Make it so. (This patch is in LowerCall_Darwin, which seems
to be used by SVR4 code as well; since that doesn't belong here,
I haven't worried about this case.)
llvm-svn: 98077
The PowerPC floating point registers can represent both f32 and f64 via the
two register classes F4RC and F8RC. F8RC is considered a subclass of F4RC to
allow cross-class coalescing. This coalescing only affects whether registers
are spilled as f32 or f64.
Spill slots must be accessed with load/store instructions corresponding to the
class of the spilled register. PPCInstrInfo::foldMemoryOperandImpl was looking
at the instruction opcode which is wrong.
X86 has similar floating point register classes, but doesn't try to fold
memory operands, so there is no problem there.
llvm-svn: 97262
to adding them in a determinstic order (bottom up from
the root) based on the structure of the graph itself.
This updates tests for some random changes, interesting
bits: CodeGen/Blackfin/promote-logic.ll no longer crashes.
I have no idea why, but that's good right?
CodeGen/X86/2009-07-16-LoadFoldingBug.ll also fails, but
now compiles to have one fewer constant pool entry, making
the expected load that was being folded disappear. Since it
is an unreduced mass of gnast, I just removed it.
This fixes PR6370
llvm-svn: 97023
induction variable value and a loop-variant value, don't force the
insert position to be at the post-increment position, because it may
not be dominated by the loop-variant value. This fixes a
use-before-def problem noticed on PPC.
llvm-svn: 96774
stack frame, the prolog/epilog code was using the same
register for the copy of CR and the address of the save slot. Oops.
This is fixed here for Darwin, sort of, by reserving R2 for this case.
A better way would be to do the store before the decrement of SP,
which is safe on Darwin due to the red zone.
SVR4 probably has the same problem, but I don't know how to fix it;
there is no red zone and R2 is already used for something else.
I'm going to leave it to someone interested in that target.
Better still would be to rewrite the CR-saving code completely;
spilling each CR subregister individually is horrible code.
llvm-svn: 96015
following it. However, the EmitGlobalConstant method wasn't emitting a body for
the constant. The assembler doesn't like that. Before, we were generating this:
.zerofill __DATA, __common, __cmd, 1, 3
This fix puts us back to that semantic.
llvm-svn: 95336
doing global variable classification anymore) and hookized, sink almost
all target targets global variable emission code into AsmPrinter and out
of each target.
Some notes:
1. PIC16 does completely custom and crazy stuff, so it is not changed.
2. XCore has some custom handling for extra directives. I'll look at it next.
3. This switches linux/ppc to use .globl instead of .global. If .globl is
actually wrong, let me know and I'll fix it.
4. This makes linux/ppc get a lot of random cases right which were obviously
wrong before, it is probably now a bit healthier.
5. Blackfin will probably start getting .comm and other things that it didn't
before. If this is undesirable, it should explicitly opt out of these
things by clearing the relevant fields of MCAsmInfo.
This leads to a nice diffstat:
14 files changed, 127 insertions(+), 830 deletions(-)
llvm-svn: 93858
different BlockAddress labels, but nothing semantically important.
Add a FIXME that BlockAddress codegen is broken if the LLVM BB has
an empty name (e.g. strip was run).
llvm-svn: 93303
in local register allocator. If a reg-reg copy has a phys reg
input and a virt reg output, and this is the last use of the phys
reg, assign the phys reg to the virt reg. If a reg-reg copy has
a phys reg output and we need to reload its spilled input, reload
it directly into the phys reg than passing it through another reg.
Following 76208, there is sometimes no dependency between the def of
a phys reg and its use; this creates a window where that phys reg
can be used for spilling (this is true in linear scan also). This
is bad and needs to be fixed a better way, although 76208 works too
well in practice to be reverted. However, there should normally be
no spilling within inline asm blocks. The patch here goes a long way
towards making this actually be true.
llvm-svn: 91485
This violates the ABI (that area is "reserved"), and
while it is safe if all code is generated with current
compilers, there is some very old code around that uses
that slot for something else, and breaks if it is stored
into. Adjust testcases looking for current behavior.
I've verified that the stack frame size is right in all
testcases, whether it changed or not. 7311323.
llvm-svn: 89811
constant whose component type is not a legal type for the target.
(If the target ConstantPool cannot handle this type either, it has
an opportunity to merge elements. In practice any target with
8-bit bytes must support i8 *as data*). 7320806 (partial).
llvm-svn: 86751
generates a sequence similar to this:
__Z4funci:
LFB2:
mflr r0
LCFI0:
stmw r30,-8(r1)
LCFI1:
stw r0,8(r1)
LCFI2:
stwu r1,-80(r1)
LCFI3:
mr r30,r1
LCFI4:
where LCFI3 and LCFI4 are used by the FDE to indicate what the FP, LR, and other
things are. We generated something more like this:
Leh_func_begin1:
mflr r0
stw r31, 20(r1)
stw r0, 8(r1)
Llabel1:
stwu r1, -80(r1)
Llabel2:
mr r31, r1
Note that we are missing the "mr" instruction. This patch makes it more like the
GCC output.
llvm-svn: 86729
input filename so that opt doesn't print the input filename in the
output so that grep lines in the tests don't unintentionally match
strings in the input filename.
llvm-svn: 81537
for a single "m" constraint; this is wrong because the
opcode of a load or store would have to change in parallel.
This patch makes it always compute addresses into a register,
which is correct but not as efficient as possible. 7144566.
llvm-svn: 79292
x86_64-apple-darwin10.
--- Reverse-merging r78895 into '.':
U test/CodeGen/PowerPC/2008-12-12-EH.ll
U lib/Target/DarwinTargetAsmInfo.cpp
--- Reverse-merging r78892 into '.':
U include/llvm/Target/DarwinTargetAsmInfo.h
U lib/Target/X86/X86TargetAsmInfo.cpp
U lib/Target/X86/X86TargetAsmInfo.h
U lib/Target/ARM/ARMTargetAsmInfo.h
U lib/Target/ARM/ARMTargetMachine.cpp
U lib/Target/ARM/ARMTargetAsmInfo.cpp
U lib/Target/PowerPC/PPCTargetAsmInfo.cpp
U lib/Target/PowerPC/PPCTargetAsmInfo.h
U lib/Target/PowerPC/PPCTargetMachine.cpp
G lib/Target/DarwinTargetAsmInfo.cpp
llvm-svn: 78919
instead of syntactically as a string. This means that it keeps track of the
segment, section, flags, etc directly and asmprints them in the right format.
This also includes parsing and validation support for llvm-mc and
"attribute(section)", so we should now start getting errors about invalid
section attributes from the compiler instead of the assembler on darwin.
Still todo:
1) Uniquing of darwin mcsections
2) Move all the Darwin stuff out to MCSectionMachO.[cpp|h]
3) there are a few FIXMEs, for example what is the syntax to get the
S_GB_ZEROFILL segment type?
llvm-svn: 78547
The inline asm operands must be parsed from the first flag, you cannot assume
that an immediate operand preceeding a register use operand is the flag.
PowerPC "m" operands are represented as (flag, imm, reg) triples.
isRegTiedToDefOperand() would incorrectly interpret the imm as the flag.
llvm-svn: 76101
additional bug fixes:
1. The bug that everyone hit was a problem in the asmprinter where it
would remove $stub but keep the L prefix on a name when emitting the
indirect symbol. This is easy to fix by keeping the name of the stub
and the name of the symbol in a StringMap instead of just keeping a
StringSet and trying to reconstruct it late.
2. There was a problem printing the personality function. The current
logic to print out the personality function from the DWARF information
is a bit of a cesspool right now that duplicates a bunch of other
logic in the asm printer. The short version of it is that it depends
on emitting both the L and _ prefix for symbols (at least on darwin)
and until I can untangle it, it is best to switch the mangler back to
emitting both prefixes.
llvm-svn: 75646
indicates whether the label is private or not, instead of taking
prefix stuff. One effect of this is that symbols will be generated
with *just* the private prefix, instead of both the private prefix
*and* the user-label-prefix, but this doesn't matter as long as it
is consistent. For example we'll now get "Lfoo" instead of "L_foo".
These are just assembler temporary labels anyway, so they never even
make it into the .o file.
llvm-svn: 75607
support for x86, and UMULO/SMULO for many architectures, including PPC
(PR4201), ARM, and Cell. The resulting expansion isn't perfect, but it's
not bad.
llvm-svn: 73477
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.
For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.
This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt
llvm-svn: 72897
When a test fails with more than a pipeful of output on stdout AND stderr, one
of the DejaGnu programs blocks. The problem can be avoided by redirecting
stdout to a file.
llvm-svn: 71919
Massive check in. This changes the "-fast" flag to "-O#" in llc. If you want to
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'll change the JIT with a follow-up patch.
llvm-svn: 70343
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'm not 100% sure if it's necessary to change it there...
llvm-svn: 70270
type as the vector element type: allow them to be of
a wider integer type than the element type all the way
through the system, and not just as far as LegalizeDAG.
This should be safe because it used to be this way
(the old type legalizer would produce such nodes), so
backends should be able to handle it. In fact only
targets which have legal vector types with an illegal
promoted element type will ever see this (eg: <4 x i16>
on ppc). This fixes a regression with the new type
legalizer (vec_splat.ll). Also, treat SCALAR_TO_VECTOR
the same as BUILD_VECTOR. After all, it is just a
special case of BUILD_VECTOR.
llvm-svn: 69467
172 %ECX<def> = MOV32rr %reg1039<kill>
180 INLINEASM <es:subl $5,$1
sbbl $3,$0>, 10, %EAX<def>, 14, %ECX<earlyclobber,def>, 9, %EAX<kill>,
36, <fi#0>, 1, %reg0, 0, 9, %ECX<kill>, 36, <fi#1>, 1, %reg0, 0
188 %EAX<def> = MOV32rr %EAX<kill>
196 %ECX<def> = MOV32rr %ECX<kill>
204 %ECX<def> = MOV32rr %ECX<kill>
212 %EAX<def> = MOV32rr %EAX<kill>
220 %EAX<def> = MOV32rr %EAX
228 %reg1039<def> = MOV32rr %ECX<kill>
The early clobber operand ties ECX input to the ECX def.
The live interval of ECX is represented as this:
%reg20,inf = [46,47:1)[174,230:0) 0@174-(230) 1@46-(47)
The right way to represent this is something like
%reg20,inf = [46,47:2)[174,182:1)[181:230:0) 0@174-(182) 1@181-230 @2@46-(47)
Of course that won't work since that means overlapping live ranges defined by two val#.
The workaround for now is to add a bit to val# which says the val# is redefined by a early clobber def somewhere. This prevents the move at 228 from being optimized away by SimpleRegisterCoalescing::AdjustCopiesBackFrom.
llvm-svn: 61259
The EH_frame and .eh symbols are now private, except for darwin9 and earlier.
The patch also fixes the definition of PrivateGlobalPrefix on pcc linux.
llvm-svn: 61242
1. ppcf128 select is expanded to f64 select's.
2. f64 select operand 0 is an i1 truncate, it's promoted to i32 zero_extend.
3. f64 select is updated. It's changed back to a "NewNode" and being re-analyzed.
4. f64 select operands are being processed. Operand 0 is a "NewNode". It's being expunged out of ReplacedValues map.
5. ExpungeNode tries to remap f64 select and notice it's a "NewNode" and assert.
Duncan, please take a look. Thanks.
llvm-svn: 60443
is noticeably worse than previous PPC-specific code.
Since the latter was also wrong in some cases and
correctness is more important than efficiency, I'm
disabling this test temporarily while I fix it.
llvm-svn: 58876
ppcf128 to i32 conversion and expand it into a code
sequence like in LegalizeDAG. This needs custom
ppc lowering of FP_ROUND_INREG, so turn that on and
make it work with LegalizeTypes. Probably PPC should
simply custom lower the original conversion.
llvm-svn: 58329
the previous patch this one actually passes make check.
"Fix PR2356 on PowerPC: if we have an input and output that are tied together
that have different sizes (e.g. i32 and i64) make sure to reserve registers for
the bigger operand."
llvm-svn: 57771
vr2 = OR vr0, vr1
=>
vr2 = OR vr1, vr1 // after coalescing vr0 with vr1
Update the value# of the destination register with the copy instruction if that happens.
llvm-svn: 56165
replacement of multiple values. This is slightly more efficient
than doing multiple ReplaceAllUsesOfValueWith calls, and theoretically
could be optimized even further. However, an important property of this
new function is that it handles the case where the source value set and
destination value set overlap. This makes it feasible for isel to use
SelectNodeTo in many very common cases, which is advantageous because
SelectNodeTo avoids a temporary node and it doesn't require CSEMap
updates for users of values that don't change position.
Revamp MorphNodeTo, which is what does all the work of SelectNodeTo, to
handle operand lists more efficiently, and to correctly handle a number
of corner cases to which its new wider use exposes it.
This commit also includes a change to the encoding of post-isel opcodes
in SDNodes; now instead of being sandwiched between the target-independent
pre-isel opcodes and the target-dependent pre-isel opcodes, post-isel
opcodes are now represented as negative values. This makes it possible
to test if an opcode is pre-isel or post-isel without having to know
the size of the current target's post-isel instruction set.
These changes speed up llc overall by 3% and reduce memory usage by 10%
on the InstructionCombining.cpp testcase with -fast and -regalloc=local.
llvm-svn: 53728
simply does the atomic.cmp.swap on the larger type,
which means it blows away whatever is sitting in
the bytes just after the memory location, i.e.
causes a buffer overflow. This really requires
target specific code, which is why LegalizeTypes
doesn't try to handle this case generically. The
existing (wrong) code in LegalizeDAG will go away
automatically once the type legalization code is
removed from LegalizeDAG so I'm leaving it there
for the moment. Meanwhile, don't test for this
feature.
llvm-svn: 53669
In LegalizeDAG the value is zero-extended to
the new type before byte swapping. It doesn't
matter how the extension is done since the new
bits are shifted off anyway after the swap, so
extend by any old rubbish bits. This results
in the final assembler for the testcase being
one line shorter.
llvm-svn: 53604
getTargetNode and SelectNodeTo to reduce duplication, and to
make some of the getTargetNode code available to SelectNodeTo.
Use SelectNodeTo instead of getTargetNode in several new
interesting cases, as it mutates nodes in place instead of
creating new ones.
This triggers some scheduling behavior differences due to nodes
being presented to the scheduler in a different order. Some of the
arbitrary scheduling decisions it makes are now arbitrarily made
differently. This is visible in CodeGen/PowerPC/LargeAbsoluteAddr.ll,
where a trivial scheduling difference led to a trivial register
allocation difference.
llvm-svn: 53203
Added abstract class MemSDNode for any Node that have an associated MemOperand
Changed atomic.lcs => atomic.cmp.swap, atomic.las => atomic.load.add, and
atomic.lss => atomic.load.sub
llvm-svn: 52706
,------.
| |
| v
| t2 = phi ... t1 ...
| |
| v
| t1 = ...
| ... = ... t1 ...
| |
`------'
where there is a use in a PHI node that's a predecessor to the defining
block. We don't want to mark all predecessors as having the value "alive" in
this case. Also, the assert was too restrictive and didn't handle this case.
llvm-svn: 52655
Move platform independent code (lowering of possibly overwritten
arguments, check for tail call optimization eligibility) from
target X86ISelectionLowering.cpp to TargetLowering.h and
SelectionDAGISel.cpp.
Initial PowerPC tail call implementation:
Support ppc32 implemented and tested (passes my tests and
test-suite llvm-test).
Support ppc64 implemented and half tested (passes my tests).
On ppc tail call optimization is performed if
caller and callee are fastcc
call is a tail call (in tail call position, call followed by ret)
no variable argument lists or byval arguments
option -tailcallopt is enabled
Supported:
* non pic tail calls on linux/darwin
* module-local tail calls on linux(PIC/GOT)/darwin(PIC)
* inter-module tail calls on darwin(PIC)
If constraints are not met a normal call will be emitted.
A test checking the argument lowering behaviour on x86-64 was added.
llvm-svn: 50477
When choosing between constraints with multiple options,
like "ir", test to see if we can use the 'i' constraint and
go with that if possible. This produces more optimal ASM in
all cases (sparing a register and an instruction to load it),
and fixes inline asm like this:
void test () {
asm volatile (" %c0 %1 " : : "imr" (42), "imr"(14));
}
Previously we would dump "42" into a memory location (which
is ok for the 'm' constraint) which would cause a problem
because the 'c' modifier is not valid on memory operands.
Isn't it great how inline asm turns 'missed optimization'
into 'compile failed'??
Incidentally, this was the todo in
PowerPC/2007-04-24-InlineAsm-I-Modifier.ll
Please do NOT pull this into Tak.
llvm-svn: 50315
Chris Lattner