Commit Graph

5804 Commits

Author SHA1 Message Date
David Majnemer dd9a815746 [ScalarEvolutionExpander] Properly insert no-op casts + EH Pads
We want to insert no-op casts as close as possible to the def.  This is
tricky when the cast is of a PHI node and the BasicBlocks between the
def and the use cannot hold any instructions.  Iteratively walk EH pads
until we hit a non-EH pad.

This fixes PR25326.

llvm-svn: 251393
2015-10-27 07:36:42 +00:00
Sanjoy Das 63d2b77961 [ValueTracking] Don't special case wrapped ConstantRanges; NFCI
Use `getUnsignedMax` directly instead of special casing a wrapped
ConstantRange.

The previous code would have been "buggy" (and this would have been a
semantic change) if LLVM allowed !range metadata to denote full
ranges. E.g. in

  %val = load i1, i1* %ptr, !range !{i1 1, i1 1} ;; == full set

ValueTracking would conclude that the high bit (IOW the only bit) in
%val was zero.

Since !range metadata does not allow empty or full ranges, this change
is just a minor stylistic improvement.

llvm-svn: 251380
2015-10-27 01:36:06 +00:00
Sanjoy Das 49edd3b3a8 [SCEV] Refactor out ScalarEvolution::getDataLayout; NFC
llvm-svn: 251375
2015-10-27 00:52:09 +00:00
Keno Fischer 277bfaefaf Initialize BasicAAWrapperPass in it's constructor
Summary: This idiom is used elsewhere in LLVM, but was overlooked here.

Reviewers: chandlerc

Subscribers: llvm-commits

Differential Revision: http://reviews.llvm.org/D13628

llvm-svn: 251348
2015-10-26 21:22:58 +00:00
Cong Hou fff8ccf579 Check the case that the numerator and denominator are both zeros when getting edge probabilities in BPI and return 100% in this case.
This issue is triggered in PGO mode when bootstrapping LLVM. It seems that it is not guaranteed that edge weights are always greater than zero which are read from profile data.

llvm-svn: 251317
2015-10-26 18:00:17 +00:00
James Molloy 493e57de01 [ValueTracking] Extend r251146 to catch a fairly common case
Even though we may not know the value of the shifter operand, it's possible we know the shifter operand is non-zero. This can allow us to infer more known bits - for example:

  %1 = load %p !range {1, 5}
  %2 = shl %q, %1

We don't know %1, but we do know that it is nonzero so %2[0] is known zero, and importantly %2 is known non-zero.

Calling isKnownNonZero is nontrivially expensive so use an Optional to run it lazily and cache its result.

llvm-svn: 251294
2015-10-26 14:10:46 +00:00
Davide Italiano f04d89bdb4 [ScalarEvolution] Throw away dead code.
llvm-svn: 251256
2015-10-25 20:00:49 +00:00
Davide Italiano 2071f4cc5a [ScalarEvolution] Get rid of NDEBUG in header (correctly this time).
llvm-svn: 251255
2015-10-25 19:55:24 +00:00
Davide Italiano 0c34243ac1 [ScalarEvolution] Get rid of NDEBUG in header.
llvm-svn: 251249
2015-10-25 19:13:36 +00:00
Elena Demikhovsky 092858588a Scalarizer for masked.gather and masked.scatter intrinsics.
When the target does not support these intrinsics they should be converted to a chain of scalar load or store operations.
If the mask is not constant, the scalarizer will build a chain of conditional basic blocks.
I added isLegalMaskedGather() isLegalMaskedScatter() APIs.

Differential Revision: http://reviews.llvm.org/D13722

llvm-svn: 251237
2015-10-25 15:37:55 +00:00
Benjamin Kramer 5611561e99 Use all_of to simplify control flow. NFC.
llvm-svn: 251202
2015-10-24 19:30:37 +00:00
Benjamin Kramer 74b6d3b967 Use find_if to simplify control flow. NFC.
llvm-svn: 251200
2015-10-24 19:03:15 +00:00
Benjamin Kramer 557b601b08 [BasicAliasAnalysis] Simplify expression, no functional change.
(-1) - x + 1 is the same as -x.

llvm-svn: 251185
2015-10-24 11:38:01 +00:00
Sanjoy Das a7e13782f1 Extract out getConstantRangeFromMetadata; NFC
The loop idiom creating a ConstantRange is repeated twice in the
codebase, time to give it a name and a home.

The loop is also repeated in `rangeMetadataExcludesValue`, but using
`getConstantRangeFromMetadata` there would not be an NFC -- the range
returned by `getConstantRangeFromMetadata` may contain a value that none
of the subranges did.

llvm-svn: 251180
2015-10-24 05:37:35 +00:00
Sanjoy Das bb5ffc50b7 Fix whitespace issues in two places; NFC
llvm-svn: 251179
2015-10-24 05:37:28 +00:00
Hal Finkel f2199b2178 Handle non-constant shifts in computeKnownBits, and use computeKnownBits for constant folding in InstCombine/Simplify
First, the motivation: LLVM currently does not realize that:

  ((2072 >> (L == 0)) >> 7) & 1 == 0

where L is some arbitrary value. Whether you right-shift 2072 by 7 or by 8, the
lowest-order bit is always zero. There are obviously several ways to go about
fixing this, but the generic solution pursued in this patch is to teach
computeKnownBits something about shifts by a non-constant amount. Previously,
we would give up completely on these. Instead, in cases where we know something
about the low-order bits of the shift-amount operand, we can combine (and
together) the associated restrictions for all shift amounts consistent with
that knowledge. As a further generalization, I refactored all of the logic for
all three kinds of shifts to have this capability. This works well in the above
case, for example, because the dynamic shift amount can only be 0 or 1, and
thus we can say a lot about the known bits of the result.

This brings us to the second part of this change: Even when we know all of the
bits of a value via computeKnownBits, nothing used to constant-fold the result.
This introduces the necessary code into InstCombine and InstSimplify. I've
added it into both because:

  1. InstCombine won't automatically pick up the associated logic in
     InstSimplify (InstCombine uses InstSimplify, but not via the API that
     passes in the original instruction).

  2. Putting the logic in InstCombine allows the resulting simplifications to become
     part of the iterative worklist

  3. Putting the logic in InstSimplify allows the resulting simplifications to be
     used by everywhere else that calls SimplifyInstruction (inlining, unrolling,
     and many others).

And this requires a small change to our definition of an ephemeral value so
that we don't break the rest case from r246696 (where the icmp feeding the
@llvm.assume, is also feeding a br). Under the old definition, the icmp would
not be considered ephemeral (because it is used by the br), but this causes the
assume to remove itself (in addition to simplifying the branch structure), and
it seems more-useful to prevent that from happening.

llvm-svn: 251146
2015-10-23 20:37:08 +00:00
Sanjoy Das 52f7b08b4a [SCEV] Fix stylistic issue in MatchBinaryAddToConst; NFCI
Instead of checking `(FlagsPresent & ExpectedFlags) != 0`, check
`(FlagsPresent & ExpectedFlags) == ExpectedFlags`.  Right now they're
equivalent since `ExpectedFlags` can only be either `FlagNUW` or
`FlagNSW`, but if we ever pass in `ExpectedFlags` as `FlagNUW | FlagNSW`
then checking `(FlagsPresent & ExpectedFlags) != 0` would be wrong.

llvm-svn: 251142
2015-10-23 20:09:57 +00:00
James Molloy 05a896a8d1 [BasicAA] Bugfix for r251016
If the loaded type sizes don't match the element type of the sequential type, all bets are off and the addresses may, indeed, overlap.

Surprisingly, this just got caught in one test, on one builder, out of the 30+ builders testing this change. Congratulations go to http://lab.llvm.org:8011/builders/clang-aarch64-lnt/builds/5205.

llvm-svn: 251112
2015-10-23 14:17:03 +00:00
Sanjoy Das 42801100e1 [SCEV] Get rid of an unnecessary lambda; NFC
llvm-svn: 251099
2015-10-23 06:57:21 +00:00
Sanjoy Das 0714e3e245 [SCEV] Fix a latent bug in `getPreStartForExtend`
I could not come up a way to test this -- I think this bug is latent
today, and will not actually result in a miscompile.

In `getPreStartForExtend`, SCEV constructs `PreStart` as a sum of all of
`SA`'s operands except `Op`.  It also uses `SA`'s no-wrap flags, and
this is problematic because removing an element from an add expression
can make it signed-wrap.  E.g. if `SA` was `(127 + 1 + -1)`, then it
could safely be `<nsw>` (since `sext(127) + sext(1) + sext(-1)` ==
`sext(127 + 1 + -1)`), but `(127 + 1)` (== `PreStart` if `Op` is `-1`)
is not `<nsw>`.

Transferring `<nuw>` from `SA` to `PreStart` is safe, as far as I can
tell.

llvm-svn: 251097
2015-10-23 06:33:47 +00:00
Justin Bogner f98df7a0d1 LoopPass: Remove redoLoop, it isn't used. NFC
In r251064 I removed a logically unreachable call to `redoLoop`, and
now there aren't any callers of this API at all. Remove the needless
complexity.

llvm-svn: 251067
2015-10-22 21:31:34 +00:00
Justin Bogner 35e46cdd04 LoopPass: Simplify the API for adding a new loop. NFC
The insertLoop() API is only used to add new loops, and has confusing
ownership semantics. Simplify it by replacing it with addLoop().

llvm-svn: 251064
2015-10-22 21:21:32 +00:00
Sanjoy Das eeca9f6fd4 [SCEV] Commute zero extends through <nuw> additions
llvm-svn: 251052
2015-10-22 19:57:38 +00:00
Sanjoy Das 6e78b17b43 [SCEV] Opportunistically interpret unsigned constraints as signed
Summary:
An unsigned comparision is equivalent to is corresponding signed version
if both the operands being compared are positive.  Teach SCEV to use
this fact when profitable.

Reviewers: atrick, hfinkel, reames, nlewycky

Subscribers: llvm-commits

Differential Revision: http://reviews.llvm.org/D13687

llvm-svn: 251051
2015-10-22 19:57:34 +00:00
Sanjoy Das 1123148d40 [SCEV] Teach SCEV some axioms about non-wrapping arithmetic
Summary:
 - A s<  (A + C)<nsw> if C >  0
 - A s<= (A + C)<nsw> if C >= 0
 - (A + C)<nsw> s<  A if C <  0
 - (A + C)<nsw> s<= A if C <= 0

Right now `C` needs to be a constant, but we can later generalize it to
be a non-constant if needed.

Reviewers: atrick, hfinkel, reames, nlewycky

Subscribers: sanjoy, llvm-commits

Differential Revision: http://reviews.llvm.org/D13686

llvm-svn: 251050
2015-10-22 19:57:29 +00:00
Sanjoy Das a060e602fd [SCEV] Commute sign extends through nsw additions
Summary: Depends on D13613.

Reviewers: atrick, hfinkel, reames, nlewycky

Subscribers: llvm-commits

Differential Revision: http://reviews.llvm.org/D13685

llvm-svn: 251049
2015-10-22 19:57:25 +00:00
Sanjoy Das 8f27415c05 [SCEV] Mark AddExprs as nsw or nuw if legal
Summary:
This uses `ScalarEvolution::getRange` and not potentially control
dependent `nsw` and `nuw` bits on the arithmetic instruction.

Reviewers: atrick, hfinkel, nlewycky

Subscribers: llvm-commits, sanjoy

Differential Revision: http://reviews.llvm.org/D13613

llvm-svn: 251048
2015-10-22 19:57:19 +00:00
James Molloy 5b2a732fac [GlobalsAA] Loosen an overly conservative bailout
Instead of bailing out when we see loads, analyze them. If we can prove that the loaded-from address must escape, then we can conclude that a load from that address must escape too and therefore cannot alias a non-addr-taken global.

When checking if a Value can alias a non-addr-taken global, if the Value is a LoadInst of a non-global, recurse instead of bailing.

If we can follow a trail of loads up to some base that is captured, we know by inference that all the loads we followed are also captured.

llvm-svn: 251017
2015-10-22 13:44:26 +00:00
James Molloy 5a4d8cd519 [BasicAA] Non-equal indices in a GEP of a SequentialType don't overlap
If the final indices of two GEPs can be proven to not be equal, and
the GEP is of a SequentialType (not a StructType), then the two GEPs
do not alias.

llvm-svn: 251016
2015-10-22 13:28:18 +00:00
James Molloy 1d88d6f289 [ValueTracking] Add a new predicate: isKnownNonEqual()
isKnownNonEqual(A, B) returns true if it can be determined that A != B.

At the moment it only knows two facts, that a non-wrapping add of nonzero to a value cannot be that value:

A + B != A [where B != 0, addition is nsw or nuw]

and that contradictory known bits imply two values are not equal.

This patch also hooks this up to InstSimplify; InstSimplify had a peephole for the first fact but not the second so this teaches InstSimplify a new trick too (alas no measured performance impact!)

llvm-svn: 251012
2015-10-22 13:18:42 +00:00
Chandler Carruth 2be10754a9 [AA] Enhance the new AliasAnalysis infrastructure with an optional
"external" AA wrapper pass.

This is a generic hook that can be used to thread custom code into the
primary AAResultsWrapperPass for the legacy pass manager in order to
allow it to merge external AA results into the AA results it is
building. It does this by threading in a raw callback and so it is
*very* powerful and should serve almost any use case I have come up with
for extending the set of alias analyses used. The only thing not well
supported here is using a *different order* of alias analyses. That form
of extension *is* supportable with the new pass manager, and I can make
the callback structure here more elaborate to support it in the legacy
pass manager if this is a critical use case that people are already
depending on, but the only use cases I have heard of thus far should be
reasonably satisfied by this simpler extension mechanism.

It is hard to test this using normal facilities (the built-in AAs don't
use this for obvious reasons) so I've written a fairly extensive set of
custom passes in the alias analysis unit test that should be an
excellent test case because it models the out-of-tree users: it adds
a totally custom AA to the system. This should also serve as
a reasonably good example and guide for out-of-tree users to follow in
order to rig up their existing alias analyses.

No support in opt for commandline control is provided here however. I'm
really unhappy with the kind of contortions that would be required to
support that. It would fully re-introduce the analysis group
self-recursion kind of patterns. =/

I've heard from out-of-tree users that this will unblock their use cases
with extending AAs on top of the new infrastructure and let us retain
the new analysis-group-free-world.

Differential Revision: http://reviews.llvm.org/D13418

llvm-svn: 250894
2015-10-21 12:15:19 +00:00
James Molloy 17379c4ea1 [GlobalsAA] Fix a really horrible iterator invalidation bug
We were keeping a reference to an object in a DenseMap then mutating it. At the end of the function we were attempting to clone that reference into other keys in the DenseMap, but DenseMap may well decide to resize its hashtable which would invalidate the reference!

It took an extremely complex testcase to catch this - many thanks to Zhendong Su for catching it in PR25225.

This fixes PR25225.

llvm-svn: 250692
2015-10-19 08:54:59 +00:00
Elena Demikhovsky 20662e39f1 Removed parameter "Consecutive" from isLegalMaskedLoad() / isLegalMaskedStore().
Originally I planned to use the same interface for masked gather/scatter and set isConsecutive to "false" in this case.

Now I'm implementing masked gather/scatter and see that the interface is inconvenient. I want to add interfaces isLegalMaskedGather() / isLegalMaskedScatter() instead of using the "Consecutive" parameter in the existing interfaces.

Differential Revision: http://reviews.llvm.org/D13850

llvm-svn: 250686
2015-10-19 07:43:38 +00:00
Sanjoy Das d295f2c7ca [SCEV] Fix whitespace issues and remove extra braces; NFC
llvm-svn: 250636
2015-10-18 00:29:27 +00:00
Sanjoy Das f07d2a7143 [SCEV] Use std::all_of and std::any_of; NFC
llvm-svn: 250635
2015-10-18 00:29:23 +00:00
Sanjoy Das 6391459069 [SCEV] Use auto where it helps remove line breaks; NFC
llvm-svn: 250634
2015-10-18 00:29:20 +00:00
Sanjoy Das d9f6d33a7f [SCEV] Use range for loops; NFC
llvm-svn: 250633
2015-10-18 00:29:16 +00:00
Manman Ren 72d44b1b09 Recommit r250345, it was reverted in r250366 to investigate a bot failure.
Our internal bot is still red after r250366.

llvm-svn: 250415
2015-10-15 14:59:40 +00:00
Aaron Ballman 58f413c518 Silencing a -Wtype-limits warning; an unsigned value will always be >= 0; NFC.
llvm-svn: 250404
2015-10-15 13:55:43 +00:00
Manman Ren f5499fd9d5 Temporarily revert r250345 to sort out bot failure.
With r250345 and r250343, we start to observe the following failure
when bootstrap clang with lto and pgo:
PHI node entries do not match predecessors!
  %.sroa.029.3.i = phi %"class.llvm::SDNode.13298"* [ null, %30953 ], [ null, %31017 ], [ null, %30998 ], [ null, %_ZN4llvm8dyn_castINS_14ConstantSDNodeENS_7SDValueEEENS_10cast_rettyIT_T0_E8ret_typeERS5_.exit.i.1804 ], [ null, %30975 ], [ null, %30991 ], [ null, %_ZNK4llvm3EVT13getScalarTypeEv.exit.i.1812 ], [ %..sroa.029.0.i, %_ZN4llvm11SmallVectorIiLj8EED1Ev.exit.i.1826 ], !dbg !451895
label %30998
label %_ZNK4llvm3EVTeqES0_.exit19.thread.i
LLVM ERROR: Broken function found, compilation aborted!

I will re-commit this if the bot does not recover.

llvm-svn: 250366
2015-10-15 04:58:24 +00:00
Cong Hou b74d3b3b86 Update the branch weight metadata in JumpThreading pass.
Currently in JumpThreading pass, the branch weight metadata is not updated after CFG modification. Consider the jump threading on PredBB, BB, and SuccBB. After jump threading, the weight on BB->SuccBB should be adjusted as some of it is contributed by the edge PredBB->BB, which doesn't exist anymore. This patch tries to update the edge weight in metadata on BB->SuccBB by scaling it by 1 - Freq(PredBB->BB) / Freq(BB->SuccBB).

This is the third attempt to submit this patch, while the first two led to failures in some FDO tests. After investigation, it is the edge weight normalization that caused those failures. In this patch the edge weight normalization is fixed so that there is no zero weight in the output and the sum of all weights can fit in 32-bit integer. Several unit tests are added.

Differential revision: http://reviews.llvm.org/D10979

llvm-svn: 250345
2015-10-14 23:14:17 +00:00
Philip Reames ddcf6b35a2 Tighten known bits for ctpop based on zero input bits
This is a cleaned up patch from the one written by John Regehr based on the findings of the Souper superoptimizer.

The basic idea here is that input bits that are known zero reduce the maximum count that the intrinsic could return. We know that the number of bits required to represent a particular count is at most log2(N)+1.

Differential Revision: http://reviews.llvm.org/D13253

llvm-svn: 250338
2015-10-14 22:42:12 +00:00
Manman Ren 2c8e16d507 Revert r250204 and r250240 due to bot failure. We failed to build PGO-ed clang.
llvm-svn: 250264
2015-10-14 03:04:03 +00:00
Kostya Serebryany 5cb86d5a40 [asan] Disabling speculative loads under asan. Patch by Mike Aizatsky
llvm-svn: 250259
2015-10-14 00:21:05 +00:00
Sanjoy Das 16e7ff171b [SCEV] Use `SCEV::isAllOnesValue` directly; NFC.
Instead of `dyn_cast` ing to `SCEVConstant` and checking the contained
`ConstantInteger.

llvm-svn: 250251
2015-10-13 23:28:31 +00:00
Cong Hou 7ab123a5cf Update the branch weight metadata in JumpThreading pass.
Currently in JumpThreading pass, the branch weight metadata is not updated after CFG modification. Consider the jump threading on PredBB, BB, and SuccBB. After jump threading, the weight on BB->SuccBB should be adjusted as some of it is contributed by the edge PredBB->BB, which doesn't exist anymore. This patch tries to update the edge weight in metadata on BB->SuccBB by scaling it by 1 - Freq(PredBB->BB) / Freq(BB->SuccBB).

Differential revision: http://reviews.llvm.org/D10979

llvm-svn: 250204
2015-10-13 18:43:10 +00:00
James Molloy 860507f838 [GlobalsAA] Don't assume anything about functions that may be overridden
Weak linkage and friends allow a symbol to be overriden outside the
code generator's model, so GlobalsAA shouldn't assume that anything it
can compute about such a symbol is valid.

llvm-svn: 250156
2015-10-13 10:43:33 +00:00
Manman Ren 9f824dab1d Revert 250089 due to bot failure. It failed when building clang itself with PGO.
llvm-svn: 250145
2015-10-13 03:38:02 +00:00
Sanjoy Das 1ed6910338 [SCEV] Put some utilites in the ScalarEvolution class
In a later commit, `SplitBinaryAdd` will be used outside `IsConstDiff`,
so lift that out.  And lift out `IsConstDiff` as
`computeConstantDifference` to keep things clean and to avoid playing
C++ access specifier games.

NFC.

llvm-svn: 250143
2015-10-13 02:53:27 +00:00
Cong Hou 3320bcd815 Update the branch weight metadata in JumpThreading pass.
In JumpThreading pass, the branch weight metadata is not updated after CFG modification. Consider the jump threading on PredBB, BB, and SuccBB. After jump threading, the weight on BB->SuccBB should be adjusted as some of it is contributed by the edge PredBB->BB, which doesn't exist anymore. This patch tries to update the edge weight in metadata on BB->SuccBB by scaling it by 1 - Freq(PredBB->BB) / Freq(BB->SuccBB). 

Differential revision: http://reviews.llvm.org/D10979

llvm-svn: 250089
2015-10-12 19:44:08 +00:00