pointer. Its purpose in life is to be a glorified void*, but which does not
implicitly convert to void* or other OpaquePtr's with a different UID.
Introduce Action::DeclPtrTy which is a typedef for OpaquePtr<0>. Change the
entire parser/sema interface to use DeclPtrTy instead of DeclTy*. This
makes the C++ compiler enforce that these aren't convertible to other opaque
types.
We should also convert ExprTy, StmtTy, TypeTy, AttrTy, BaseTy, etc,
but I don't plan to do that in the short term.
The one outstanding known problem with this patch is that we lose the
bitmangling optimization where ActionResult<DeclPtrTy> doesn't know how to
bitmangle the success bit into the low bit of DeclPtrTy. I will rectify
this with a subsequent patch.
llvm-svn: 67952
LHS type and the computation result type; this encodes information into
the AST which is otherwise non-obvious. Fix Sema to always come up with the
right answer for both of these types. Fix IRGen and the analyzer to
account for these changes. This fixes PR2601. The approach is inspired
by PR2601 comment 2.
Note that this changes real *= complex in CodeGen from a silent
miscompilation to an explicit error.
I'm not really sure that the analyzer changes are correct, or how to
test them... someone more familiar with the analyzer should check those
changes.
llvm-svn: 67889
uniqued representation that should both save some memory and make it
far easier to properly build canonical types for types involving
dependent nested-name-specifiers, e.g., "typename T::Nested::type".
This approach will greatly simplify the representation of
CXXScopeSpec. That'll be next.
llvm-svn: 67799
Treat @package the same as @public. The documentation for @package says it is analogous to private_extern for variables/functions. Fully implementing this requires some kind of linker support (so access is denied to code outside the classes executable image). I don't believe GCC fully implements this semantic. Will discuss with Fariborz offline.
llvm-svn: 67755
incompatibilities in assignments from other pointer incompatibilities.
Based off of the patch in PR3342. (This doesn't implement -Wno-pointer-sign,
but I don't know the driver code very well.)
llvm-svn: 67494
isObjCObjectPointerType to work with qualified types. Adjust test for
changes.
If the SemaExpr changes are wrong or break existing code, feel free to
delete the "ExprTy.addConst();" line and revert my changes to
test/Sema/block-literal.c.
llvm-svn: 67489
dot-syntax expression after earching the list of protocols
in the qualified-id, must keep searching the protocol list
of each of the protocols in the list.
llvm-svn: 67314
dependent qualified-ids such as
Fibonacci<N - 1>::value
where N is a template parameter. These references are "unresolved"
because the name is dependent and, therefore, cannot be resolved to a
declaration node (as we would do for a DeclRefExpr or
QualifiedDeclRefExpr). UnresolvedDeclRefExprs instantiate to
DeclRefExprs, QualifiedDeclRefExprs, etc.
Also, be a bit more careful about keeping only a single set of
specializations for a class template, and instantiating from the
definition of that template rather than a previous declaration. In
general, we need a better solution for this for all TagDecls, because
it's too easy to accidentally look at a declaration that isn't the
definition.
We can now process a simple Fibonacci computation described as a
template metaprogram.
llvm-svn: 67308
QualifiedNameType and QualifiedDeclRefExpr. We now keep track of the
exact nested-name-specifier spelling for a QualifiedDeclRefExpr, and
use that spelling when printing ASTs. This fixes PR3493.
llvm-svn: 67283
qualified name, e.g.,
foo::x
so that we retain the nested-name-specifier as written in the source
code and can reproduce that qualified name when printing the types
back (e.g., in diagnostics). This is PR3493, which won't be complete
until finished the other tasks mentioned near the end of this commit.
The parser's representation of nested-name-specifiers, CXXScopeSpec,
is now a bit fatter, because it needs to contain the scopes that
precede each '::' and keep track of whether the global scoping
operator '::' was at the beginning. For example, we need to keep track
of the leading '::', 'foo', and 'bar' in
::foo::bar::x
The Action's CXXScopeTy * is no longer a DeclContext *. It's now the
opaque version of the new NestedNameSpecifier, which contains a single
component of a nested-name-specifier (either a DeclContext * or a Type
*, bitmangled).
The new sugar type QualifiedNameType composes a sequence of
NestedNameSpecifiers with a representation of the type we're actually
referring to. At present, we only build QualifiedNameType nodes within
Sema::getTypeName. This will be extended to other type-constructing
actions (e.g., ActOnClassTemplateId).
Also on the way: QualifiedDeclRefExprs will also store a sequence of
NestedNameSpecifiers, so that we can print out the property
nested-name-specifier. I expect to also use this for handling
dependent names like Fibonacci<I - 1>::value.
llvm-svn: 67265
Type pointer. This allows our nested-name-specifiers to retain more
information about the actual spelling (e.g., which typedef did the
user name, or what exact template arguments were used in the
template-id?). It will also allow us to have dependent
nested-name-specifiers that don't map to any DeclContext.
llvm-svn: 67140
always, refactored the existing logic to tease apart the parser action
and the semantic analysis shared by the parser and template
instantiation.
llvm-svn: 66987
- C++ function casts, e.g., T(foo)
- sizeof(), alignof()
More importantly, this allows us to verify that we're performing
overload resolution during template instantiation, with
argument-dependent lookup and the "cached" results of name lookup from
the template definition.
llvm-svn: 66947
instantiation for binary operators. This change moves most of the
operator-overloading code from the parser action ActOnBinOp to a new,
parser-independent semantic checking routine CreateOverloadedBinOp.
Of particular importance is the fact that CreateOverloadedBinOp does
*not* perform any name lookup based on the current parsing context (it
doesn't take a Scope*), since it has to be usable during template
instantiation, when there is no scope information. Rather, it takes a
pre-computed set of functions that are visible from the context or via
argument-dependent lookup, and adds to that set any member operators
and built-in operator candidates. The set of functions is computed in
the parser action ActOnBinOp based on the current context (both
operator name lookup and argument-dependent lookup). Within a
template, the set computed by ActOnBinOp is saved within the
type-dependent AST node and is augmented with the results of
argument-dependent name lookup at instantiation time (see
TemplateExprInstantiator::VisitCXXOperatorCallExpr).
Sadly, we can't fully test this yet. I'll follow up with template
instantiation for sizeof so that the real fun can begin.
llvm-svn: 66923
This solution is much simpler (and doesn't add any per-scope overhead, which concerned Chris).
The only downside is the LabelMap is now declared in two places (Sema and BlockSemaInfo). My original fix tried to unify the LabelMap in "Scope" (which would support nested functions in general). In any event, this fixes the bug given the current language definition. If/when we decide to support GCC style nested functions, this will need to be tweaked.
llvm-svn: 66896
C++ templates. In particular, keep track of the overloaded operators
that are visible from the template definition, so that they can be
merged with those operators visible via argument-dependent lookup at
instantiation time.
Refactored the lookup routines for argument-dependent lookup and for
operator name lookup, so they can be called without immediately adding
the results to an overload set.
Instantiation of these expressions is completely wrong. I'll work on
that next.
llvm-svn: 66851
template. More importantly, start to sort out the issues regarding
complete types and nested-name-specifiers, especially the question of:
when do we instantiate a class template specialization that occurs to
the left of a '::' in a nested-name-specifier?
llvm-svn: 66662
A recent regression caused by http://llvm.org/viewvc/llvm-project?rev=65912&view=rev.
This commit isn't fully baked. Nevertheless, it should cause Xcode to compile again. Will speak with Fariborz offline.
llvm-svn: 66045
- Disallow casting 'super'. GCC allows this, however it doesn't make sense (super isn't an expression and the cast won't alter lookup/dispatch).
- Tighten up lookup when messaging 'self'.
llvm-svn: 66033
need them to evaluate redeclarations or call a function that hasn't
already been declared. We now keep a DenseMap of these locally-scoped
declarations so that they are not visible but can be quickly found,
e.g., when we're looking for previous declarations or before we go
ahead and implicitly declare a function that's being called. Fixes
PR3672.
llvm-svn: 65792
- Move the 'LabelMap' from Sema to Scope. To avoid layering problems, the second element is now a 'StmtTy *', which makes the LabelMap a bit more verbose to deal with.
- Add 'ActiveScope' to Sema. Managed by ActOnStartOfFunctionDef(), ObjCActOnStartOfMethodDef(), ActOnBlockStmtExpr().
- Changed ActOnLabelStmt(), ActOnGotoStmt(), ActOnAddrLabel(), and ActOnFinishFunctionBody() to use the new ActiveScope.
- Added FIXME to workaround in ActOnFinishFunctionBody() (for dealing with C++ nested functions).
llvm-svn: 65694
building nested member expressions. This location is used to determine the range
of the entire expression, and the expression itself already has its location
inherited from its Base.
This fixes <rdar://problem/6629829>.
llvm-svn: 65650
normal expression, and change Evaluate and IRGen to evaluate it like a
normal expression. This simplifies the code significantly, and fixes
PR3396.
llvm-svn: 65622
giving them rough classifications (normal types, never-canonical
types, always-dependent types, abstract type representations) and
making it far easier to make sure that we've hit all of the cases when
decoding types.
Switched some switch() statements on the type class over to using this
mechanism, and filtering out those things we don't care about. For
example, CodeGen should never see always-dependent or non-canonical
types, while debug info generation should never see always-dependent
types. More switch() statements on the type class need to be moved
over to using this approach, so that we'll get warnings when we add a
new type then fail to account for it somewhere in the compiler.
As part of this, some types have been renamed:
TypeOfExpr -> TypeOfExprType
FunctionTypeProto -> FunctionProtoType
FunctionTypeNoProto -> FunctionNoProtoType
There shouldn't be any functionality change...
llvm-svn: 65591
know how to recover from an error, we can attach a hint to the
diagnostic that states how to modify the code, which can be one of:
- Insert some new code (a text string) at a particular source
location
- Remove the code within a given range
- Replace the code within a given range with some new code (a text
string)
Right now, we use these hints to annotate diagnostic information. For
example, if one uses the '>>' in a template argument in C++98, as in
this code:
template<int I> class B { };
B<1000 >> 2> *b1;
we'll warn that the behavior will change in C++0x. The fix is to
insert parenthese, so we use code insertion annotations to illustrate
where the parentheses go:
test.cpp:10:10: warning: use of right-shift operator ('>>') in template
argument will require parentheses in C++0x
B<1000 >> 2> *b1;
^
( )
Use of these annotations is partially implemented for HTML
diagnostics, but it's not (yet) producing valid HTML, which may be
related to PR2386, so it has been #if 0'd out.
In this future, we could consider hooking this mechanism up to the
rewriter to actually try to fix these problems during compilation (or,
after a compilation whose only errors have fixes). For now, however, I
suggest that we use these code modification hints whenever we can, so
that we get better diagnostics now and will have better coverage when
we find better ways to use this information.
This also fixes PR3410 by placing the complaint about missing tokens
just after the previous token (rather than at the location of the next
token).
llvm-svn: 65570
only from a function definition (that does not have a prototype) are
only used to determine the compatible with other declarations of that
same function. In particular, when referencing the function we pretend
as if it does not have a prototype. Implement this behavior, which
fixes PR3626.
llvm-svn: 65460
that declaration to global scope so that it can be found from other
scopes. This allows us to diagnose redeclaration errors for external
declarations across scopes. We also warn when name lookup finds such
an out-of-scope declaration. This is part of <rdar://problem/6127293>;
we'll also need to do the same thing for variables.
llvm-svn: 65373
Move two key ObjC typechecks from Sema::CheckPointerTypesForAssignment() to ASTContext::mergeTypes().
This allows us to take advantage of the recursion in ASTContext::mergeTypes(), removing some bogus warnings.
This test case I've added includes an example where we still warn (and GCC doesn't). Need to talk with folks and decide what to do. At this point, the major bogosities should be fixed.
llvm-svn: 65231
(as GCC does), except when we've performed overload resolution and
found an unavailable function: in this case, we actually error.
Merge the checking of unavailable functions with the checking for
deprecated functions. This unifies a bit of code, and makes sure that
we're checking for unavailable functions in the right places. Also,
this check can cause an error. We may, eventually, want an option to
make "unavailable" warnings into errors.
Implement much of the logic needed for C++0x deleted functions, which
are effectively the same as "unavailable" functions (but always cause
an error when referenced). However, we don't have the syntax to
specify deleted functions yet :)
llvm-svn: 64955
to do in this area, since there are other places that reference
FunctionDecls.
Don't allow "overloadable" functions (in C) to be declared without a
prototype.
llvm-svn: 64897
the various PPTokens that are pasted together to make it. In the course
of working on this, I discovered ParseObjCStringLiteral which needs some
work. I'll tackle it next.
llvm-svn: 64892
t.c:4:9: error: invalid type 'short *' to __real operator
__tg_choose (__real__(z), C##f(z), (C)(z), C##l(z)),
^
instead of:
t.c:4:9: error: invalid type 'short *' to __real or __imag operator
__tg_choose (__real__(z), C##f(z), (C)(z), C##l(z)),
^
fixing a fixme. It would be even fancier to get the spelling of the token, but I
don't care *that* much :)
llvm-svn: 64759
DiagnoseUseOfDeprecatedDecl method. This ensures that they
are treated consistently. This gets us 'unavailable' support
on a few new types of decls, and makes sure we consistently
silence deprecated when the caller is also deprecated.
llvm-svn: 64612
about, whether they are builtins or not. Use this to add the
appropriate "format" attribute to NSLog, NSLogv, asprintf, and
vasprintf, and to translate builtin attributes (from Builtins.def)
into actual attributes on the function declaration.
Use the "printf" format attribute on function declarations to
determine whether we should do format string checking, rather than
looking at an ad hoc list of builtins and "known" function names.
Be a bit more careful about when we consider a function a "builtin" in
C++.
llvm-svn: 64561
etc.) when we perform name lookup on them. This ensures that we
produce the correct signature for these functions, which has two
practical impacts:
1) When we're supporting the "implicit function declaration" feature
of C99, these functions will be implicitly declared with the right
signature rather than as a function returning "int" with no
prototype. See PR3541 for the reason why this is important (hint:
GCC always predeclares these functions).
2) If users attempt to redeclare one of these library functions with
an incompatible signature, we produce a hard error.
This patch does a little bit of work to give reasonable error
messages. For example, when we hit case #1 we complain that we're
implicitly declaring this function with a specific signature, and then
we give a note that asks the user to include the appropriate header
(e.g., "please include <stdlib.h> or explicitly declare 'malloc'"). In
case #2, we show the type of the implicit builtin that was incorrectly
declared, so the user can see the problem. We could do better here:
for example, when displaying this latter error message we say
something like:
'strcpy' was implicitly declared here with type 'char *(char *, char
const *)'
but we should really print out a fake code line showing the
declaration, like this:
'strcpy' was implicitly declared here as:
char *strcpy(char *, char const *)
This would also be good for printing built-in candidates with C++
operator overloading.
The set of C library functions supported by this patch includes all
functions from the C99 specification's <stdlib.h> and <string.h> that
(a) are predefined by GCC and (b) have signatures that could cause
codegen issues if they are treated as functions with no prototype
returning and int. Future work could extend this set of functions to
other C library functions that we know about.
llvm-svn: 64504
- rename isObjCIdType/isObjCClassType -> isObjCIdStructType/isObjCClassStructType. The previous name didn't do what you would expect.
- add back isObjCIdType/isObjCClassType to do what you would expect. Not currently used, however many of the isObjCIdStructType/isObjCClassStructType clients could be converted over time.
- move static Sema function areComparableObjCInterfaces to ASTContext (renamed to areComparableObjCPointerTypes, since it now operates on pointer types).
llvm-svn: 64385
This commit adds a new attribute, "overloadable", that enables C++
function overloading in C. The attribute can only be added to function
declarations, e.g.,
int *f(int) __attribute__((overloadable));
If the "overloadable" attribute exists on a function with a given
name, *all* functions with that name (and in that scope) must have the
"overloadable" attribute. Sets of overloaded functions with the
"overloadable" attribute then follow the normal C++ rules for
overloaded functions, e.g., overloads must have different
parameter-type-lists from each other.
When calling an overloaded function in C, we follow the same
overloading rules as C++, with three extensions to the set of standard
conversions:
- A value of a given struct or union type T can be converted to the
type T. This is just the identity conversion. (In C++, this would
go through a copy constructor).
- A value of pointer type T* can be converted to a value of type U*
if T and U are compatible types. This conversion has Conversion
rank (it's considered a pointer conversion in C).
- A value of type T can be converted to a value of type U if T and U
are compatible (and are not both pointer types). This conversion
has Conversion rank (it's considered to be a new kind of
conversion unique to C, a "compatible" conversion).
Known defects (and, therefore, next steps):
1) The standard-conversion handling does not understand conversions
involving _Complex or vector extensions, so it is likely to get
these wrong. We need to add these conversions.
2) All overloadable functions with the same name will have the same
linkage name, which means we'll get a collision in the linker (if
not sooner). We'll need to mangle the names of these functions.
llvm-svn: 64336
- Made allocation of Stmt objects using vanilla new/delete a *compiler
error* by making this new/delete "protected" within class Stmt.
- Now the only way to allocate Stmt objects is by using the new
operator that takes ASTContext& as an argument. This ensures that
all Stmt nodes are allocated from the same (pool) allocator.
- Naturally, these two changes required that *all* creation sites for
AST nodes use new (ASTContext&). This is a large patch, but the
majority of the changes are just this mechanical adjustment.
- The above changes also mean that AST nodes can no longer be
deallocated using 'delete'. Instead, one most do
StmtObject->Destroy(ASTContext&) or do
ASTContextObject.Deallocate(StmtObject) (the latter not running the
'Destroy' method).
Along the way I also...
- Made CompoundStmt allocate its array of Stmt* using the allocator in
ASTContext (previously it used std::vector). There are a whole
bunch of other Stmt classes that need to be similarly changed to
ensure that all memory allocated for ASTs comes from the allocator
in ASTContext.
- Added a new smart pointer ExprOwningPtr to Sema.h. This replaces
the uses of llvm::OwningPtr within Sema, as llvm::OwningPtr used
'delete' to free memory instead of a Stmt's 'Destroy' method.
Big thanks to Doug Gregor for helping with the acrobatics of making
'new/delete' private and the new smart pointer ExprOwningPtr!
llvm-svn: 63997
ASTContext. This required changing all clients to pass in the ASTContext& to the
constructor of StringLiteral. I also changed all allocations of StringLiteral to
use new(ASTContext&).
Along the way, I updated a bunch of new()'s in StmtSerialization.cpp to use the
allocator from ASTContext& (not complete).
llvm-svn: 63958
- Changes Lookup*Name functions to return NamedDecls, instead of
Decls. Unfortunately my recent statement that it will simplify lot of
code, was not quite right, but it simplifies some...
- Makes MergeLookupResult SmallPtrSet instead of vector, following
Douglas suggestions.
- Adds %qN format for printing qualified names to Diagnostic.
- Avoids searching for using-directives in Scopes, which are not
DeclScope, during unqualified name lookup.
llvm-svn: 63739
unqualified-id '('
in C++. The unqualified-id might not refer to any declaration in our
current scope, but declarations by that name might be found via
argument-dependent lookup. We now do so properly.
As part of this change, CXXDependentNameExpr, which was previously
designed to express the unqualified-id in the above constructor within
templates, has become UnresolvedFunctionNameExpr, which does
effectively the same thing but will work for both templates and
non-templates.
Additionally, we cope with all unqualified-ids, since ADL also applies
in cases like
operator+(x, y)
llvm-svn: 63733
a.k.a. Koenig lookup) in C++. Most of the pieces are in place, but for
two:
- In an unqualified call g(x), even if the name does not refer to
anything in the current scope, we can still find functions named
"g" based on ADL. We don't yet have this ability.
- ADL will need updating for friend functions and templates.
llvm-svn: 63692
LookupName et al. Instead, use an enum and a bool to describe its
contents.
Optimized the C/Objective-C path through LookupName, eliminating any
unnecessarily C++isms. Simplify IdentifierResolver::iterator, removing
some code and arguments that are no longer used.
Eliminated LookupDeclInScope/LookupDeclInContext, moving all callers
over to LookupName, LookupQualifiedName, or LookupParsedName, as
appropriate.
All together, I'm seeing a 0.2% speedup on Cocoa.h with PTH and
-disable-free. Plus, we're down to three name-lookup routines.
llvm-svn: 63354
The previous interface was very confusing. This is much more explicit, which will be easier to understand/optimize/convert.
The plan is to eventually deprecate both of these functions. For now, I'm focused on performance.
llvm-svn: 63256
The approach I've taken in this patch is relatively straightforward,
although the code itself is non-trivial. Essentially, as we process
an initializer list we build up a fully-explicit representation of the
initializer list, where each of the subobject initializations occurs
in order. Designators serve to "fill in" subobject initializations in
a non-linear way. The fully-explicit representation makes initializer
lists (both with and without designators) easy to grok for codegen and
later semantic analyses. We keep the syntactic form of the initializer
list linked into the AST for those clients interested in exactly what
the user wrote.
Known limitations:
- Designating a member of a union that isn't the first member may
result in bogus initialization (we warn about this)
- GNU array-range designators are not supported (we warn about this)
llvm-svn: 63242
Even though Sema::LookupDecl() is deprecated, it's still used all over the place. Simplifying the interface will make it easier to understand/optimize/convert.
llvm-svn: 63210
.def file for each library. This means that adding a diagnostic
to sema doesn't require all the other libraries to be rebuilt.
Patch by Anders Johnsen!
llvm-svn: 63111
think this has any significant effects at the moment, but it could
matter if we start constant-folding statement expressions like gcc does.
llvm-svn: 62943
This allows more concise syntax when allocating an object using the ASTContext's allocator.
Convert a few allocations to this operator to for test purposes.
llvm-svn: 62623
When using a BumpPtrAllocator, this reduces malloc overhead from 2.2->1.9% (for Cocoa.h).
At this point, malloc() has dropped the fourth most expensive routine (behind Preprocessor::HandleIdentifier()).
llvm-svn: 62612
that every declaration lives inside a DeclContext.
Moved several things that don't have names but were ScopedDecls (and,
therefore, NamedDecls) to inherit from Decl rather than NamedDecl,
including ObjCImplementationDecl and LinkageSpecDecl. Now, we don't
store empty DeclarationNames for these things, nor do we try to insert
them into DeclContext's lookup structure.
The serialization tests are temporarily disabled. We'll re-enable them
once we've sorted out the remaining ownership/serialiazation issues
between DeclContexts and TranslationUnion, DeclGroups, etc.
llvm-svn: 62562
new DiagnoseIncompleteType. It provides additional information about
struct/class/union/enum types when possible, either by pointing to the
forward declaration of that type or by pointing to the definition (if
we're in the process of defining that type).
Fixes <rdar://problem/6500531>.
llvm-svn: 62521
This change refactors and cleans up our handling of name lookup with
LookupDecl. There are several aspects to this refactoring:
- The criteria for name lookup is now encapsulated into the class
LookupCriteria, which replaces the hideous set of boolean values
that LookupDecl currently has.
- The results of name lookup are returned in a new class
LookupResult, which can lazily build OverloadedFunctionDecls for
overloaded function sets (and, eventually, eliminate the need to
allocate member for OverloadedFunctionDecls) and contains a
placeholder for handling ambiguous name lookup (for C++).
- The primary entry points for name lookup are now LookupName (for
unqualified name lookup) and LookupQualifiedName (for qualified
name lookup). There is also a convenience function
LookupParsedName that handles qualified/unqualified name lookup
when given a scope specifier. Together, these routines are meant
to gradually replace the kludgy LookupDecl, but this won't happen
until after we have base class lookup (which forces us to cope
with ambiguities).
- Documented the heck out of name lookup. Experimenting a little
with using Doxygen's member groups to make some sense of the Sema
class. Feedback welcome!
- Fixes some lingering issues with name lookup for
nested-name-specifiers, which now goes through
LookupName/LookupQualifiedName.
llvm-svn: 62245
Small cleanup in the handling of user-defined conversions.
Also, implement an optimization when constructing a call. We avoid
recomputing implicit conversion sequences and instead use those
conversion sequences that we computed as part of overload resolution.
llvm-svn: 62231
- Use canonical FileID when using getSpelling() caching. This
addresses some cache misses we were seeing with -fsyntax-only on
Cocoa.h
- Added Preprocessor::getPhysicalCharacterAt() utility method for
clients to grab the first character at a specified sourcelocation.
This uses the PTH spelling cache.
- Modified Sema::ActOnNumericConstant() to use
Preprocessor::getPhysicalCharacterAt() instead of
SourceManager::getCharacterData() (to get PTH hits).
These changes cause -fsyntax-only to not page in any sources from
Cocoa.h. We see a speedup of 27%.
llvm-svn: 62193
structures and classes) in C++. Covers name lookup and the synthesis
and member access for the unnamed objects/fields associated with
anonymous unions.
Some C++ semantic checks are still missing (anonymous unions can't
have function members, static data members, etc.), and there is no
support for anonymous structs or unions in C.
llvm-svn: 61840
information for declarations that were referenced via a qualified-id,
e.g., N::C::value. We keep track of the location of the start of the
nested-name-specifier. Note that the difference between
QualifiedDeclRefExpr and DeclRefExpr does have an effect on the
semantics of function calls in two ways:
1) The use of a qualified-id instead of an unqualified-id suppresses
argument-dependent lookup
2) If the name refers to a virtual function, the qualified-id
version will call the function determined statically while the
unqualified-id version will call the function determined dynamically
(by looking up the appropriate function in the vtable).
Neither of these features is implemented yet, but we do print out
qualified names for QualifiedDeclRefExprs as part of the AST printing.
llvm-svn: 61789
semantics and improve our handling of default arguments. Specifically,
we follow this order:
- As soon as the see the '}' in the class definition, the class is
complete and we add any implicit declarations (default constructor,
copy constructor, etc.) to the class.
- If there are any default function arguments, parse them
- If there were any inline member function definitions, parse them
As part of this change, we now keep track of the the fact that we've
seen unparsed default function arguments within the AST. See the new
ParmVarDecl::hasUnparsedDefaultArg member. This allows us to properly
cope with calls inside default function arguments to other functions
where we're making use of the default arguments.
Made some C++ error messages regarding failed initializations more
specific.
llvm-svn: 61406
DeclContext. Instead, just keep the list of currently-active
declarations and only build the OverloadedFunctionDecl when we
absolutely need it.
This is a half-step toward eliminating the need to explicitly build
OverloadedFunctionDecls that store sets of overloaded
functions. This was suggested by Argiris a while back, and it's a good
thing for several reasons: first, it eliminates the messy logic that
currently tries to keep the OverloadedFunctionDecl in sync with the
declarations that are being added. Second, it will (eventually)
eliminate the need to allocate memory for overload sets, which could
help performance. Finally, it helps set us up for when name lookup can
return multiple (possibly ambiguous) results, as can happen with
lookup of class members in C++.
Next steps: make the IdentifierResolver store overloads as separate
entries in its list rather than replacing them with an
OverloadedFunctionDecl now, then see how far we can go toward
eliminating OverloadedFunctionDecl entirely.
llvm-svn: 61357
- Overloading has to cope with having both static and non-static
member functions in the overload set.
- The call may or may not have an implicit object argument,
depending on the syntax (x.f() vs. f()) and the context (static
vs. non-static member function).
- We now generate MemberExprs for implicit member access expression.
- We now cope with mutable whenever we're building MemberExprs.
llvm-svn: 61329
which can refer to static data members, enumerators, and member
functions as well as to non-static data members.
Implement correct lvalue computation for member references in C++.
Compute the result type of non-static data members of reference type properly.
llvm-svn: 61294
and separates lexical name lookup from qualified name lookup. In
particular:
* Make DeclContext the central data structure for storing and
looking up declarations within existing declarations, e.g., members
of structs/unions/classes, enumerators in C++0x enums, members of
C++ namespaces, and (later) members of Objective-C
interfaces/implementations. DeclContext uses a lazily-constructed
data structure optimized for fast lookup (array for small contexts,
hash table for larger contexts).
* Implement C++ qualified name lookup in terms of lookup into
DeclContext.
* Implement C++ unqualified name lookup in terms of
qualified+unqualified name lookup (since unqualified lookup is not
purely lexical in C++!)
* Limit the use of the chains of declarations stored in
IdentifierInfo to those names declared lexically.
* Eliminate CXXFieldDecl, collapsing its behavior into
FieldDecl. (FieldDecl is now a ScopedDecl).
* Make RecordDecl into a DeclContext and eliminates its
Members/NumMembers fields (since one can just iterate through the
DeclContext to get the fields).
llvm-svn: 60878
"else" clause, e.g.,
if (int X = foo()) {
} else {
if (X) { // warning: X is always zero in this context
}
}
Fixes rdar://6425550 and lets me think about something other than
DeclContext.
llvm-svn: 60858
template<typename T> void f(T x) {
g(x); // g is a dependent name, so don't even bother to look it up
g(); // error: g is not a dependent name
}
Note that when we see "g(", we build a CXXDependentNameExpr. However,
if none of the call arguments are type-dependent, we will force the
resolution of the name "g" and replace the CXXDependentNameExpr with
its result.
GCC actually produces a nice error message when you make this
mistake, and even offers to compile your code with -fpermissive. I'll
do the former next, but I don't plan to do the latter.
llvm-svn: 60618
expressions, and value-dependent expressions. This permits us to parse
some template definitions.
This is not a complete solution; we're missing type- and
value-dependent computations for most of the expression types, and
we're missing checks for dependent types and type-dependent
expressions throughout Sema.
llvm-svn: 60615
the containing block. Introduce a new getCurFunctionOrMethodDecl
method to check to see if we're in a function or objc method.
Minor cleanups to other related places. This fixes rdar://6405429.
llvm-svn: 60564
instead of converting them to strings first. This also fixes a
bunch of minor inconsistencies in the diagnostics emitted by clang
and adds a bunch of FIXME's to DiagnosticKinds.def.
llvm-svn: 59948
uses of getName() with uses of getDeclName(). This upgrades a bunch of
diags to take DeclNames instead of std::strings.
This also tweaks a couple of diagnostics to be cleaner and changes
CheckInitializerTypes/PerformInitializationByConstructor to pass
around DeclarationNames instead of std::strings.
llvm-svn: 59947
with implicit quotes around them. This has a bunch of follow-on
effects and requires tweaking to a whole lot of code. This causes
a regression in two tests (xfailed) by causing it to emit things like:
Line 10: duplicate interface declaration for category 'MyClass1' ('Category1')
instead of:
Line 10: duplicate interface declaration for category 'MyClass1(Category1)'
I will fix this in a follow-up commit.
As part of this, I had to start switching stuff to use ->getDeclName() instead
of Decl::getName() for consistency. This is good, but I was planning to do this
as an independent patch. There will be several follow-on patches
to clean up some of the mess, but this patch is already too big.
llvm-svn: 59917
diags over to use this. QualTypes implicitly print single quotes around
them for uniformity and future extension.
Doing this requires a little function pointer dance to prevent libbasic
from depending on libast.
llvm-svn: 59907
with function call syntax, e.g.,
Functor f;
f(x, y);
This is the easy part of handling calls to objects of class type
(C++ [over.call.object]). The hard part (coping with conversions from
f to function pointer or reference types) will come later. Nobody uses
that stuff anyway, right? :)
llvm-svn: 59663
built-in operator candidates. Test overloading of '&' and ','.
In C++, a comma expression is an lvalue if its right-hand
subexpression is an lvalue. Update Expr::isLvalue accordingly.
llvm-svn: 59643
post-decrement, including support for generating all of the built-in
operator candidates for these operators.
C++ and C have different rules for the arguments to the builtin unary
'+' and '-'. Implemented both variants in Sema::ActOnUnaryOp.
In C++, pre-increment and pre-decrement return lvalues. Update
Expr::isLvalue accordingly.
llvm-svn: 59638
__builtin_prefetch code to only emit one diagnostic per builtin_prefetch.
While this has nothing to do with the rest of the patch, the code seemed
like overkill when I was updating it.
llvm-svn: 59588
not "int".
Fix a typo in the promotion of enumeration types that was causing some
integral promotions to look like integral conversions (leading to
extra ambiguities in overload resolution).
Check for "acceptable" overloaded operators based on the types of the
arguments. This is a somewhat odd check that is specified by the
standard, but I can't see why it actually matters: the overload
candidates it suppresses don't seem like they would ever be picked as
the best candidates.
llvm-svn: 59583
to support operators defined as member functions, e.g.,
struct X {
bool operator==(X&);
};
Overloading with non-member operators is supported, and the special
rules for the implicit object parameter (e.g., the ability for a
non-const *this to bind to an rvalue) are implemented.
This change also refactors and generalizes the code for adding
overload candidates for overloaded operator calls (C++ [over.match.expr]),
both to match the rules more exactly (name lookup of non-member
operators actually ignores member operators) and to make this routine
more reusable for the other overloaded operators.
Testing for the initialization of the implicit object parameter is
very light. More tests will come when we get support for calling
member functions directly (e.g., o.m(a1, a2)).
llvm-svn: 59564
DeclRefExprs and BlockDeclRefExprs into a single function
Sema::ActOnDeclarationNameExpr, eliminating a bunch of duplicate
lookup-name-and-check-the-result code.
Note that we still have the three parser entry points for identifiers,
operator-function-ids, and conversion-function-ids, since the parser
doesn't (and shouldn't) know about DeclarationNames. This is a Good
Thing (TM), and there will be more entrypoints coming (e.g., for C++
pseudo-destructor expressions).
llvm-svn: 59527
operator+, directly, using the same mechanism as all other special
names.
Removed the "special" identifiers for the overloaded operators from
the identifier table and IdentifierInfo data structure. IdentifierInfo
is back to representing only real identifiers.
Added a new Action, ActOnOperatorFunctionIdExpr, that builds an
expression from an parsed operator-function-id (e.g., "operator
+"). ActOnIdentifierExpr used to do this job, but
operator-function-ids are no longer represented by IdentifierInfo's.
Extended Declarator to store overloaded operator names.
Sema::GetNameForDeclarator now knows how to turn the operator
name into a DeclarationName for the overloaded operator.
Except for (perhaps) consolidating the functionality of
ActOnIdentifier, ActOnOperatorFunctionIdExpr, and
ActOnConversionFunctionExpr into a common routine that builds an
appropriate DeclRefExpr by looking up a DeclarationName, all of the
work on normalizing declaration names should be complete with this
commit.
llvm-svn: 59526
function call created in response to the use of operator syntax that
resolves to an overloaded operator in C++, e.g., "str1 +
str2" that resolves to std::operator+(str1, str2)". We now build a
CXXOperatorCallExpr in C++ when we pick an overloaded operator. (But
only for binary operators, where we actually implement overloading)
I decided *not* to refactor the current CallExpr to make it abstract
(with FunctionCallExpr and CXXOperatorCallExpr as derived
classes). Doing so would allow us to make CXXOperatorCallExpr a little
bit smaller, at the cost of making the argument and callee accessors
virtual. We won't know if this is going to be a win until we can parse
lots of C++ code to determine how much memory we'll save by making
this change vs. the performance penalty due to the extra virtual
calls.
llvm-svn: 59306
functions for built-in operators, e.g., the builtin
bool operator==(int const*, int const*)
can be used for the expression "x1 == x2" given:
struct X {
operator int const*();
} x1, x2;
The scheme for handling these built-in operators is relatively simple:
for each candidate required by the standard, create a special kind of
candidate function for the built-in. If overload resolution picks the
built-in operator, we perform the appropriate conversions on the
arguments and then let the normal built-in operator take care of it.
There may be some optimization opportunity left: if we can reduce the
number of built-in operator overloads we generate, overload resolution
for these cases will go faster. However, one must be careful when
doing this: GCC generates too few operator overloads in our little
test program, and fails to compile it because none of the overloads it
generates match.
Note that we only support operator overload for non-member binary
operators at the moment. The other operators will follow.
As part of this change, ImplicitCastExpr can now be an lvalue.
llvm-svn: 59148
operators. For example, one can now write "x + y" where x or y is a
class or enumeration type, and Clang will perform overload resolution
for "+" based on the overloaded operators it finds.
The other kinds of overloadable operators in C++ will follow this same
approach.
Three major issues remain:
1) We don't find member operators
2) Since we don't have user-defined conversion operators, we can't
call any of the built-in overloaded operators in C++ [over.built].
3) Once we've done the semantic checks, we drop the overloaded
operator on the floor; it doesn't get into the AST at all.
llvm-svn: 58821
duplication in the handling of copy-initialization by constructor,
which occurs both for initialization of a declaration and for
overloading. The initialization code is due for some refactoring.
llvm-svn: 58756
ImplicitConversionSequence and, when doing so, following the specific
rules of [over.best.ics].
The computation of the implicit conversion sequences implements C++
[over.ics.ref], but we do not (yet) have ranking for implicit
conversion sequences that use reference binding.
llvm-svn: 58357
of copy initialization. Other pieces of the puzzle:
- Try/Perform-ImplicitConversion now handles implicit conversions
that don't involve references.
- Try/Perform-CopyInitialization uses
CheckSingleAssignmentConstraints for C. PerformCopyInitialization
is now used for all argument passing and returning values from a
function.
- Diagnose errors with declaring references and const values without
an initializer. (Uses a new Action callback, ActOnUninitializedDecl).
We do not yet have implicit conversion sequences for reference
binding, which means that we don't have any overloading support for
reference parameters yet.
llvm-svn: 58353
- Do not allow expressions to ever have reference type
- Extend Expr::isLvalue to handle more cases where having written a
reference into the source implies that the expression is an lvalue
(e.g., function calls, C++ casts).
- Make GRExprEngine::VisitCall treat the call arguments as lvalues when
they are being bound to a reference parameter.
llvm-svn: 58306
- CastExpr is the root of all casts
- ImplicitCastExpr is (still) used for all explicit casts
- ExplicitCastExpr is now the root of all *explicit* casts
- ExplicitCCastExpr (new name needed!?) is a C-style cast in C or C++
- CXXFunctionalCastExpr inherits from ExplicitCastExpr
- CXXNamedCastExpr inherits from ExplicitCastExpr and is the root of all
of the C++ named cast expression types (static_cast, dynamic_cast, etc.)
- Added classes CXXStaticCastExpr, CXXDynamicCastExpr,
CXXReinterpretCastExpr, and CXXConstCastExpr to
Also, fixed returned-stack-addr.cpp, which broke once when we fixed
reinterpret_cast to diagnose double->int* conversions and again when
we eliminated implicit conversions to reference types. The fix is in
both testcase and SemaChecking.cpp.
Most of this patch is simply support for the renaming. There's very
little actual change in semantics.
llvm-svn: 58264
There is still a bug here (as the FIXME in the test case indicates). Prior to this patch, the bug would generate an error. Now, we simply do nothing (which is less harmful until we can get it right). The complete bug fix will require changing ASTContext::mergeTypes(), which I'd like to defer for now.
llvm-svn: 58241
Chris Lattner