Header files included wrongly using <...> are now included using the
internal path names as the new unittest framework allows us to do so.
Reviewers: phosek, abrachet
Differential Revision: https://reviews.llvm.org/D72743
It's been an empty target since r360498 and friends
(`git log --grep='Move InstPrinter files to MCTargetDesc.' llvm/lib/Target`),
but due to hwo the way these targets are structured it was silently
an empty target without anyone noticing.
No behavior change.
A TemplateIdAnnotation represents only a template-id, not a
nested-name-specifier plus a template-id. Don't make a redundant copy of
the CXXScopeSpec and store it on the template-id annotation.
This slightly improves error recovery by more properly handling the case
where we would form an invalid CXXScopeSpec while parsing a typename
specifier, instead of accidentally putting the token stream into a
broken "annot_template_id with a scope specifier, but with no preceding
annot_cxxscope token" state.
Summary:
Detect a run of memory tagging instructions for adjacent stack frame slots,
and replace them with a shorter instruction sequence
* replace STG + STG with ST2G
* replace STGloop + STGloop with STGloop
This code needs to run when stack slot offsets are already known, but before
FrameIndex operands in STG instructions are eliminated; that's the
reason for the new hook in PrologueEpilogue.
This change modifies STGloop and STZGloop pseudos to take the size as an
immediate integer operand, and adds _untied variants of those pseudos
that are allowed to take the base address as a FI operand. This is needed to
simplify recognizing an STGloop instruction as operating on a stack slot
post-regalloc.
This improves memtag code size by ~0.25%, and it looks like an additional ~0.1%
is possible by rearranging the stack frame such that consecutive STG
instructions reference adjacent slots (patch pending).
Reviewers: pcc, ostannard
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70286
Static method MemoryDependenceResults::getLoadLoadClobberFullWidthSize
does not have or use any info specific to MemoryDependenceResults.
Move it to its only user: VNCoercion.
Runtimes variables in a multi-target environment are defined like:
RUNTIMES_target_VARIABLE_NAME
RUNTIMES_target+multi_VARIABLE_NAME
In my case, I have a downstream runtimes cache that does the following:
set(RUNTIMES_${target}+except_LIBCXXABI_ENABLE_EXCEPTIONS ON CACHE BOOL "")
set(RUNTIMES_${target}_LIBCXX_ENABLE_EXCEPTIONS OFF CACHE BOOL "")
I found that I was always getting the 'target' variable value (OFF) in
my 'target+except' build, which was unexpected. This behavior was
caused by the loop in llvm/runtimes/CMakeLists.txt that runs through all
variable names, adding '-DVARIABLE_NAME=' options to the subsequent
external project's cmake command.
The issue is that the loop does a single pass, such that if the 'target'
value appears in the cache after the 'target+except' value, the 'target'
value will take precedence. I suggest in my change here that the more
specific 'target+except' value should take precedence always, without
relying on CMake cache ordering.
Differential Revision: https://reviews.llvm.org/D71570
Patch By: JamesNagurne
This is an alternative to the continous mode that was implemented in
D68351. This mode relies on padding and the ability to mmap a file over
the existing mapping which is generally only available on POSIX systems
and isn't suitable for other platforms.
This change instead introduces the ability to relocate counters at
runtime using a level of indirection. On every counter access, we add a
bias to the counter address. This bias is stored in a symbol that's
provided by the profile runtime and is initially set to zero, meaning no
relocation. The runtime can mmap the profile into memory at abitrary
location, and set bias to the offset between the original and the new
counter location, at which point every subsequent counter access will be
to the new location, which allows updating profile directly akin to the
continous mode.
The advantage of this implementation is that doesn't require any special
OS support. The disadvantage is the extra overhead due to additional
instructions required for each counter access (overhead both in terms of
binary size and performance) plus duplication of counters (i.e. one copy
in the binary itself and another copy that's mmapped).
Differential Revision: https://reviews.llvm.org/D69740
Summary:
This patch adds a new target info object called LinuxRemoteTI.
Unlike LinuxLocalTI, which asks the host system about various things
like available locales, distribution name etc. which don't make sense
if we're testing on a remote board, LinuxRemoteTI uses SSHExecutor
to get information from the target system.
Reviewers: jroelofs, ldionne, bcraig, EricWF, danalbert, mclow.lists
Reviewed By: jroelofs
Subscribers: christof, dexonsmith, libcxx-commits
Tags: #libc
Differential Revision: https://reviews.llvm.org/D72847
Summary:
This is a simple extension to allow vectorization to work not only on GenericLinalgOp
but more generally across named ops too.
For now, this still only vectorizes matmul-like ops but is a step towards more
generic vectorization of Linalg ops.
Reviewers: ftynse
Subscribers: mehdi_amini, rriddle, jpienaar, burmako, shauheen, antiagainst, arpith-jacob, mgester, lucyrfox, aartbik, liufengdb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72942
As of D70146 lld GCs comdats as a group and no longer considers notes in
comdats to be GC roots, so we need to move the note to a comdat with a GC root
section (.init_array) in order to prevent lld from discarding the note.
Differential Revision: https://reviews.llvm.org/D72936
Summary:
First step towards the consolidation
of a lot of vector related utilities
that are now all over the place
(or even duplicated).
Reviewers: nicolasvasilache, andydavis1
Reviewed By: nicolasvasilache, andydavis1
Subscribers: merge_guards_bot, mehdi_amini, rriddle, jpienaar, burmako, shauheen, antiagainst, arpith-jacob, mgester, lucyrfox, liufengdb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72955
Extend -fxray-instrumentation-bundle to split function-entry and
function-exit into two separate options, so that it is possible to
instrument only function entry or only function exit. For use cases
that only care about one or the other this will save significant overhead
and code size.
Differential Revision: https://reviews.llvm.org/D72890
XRay allows tuning by minimum function size, but also always instruments
functions with loops in them. If the minimum function size is set to a
large value the loop instrumention ends up causing most functions to be
instrumented anyway. This adds a new flag, -fxray-ignore-loops, to disable
the loop detection logic.
Differential Revision: https://reviews.llvm.org/D72873
XRay allows tuning by minimum function size, but also always instruments
functions with loops in them. If the minimum function size is set to a
large value the loop instrumention ends up causing most functions to be
instrumented anyway. This adds a new flag, xray-ignore-loops, to disable
the loop detection logic.
Differential Revision: https://reviews.llvm.org/D72659
Summary:
As discussed on the mailing list, I plan to introduce an ml-compatible MASM assembler as part of providing more of the Windows build tools. This will be similar to llvm-mc, but with different command-line parameters.
This placeholder is purely a stripped-down version of llvm-mc; we'll eventually add support for the Microsoft-style command-line flags, and back it with a MASM parser.
Reviewers: rnk, thakis
Reviewed By: thakis
Subscribers: merge_guards_bot, mgorny, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72679
This essentially reverts b841e119d7.
Such code construct can be used in the following way:
// glibc/stdlib/exit.c
// clang -fuse-ld=lld => succeeded
// clang -fuse-ld=lld -fpie -pie => relocation R_PLT_PC cannot refer to absolute symbol
__attribute__((weak, visibility("hidden"))) extern void __call_tls_dtors();
void __run_exit_handlers() {
if (__call_tls_dtors)
__call_tls_dtors();
}
Since we allow R_PLT_PC in -no-pie mode, it makes sense to allow it in
-pie mode as well.
Reviewed By: pcc
Differential Revision: https://reviews.llvm.org/D72943
[this re-applies c0176916a4
with the correct commit message and phabricator link]
This addresses point 1 of PR44213.
https://bugs.llvm.org/show_bug.cgi?id=44213
The DW_AT_LLVM_sysroot attribute is used for Clang module debug info,
to allow LLDB to import a Clang module from source. Currently it is
part of each DW_TAG_module, however, it is the same for all modules in
a compile unit. It is more efficient and less ambiguous to store it
once in the DW_TAG_compile_unit.
This should have no effect on DWARF consumers other than LLDB.
Differential Revision: https://reviews.llvm.org/D71732
Summary:
This op is the counterpart to LLVM's atomicrmw instruction. Note that
volatile and syncscope attributes are not yet supported.
This will be useful for upcoming parallel versions of `affine.for` and generally
for reduction-like semantics.
Differential Revision: https://reviews.llvm.org/D72741
Summary:
This is a temporary implementation to support Flang. The LLVM-IR parser
will need to be extended in some way to support recursive types. The
exact approach here is still a work-in-progress.
Unfortunately, this won't pass roundtrip testing yet. Adding a comment
to the test file as a reminder.
Differential Revision: https://reviews.llvm.org/D72542
Summary:
This commit modifies the way `ExecuteCommand` works in fuchsia by adding
special logic to handle `/dev/null`.
The FuzzerCommand interface does not have a way to "discard" the output,
so other parts of the code just set the output file to `getDevNull()`.
The problem is that fuchsia does not have a named file that is
equivalent to `/dev/null`, so opening that file just fails.
This commit detects whether the specified output file is `getDevNull`,
and if that's the case, it will not copy the file descriptor for stdout
in the spawned process.
NOTE that modifying `FuzzerCommand` to add a "discardOutput" function
involves a significant refactor of all the other platforms, as they all
rely on the `toString()` method of `FuzzerCommand`.
This allows libfuzzer in fuchsia to run with `fork=1`, as the merge
process (`FuzzerMerge.cpp`) invoked `ExecuteCommand` with `/dev/null` as the
output.
Reviewers: aarongreen, phosek
Reviewed By: aarongreen
Subscribers: #sanitizers, llvm-commits
Tags: #sanitizers, #llvm
Differential Revision: https://reviews.llvm.org/D72894
Summary:
* Pass the Scalability test to VectorType::get in order to be
able to deserialize bitcode that contains scalable vector operations
Change-Id: I37fe5b1c0c237a9153130deefdc1a6d595c7f12e
Reviewers: efriedma, pcc, sdesmalen, apazos, huihuiz, chrisj
Reviewed By: sdesmalen
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72792
Matt Arsenault