The meaning of getTypeSize was not clear - clarifying it is important
now that we have x86 long double and arbitrary precision integers.
The issue with long double is that it requires 80 bits, and this is
not a multiple of its alignment. This gives a primitive type for
which getTypeSize differed from getABITypeSize. For arbitrary precision
integers it is even worse: there is the minimum number of bits needed to
hold the type (eg: 36 for an i36), the maximum number of bits that will
be overwriten when storing the type (40 bits for i36) and the ABI size
(i.e. the storage size rounded up to a multiple of the alignment; 64 bits
for i36).
This patch removes getTypeSize (not really - it is still there but
deprecated to allow for a gradual transition). Instead there is:
(1) getTypeSizeInBits - a number of bits that suffices to hold all
values of the type. For a primitive type, this is the minimum number
of bits. For an i36 this is 36 bits. For x86 long double it is 80.
This corresponds to gcc's TYPE_PRECISION.
(2) getTypeStoreSizeInBits - the maximum number of bits that is
written when storing the type (or read when reading it). For an
i36 this is 40 bits, for an x86 long double it is 80 bits. This
is the size alias analysis is interested in (getTypeStoreSize
returns the number of bytes). There doesn't seem to be anything
corresponding to this in gcc.
(3) getABITypeSizeInBits - this is getTypeStoreSizeInBits rounded
up to a multiple of the alignment. For an i36 this is 64, for an
x86 long double this is 96 or 128 depending on the OS. This is the
spacing between consecutive elements when you form an array out of
this type (getABITypeSize returns the number of bytes). This is
TYPE_SIZE in gcc.
Since successive elements in a SequentialType (arrays, pointers
and vectors) need to be aligned, the spacing between them will be
given by getABITypeSize. This means that the size of an array
is the length times the getABITypeSize. It also means that GEP
computations need to use getABITypeSize when computing offsets.
Furthermore, if an alloca allocates several elements at once then
these too need to be aligned, so the size of the alloca has to be
the number of elements multiplied by getABITypeSize. Logically
speaking this doesn't have to be the case when allocating just
one element, but it is simpler to also use getABITypeSize in this
case. So alloca's and mallocs should use getABITypeSize. Finally,
since gcc's only notion of size is that given by getABITypeSize, if
you want to output assembler etc the same as gcc then getABITypeSize
is the size you want.
Since a store will overwrite no more than getTypeStoreSize bytes,
and a read will read no more than that many bytes, this is the
notion of size appropriate for alias analysis calculations.
In this patch I have corrected all type size uses except some of
those in ScalarReplAggregates, lib/Codegen, lib/Target (the hard
cases). I will get around to auditing these too at some point,
but I could do with some help.
Finally, I made one change which I think wise but others might
consider pointless and suboptimal: in an unpacked struct the
amount of space allocated for a field is now given by the ABI
size rather than getTypeStoreSize. I did this because every
other place that reserves memory for a type (eg: alloca) now
uses getABITypeSize, and I didn't want to make an exception
for unpacked structs, i.e. I did it to make things more uniform.
This only effects structs containing long doubles and arbitrary
precision integers. If someone wants to pack these types more
tightly they can always use a packed struct.
llvm-svn: 43620
This commit fixes two things. One is a pair of VStudio compiler errors stemming from variables
which defined within the for loop statement and also within the body of the for loop. I fixed these
by renaming one of the two variables. Additionally, I've made the Function*->ExFunc map in
ExternalFunctions.cpp a ManagedStatic object, so that cleanup will be done on llvm_shutdown. In repeated
uses of the interpreter, where the same Function* address may get used for completely differnet functions,
this was causing a crash.
llvm-svn: 40558
turn "putchar" calls into _IO_putc calls which is a lower-level interface.
This patch allows these calls to be executed by lli in interpreter mode.
llvm-svn: 37254
incorrect results (canonicalization was dropped several commits ago).
2. Add support for fscanf.
3. Suppress a warning about cast to pointer from non-pointer-sized integer.
llvm-svn: 36482
* Rename the FunctionType* parameter from M to FT on all the functions.
* Implement a fix for PR1293 by just asserting that library functions that
must return pointers should have pointer typed results. This just makes
sure that we don't attempt to use an uninitialized integer or something
later on.
llvm-svn: 35508
handling for integer of various sizes. GenericValue now has just a single
integer field of type APInt. We use its facilities directly in the
execution of all instructions.
llvm-svn: 34951
Target DataLayout incorrectly. For now, we'll trust that the module has
got the correct DataLayout. In the future, this needs to be changed to
tell the TargetData to be "current host".
llvm-svn: 34947
While preparing http://llvm.org/PR1198 I noticed several asserts
protecting unprepared code from i128 types that weren't actually failing
when they should because they were written as assert("foo") instead of
something like assert(0 && "foo"). This patch fixes all the cases that a
quick grep found.
llvm-svn: 34267
This feature is needed in order to support shifts of more than 255 bits
on large integer types. This changes the syntax for llvm assembly to
make shl, ashr and lshr instructions look like a binary operator:
shl i32 %X, 1
instead of
shl i32 %X, i8 1
Additionally, this should help a few passes perform additional optimizations.
llvm-svn: 33776
The Module::setEndianness and Module::setPointerSize methods have been
removed. Instead you can get/set the DataLayout. Adjust thise accordingly.
llvm-svn: 33530
a small inline function to sign extend a uint64_t value based on its
type's bitwidth. This function is then used in both executeSExtInst and
the various executeICMP_S** functions.
llvm-svn: 33403
1. Fix logic for executeGEP. Only 32-bit and 64-bit integer types are
acceptable as indices.
2. Ensure that all integer cast operations truncate their result to the
integer size of the operand.
llvm-svn: 33318
rename Type::getIntegralTypeMask to Type::getIntegerTypeMask.
This makes naming much more consistent. For example, there are now no longer any
instances of IntegerType that are not considered isInteger! :)
llvm-svn: 33225
Implement the arbitrary bit-width integer feature. The feature allows
integers of any bitwidth (up to 64) to be defined instead of just 1, 8,
16, 32, and 64 bit integers.
This change does several things:
1. Introduces a new Derived Type, IntegerType, to represent the number of
bits in an integer. The Type classes SubclassData field is used to
store the number of bits. This allows 2^23 bits in an integer type.
2. Removes the five integer Type::TypeID values for the 1, 8, 16, 32 and
64-bit integers. These are replaced with just IntegerType which is not
a primitive any more.
3. Adjust the rest of LLVM to account for this change.
Note that while this incremental change lays the foundation for arbitrary
bit-width integers, LLVM has not yet been converted to actually deal with
them in any significant way. Most optimization passes, for example, will
still only deal with the byte-width integer types. Future increments
will rectify this situation.
llvm-svn: 33113
This patch removes the SetCC instructions and replaces them with the ICmp
and FCmp instructions. The SetCondInst instruction has been removed and
been replaced with ICmpInst and FCmpInst.
llvm-svn: 32751
The long awaited CAST patch. This introduces 12 new instructions into LLVM
to replace the cast instruction. Corresponding changes throughout LLVM are
provided. This passes llvm-test, llvm/test, and SPEC CPUINT2000 with the
exception of 175.vpr which fails only on a slight floating point output
difference.
llvm-svn: 31931
This patch converts the old SHR instruction into two instructions,
AShr (Arithmetic) and LShr (Logical). The Shr instructions now are not
dependent on the sign of their operands.
llvm-svn: 31542
Make necessary changes to support DIV -> [SUF]Div. This changes llvm to
have three division instructions: signed, unsigned, floating point. The
bytecode and assembler are bacwards compatible, however.
llvm-svn: 31195
This patch implements the first increment for the Signless Types feature.
All changes pertain to removing the ConstantSInt and ConstantUInt classes
in favor of just using ConstantInt.
llvm-svn: 31063
Minor tweaks in public headers and a few .cpp files so that LLVM can build
successfully with -pedantic and projects using LLVM with -pedantic don't
get warnings from LLVM. There's still more -pedantic warnings to fix.
llvm-svn: 28453
therefore the function being called must be a main() returning an int. The
consequences when these assumptions are false are not good, so don't assume
them.
llvm-svn: 26031
since we are dirty, special case __main. This should fix the infinite loop
horrible stuff that happens on linux-alpha when configuring llvm-gcc. It
might also help cygwin, who knows??
llvm-svn: 19729
Move include/Config and include/Support into include/llvm/Config,
include/llvm/ADT and include/llvm/Support. From here on out, all LLVM
public header files must be under include/llvm/.
llvm-svn: 16137
because 1) the first instruction might not be a call site, and
2) CS and SF.Caller were not getting set to point to the new call site
anyway (resulting in a crash on e.g. call %llvm.memset).
llvm-svn: 13122
pair, and look up varargs in the execution stack every time, instead of
just pushing iterators (which can be invalidated during callFunction())
around. (union GenericValue now has a "pair of uints" member, to support
this mechanism.) Fixes Bug 234.
llvm-svn: 11845
because that makes it abort. Also, fix a typo in a comment.
This checkin brought to you by the "It only takes about 30 seconds to run
ENABLE_LLI tests on Shootout on zion, even if they all dump core" fund.
llvm-svn: 10844
interpreting them.
Move support for getting the value of a ConstantExpr into
getConstantExprValue(), and add support for the rest of the different
kinds of ConstantExprs. (I don't think I like ConstantExprs!)
This requires separate procedures executeShlInst() and executeShrInst().
Reduce the number of references to TheEE.
Get rid of an old comment mentioning annotations.
Fix exitCalled(), which was crashing the Interpreter. This was a
leftover from the return-value code refactoring.
llvm-svn: 10389
argument to be returned by va_arg. This allows va_lists to be passed
between different LLVM procedures (though it is unlikely that an LLI
va_list would make sense to an external function, except by chance.)
llvm-svn: 9965
Evan Cheng