warning options to setup diagnostic state, but should not be emitting warnings as these would be
rudndant with what the frontend emits.
rdar://13001556
llvm-svn: 172497
flag information down from the Clang driver into the Gold linker plugin
for LTO. This allows specifying -march on the linker commandline and
should hopefully have it pass all the way through to the LTO optimizer.
Fixes PR14697.
llvm-svn: 172354
The test should be looking for gcrt0.o not crt0.o. Clang was already printing
"gcrt0", but the test was looking for "{{.*}}crt0.o", and the .* regexp
consumed "g".
Patch by Brad Smith.
llvm-svn: 171815
Our internal buildbot just failed because the tempfile happened to be named
'nodefaultlib-lcGA7k.o', which contains the substring '-lc'.
llvm-svn: 170941
This also requires adding support to -cc1as for passing the detecting
PWD down through LLVM's debug info (which in turn required the LLVM
change in r170371).
The test case is weak (we only test the driver behavior) because there
is currently to infrastructure for running cc1as in the test suite. So
those four lines are untested (much like all other lines in that file),
but we have a test for the same pattern using llvm-mc in the LLVM
repository.
llvm-svn: 170373
Add -fslp-vectorize (with -ftree-slp-vectorize as an alias for gcc compatibility)
to provide a way to enable the basic-block vectorization pass. This uses the same
acronym as gcc, superword-level parallelism (SLP), also common in the literature,
to refer to basic-block vectorization.
Nadav suggested this as a follow-up to the adding of -fvectorize.
llvm-svn: 169909
We don't want to relax all instructions in
$ clang -c test.s
since most users don't pass -O when using the driver to assemble.
On the other hand, -save-temps should not change the output unnecessary, so in
$ clang -c test.c -save-temps
we should relax all instructions.
llvm-svn: 169815
Linux too, as I think we inherited it from there. The ABI spec says 128-bit,
although I think SGI's compiler on IRIX may be the only thing ever to support
this.
llvm-svn: 169674
* Look for i686-linux-android under <sysroot>/lib/gcc.
* This patch also slightly enhance the test suite for
Android GCC toolchain detection.
llvm-svn: 169557
ToolChains.cpp
This is in anticipation of forthcoming library path changes.
Also ...
- Fixes some inconsistencies in how the arch is passed to tools.
- Add test cases for various forms of arch flags
llvm-svn: 169505
paths
- Inherit from Linux rather than ToolChain
- Override AddClangSystemIncludeArgs and AddClangCXXStdlibIncludeArgs
to properly set include paths.
llvm-svn: 169495
This ensures that even though it comes first, we pick up its .o files.
Note that if we can use this (or something similar / equivalent) on
other platforms, we could potentially remove
ReplaceOperatorsNewAndDelete from the ASan runtimes.
We should probably do something similar for TSan and MSan as well.
llvm-svn: 169328
the link command. This all works fine when the driver is also responsible for
adding -lstdc++ to the link command. But, if -lstdc++ (or libstdc++.a, etc) is
passed explicitly to the driver, the ASan runtime will appear in the link
command after the standard library, leading to multiple-definition errors for
the global 'operator new' and 'operator delete'. Fix this in a painfully
simple way, by inserting libclang_rt.asan.a at the start of the link command
instead of the end.
If we need to do something more clever, we can walk the link command looking
for something that resembles libstdc++ and insert libclang_rt.asan.a as late
as possible, but the simple solution works for now.
llvm-svn: 169310
1) init-order sanitizer: initialization-order checker.
Status: usable, but may produce false positives w/o proper blacklisting.
2) use-after-return sanitizer
Status: implemented, but heavily understed.
Should be optional, as it significanlty slows program down.
3) use-after-scope sanitizer
Status: in progress.
llvm-svn: 168950
Previously, this flag to CC1 was never exposed at the clang driver
layer, and if you happened to enable it (by being on Android or GCC 4.7
platform), you couldn't *disable* it, because there was no 'no' variant.
The whole thing was confusingly implemented.
Now, the target-specific flag processing gets the driver arg list, and
we use standard hasFlag with a default based on the GCC version and/or
Android platform. The user can still pass the 'no-' variant to forcibly
disable the flag, or pass the positive variant to clang itself to enable
the flag.
The test has also been substantially cleaned up and extended to cover
these use cases.
llvm-svn: 168473
According to Android ABI, we have to link with
libdl.so, if we are linking with non-static libgcc.
Besides, this also fixes MIPS link error of
undefined references to `_Unwind_Find_FDE' and
`dl_iterate_phdr'.
llvm-svn: 168310
The dynamic linker of Android does not support .ctors/.dtors.
We should emit .init_array and .fini_array regardless the
gcc version.
NOTE: This patch does not affect the ARM backend, because
it is required to generate .init_array and .fini_array
for program targeting ARM AAPCS and AEABI.
llvm-svn: 168309
There were numerous issues here that were all entangled, and so I've
tried to do a general simplification of the logic.
1) The logic was mimicing actual GCC bugs, rather than "features". These
have been fixed in trunk GCC, and this fixes Clang as well. Notably,
the logic was always intended to be last-match-wins like any other
flag.
2) The logic for handling '-mdynamic-no-pic' was preposterously unclear.
It also allowed the use of this flag on non-Darwin platforms where it
has no actual meaning. Now this option is handled directly based on
tests of how llvm-gcc behaves, and it is only supported on Darwin.
3) The APIs for the Driver's ToolChains had the implementation ugliness
of dynamic-no-pic leaking through them. They also had the
implementation details of the LLVM relocation model flag names
leaking through.
4) The actual results of passing these flags was incorrect on Darwin in
many cases. For example, Darwin *always* uses PIC level 2 if it uses
in PIC level, and Darwin *always* uses PIC on 64-bit regardless of
the flags specified, including -fPIE. Darwin never compiles in PIE
mode, but it can *link* in PIE mode.
5) Also, PIC was not always being enabled even when PIE was. This isn't
a supported mode at all and may have caused some fallout in builds
with complex PIC and PIE interactions.
The result is (I hope) cleaner and clearer for readers. I've also left
comments and tests about some of the truly strage behavior that is
observed on Darwin platforms. We have no real testing of Windows
platforms and PIC, but I don't have the tools handy to figure that out.
Hopefully others can beef up our testing here.
Unfortunately, I can't test this for every platform. =/ If folks have
dependencies on these flags that aren't covered by tests, they may
break. I've audited and ensured that all the changes in behavior of the
existing tests are intentional and good. In particular I've tried to
make sure the Darwin behavior (which is more suprising than the Linux
behavior) also matches that of 'gcc' on my mac.
llvm-svn: 168297
This was causing different behavior when using -x objective-c++-cpp-output as
compared to -x objc++-cpp-output. Specifically, the driver was not adding the
-fcxx-exceptions flag in the latter case.
rdar://12680312
llvm-svn: 168212
to a cc1 -fencode-extended-block-signature and pass it
to cc1 and recognize this option to produce extended block
type signature. // rdar://12109031
llvm-svn: 168063
- Separately check if -fPIE was specified in the command line and define both __PIC__ and __PIE__ when -fPIE is used. We need to check this separately because -fPIE will infer -fPIC even if its not explicitly used.
- Fixed existing tests.
- Added new tests for cases where both -fPIC and -fPIE is used.
Author: Tareq A. Siraj <tareq.a.siraj@intel.com>
Fixes: PR13221
Review: http://llvm-reviews.chandlerc.com/D94
llvm-svn: 167846
-fno-address-sanitizer, -fthread-sanitizer, -fno-thread-sanitizer, and
-fcatch-undefined-behavior as deprecated: produce a warning if they are used
pointing to the corresponding -fsanitize= option. In passing add the missing
'-' to some diagnostics.
llvm-svn: 167429
-fno-sanitize=<sanitizers> argument to driver. These allow ASan, TSan, and the
various UBSan checks to be enabled and disabled separately. Right now, the
different modes can't be combined, but the intention is that combining UBSan
and the other sanitizers will be permitted in the near future.
Currently, the UBSan checks will all be enabled if any of them is; that will be
fixed by the next patch.
llvm-svn: 167411
diagnostics script.
This addresses the FIXME pertaining to quoted arguments. We also delineate
between those flags that have an argument (e.g., -D macro, -MF file) and
those that do not (e.g., -M, -MM, -MG). Finally, we add the -dwarf-debug-flags
to the list of flags to be removed.
rdar://12329974
llvm-svn: 167152
is not a directory, Driver::GetProgramPath() routine does not try to append
the program name as a "path component" to it. It just joins the "prefix" with
the program name and checks the resulting path existence.
The patch reviewed by Rafael Espindola.
llvm-svn: 167114
later, '-L <dir>' is allowed, but rewrite these in the driver as '-L<dir>' to
maintain backward compatibility. The same is true for the -I option.
rdar://12366753
llvm-svn: 167054
we had the -ccc-clang-cxx and -ccc-no-clang-cxx options to force them
on or off for testing.
Clang c++ support is now production quality and these options are dead.
llvm-svn: 166986
clang itself. This dates back to clang's early days and while it looks like
some of it is still used (for kext for example), other parts are probably dead.
Remove the -ccc-clang-archs option and associated code. I don't think there
is any remaining setup where clang doesn't support an architecture but it can
expect an working gcc cross compiler to be available.
A nice side effect is that tests no longer need to differentiate architectures
that are included in production builds of clang and those that are not.
llvm-svn: 165545
With this patch Bitrig can use a different c++ library without pain and
within the normal commandline parameters.
Original patch by David Hill, with lots of fixes and cleanup by me.
llvm-svn: 165430
The darwin change should be a nop since Triple::getArchTypeForDarwinArchName
doesn't know about amd64.
If things like amd64-mingw32 are to be rejected, we should print a error
earlier on instead of silently using the wrong abi.
Remove old comment that looks out of place, this is "in clang".
llvm-svn: 165368
crtfastmath.o contains routines to set the floating point flags to a faster,
unsafe mode. Linking it in speeds up code dealing with denormals significantly
(PR14024).
For now this is only enabled on linux where I can test it and crtfastmath.o is
widely available. We may want to provide a similar file with compiler-rt
eventually and/or enable it on other platforms too.
llvm-svn: 165240
1. Add mipsel-linux-android to the list of valid MIPS target triples.
2. Add <gcc install path>/mips-r2 to the list of toolchain specific path
prefixes if target is mipsel-linux-android.
The patch reviewed by Logan Chien.
llvm-svn: 165131
While it might be nice to have a quick end-to-end sanity test, it's just not
really the right place for it & would require more work to enable lit to
provide a detection flag ("XFAIL: cross" or similar) than the value we get from
having this test. Early on it might've made more sense, but these days we've
got some pretty good coverage across the stack with more targeted tests.
llvm-svn: 164314
The Freescale SDK is based on OpenEmbedded, and this might be useful
for other OpenEmbedded-based configurations as well.
With minor modifications, patch by Tobias von Koch!
llvm-svn: 164177
Android uses the same flavour of crt*.o for PIE and non-PIE executables, and a
different one for DSOs. GNU/Linux, on the other hand, uses one set of crt*.o
for non-PIE executables, and another for both PIE executables and DSOs.
llvm-svn: 163500
This change adds detection of C++ headers and libraries paths when
building with the standalone toolchain from Android NDK. They are in a
slightly unusual place.
llvm-svn: 163109
Most of the code guarded with ANDROIDEABI are not
ARM-specific, and having no relation with arm-eabi.
Thus, it will be more natural to call this
environment "Android" instead of "ANDROIDEABI".
Note: We are not using ANDROID because several projects
are using "-DANDROID" as the conditional compilation
flag.
llvm-svn: 163088
diagnostics for bad deployment targets and adding a few
more predicates. Includes a patch by Jonathan Schleifer
to enable ARC for ObjFW.
llvm-svn: 162252
If you build with -fobjc-arc, then -fobjc-link-runtime is implied but we
don't need to warn about it being unused in that case. rdar://12039965
llvm-svn: 161444
'clang-cpp'.
For now, the test uses "REQUIRES: shell" to determine if the host system
supports "ln -s", which it uses to create a 'clang-cpp' symlink. This is a bit
hacky and should likely be directly supported by lit.cfg.
llvm-svn: 161317
assembly.
By default, we don't emit IR for MS-style inline assembly (see r158833 as to
why). This is strictly for testing purposes and should not be enabled with the
expectation that things will work. This is a temporary flag and will be removed
once MS-style inline assembly is fully supported.
llvm-svn: 160573
The hack of recognizing a -D__IPHONE_OS_VERSION_MIN_REQUIRED option
in place of -mios-simulator-version-min leaves the Darwin version
unspecified. It can be set separately with -mmacosx-version-min (which
makes no sense) or inferred to match the host version (which is unpredictable
and usually wrong). This really needs to get cleaned up, but in the
meantime, force the OS X version to 10.6 so that the behavior is sane for
the iOS simulator. Thanks for Argyrios for the patch.
<rdar://problem/11858187>
llvm-svn: 160484
- lib/Driver/Driver.cpp, tools/driver/driver.cpp: Exit status should not be propagated, although clang driver should catch exceptions.
- test/Driver/crash-report.c: Add REQUIRES:shell for now.
FIXME: setenv should work also on Lit.InternalShellRunner.
- test/Driver/crash-report.c: Remove XFAIL.
Thanks to Chad, To point out the issue.
llvm-svn: 160343
Lots of tests are using an explicit target triple w/o first checking that the
target is actually available. Add a REQUIRES clause to a bunch of them. This should
hopefully unbreak bots which don't configure w/ all targets enabled.
llvm-svn: 159949
- Split pedantic driver flag test into separate test file, and XFAIL on cygwin,mingw32
- Fix bug in tablegen logic where a missing '{' caused errors to be included in -Wpedantic.
llvm-svn: 159892
I suspect FileCheck might match assertion failure, even if clang/test/Misc/warning-flags.c passed the test.
> 0. Program arguments: bin/./clang -### -pedantic -Wpedantic clang/test/Driver/warning-options.cpp
llvm-svn: 159886
This patch introduces some magic in tablegen to create a "Pedantic" diagnostic
group which automagically includes all warnings that are extensions. This
allows a user to suppress specific warnings traditionally under -pedantic used
an ordinary warning flag. This also allows users to use #pragma to silence
specific -pedantic warnings, or promote them to errors, within blocks of text
(just like any other warning).
-Wpedantic is NOT an alias for -pedantic. Instead, it provides another way
to (a) activate -pedantic warnings and (b) disable them. Where they differ
is that -pedantic changes the behavior of the preprocessor slightly, whereas
-Wpedantic does not (it just turns on the warnings).
The magic in the tablegen diagnostic emitter has to do with computing the minimal
set of diagnostic groups and diagnostics that should go into -Wpedantic, as those
diagnostics that already members of groups that themselves are (transitively) members
of -Wpedantic do not need to be included in the Pedantic group directly. I went
back and forth on whether or not to magically generate this group, and the invariant
was that we always wanted extension warnings to be included in -Wpedantic "some how",
but the bookkeeping would be very onerous to manage by hand.
-no-pedantic (and --no-pedantic) is included for completeness, and matches many of the
same kind of flags the compiler already supports. It does what it says: cancels out
-pedantic. One discrepancy is that if one specifies --no-pedantic and -Weverything or
-Wpedantic the pedantic warnings are still enabled (essentially the -W flags win). We
can debate the correct behavior here.
Along the way, this patch nukes some code in TextDiagnosticPrinter.cpp and CXStoredDiagnostic.cpp
that determine whether to include the "-pedantic" flag in the warning output. This is
no longer needed, as all extensions now have a -W flag.
This patch also significantly reduces the number of warnings not under flags from 229
to 158 (all extension warnings). That's a 31% reduction.
llvm-svn: 159875
This flag sets the 'fp-contract' mode, which controls the formation of fused
floating point operations. Available modes are:
- Fast: Form fused operations anywhere.
- On: Form fused operations where allowed by FP_CONTRACT. This is the default
mode.
- Off: Don't form fused operations (in future this may be relaxed to forming
fused operations where it can be proved that the result won't be
affected).
Currently clang doesn't support the FP_CONTRACT pragma, so the 'On' and 'Off'
modes are equivalent.
llvm-svn: 159794
By default on OS X 10.8, we don't link with a crt1.o file and the linker
knows to use _main as the entry point. But, when compiling with -pg, we
need to link with the gcrt1.o file, and the linker needs to be told to use
the "start" symbol as the entry point. The -no_new_main linker option does
that last part. <rdar://problem/11491405>
llvm-svn: 159683
This adds validation that the
* repro source is only rewrite-includes processed, not fully preprocessed.
* repro script contains macro definitions (-DFOO=BAR).
Based on suggestions/help by Matt Beaumont-Gay.
llvm-svn: 159605
In future changes we should:
* use __builtin_trap rather than derefing 'random' volatile pointers.
* avoid dumping temporary files into /tmp when running tests, instead
preferring a location that is properly cleaned up by lit.
Review by Chandler Carruth.
llvm-svn: 159469
target Objective-C runtime down to the frontend: break this
down into a single target runtime kind and version, and compute
all the relevant information from that. This makes it
relatively painless to add support for new runtimes to the
compiler. Make the new -cc1 flag, -fobjc-runtime=blah-x.y.z,
available at the driver level as a better and more general
alternative to -fgnu-runtime and -fnext-runtime. This new
concept of an Objective-C runtime also encompasses what we
were previously separating out as the "Objective-C ABI", so
fragile vs. non-fragile runtimes are now really modelled as
different kinds of runtime, paving the way for better overall
differentiation.
As a sort of special case, continue to accept the -cc1 flag
-fobjc-runtime-has-weak, as a sop to PLCompatibilityWeak.
I won't go so far as to say "no functionality change", even
ignoring the new driver flag, but subtle changes in driver
semantics are almost certainly not intended.
llvm-svn: 158793
option. On the driver, check if we are using libraries from gcc 4.7 or newer
and if so pass -fuse-init-array to the frontend.
The crtbegin*.o files in gcc 4.7 no longer call the constructors listed in
.ctors, so we have to use .init_array.
llvm-svn: 158694
Douglas Gregor