Commit 9965b12fd1 was supposed to change the offset constant when
lowering load/stores, but only introduced this change for loads. This
patch adds the same fix for stores.
A known limitation for Future CPU is that the new prefixed instructions may
not cross 64 Byte boundaries.
All instructions are already 4 byte aligned so the only situation where this
can occur is when the prefix is in one 64 byte block and the instruction that
is prefixed is at the top of the next 64 byte block. To fix this case
PPCELFStreamer was added to intercept EmitInstruction. When a prefixed
instruction is emitted we try to align it to 64 Bytes by adding a maximum of
4 bytes. If the prefixed instruction crosses the 64 Byte boundary then the
alignment would trigger and a 4 byte nop would be added to push the
instruction into the next 64 byte block.
Differential Revision: https://reviews.llvm.org/D72570
This gets selected to the appropriate fcvt instruction. Handling from there on
isn't fully correct yet, as we need to model fcvt reading and writing to fpsr
and fpcr.
Differential Revision: https://reviews.llvm.org/D73201
This commit adds AVR support to lldb. With this change, it can load a
binary and do basic things like dump a line table.
Not much else has been implemented, that should be done in later
changes.
Differential Revision: https://reviews.llvm.org/D73539
Summary:
This patch implements https://wg21.link/P0325.
Please mind that at it is my first contribution to libc++, so I may have forgotten to abide to some conventions.
Reviewers: EricWF, mclow.lists, ldionne, lichray
Reviewed By: ldionne, lichray
Subscribers: lichray, dexonsmith, zoecarver, christof, ldionne, libcxx-commits
Tags: #libc
Differential Revision: https://reviews.llvm.org/D69882
We are missing ability to override the sh_entsize field for
SHT_REL[A] sections. It would be useful for writing test cases.
Differential revision: https://reviews.llvm.org/D73621
Summary:
The 'gpu.terminator' operation is used as the terminator for the
regions of gpu.launch. This is to disambugaute them from the
return operation on 'gpu.func' functions.
This is a breaking change and users of the gpu dialect will need
to adapt their code when producting 'gpu.launch' operations.
Reviewers: nicolasvasilache
Subscribers: mehdi_amini, rriddle, jpienaar, burmako, shauheen, antiagainst, csigg, arpith-jacob, mgester, lucyrfox, liufengdb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73620
DynRegionInfo is a helper class used to create memory ranges.
It is used for many things and can report errors.
Errors reported currently do not provide a good diagnostic.
This patch fixes it and adds a test for each possible case.
Differential revision: https://reviews.llvm.org/D73484
Similar to previous commits, this just replaces the lookup in the
global map with the reference to the TypeSystemClang instance we already
have in this context.
The current implementation stops dumping in case of a single error
it handles, though we can continue dumping.
This patch refines it: it adds a few warnings and a few test cases.
Differential revision: https://reviews.llvm.org/D73269
These become STRICT_FCMP and STRICT_FCMPE, which then get selected to the
corresponding FCMP and FCMPE instructions, though the handling from there on
isn't fully correct as we don't model reads and writes to FPCR and FPSR.
Differential Revision: https://reviews.llvm.org/D73368
Summary:
The code was assuming in a few places that if there was only one exit
from the function that it was a normal return, which is invalid. It
could be an infinite loop, in which case we still need to insert the
usual fake edge so that the null export happens. This fixes shaders that
end with an infinite loop that discards.
Reviewers: arsenm, nhaehnle, critson
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71192
Summary:
Add trimming of unused components of s_buffer_load.
For s_buffer_load and unformatted buffer_load also trim unused
components at the beginning of vector and update offset accordingly.
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71785
The function a) returned 32-bits when in DWARF64, the PrologueLength
field is 64-bits in size, and b) didn't work for DWARF version 5.
Also deleted some related dead code. With this deletion, getLength is
itself dead, but another change is about to make use of it.
Reviewed by: probinson
Differential Revision: https://reviews.llvm.org/D73626
Summary:
In a release build this variable becomes unused and may break the build
with `-Werror,-Wunused-variable`.
Reviewers: gribozavr2, jdoerfert, sstefan1
Reviewed By: gribozavr2
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73683
Summary:
As determined with `llvm-exegesis`.
Some of these look like typos/misunderstandings of the sched model td
spec:
- latency defaults to `1` when not set => Maybe we can avoid
having a default ?
- problems with regexps not being anchored by default (XCHG matching
CMPXHG)
Note that this is not complete, it fixes only the most obvious mistakes,
and only for latency (not uops).
Reviewers: RKSimon, GGanesh
Subscribers: hiraditya, jfb, mstojanovic, hfinkel, craig.topper, andreadb, lebedev.ri, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73172
InstCombine operates on the basic premise that the operands of the
currently processed instruction have already been simplified. It
achieves this by pushing instructions to the worklist in reverse
program order, so that instructions are popped off in program order.
The worklist management in the main combining loop also makes sure
to uphold this invariant.
However, the same is not true for all the code that is performing
manual worklist management. The largest problem (addressed in this
patch) are instructions inserted by InstCombine's IRBuilder. These
will be pushed onto the worklist in order of insertion (generally
matching program order), which means that a) the users of the
original instruction will be visited first, as they are pushed later
in the main loop and b) the newly inserted instructions will be
visited in reverse program order.
This causes a number of problems: First, folds operate on instructions
that have not had their operands simplified, which may result in
optimizations being missed (ran into this in
https://reviews.llvm.org/D72048#1800424, which was the original
motivation for this patch). Additionally, this increases the amount
of folds InstCombine has to perform, both within one iteration, and
by increasing the number of total iterations.
This patch addresses the issue by adding a Worklist.AddDeferred()
method, which is used for instructions inserted by IRBuilder. These
will only be added to the real worklist after the combine finished,
and in reverse order, so they will end up processed in program order.
I should note that the same should also be done to nearly all other
uses of Worklist.Add(), but I'm starting with just this occurrence,
which has by far the largest test fallout.
Most of the test changes are due to
https://bugs.llvm.org/show_bug.cgi?id=44521 or other cases where
we don't canonicalize something. These are neutral. One regression
has been addressed in D73575 and D73647. The remaining regression
in an shl+sdiv fold can't really be fixed without dropping another
transform, but does not seem particularly problematic in the first
place.
Differential Revision: https://reviews.llvm.org/D73411
This lowering tries to look for G_PTR_ADD instructions and then converts
them to a standard G_ADD with a COPY on the source, and G_INTTOPTR on the
result. This is ok for address space 0 on AArch64 as p0 can be treated as
s64.
The motivation behind this is to expose the add semantics to the imported
tablegen patterns. We shouldn't need to check for uses being loads/stores,
because the selector works bottom up, uses before defs. By the time we
end up trying to select a G_PTR_ADD, we should have already attempted to
fold this into addressing modes and were therefore unsuccessful.
This gives some performance and code size improvements across the board.
Differential Revision: https://reviews.llvm.org/D73673
Summary:
FreeBSD got `timespec_get` support somewhere in the 12.x timeframe, but
the C++ version check in its system headers was written incorrectly.
This has now been fixed for both FreeBSD 13 and 12.
Add checks for the corresponding `__FreeBSD_version` values, to define
`_LIBCPP_HAS_TIMESPEC_GET` when the function is supported.
Reviewers: emaste, EricWF, ldionne, mclow.lists
Reviewed By: ldionne
Subscribers: arichardson, krytarowski, christof, dexonsmith, libcxx-commits
Tags: #libc
Differential Revision: https://reviews.llvm.org/D71522
Currently some prefixes are emitted as instructions, to distinguish them
from real instruction, fuction isPrefix() is added. The kinds of prefix
are consistent with X86GenInstrInfo.inc.
Differential Revision: https://reviews.llvm.org/D73013
Summary:
This patch makes sure that the field VFShape.VF is greater than zero
when demangling the vector function name of scalable vector functions
encoded in the "vector-function-abi-variant" attribute.
This change is required to be able to provide instances of VFShape
that can be used to query the VFDatabase for the vectorization passes,
as such passes always require a positive value for the Vectorization Factor (VF)
needed by the vectorization process.
It is not possible to extract the value of VFShape.VF from the mangled
name of scalable vector functions, because it is encoded as
`x`. Therefore, the VFABI demangling function has been modified to
extract such information from the IR declaration of the vector
function, under the assumption that _all_ vectors in the signature of
the vector function have the same number of lanes. Such assumption is
valid because it is also assumed by the Vector Function ABI
specifications supported by the demangling function (x86, AArch64, and
LLVM internal one).
The unit tests that demangle scalable names have been modified by
adding the IR module that carries the declaration of the vector
function name being demangled.
In particular, the demangling function fails in the following cases:
1. When the declaration of the scalable vector function is not
present in the module.
2. When the value of VFSHape.VF is not greater than 0.
Reviewers: jdoerfert, sdesmalen, andwar
Reviewed By: jdoerfert
Subscribers: mgorny, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73286
Use the std::string conversion operator introduced in
d7049213d0. The SmallString in the log
statement doesn't require conversion at all when using the variadic log
macro.
This is an alternate fix for the issue D73606 was trying to
solve.
The main issue here is that we bailed out of
foldOffsetIntoAddress if Offset is 0. But if we just found a
symbolic displacement and AM.Disp became non-zero
earlier, we still need to validate that AM.Disp with the symbolic
displacement.
This passes fold-add-pcrel.ll.
Differential Revision: https://reviews.llvm.org/D73608
Dominik Montada