* Add a common function to setup opt-remarks
* Rename common options to the same names
* Add error types to distinguish between file errors and regex errors
llvm-svn: 363415
LLD test case will be fixed in a following commit.
Original commit message:
[yaml2obj] - Allow setting custom section types for implicit sections.
We were hardcoding the final section type for sections that
are usually implicit. The patch fixes that.
This also fixes a few issues in existent test cases and removes
one precompiled object.
Differential revision: https://reviews.llvm.org/D63267
llvm-svn: 363401
The docs and help text for --show-parents and --show-children were a bit
inconsistent. The help text claimed they had an effect when "=<offset>"
was used, whereas the doc said it had an effect when "--find" or
"--name" were used. This change changes the doc to mention "=<offset>"
and removes this reference from the help text, to avoid having a very
long description in the help text (it still says "when selectively
printing entries").
Reviewed by: JDevlieghere, aprantl
Differential Revision: https://reviews.llvm.org/D63275
llvm-svn: 363380
We were hardcoding the final section type for sections that
are usually implicit. The patch fixes that.
This also fixes a few issues in existent test cases and removes
one precompiled object.
Differential revision: https://reviews.llvm.org/D63267
llvm-svn: 363377
If dynamic table is missing, output "dynamic strtab not found'. If the index is
out of range, output "Invalid Offset<..>".
https://bugs.llvm.org/show_bug.cgi?id=40807
Reviewed by: jhenderson, grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D63084
Patch by Yuanfang Chen.
llvm-svn: 363374
Despite the fact that .strtab is non-allocatable,
there is no reason to disallow setting the custom address
for it.
The patch also adds a test case showing we can set any address
we want for other implicit sections.
Differential revision: https://reviews.llvm.org/D63137
llvm-svn: 363368
With this patch we get ability to set any flags we want
for implicit sections defined in YAML.
Differential revision: https://reviews.llvm.org/D63136
llvm-svn: 363367
Summary: Tidied up errors during command line parsing to be more consistent with the rest of llvm-objcopy errors.
Reviewers: jhenderson, rupprecht, espindola, alexshap
Reviewed By: jhenderson, rupprecht
Subscribers: emaste, arichardson, MaskRay, llvm-commits, jakehehrlich
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62973
llvm-svn: 363350
Summary: AFAIK, the "sparc" target is big endian and the target for 32-bit little-endian SPARC is denoted as "sparcel". This patch fixes the endianness of "sparc" target and adds "sparcel" target for 32-bit little-endian SPARC.
Reviewers: espindola, alexshap, rupprecht, jhenderson
Reviewed By: jhenderson
Subscribers: jyknight, emaste, arichardson, fedor.sergeev, jakehehrlich, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63251
llvm-svn: 363336
* Add a common function to setup opt-remarks
* Rename common options to the same names
* Add error types to distinguish between file errors and regex errors
llvm-svn: 363328
Filter out irrelevant options
New output:
OVERVIEW: llvm extractor
USAGE: llvm-extract [options] <input bitcode file>
OPTIONS:
Generic Options:
--help - Display available options (--help-hidden for more)
--help-list - Display list of available options (--help-list-hidden for more)
--version - Display the version of this program
llvm-extract Options:
--alias=<alias> - Specify alias to extract
--bb=<function:bb> - Specify <function, basic block> pairs to extract
--delete - Delete specified Globals from Module
-f - Enable binary output on terminals
--func=<function> - Specify function to extract
--glob=<global> - Specify global to extract
-o=<filename> - Specify output filename
--ralias=<ralias> - Specify alias(es) to extract using a regular expression
--recursive - Recursively extract all called functions
--rfunc=<rfunction> - Specify function(s) to extract using a regular expression
--rglob=<rglobal> - Specify global(s) to extract using a regular expression
Differential Revision: https://reviews.llvm.org/D62511
llvm-svn: 363201
Summary:
Use llvm::fouts() as the default stream for outputing. No new stream
should be constructed to output at the same time.
https://bugs.llvm.org/show_bug.cgi?id=42140
Reviewers: jhenderson, grimar, MaskRay, phosek, rupprecht
Reviewed By: rupprecht
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63115
Patch by Yuanfang Chen!
llvm-svn: 363198
This was using its own, outdated list of possible captures. This was
at minimum not catching cmpxchg and addrspacecast captures.
One change is now any volatile access is treated as capturing. The
test coverage for this pass is quite inadequate, but this required
removing volatile in the lifetime capture test.
Also fixes some infrastructure issues to allow running just the IR
pass.
Fixes bug 42238.
llvm-svn: 363169
r363016 let lld-link and llvm-lib share the /machine: parsing code.
This lets llvm-cvtres share it as well.
Making llvm-cvtres depend on llvm-lib seemed a bit strange (it doesn't
need llvm-lib's dependencies on BinaryFormat and BitReader) and I
couldn't find a good place to put this code. Since it's just a few
lines, put it in lib/Object for now.
Differential Revision: https://reviews.llvm.org/D63120
llvm-svn: 363144
Dependent libraries support for the legacy api was committed in a
broken state (see: https://reviews.llvm.org/D60274). This was missed
due to the painful nature of having to integrate the changes into a
linker in order to test. This change implements support for dependent
libraries in the legacy LTO api:
- I have removed the current api function, which returns a single
string, and added functions to access each dependent library
specifier individually.
- To reduce the testing pain, I have made the api functions as thin as
possible to maximize coverage from llvm-lto.
- When doing ThinLTO the system linker will load the modules lazily
when scanning the input files. Unfortunately, when modules are
lazily loaded there is no access to module level named metadata. To
fix this I have added api functions that allow querying the IRSymtab
for the dependent libraries. I hope to expand the api in the future
so that, eventually, all the information needed by a client linker
during scan can be retrieved from the IRSymtab.
Differential Revision: https://reviews.llvm.org/D62935
llvm-svn: 363140
The --print-size help text and documentation claimed that the size was
printed instead of the address, but this is incorrect. It is printed as
well as the address. This patch fixes this issue.
Reviewed by: MaskRay, mtrent, ruiu
Differential Revision: https://reviews.llvm.org/D63142
llvm-svn: 363136
There was a typo in the --ignore-case help text that was copied into the
llvm-dwarfdump command-guide. Additionally, this patch simplifies the
wording, since it was unnecessarily verbose: the switch applies for
searching in general and doesn't need explicitly stating different
search modes (which might go out-of-date as options are added or
removed).
Reviwed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D63133
llvm-svn: 363066
For lld, pass in Config->Timestamp (which is set based on lld's
/timestamp: and /Brepro flags). Since the writeWindowsResourceCOFF()
data is only used in-memory by LLD and the obj's timestamp isn't used
for anything in the output, this doesn't change behavior.
For llvm-cvtres, add an optional /timestamp: parameter, and use the
current behavior of calling time() if the parameter is not passed in.
This doesn't really change observable behavior (unless someone passes
/timestamp: to llvm-cvtres, which wasn't possible before), but it
removes the last unqualified call to time() from llvm/lib, which seems
like a good thing.
Differential Revision: https://reviews.llvm.org/D63116
llvm-svn: 363050
-o is in the documentation, but not in the llvm-dwarfdump help text.
This patch adds it by inverting the -o and --out-file aliasing. It also
removes --out-file from the documentation, since we don't really want
people to be using this switch in practice.
Reviewed by: aprantl, JDevlieghere, dblaikie
Differential Revision: https://reviews.llvm.org/D63013
llvm-svn: 363044
Allow using both custom numeric and string values for Link field of the
dynamic and regular symbol tables.
Differential revision: https://reviews.llvm.org/D63077
llvm-svn: 363042
This makes the interface simpler and more consistent with the interface for
.dSYM files and fixes a bug where llvm-symbolizer would not read the dwp if
it was asked to symbolize data before symbolizing code.
Differential Revision: https://reviews.llvm.org/D63114
llvm-svn: 363025
Summary:
When llvm-objcopy sorts sections during finalization, it only sorts based on the offset, which can cause the group section to come after the sections it contains. This causes link failures when using gold to link objects created by llvm-objcopy.
Fix this for now by copying GNU objcopy's behavior of placing SHT_GROUP sections first. In the future, we may want to remove this sorting entirely to more closely preserve the input file layout.
This fixes https://bugs.llvm.org/show_bug.cgi?id=42052.
Reviewers: jakehehrlich, jhenderson, MaskRay, espindola, alexshap
Reviewed By: MaskRay
Subscribers: phuongtrang148993, emaste, arichardson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62620
llvm-svn: 362973
Bottleneck Analysis is one of the many views available in llvm-mca. Therefore,
it should be enabled when flag -all-views is passed in input to the tool.
llvm-svn: 362964
This is a follow-up for D62809.
Content and Size fields should be optional as was discussed in comments
of the D62809's thread. With that, we can describe a specific string table and
symbol table sections in a more correct way and also show appropriate errors.
The patch adds lots of test cases where the behavior is described in details.
Differential revision: https://reviews.llvm.org/D62957
llvm-svn: 362931
We have a code in buildSectionIndex() that adds implicit sections:
// Add special sections after input sections, if necessary.
for (StringRef Name : implicitSectionNames())
if (SN2I.addName(Name, SecNo)) {
// Account for this section, since it wasn't in the Doc
++SecNo;
DotShStrtab.add(Name);
}
The problem arises when .dynsym is specified explicitly and no
DynamicSymbols is used. In that case, we do not add
.dynstr implicitly and will assert later when will try to set Link
for .dynsym.
Seems, in this case, reasonable behavior is to allow Link field to be zero.
This is what this patch does.
Differential revision: https://reviews.llvm.org/D63001
llvm-svn: 362929
Summary:
Recompute and update offset/size fields so that we can implement llvm-objcopy options like --only-section.
This patch is the first step and focuses on supporting load commands that covered by existing tests: executable files and
dynamic libraries are not supported.
Reviewers: alexshap, rupprecht, jhenderson
Reviewed By: alexshap, rupprecht
Subscribers: compnerd, jakehehrlich, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62652
llvm-svn: 362863
Summary:
This fixes the bugzilla id,41862 to support dealing with checking
stop address against start address to support this not being a
proper object to check the disasembly against like gnu objdump
currently does.
Reviewers: jakehehrlich, rupprecht, echristo, jhenderson, grimar
Reviewed By: jhenderson
Subscribers: MaskRay, smeenai, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61969
Patch by Nicholas Krause!
llvm-svn: 362847
Displays the architecture names of an input file.
Unknown architectures are represented by unknown(cputype,cpusubtype).
Patch by Anusha Basana <anusha.basana@gmail.com>
Differential Revision: https://reviews.llvm.org/D62753
llvm-svn: 362840
This implements the functionality described in
https://lld.llvm.org/Partitions.html. It works as follows:
- Reads the section headers using the ELF header at file offset 0;
- If extracting a loadable partition:
- Finds the section containing the required partition ELF header by looking it up in the section table;
- Reads the ELF and program headers from the section.
- If extracting the main partition:
- Reads the ELF and program headers from file offset 0.
- Filters the section table according to which sections are in the program headers that it read:
- If ParentSegment != nullptr or section is not SHF_ALLOC, then it goes in.
- Sections containing partition ELF headers or program headers are excluded as there are no headers for these in ordinary ELF files.
Differential Revision: https://reviews.llvm.org/D62364
llvm-svn: 362818
Francis Visoiu Mistrih