We already have good codegen for (vXiY *ext(vXi1 bitcast(iX))) cases, this patch uses it for loads of vXi1 types as well - changing the load into a iX integer load, and bitcasting so that combineToExtendBoolVectorInReg can then use it.
Differential Revision: https://reviews.llvm.org/D62449
llvm-svn: 362081
For the Local Dynamic case of TLSDESC, _TLS_MODULE_BASE_ is defined as a
special TLS symbol that makes:
1) Without relaxation: it produces a dynamic TLSDESC relocation that
computes 0. Adding @dtpoff to access a TLS symbol.
2) With LD->LE relaxation: _TLS_MODULE_BASE_@tpoff = 0 (lowest address in
the TLS block). Adding @tpoff to access a TLS symbol.
For 1), this saves dynamic relocations and GOT slots as otherwise
(General Dynamic) we would create an R_X86_64_TLSDESC and reserve two
GOT slots for each symbol.
Add ElfSym::TlsModuleBase and change the signature of getTlsTpOffset()
to special case _TLS_MODULE_BASE_.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62577
llvm-svn: 362078
Summary:
The ParseTypeFromDWARF function consists of a huge switch on the kind of
type being parsed. Each case in this switch starts with parsing the
attributes of the current DIE. A lot of these attributes are specific to
one kind of a type, but a lot of them are common too, leading to code
duplication.
This patch reduces the duplication (and the size of ParseTypeFromDWARF)
by moving the attribute parsing to a separate function. It creates a
struct (ParsedTypeAttributes), which contains a parsed form of all
attributes which are useful for parsing any kind of a type. The parsing
code for a specific type kind can then access the fields which are
relevant for that specific case.
Reviewers: JDevlieghere, clayborg, aprantl
Subscribers: jdoerfert, lldb-commits
Differential Revision: https://reviews.llvm.org/D62477
llvm-svn: 362075
There's no reason for anyone to modify a list from outside of a symbol
file (as that would break a lot of invariants that symbol files depend
on).
Make the function return a const FileSpecList and fix up a couple of
places that were needlessly binding non-const references to the result
of this function.
llvm-svn: 362069
MVE architecturally specifies a 'beat' system in which a vector
instruction executed now will complete its actual operation over the
next four cycles, so it can overlap with the execution of the previous
and next MVE instruction.
This makes it generally an advantage to avoid moving values back and
forth between MVE registers and anywhere else, if there's any sensible
way to do the same processing in whatever register type the values
already occupied.
That's just what the 'execution domain' system is supposed to achieve.
So here we add a new execution domain which will contain all the MVE
vector instructions when they are added.
Patch by: Simon Tatham
Differential Revision: https://reviews.llvm.org/D60703
llvm-svn: 362068
When parsing goto labels, Names and Exprs are expanded but Constraints
is not, this may cause a out-of-bounds read later in:
// GCCAsmStmt::GCCAsmStmt
// `constraints` has only `NumExprs - NumLabels` elements
Constraints = new (C) StringLiteral*[NumExprs];
std::copy(constraints, constraints + NumExprs, Constraints);
llvm-svn: 362067
If an assembly instruction has to mention an input operand name twice,
for example the MVE VMOV instruction that accesses two lanes of the
same vector by writing 'vmov r1, r2, q0[3], q0[1]', then the obvious
way to write its AsmString is to include the same operand (here $Qd)
twice. But this causes the AsmMatcher generator to omit that
instruction completely from the match table, on the basis that the
generator isn't clever enough to deal with the duplication.
But you need to have _some_ way of dealing with an instruction like
this - and in this case, where the mnemonic is shared with many other
instructions that the AsmMatcher does handle, it would be very painful
to take it out of the AsmMatcher system completely.
A nicer way is to add a custom AsmMatchConverter routine, and let that
deal with the problem if the autogenerated converter can't. But that
doesn't work, because TableGen leaves the instruction out of its table
_even_ if you provide a custom converter.
Solution: this change, which makes TableGen relax the restriction on
duplicated operands in the case where there's a custom converter.
Patch by: Simon Tatham
Differential Revision: https://reviews.llvm.org/D60695
llvm-svn: 362066
This is a new special identifier which you can use as a default in
OperandWithDefaultOps. The idea is that you use it for an input
operand of an instruction that's tied to an output operand, and its
semantics are that (in the default case) the input operand's value is
not used at all.
The detailed effect is that when instruction selection emits the
instruction in the form of a pre-regalloc MachineInstr, it creates an
IMPLICIT_DEF node to use as that input.
If you're creating an MCInst with explicit register names, then the
right handling would be to set the input operand to the same register
as the output one (honouring the tie) and to add the 'undef' flag
indicating that that register is deemed to acquire a new don't-care
definition just before we read it. But I haven't done that in this
commit, because there was no need to - no Tablegen backend seems to
autogenerate default fields in an MCInst.
Patch by: Simon Tatham
Differential Revision: https://reviews.llvm.org/D60696
llvm-svn: 362064
These seemed to have been used in the past but were since removed
by the add_compile_flags_if_supported functions that combine these
these checks and adding the flag, but the original checks were never
removed.
Differential Revision: https://reviews.llvm.org/D62566
llvm-svn: 362058
Currently, only the following information is provided by LoopVectorizer
in the case when the CF of the loop is not legal for vectorization:
LV: Can't vectorize the instructions or CFG
LV: Not vectorizing: Cannot prove legality.
But this information is not enough for the root cause analysis; what is
exactly wrong with the loop should also be printed:
LV: Not vectorizing: The exiting block is not the loop latch.
Patch by Pavel Samolysov.
Reviewers: mkuper, hsaito, rengolin, fhahn
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D62311
llvm-svn: 362056
This fixes the issue introduced by r362048 where we always use
pragma comment(lib, ...) for dependent libraries when the compiler
is Clang, but older Clang versions don't support this pragma so
we need to check first if it's supported before using it.
llvm-svn: 362055
Swift requires certain classes to be not just initialized lazily on first
use, but actually allocated lazily using information that is only available
at runtime. This is incompatible with ObjC class initialization, or at least
not efficiently compatible, because there is no meaningful class symbol
that can be put in a class-ref variable at load time. This leaves ObjC
code unable to access such classes, which is undesirable.
objc_class_stub says that class references should be resolved by calling
a new ObjC runtime function with a pointer to a new "class stub" structure.
Non-ObjC compilers (like Swift) can simply emit this structure when ObjC
interop is required for a class that cannot be statically allocated,
then apply this attribute to the `@interface` in the generated ObjC header
for the class.
This attribute can be thought of as a generalization of the existing
`objc_runtime_visible` attribute which permits more efficient class
resolution as well as supporting the additon of categories to the class.
Subclassing these classes from ObjC is currently not allowed.
Patch by Slava Pestov!
llvm-svn: 362054
Modern ELF platforms use -fuse-init-array to emit .init_array instead of
.ctors . ld.bfd and gold --ctors-in-init-array merge .init_array and
.ctors into .init_array but lld doesn't do that.
If crtbegin*.o crtend*.o don't provide .ctors/.dtors, such .ctors in
user object files can lead to crash (see PR42002. The first and the last
elements in .ctors/.dtors are ignored - they are traditionally provided
by crtbegin*.o crtend*.o).
Call addClangTargetOptions() to ensure -fuse-init-array is rendered on
modern ELF platforms. On Hexagon, this renders -target-feature
+reserved-r19 for -ffixed-r19.
Reviewed By: compnerd
Differential Revision: https://reviews.llvm.org/D62509
llvm-svn: 362052
The musl libc only supports Secure PLT.
Patch by A. Wilcox!
Reviewed By: jhibbits
Differential Revision: https://reviews.llvm.org/D59185
llvm-svn: 362051
This matches gcc -static-pie. The intention is to prevent dynamic
relocations in read-only segments.
In ld.bfd and gold, -z notext is the default. If text relocations are needed:
* -z notext: allow and emit DF_TEXTREL.
DF_TEXTREL is not emitted if there is no text relocation.
* -z text: error
In lld, -z text is the default (this change is a no-op).
* -z text: error on text relocations
* -z notext: allow text relocations, and emit DF_TEXTREL no matter whether
text relocations exist.
Reviewed By: sivachandra
Differential Revision: https://reviews.llvm.org/D62606
llvm-svn: 362050
The function Extract() is almost a duplicate of FastExtract() but is not used.
Delete it and rename FastExtract() to Extract().
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D62593
llvm-svn: 362049
As of r360984, LLD supports dependent libraries feature for ELF.
libunwind, libc++abi and libc++ have library dependencies: libdl librt
and libpthread, which means that when libunwind and libc++ are being
statically linked (using -static-libstdc++ flag), user has to manually
specify -ldl -lpthread which is onerous.
This change includes the lib pragma to specify the library dependencies
directly in the source that uses those libraries. This doesn't make any
difference when using linkers that don't support dependent libraries.
However, when using LLD that has dependent libraries feature, users no
longer have to manually specifying library dependencies when using
static linking, linker will pick the library automatically.
Differential Revision: https://reviews.llvm.org/D62090
llvm-svn: 362048
This avoids using llvm-config for inferring various paths within the
runtimes build. We also set LLVM_INCLUDE_DIR variable that's used by
these builds and move assignment of LLVM_BINARY_DIR and LLVM_LIBRARY_DIR
to the same location for consistency.
Differential Revision: https://reviews.llvm.org/D62637
llvm-svn: 362047
Syntax:
asm [volatile] goto ( AssemblerTemplate
:
: InputOperands
: Clobbers
: GotoLabels)
https://gcc.gnu.org/onlinedocs/gcc/Extended-Asm.html
New llvm IR is "callbr" for inline asm goto instead "call" for inline asm
For:
asm goto("testl %0, %0; jne %l1;" :: "r"(cond)::label_true, loop);
IR:
callbr void asm sideeffect "testl $0, $0; jne ${1:l};", "r,X,X,~{dirflag},~{fpsr},~{flags}"(i32 %0, i8* blockaddress(@foo, %label_true), i8* blockaddress(@foo, %loop)) #1
to label %asm.fallthrough [label %label_true, label %loop], !srcloc !3
asm.fallthrough:
Compiler need to generate:
1> a dummy constarint 'X' for each label.
2> an unique fallthrough label for each asm goto stmt " asm.fallthrough%number".
Diagnostic
1> duplicate asm operand name are used in output, input and label.
2> goto out of scope.
llvm-svn: 362045
Summary:
It is better to print an error message instead of silently ignoring unsupported options.
As mentioned in https://reviews.llvm.org/D57045, this is not the best solution and we should print which flag is not supported at some time.
Reviewers: alexshap, rupprecht, jhenderson, jakehehrlich
Reviewed By: alexshap, rupprecht, jakehehrlich
Subscribers: jakehehrlich, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62578
llvm-svn: 362040
Summary:
Add static data members to IR debug info's list of global variables
so that they are emitted as S_CONSTANT records.
Related to https://bugs.llvm.org/show_bug.cgi?id=41615.
Reviewers: rnk
Subscribers: aprantl, cfe-commits, llvm-commits, thakis
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D62167
llvm-svn: 362038
This ports and improves on some existing llvm-readobj -codeview dumping
functionality that llvm-pdbutil lacked.
Helpful for comparing inline line tables between MSVC and clang.
llvm-svn: 362037
clang was encoding pointers to typedefs as if they were pointers to
structs because that is apparently what gcc is doing.
For example:
```
@class Class1;
typedef NSArray<Class1 *> MyArray;
void foo1(void) {
const char *s0 = @encode(MyArray *); // "^{NSArray=#}"
const char *s1 = @encode(NSArray<Class1 *> *); // "@"
}
```
This commit removes the code that was there to make clang compatible
with gcc and make clang emit the correct encoding for ObjC pointers,
which is "@".
rdar://problem/50563529
Differential Revision: https://reviews.llvm.org/D61974
llvm-svn: 362034
Simon Pilgrim