleton CU is a
(typically empty) DW_TAG_compile_unit that has a DW_AT_(GNU)_dwo_name and
a DW_AT_(GNU)_dwo_id attribute. It is used to refer to external debug info.
This is a prerequisite for clang module debugging as discussed in
http://lists.cs.uiuc.edu/pipermail/cfe-dev/2014-November/040076.html.
In order to refer to external types stored in split DWARF (dwo) objects,
such as clang modules, we need to emit skeleton CUs, which identify the
dwarf object (i.e., the clang module) by filename (the SplitDebugFilename)
and a hash value, the dwo_id.
This patch only contains the IR changes. The idea is that a CUs with a
non-zero dwo_id field will be emitted together with a DW_AT_GNU_dwo_name
and DW_AT_GNU_dwo_id attribute.
http://reviews.llvm.org/D9488
rdar://problem/20091852
llvm-svn: 237949
On X86 (and similar OOO cores) unrolling is very limited, and even if the
runtime unrolling is otherwise profitable, the expense of a division to compute
the trip count could greatly outweigh the benefits. On the A2, we unroll a lot,
and the benefits of unrolling are more significant (seeing a 5x or 6x speedup
is not uncommon), so we're more able to tolerate the expense, on average, of a
division to compute the trip count.
llvm-svn: 237947
The commit null terminates the string value in the `yaml::BlockScalarNode`
class.
This change is motivated by the initial MIR serialization commit (r237708)
that I reverted in r237730 because the LLVM IR source from the block
scalar node wasn't terminated by a null character and thus the buildbots
failed on one testcase sometimes. This change enables me to recommit
the reverted commit.
llvm-svn: 237942
The existing code for method StreamingMemoryObject.fetchToPos does not respect
the corresonding call to setKnownObjectSize(). As a result, it allows the
StreamingMemoryObject to read bytes past the object size.
This patch provides a test case, and code to fix the problem.
Patch by Karl Schimpf
Differential Revision: http://reviews.llvm.org/D8931
llvm-svn: 237939
http://reviews.llvm.org/D9891
Following up on the VSX single precision loads and stores added earlier, this
adds support for elementary arithmetic operations on single precision values
in VSX registers. These instructions utilize the new VSSRC register class.
Instructions added:
xsaddsp
xsdivsp
xsmulsp
xsresp
xsrsqrtesp
xssqrtsp
xssubsp
llvm-svn: 237937
This starts merging MCSection and MCSectionData.
There are a few issues with the current split between MCSection and
MCSectionData.
* It optimizes the the not as important case. We want the production
of .o files to be really fast, but the split puts the information used
for .o emission in a separate data structure.
* The ELF/COFF/MachO hierarchy is not represented in MCSectionData,
leading to some ad-hoc ways to represent the various flags.
* It makes it harder to remember where each item is.
The attached patch starts merging the two by moving the alignment from
MCSectionData to MCSection.
Most of the patch is actually just dropping 'const', since
MCSectionData is mutable, but MCSection was not.
llvm-svn: 237936
Predicate UseAVX depricates pattern selection on AVX-512.
This predicate is necessary for DAG selection to select EVEX form.
But mapping SSE intrinsics to AVX-512 instructions is not ready yet.
So I replaced UseAVX with HasAVX for intrinsics patterns.
llvm-svn: 237903
Simplifying Triple::parseARMArch, leaving all the parsing to ARMTargetParser.
This commit also adds AArch64 detection to ARMTargetParser canonicalization,
and a two RedHat arch names (v{6,7}hl, meaning hard-float / little-endian).
Adding enough unit tests to cover the basics. Clang checks fine.
llvm-svn: 237902
Correct assertion would be that there is no other uses from chain we are currently cloning. It is ok to have other uses of values not from this chain.
Differential Revision: http://reviews.llvm.org/D9882
llvm-svn: 237899
This patch improves support for sign extension of the lower lanes of vectors of integers by making use of the SSE41 pmovsx* sign extension instructions where possible, and optimizing the sign extension by shifts on pre-SSE41 targets (avoiding the use of i64 arithmetic shifts which require scalarization).
It converts SIGN_EXTEND nodes to SIGN_EXTEND_VECTOR_INREG where necessary, that more closely matches the pmovsx* instruction than the default approach of using SIGN_EXTEND_INREG which splits the operation (into an ANY_EXTEND lowered to a shuffle followed by shifts) making instruction matching difficult during lowering. Necessary support for SIGN_EXTEND_VECTOR_INREG has been added to the DAGCombiner.
Differential Revision: http://reviews.llvm.org/D9848
llvm-svn: 237885
We had not been trying hard enough to resolve def names inside multiclasses
that had complex concatenations, etc. Now we'll try harder.
Patch by Amaury Sechet!
llvm-svn: 237877
Create a low-overhead path for `EmitLabelDifference()` that emits a
emits an absolute number when (1) the output is an object stream and (2)
the two symbols are in the same data fragment.
This drops memory usage on Mach-O from 975 MB down to 919 MB (5.8%).
The only call is when `!doesDwarfUseRelocationsAcrossSections()` --
i.e., on Mach-O -- since otherwise an absolute offset from the start of
the section needs a relocation. (`EmitLabelDifference()` is cheaper on
ELF anyway, since it creates 1 fewer temp symbol, and it gets called far
less often. It's not clear to me if this is even a bottleneck there.)
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 237876
In effect a partial revert of r237858, which was a dumb shortcut.
Looking at the dependencies of the destination should be the proper
fix: if the new memset would depend on anything other than itself,
the transformation isn't correct.
llvm-svn: 237874
Finally remove the `MCSymbolData::Symbol` pointer. It was still being
used to track whether `MCSymbolData` had been initialized, but this is
better tracked by the bitfield in `MCSymbol`.
The only caller of `MCSymbolData::initialize()` was `MCAssembler`, which
(other than `Symbol`) passed in all-0 values. Replace all that
indirection with a default constructor.
The main point is a cleanup (and there's more cleanup to do), but there
are also some small memory savings. I measured ~989 MB down to ~975 MB,
cutting a little over 1% off the top of `llc`.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 237873
Remove the last use of `MCSymbolData::getSymbol()`. There's some
*really* hairy stuff going on in `MachObjectWriter::WriteNList()` that I
want to come back to. In particular, it updates `Symbol` to point at
its aliasee (if any), but leaves `Data` behind, and it's not clear
whether everything makes sense there.
For now I've left the logic unchanged by adding `OrigSymbol` and moving
the FIXME from r237750 up a bit higher. I've filed PR23598 to track
looking into this.
llvm-svn: 237867
Fixes PR23599, another miscompile introduced by r235232: when there is
another dependency on the destination of the created memset (i.e., the
part of the original destination that the memcpy doesn't depend on)
between the memcpy and the original memset, we would insert the created
memset after the memcpy, and thus after the other dependency.
Instead, insert the created memset right after the old one.
llvm-svn: 237858
The ByteStreamer here wasn't taking account of whether the asm streamer was text based and verbose. Only with that combination should we emit comments.
This change makes sure that we only actually convert a Twine to a string using Twine::str() if we need the comment. This saves about 10000 small allocations on a test case involving the verify-use_list-order bitcode going through llc with debug info.
Note, this is NFC as the comments would ultimately never be emitted unless required.
Reviewed by Duncan Exon Smith and David Blaikie.
llvm-svn: 237851
This reverts commit 0037b6bcbc874aa1b93d7ce3ad8dba3753ee2d9d (r237827).
David Blaikie suggested some alternatives to this which are better. Reverting to apply a better solution later.
llvm-svn: 237849
Ideally this is going to be and LLVM IR pass (shared, among others
with AArch64), but for the time being just enable it if consumers
ask us for optimization and not unconditionally.
Discussed with Tim Northover on IRC.
llvm-svn: 237837
This commit modifies the memory buffer creation in the AsmParser library so
that it requires a terminating null character. The LLLexer in the AsmParser
library checks for EOF only when it sees a null character, thus it would
be best to require it when creating a memory buffer so that the memory
buffer constructor can verify that a terminating null character is indeed
present.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun
Differential Revision: http://reviews.llvm.org/D9883
llvm-svn: 237833
DebugLocDwarfExpression::EmitOp was creating temporary strings by concatenating Twine's.
When emitting to object files, these comments are thrown away.
This commit adds a boolean to the constructor of the DwarfExpression to control whether it will actually emit
any comments. This prevents it from even generating the temporary comments which would have been thrown away anyway.
llvm-svn: 237827
This code appends the filename to the directory then looks that up in a StringMap. We should be using the existing Twine::toStringRef method instead of Twine::str() as most times we'll succeed in the lookup.
Its possible that we should also consider allowing StringMap to lookup a key using a Twine in addition to a StringRef but that would complicate the code with little known benefit above and beyond this change.
This saves 170k temporary allocations when running llc on the verify_use_list_order bitcode with debug info for x86.
llvm-svn: 237823
DAG.FoldConstantArithmetic() can fail even though both operands are
Constants if OpaqueConstants are involved. Continue trying other combine
possibilities in tis case.
Differential Revision: http://reviews.llvm.org/D6946
Somewhat related to PR21801 / rdar://19211454
llvm-svn: 237822
Make sure if we're truncating a constant that would then be sign extended
that the sign extension of the truncated constant is the same as the
original constant.
> Canonicalize min/max expressions correctly.
>
> This patch introduces a canonical form for min/max idioms where one operand
> is extended or truncated. This often happens when the other operand is a
> constant. For example:
>
> %1 = icmp slt i32 %a, i32 0
> %2 = sext i32 %a to i64
> %3 = select i1 %1, i64 %2, i64 0
>
> Would now be canonicalized into:
>
> %1 = icmp slt i32 %a, i32 0
> %2 = select i1 %1, i32 %a, i32 0
> %3 = sext i32 %2 to i64
>
> This builds upon a patch posted by David Majenemer
> (https://www.marc.info/?l=llvm-commits&m=143008038714141&w=2). That pass
> passively stopped instcombine from ruining canonical patterns. This
> patch additionally actively makes instcombine canonicalize too.
>
> Canonicalization of expressions involving a change in type from int->fp
> or fp->int are not yet implemented.
llvm-svn: 237821
Summary:
During icmp lowering it can happen that a constant value can be larger than expected (see the code around the change).
APInt::getMinSignedBits() must be checked again as the shift before can change the constant sign to positive.
I'm not sure it is the best fix possible though.
Test Plan: Regression test included.
Reviewers: resistor, chandlerc, spatel, hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, llvm-commits
Differential Revision: http://reviews.llvm.org/D9147
llvm-svn: 237812
Now that Intrinsic::ID is a typed enum, we can forward declare it and so return it from this method.
This updates all users which were either using an unsigned to store it, or had a now unnecessary cast.
llvm-svn: 237810
r237490 accidentally dropped MCSymbolData from the MCAssembler dump.
Add it back underneath the MCSymbol dump. Remove the MCSymbol dump from
MCSymbolData, since this would cause an infinite co-recursion, and
besides, that back pointer is going away.
llvm-svn: 237807
First ARMTargetParser FIXME, conservatively changing the way we parse CPUs
in the back-end. Still not perfect, with a lot of special cases, but moving
towards a more generic solution.
Moving all logic to the target parser made some unwritten assumptions
about architectures in Clang to break. I've added a lot of architectures
required by Clang, and default to CPUs that Clang believes it should
(and I agree).
I've also added a lot of unit tests, with the correct CPU for each
architecture, and Clang seems to be working correctly, too.
It also became clear that using "unsigned ID" as the argument for the get
methods makes it hard to know what ID, so I also changed the argument names
to match the enum type names.
llvm-svn: 237797
fixed extract-insert i1 element,
load i1, zextload i1 should be with "and $1, %reg" to prevent loading garbage.
added a bunch of new tests.
llvm-svn: 237793
Summary:
For N32/N64, private labels begin with '.L' but for O32 they begin with '$'.
MCAsmInfo now has an initializer function which can be used to provide information from the TargetMachine to control the assembly syntax.
Reviewers: vkalintiris
Reviewed By: vkalintiris
Subscribers: jfb, sandeep, llvm-commits, rafael
Differential Revision: http://reviews.llvm.org/D9821
llvm-svn: 237789
This change implements support for lowering of the gc.relocates tied to the invoke statepoint.
This is acomplished by storing frame indices of the lowered values in "StatepointRelocatedValues" map inside FunctionLoweringInfo instead of storing them in per-basic block structure StatepointLowering.
After this change StatepointLowering is used only during "LowerStatepoint" call and it is not necessary to store it as a field in SelectionDAGBuilder anymore.
Differential Revision: http://reviews.llvm.org/D7798
llvm-svn: 237786
This change adds a new GC strategy for supporting the CoreCLR runtime.
This strategy is currently identical to Statepoint-example GC,
but is necessary for several upcoming changes specific to CoreCLR, such as:
1. Base-pointers not explicitly reported for interior pointers
2. Different format for stack-map encoding
3. Location of Safe-point polls: polls are only needed before loop-back edges and before tail-calls (not needed at function-entry)
4. Runtime specific handshake between calls to managed/unmanaged functions.
llvm-svn: 237753
We were special casing a handful of intrinsics as not needing a safepoint before them. After running into another valid case - memset - I took a closer look and realized that almost no intrinsics need to have a safepoint poll before them. Restructure the code to make that apparent so that we stop hitting these bugs. The only intrinsics which need a safepoint poll before them are ones which can run arbitrary code.
llvm-svn: 237744