This broke Chromium's PGO build, it seems because hot-cold-splitting got turned
on unintentionally. See comment on the code review for repro etc.
> This patch adds -f[no-]split-cold-code CC1 options to clang. This allows
> the splitting pass to be toggled on/off. The current method of passing
> `-mllvm -hot-cold-split=true` to clang isn't ideal as it may not compose
> correctly (say, with `-O0` or `-Oz`).
>
> To implement the -fsplit-cold-code option, an attribute is applied to
> functions to indicate that they may be considered for splitting. This
> removes some complexity from the old/new PM pipeline builders, and
> behaves as expected when LTO is enabled.
>
> Co-authored by: Saleem Abdulrasool <compnerd@compnerd.org>
> Differential Revision: https://reviews.llvm.org/D57265
> Reviewed By: Aditya Kumar, Vedant Kumar
> Reviewers: Teresa Johnson, Aditya Kumar, Fedor Sergeev, Philip Pfaffe, Vedant Kumar
This reverts commit 273c299d5d.
This patch adds -f[no-]split-cold-code CC1 options to clang. This allows
the splitting pass to be toggled on/off. The current method of passing
`-mllvm -hot-cold-split=true` to clang isn't ideal as it may not compose
correctly (say, with `-O0` or `-Oz`).
To implement the -fsplit-cold-code option, an attribute is applied to
functions to indicate that they may be considered for splitting. This
removes some complexity from the old/new PM pipeline builders, and
behaves as expected when LTO is enabled.
Co-authored by: Saleem Abdulrasool <compnerd@compnerd.org>
Differential Revision: https://reviews.llvm.org/D57265
Reviewed By: Aditya Kumar, Vedant Kumar
Reviewers: Teresa Johnson, Aditya Kumar, Fedor Sergeev, Philip Pfaffe, Vedant Kumar
-loop-extract-single is just -loop-extract on one loop.
-loop-extract depended on -break-crit-edges and -loop-simplify in the
legacy PM, but the NPM doesn't allow specifying pass dependencies like
that, so manually add those passes to the RUN lines where necessary.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D89016
In the NPM, a pass cannot depend on another non-analysis pass. So pin
the test that tests that -lowerswitch is run automatically to legacy PM.
Reviewed By: sameerds
Differential Revision: https://reviews.llvm.org/D89051
This removes "VerifyEachPass" parameters from a lot of functions which is nice.
Don't verify after special passes or VerifierPass.
This introduces verification on loop and cgscc passes, verifying the corresponding function/module.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D88764
This makes the NPM skip not required passes on functions marked optnone.
If this causes a pass that should be required but has not been marked
required to be skipped, add
`static bool isRequired() { return true; }`
to the pass class. AlwaysInlinerPass is an example.
clang/test/CodeGen/O0-no-skipped-passes.c is useful for checking that
no passes are skipped under -O0.
The -enable-npm-optnone option will be removed once this has been stable
for long enough without issues.
Reviewed By: ychen, asbirlea
Differential Revision: https://reviews.llvm.org/D87869
A new hidden option -print-changed is added along with code to support
printing the IR as it passes through the opt pipeline in the new pass
manager. Only those passes that change the IR are reported, with others
only having the banner reported, indicating that they did not change the
IR, were filtered out or ignored. Filtering of output via the
-filter-print-funcs is supported and a new supporting hidden option
-filter-passes is added. The latter takes a comma separated list of pass
names and filters the output to only show those passes in the list that
change the IR. The output can also be modified via the -print-module-scope
function.
The code introduces an abstract template base class that generalizes the
comparison of IRs that takes an IR representation as template parameter.
Derived classes provide overrides that provide an event based API
for generalized reporting of IRs as they are changed in the opt pipeline
through the new pass manager.
The first of several instantiations is provided that prints the IR
in a form similar to that produced by -print-after-all with the above
mentioned filtering capabilities. This version, and the others to
follow will be introduced at the upcoming developer's conference.
Reviewed By: aeubanks (Arthur Eubanks), yrouban (Yevgeny Rouban), ychen (Yuanfang Chen), MaskRay (Fangrui Song)
Differential Revision: https://reviews.llvm.org/D86360
This is a simple pass that flattens nested loops. The intention is to optimise
loop nests like this, which together access an array linearly:
for (int i = 0; i < N; ++i)
for (int j = 0; j < M; ++j)
f(A[i*M+j]);
into one loop:
for (int i = 0; i < (N*M); ++i)
f(A[i]);
It can also flatten loops where the induction variables are not used in the
loop. This can help with codesize and runtime, especially on simple cpus
without advanced branch prediction.
This is only worth flattening if the induction variables are only used in an
expression like i*M+j. If they had any other uses, we would have to insert a
div/mod to reconstruct the original values, so this wouldn't be profitable.
This partially fixes PR40581 as this pass triggers on one of the two cases. I
will follow up on this to learn LoopFlatten a few more (small) tricks. Please
note that LoopFlatten is not yet enabled by default.
Patch by Oliver Stannard, with minor tweaks from Dave Green and myself.
Differential Revision: https://reviews.llvm.org/D42365
The legacy pass's default constructor sets UseCommandLine = true and
goes down a separate testing route. Match that in the NPM pass.
This fixes all tests in llvm/test/Transforms/WholeProgramDevirt under NPM.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D88588
bug 45566 shows the process of building coroutine frame won't consider
that the lifetimes of different local variables are not overlapped,
which means the compiler could generates smaller frame.
This patch calculate the lifetime range of each alloca by StackLifetime
class. Then the patch build non-overlapped sets for allocas whose
lifetime ranges are not overlapped. We use the largest type in a
non-overlapped set as the field type in the frame. In insertSpills
process, if we find the type of field is not the same with the alloca,
we cast the pointer to the field type to the pointer to the alloca type.
Since the lifetime range of alloca in one non-overlapped set is not
overlapped with each other, it should be ok to reuse the storage space
in the frame.
Test plan: check-llvm, check-clang, cppcoro, folly
Reviewers: junparser, lxfind, modocache
Differential Revision: https://reviews.llvm.org/D87596
If -enable-constraint-elimination is specified, add it to the -O2/-O3 pipeline.
(-O1 uses a separate function now.)
Reviewed By: fhahn, aeubanks
Differential Revision: https://reviews.llvm.org/D88365
This matches the legacy PM pass by having one constructor use command
line flags, and the other use parameters to the pass.
This fixes all tests under Transforms/LowerTypeTests using NPM.
Reviewed By: ychen, pcc
Differential Revision: https://reviews.llvm.org/D87845
This introduces an analysis pass that wraps IRSimilarityIdentifier,
and adds a printer pass to examine in what function similarities are
being found.
Test for what the printer pass can find are in
test/Analysis/IRSimilarityIdentifier.
Reviewed by: paquette, jroelofs
Differential Revision: https://reviews.llvm.org/D86973
This is in preparation for supporting -debugify-each, which adds a debug
info pass before and after each pass.
Switch VerifyEach to use this.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D88107
This matches the legacy PM name and makes all tests in
Transforms/LoopSimplifyCFG pass under NPM.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D87948
Really it should be named print<alias-sets>, but for the sake of
changing fewer tests, added a TODO to rename after NPM switch and test
cleanup.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D87713
A new hidden option -print-changed is added along with code to support
printing the IR as it passes through the opt pipeline in the new pass
manager. Only those passes that change the IR are reported, with others
only having the banner reported, indicating that they did not change the
IR, were filtered out or ignored. Filtering of output via the
-filter-print-funcs is supported and a new supporting hidden option
-filter-passes is added. The latter takes a comma separated list of pass
names and filters the output to only show those passes in the list that
change the IR. The output can also be modified via the -print-module-scope
function.
The code introduces a template base class that generalizes the comparison
of IRs that takes an IR representation as template parameter. The
constructor takes a series of lambdas that provide an event based API
for generalized reporting of IRs as they are changed in the opt pipeline
through the new pass manager.
The first of several instantiations is provided that prints the IR
in a form similar to that produced by -print-after-all with the above
mentioned filtering capabilities. This version, and the others to
follow will be introduced at the upcoming developer's conference.
Reviewed By: aeubanks (Arthur Eubanks), yrouban (Yevgeny Rouban), ychen (Yuanfang Chen)
Differential Revision: https://reviews.llvm.org/D86360
'require<globals-aa>' is needed to make globals-aa work in NPM, since
globals-aa is a module analysis but function passes cannot run module
analyses on demand.
So don't skip translating alias analyses to 'require<>'.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D87743
D65060 was reverted because it introduced non-determinism by using BFI counts from already freed blocks. The parent of this revision fixes that by using a VH callback on blocks to prevent this from happening and makes sure BFI data is passed correctly in LoopStandardAnalysisResults.
This re-introduces the previous optimization of using BFI data to prevent LICM from hoisting/sinking if the instruction will end up moving to a colder block.
Internally at Facebook this change results in a ~7% win in a CPU related metric in one of our big services by preventing hoisting cold code into a hot pre-header like the added test case demonstrates.
Testing:
ninja check
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D87551
~~D65060 uncovered that trying to use BFI in loop passes can lead to non-deterministic behavior when blocks are re-used while retaining old BFI data.~~
~~To make sure BFI is preserved through loop passes a Value Handle (VH) callback is registered on blocks themselves. When a block is freed it now also wipes out the accompanying BFI entry such that stale BFI data can no longer persist resolving the determinism issue. ~~
~~An optimistic approach would be to incrementally update BFI information throughout the loop passes rather than only invalidating them on removed blocks. The issues with that are:~~
~~1. It is not clear how BFI information should be incrementally updated: If a block is duplicated does its BFI information come with? How about if it's split/modified/moved around? ~~
~~2. Assuming we can address these problems the implementation here will be a massive undertaking. ~~
~~There's a known need of BFI in LICM analysis which requires correct but not incrementally updated BFI data. A follow-up change can register BFI in all loop passes so this preserved but potentially lossy data is available to any loop pass that wants it.~~
See: D75341 for an identical implementation of preserving BFI via VH callbacks. The previous statements do still apply but this change no longer has to be in this diff because it's already upstream 😄 .
This diff also moves BFI to be a part of LoopStandardAnalysisResults since the previous method using getCachedResults now (correctly!) statically asserts (D72893) that this data isn't static through the loop passes.
Testing
Ninja check
Reviewed By: asbirlea, nikic
Differential Revision: https://reviews.llvm.org/D86156
Was missing MODULE_ALIAS_ANALYSIS, previously only FUNCTION_ALIAS_ANALYSIS was taken into account.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D87664
As to not conflict with the legacy PM example passes under
llvm/lib/Transforms/Hello, this is under HelloNew. This makes the
CMakeLists.txt and general directory structure less confusing for people
following the example.
Much of the doc structure was taken from WritinAnLLVMPass.rst.
This adds a HelloWorld pass which simply prints out each function name.
More will follow after this, e.g. passes over different units of IR, analyses.
https://llvm.org/docs/WritingAnLLVMPass.html contains a lot more.
Relanded with missing "Support" dependency in LLVMBuild.txt.
Reviewed By: ychen, asbirlea
Differential Revision: https://reviews.llvm.org/D86979
As to not conflict with the legacy PM example passes under
llvm/lib/Transforms/Hello, this is under HelloNew. This makes the
CMakeLists.txt and general directory structure less confusing for people
following the example.
Much of the doc structure was taken from WritinAnLLVMPass.rst.
This adds a HelloWorld pass which simply prints out each function name.
More will follow after this, e.g. passes over different units of IR, analyses.
https://llvm.org/docs/WritingAnLLVMPass.html contains a lot more.
Reviewed By: ychen, asbirlea
Differential Revision: https://reviews.llvm.org/D86979
This is consistent with the clang option added in
7ed8124d46, and the comments on the
runtime patch in D87120.
Differential Revision: https://reviews.llvm.org/D87622
Check that all passes, which report they preserve CFG,
are really preserving CFG.
A new standard instrumentation is introduced. It can be
switched on/off by the flag verify-cfg-preserved, which
is on by default for debug builds.
Reviewers: kuhar, fedor.sergeev
Differential Revision: https://reviews.llvm.org/D81558
This patch enables inserting freeze when JumpThreading converts a select to
a conditional branch when it is run in LTO.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D85534
This was reverted in 503deec218
because it caused gigantic increase (3x) in branch mispredictions
in certain benchmarks on certain CPU's,
see https://reviews.llvm.org/D84108#2227365.
It has since been investigated and here are the results:
https://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20200907/827578.html
> It's an amazingly severe regression, but it's also all due to branch
> mispredicts (about 3x without this). The code layout looks ok so there's
> probably something else to deal with. I'm not sure there's anything we can
> reasonably do so we'll just have to take the hit for now and wait for
> another code reorganization to make the branch predictor a bit more happy :)
>
> Thanks for giving us some time to investigate and feel free to recommit
> whenever you'd like.
>
> -eric
So let's just reland this.
Original commit message:
I've been looking at missed vectorizations in one codebase.
One particular thing that stands out is that some of the loops
reach vectorizer in a rather mangled form, with weird PHI's,
and some of the loops aren't even in a rotated form.
After taking a more detailed look, that happened because
the loop's headers were too big by then. It is evident that
SimplifyCFG's common code hoisting transform is at fault there,
because the pattern it handles is precisely the unrotated
loop basic block structure.
Surprizingly, `SimplifyCFGOpt::HoistThenElseCodeToIf()` is enabled
by default, and is always run, unlike it's friend, common code sinking
transform, `SinkCommonCodeFromPredecessors()`, which is not enabled
by default and is only run once very late in the pipeline.
I'm proposing to harmonize this, and disable common code hoisting
until //late// in pipeline. Definition of //late// may vary,
here currently i've picked the same one as for code sinking,
but i suppose we could enable it as soon as right after
loop rotation happens.
Experimentation shows that this does indeed unsurprizingly help,
more loops got rotated, although other issues remain elsewhere.
Now, this undoubtedly seriously shakes phase ordering.
This will undoubtedly be a mixed bag in terms of both compile- and
run- time performance, codesize. Since we no longer aggressively
hoist+deduplicate common code, we don't pay the price of said hoisting
(which wasn't big). That may allow more loops to be rotated,
so we pay that price. That, in turn, that may enable all the transforms
that require canonical (rotated) loop form, including but not limited to
vectorization, so we pay that too. And in general, no deduplication means
more [duplicate] instructions going through the optimizations. But there's still
late hoisting, some of them will be caught late.
As per benchmarks i've run {F12360204}, this is mostly within the noise,
there are some small improvements, some small regressions.
One big regression i saw i fixed in rG8d487668d09fb0e4e54f36207f07c1480ffabbfd, but i'm sure
this will expose many more pre-existing missed optimizations, as usual :S
llvm-compile-time-tracker.com thoughts on this:
http://llvm-compile-time-tracker.com/compare.php?from=e40315d2b4ed1e38962a8f33ff151693ed4ada63&to=c8289c0ecbf235da9fb0e3bc052e3c0d6bff5cf9&stat=instructions
* this does regress compile-time by +0.5% geomean (unsurprizingly)
* size impact varies; for ThinLTO it's actually an improvement
The largest fallout appears to be in GVN's load partial redundancy
elimination, it spends *much* more time in
`MemoryDependenceResults::getNonLocalPointerDependency()`.
Non-local `MemoryDependenceResults` is widely-known to be, uh, costly.
There does not appear to be a proper solution to this issue,
other than silencing the compile-time performance regression
by tuning cut-off thresholds in `MemoryDependenceResults`,
at the cost of potentially regressing run-time performance.
D84609 attempts to move in that direction, but the path is unclear
and is going to take some time.
If we look at stats before/after diffs, some excerpts:
* RawSpeed (the target) {F12360200}
* -14 (-73.68%) loops not rotated due to the header size (yay)
* -272 (-0.67%) `"Number of live out of a loop variables"` - good for vectorizer
* -3937 (-64.19%) common instructions hoisted
* +561 (+0.06%) x86 asm instructions
* -2 basic blocks
* +2418 (+0.11%) IR instructions
* vanilla test-suite + RawSpeed + darktable {F12360201}
* -36396 (-65.29%) common instructions hoisted
* +1676 (+0.02%) x86 asm instructions
* +662 (+0.06%) basic blocks
* +4395 (+0.04%) IR instructions
It is likely to be sub-optimal for when optimizing for code size,
so one might want to change tune pipeline by enabling sinking/hoisting
when optimizing for size.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D84108
This reverts commit 503deec218.
This also changes -lint from an analysis to a pass. It's similar to
-verify, and that is a normal pass, and lives in llvm/IR.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D87057
A new hidden option -print-changed is added along with code to support
printing the IR as it passes through the opt pipeline in the new pass
manager. Only those passes that change the IR are reported, with others
only having the banner reported, indicating that they did not change the
IR, were filtered out or ignored. Filtering of output via the
-filter-print-funcs is supported and a new supporting hidden option
-filter-passes is added. The latter takes a comma separated list of pass
names and filters the output to only show those passes in the list that
change the IR. The output can also be modified via the -print-module-scope
function.
The code introduces a template base class that generalizes the comparison
of IRs that takes an IR representation as template parameter. The
constructor takes a series of lambdas that provide an event based API
for generalized reporting of IRs as they are changed in the opt pipeline
through the new pass manager.
The first of several instantiations is provided that prints the IR
in a form similar to that produced by -print-after-all with the above
mentioned filtering capabilities. This version, and the others to
follow will be introduced at the upcoming developer's conference.
See https://hotcrp.llvm.org/usllvm2020/paper/29 for more information.
Reviewed By: yrouban (Yevgeny Rouban)
Differential Revision: https://reviews.llvm.org/D86360
This also changes -lint from an analysis to a pass. It's similar to
-verify, and that is a normal pass, and lives in llvm/IR.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D87057
Since doInitialization() in the legacy pass modifies the module, the NPM
pass is a Module pass.
Reviewed By: ahatanak, ychen
Differential Revision: https://reviews.llvm.org/D86178
See RFC for background:
http://lists.llvm.org/pipermail/llvm-dev/2020-June/142744.html
Note that the runtime changes will be sent separately (hopefully this
week, need to add some tests).
This patch includes the LLVM pass to instrument memory accesses with
either inline sequences to increment the access count in the shadow
location, or alternatively to call into the runtime. It also changes
calls to memset/memcpy/memmove to the equivalent runtime version.
The pass is modeled on the address sanitizer pass.
The clang changes add the driver option to invoke the new pass, and to
link with the upcoming heap profiling runtime libraries.
Currently there is no attempt to optimize the instrumentation, e.g. to
aggregate updates to the same memory allocation. That will be
implemented as follow on work.
Differential Revision: https://reviews.llvm.org/D85948
As disscussed in post-commit review starting with
https://reviews.llvm.org/D84108#2227365
while this appears to be mostly a win overall, especially code-size-wise,
this appears to shake //certain// code pattens in a way that is extremely
unfavorable for performance (+30% runtime regression)
on certain CPU's (i personally can't reproduce).
So until the behaviour is better understood, and a path forward is mapped,
let's back this out for now.
This reverts commit 1d51dc38d8.
Both AfterPass and AfterPassInvalidated pass instrumentation
callbacks get additional parameter of type PreservedAnalyses.
This patch was created by @fedor.sergeev. I have just slightly
changed it.
Reviewers: fedor.sergeev
Differential Revision: https://reviews.llvm.org/D81555
This exposes the module optimization pipeline as a pass that can be
applied stand-alone when using 'opt'. This helps ml inliner training
scenarios, where we start with IR captured right before inlining,
perform the inlining (-scc-oz-module-inliner) and then want to continue
and observe the final IR (where this patch comes into play). We can then
apply llc on the resulting IR to continue compilation down to native.
Differential Revision: https://reviews.llvm.org/D86224
This is a non-functional-change to generalize the printIR routines so that
the output can be saved and manipulated rather than being directly output
to dbgs(). This is a prerequisite change for many upcoming changes that
allow new ways of examining changes made to the IR in the new pass manager.
Reviewed By: aeubanks (Arthur Eubanks)
Differential Revision: https://reviews.llvm.org/D85999
If OptNoneInstrumentation prints it instead, 'Skipping pass' will print for even required passes.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D85493
For consistency with legacy pass name.
Helps with 37 instances of "unknown pass name 'tbaa'" in check-llvm under NPM.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D84967
Problem:
Right now, our "Running pass" is not accurate when passes are wrapped in adaptor because adaptor is never skipped and a pass could be skipped. The other problem is that "Running pass" for a adaptor is before any "Running pass" of passes/analyses it depends on. (for example, FunctionToLoopPassAdaptor). So the order of printing is not the actual order.
Solution:
Doing things like PassManager::Debuglogging is very intrusive because we need to specify Debuglogging whenever adaptor is created. (Actually, right now we're not specifying Debuglogging for some sub-PassManagers. Check PassBuilder)
This patch move debug logging for pass as a PassInstrument callback. We could be sure that all running passes are logged and in the correct order.
This could also be used to implement hierarchy pass logging in legacy PM. We could also move logging of pass manager to this if we want.
The test fixes looks messy. It includes changes:
- Remove PassInstrumentationAnalysis
- Remove PassAdaptor
- If a PassAdaptor is for a real pass, the pass is added
- Pass reorder (to the correct order), related to PassAdaptor
- Add missing passes (due to Debuglogging not passed down)
Reviewed By: asbirlea, aeubanks
Differential Revision: https://reviews.llvm.org/D84774
I've been looking at missed vectorizations in one codebase.
One particular thing that stands out is that some of the loops
reach vectorizer in a rather mangled form, with weird PHI's,
and some of the loops aren't even in a rotated form.
After taking a more detailed look, that happened because
the loop's headers were too big by then. It is evident that
SimplifyCFG's common code hoisting transform is at fault there,
because the pattern it handles is precisely the unrotated
loop basic block structure.
Surprizingly, `SimplifyCFGOpt::HoistThenElseCodeToIf()` is enabled
by default, and is always run, unlike it's friend, common code sinking
transform, `SinkCommonCodeFromPredecessors()`, which is not enabled
by default and is only run once very late in the pipeline.
I'm proposing to harmonize this, and disable common code hoisting
until //late// in pipeline. Definition of //late// may vary,
here currently i've picked the same one as for code sinking,
but i suppose we could enable it as soon as right after
loop rotation happens.
Experimentation shows that this does indeed unsurprizingly help,
more loops got rotated, although other issues remain elsewhere.
Now, this undoubtedly seriously shakes phase ordering.
This will undoubtedly be a mixed bag in terms of both compile- and
run- time performance, codesize. Since we no longer aggressively
hoist+deduplicate common code, we don't pay the price of said hoisting
(which wasn't big). That may allow more loops to be rotated,
so we pay that price. That, in turn, that may enable all the transforms
that require canonical (rotated) loop form, including but not limited to
vectorization, so we pay that too. And in general, no deduplication means
more [duplicate] instructions going through the optimizations. But there's still
late hoisting, some of them will be caught late.
As per benchmarks i've run {F12360204}, this is mostly within the noise,
there are some small improvements, some small regressions.
One big regression i saw i fixed in rG8d487668d09fb0e4e54f36207f07c1480ffabbfd, but i'm sure
this will expose many more pre-existing missed optimizations, as usual :S
llvm-compile-time-tracker.com thoughts on this:
http://llvm-compile-time-tracker.com/compare.php?from=e40315d2b4ed1e38962a8f33ff151693ed4ada63&to=c8289c0ecbf235da9fb0e3bc052e3c0d6bff5cf9&stat=instructions
* this does regress compile-time by +0.5% geomean (unsurprizingly)
* size impact varies; for ThinLTO it's actually an improvement
The largest fallout appears to be in GVN's load partial redundancy
elimination, it spends *much* more time in
`MemoryDependenceResults::getNonLocalPointerDependency()`.
Non-local `MemoryDependenceResults` is widely-known to be, uh, costly.
There does not appear to be a proper solution to this issue,
other than silencing the compile-time performance regression
by tuning cut-off thresholds in `MemoryDependenceResults`,
at the cost of potentially regressing run-time performance.
D84609 attempts to move in that direction, but the path is unclear
and is going to take some time.
If we look at stats before/after diffs, some excerpts:
* RawSpeed (the target) {F12360200}
* -14 (-73.68%) loops not rotated due to the header size (yay)
* -272 (-0.67%) `"Number of live out of a loop variables"` - good for vectorizer
* -3937 (-64.19%) common instructions hoisted
* +561 (+0.06%) x86 asm instructions
* -2 basic blocks
* +2418 (+0.11%) IR instructions
* vanilla test-suite + RawSpeed + darktable {F12360201}
* -36396 (-65.29%) common instructions hoisted
* +1676 (+0.02%) x86 asm instructions
* +662 (+0.06%) basic blocks
* +4395 (+0.04%) IR instructions
It is likely to be sub-optimal for when optimizing for code size,
so one might want to change tune pipeline by enabling sinking/hoisting
when optimizing for size.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D84108
To match NewPM pass name, and also for readability.
Also rename rpo-functionattrs -> rpo-function-attrs while we're here.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D84694
(This reverts commit a5e0194709, and
corrects author).
Rename the pass to be able to extend it to function properties other than inliner features.
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D82044
Rename the pass to be able to extend it to function properties other than inliner features.
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D82044
Pass LowerMatrixIntrinsics wasn't running yet running under the new pass
manager, and this adds LowerMatrixIntrinsics to the pipeline (to the
same place as where it is running in the old PM).
Differential Revision: https://reviews.llvm.org/D84180
OptNoneInstrumentation is part of StandardInstrumentations. It skips
functions (or loops) that are marked optnone.
The feature of skipping optional passes for optnone functions under NPM
is gated on a -enable-npm-optnone flag. Currently it is by default
false. That is because we still need to mark all required passes to be
required. Otherwise optnone functions will start having incorrect
semantics. After that is done in following changes, we can remove the
flag and always enable this.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D83519
Common code sinking is already guarded with a (with default-off!) flag,
so add a flag for hoisting, too.
D84108 will hopefully make hoisting off-by-default too.
Currently, when parsing text pipeline, different kinds of passes always
introduce nested pass managers. This makes it impossible to test the
adaptor-wrapped user passes from the text pipeline interface which is needed
by D82344 test cases. This also seems useful in general. See comments above
`parsePassPipeline`.
The syntax would be like mixing passes of different types, but it is
not the same as inferring the correct pass type and then adding the
matching nested pass managers. Strictly speaking, the resulted pipelines
are different.
Reviewed By: asbirlea, aeubanks
Differential Revision: https://reviews.llvm.org/D82698
This restores commit 80d0a137a5, and the
follow on fix in 873c0d0786, with a new
fix for test failures after a 2-stage clang bootstrap, and a more robust
fix for the Chromium build failure that an earlier version partially
fixed. See also discussion on D75201.
Reviewers: evgeny777
Subscribers: mehdi_amini, Prazek, hiraditya, steven_wu, dexonsmith, arphaman, davidxl, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73242
This reverts commit 9908a3b9f5.
The fix was to exclude the content of TFUtils.h (automatically
included in the LLVM_Analysis module, when LLVM_ENABLE_MODULES is enabled).
Differential Revision: https://reviews.llvm.org/D82817
Summary:
This is an experimental ML-based native size estimator, necessary for
computing partial rewards during -Oz inliner policy training. Data
extraction for model training will be provided in a separate patch.
RFC: http://lists.llvm.org/pipermail/llvm-dev/2020-April/140763.html
Reviewers: davidxl, jdoerfert
Subscribers: mgorny, hiraditya, mgrang, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82817
PassInfoMixin should be used for all NPM passes, rater than a custom
`name()`.
This caused ambiguous references in LegacyPassManager.cpp, so had to
remove "using namespace llvm::legacy" and move some things around.
Reviewed By: ychen, asbirlea
Differential Revision: https://reviews.llvm.org/D83498
PassInfoMixin should be used for all NPM passes, rater than a custom
`name()`.
This caused ambiguous references in LegacyPassManager.cpp, so had to
remove "using namespace llvm::legacy" and move some things around.
The passes had to be moved to the llvm namespace, or else they would get
printed as "(anonymous namespace)::FooPass".
Reviewed By: ychen, asbirlea
Differential Revision: https://reviews.llvm.org/D83498
The legacy pass name is "loop-fusion".
Fixes most tests under Transforms/LoopFusion under NPM.
Reviewed By: Whitney
Differential Revision: https://reviews.llvm.org/D83066
The legacy pass was called "loop-reduce".
This lowers the number of check-llvm failures under NPM by 83.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D82925
Summary:
Old PM runs SpeculativeExecutionPass for targets that have divergent branches.
It uses `createSpeculativeExecutionIfHasBranchDivergencePass` that creates
the pass with `OnlyIfDivergentTarget=true`, whereas new PM just created the
pass with default `OnlyIfDivergentTarget=fase` so it unexpectedly runs and
causes buildbot test fails.
Reviewers: chandlerc, arsenm
Reviewed By: arsenm
Subscribers: wdng, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82735
Is teaching the LoopFullUnrollPass to preserve MemorySSA very hard or
just impossible?
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D82618
The legacy pass is called "loop-unroll", but in the new PM it's called "unroll".
Also applied to unroll-and-jam and unroll-full.
Fixes various check-llvm tests when NPM is turned on.
Reviewed By: Whitney, dmgreen
Differential Revision: https://reviews.llvm.org/D82590
Summary:
This somewhat matches the --aa-pipeline option, which separates out any
AA analyses to make sure they run before other passes.
Makes check-llvm failures under new PM go from 2356 -> 2303.
AA passes are not handled by PassBuilder::parsePassPipeline() but rather
PassBuilder::parseAAPipeline(), which is why this fixes some failures.
Reviewers: asbirlea, hans, ychen, leonardchan
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82488
The dependency was introduced in
5134020ea6. The only functional change
from this removal would be the new PM interface for the two codegen
passes. This is not necessary since we don't have codegen pipeline using
new PM yet. This removal is to break the potential circular dependency between
Passes and CodeGen once the codegen begins to gain new PM support.
This class allows to see the inliner's decisions for better
optimization verifications and tests. To use, use flag
"-passes="print<inline-cost>"".
This is the second attempt to integrate the patch.
The problem from the first try has been discussed and
fixed in D82205.
Reviewers: apilipenko, mtrofin, davidxl, fedor.sergeev
Reviewed By: mtrofin
Differential revision: https://reviews.llvm.org/D81743
Summary:
Seems to just be missing from PassRegistry.def.
Makes the number of check-llvm failures under new PM go from 2619 to 2581.
Reviewers: hans, ychen, asbirlea, leonardchan
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82422
Summary:
-simplifycfg is the legacy pass name for SimplifyCFGPass.
There is already -simplify-cfg in FUNCTION_PASS_WITH_PARAMS which
handles options for SimplifyCFGPass. Maybe that should be renamed to
-simplifycfg as well?
This reduces the number of check-llvm failures under NewPM from 2619 to 2392.
Reviewers: hans, leonardchan, asbirlea, ychen
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82421
Summary:
Extend StackLifetime with option to calculate liveliness
where alloca is only considered alive on basic block entry
if all non-dead predecessors had it alive at terminators.
Depends on D82043.
Reviewers: eugenis
Reviewed By: eugenis
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82124
This class allows to see the inliner's decisions for better
optimization verifications and tests. To use, use flag
"-passes="print<inline-cost>"".
Reviewers: apilipenko, mtrofin, davidxl, fedor.sergeev
Reviewed By: mtrofin
Differential revision: https://reviews.llvm.org/D81743
The initial intent was to organize ML stuff in its own directory, but
it turns out that conflicts with llvm component layering policies: it
is not a component, because subsequent changes want to rely on other
analyses, which would create a cycle; and we don't have a reliable,
cross-platform mechanism to compile files in a subdirectory, and fit in
the existing LLVM build structure.
This change moves the files into Analysis, and subsequent changes will
leverage conditional compilation for those that have optional
dependencies.
Summary:
Currently, add_llvm_library would create an OBJECT library alongside
of a STATIC / SHARED library, but losing the link interface (its
elements would become dependencies instead). To support scenarios
where linking an object library also brings in its usage
requirements, this patch adds support for 'stand-alone' OBJECT
libraries - i.e. without an accompanying SHARED/STATIC library, and
maintaining the link interface defined by the user.
The support is via a new option, OBJECT_ONLY, to avoid breaking changes
- since just specifying "OBJECT" would currently imply also STATIC or
SHARED, depending on BUILD_SHARED_LIBS.
This is useful for cases where, for example, we want to build a part
of a component separately. Using a STATIC target would incur the risk
that symbols not referenced in the consumer would be dropped (which may
be undesirable).
The current application is the ML part of Analysis. It should be part
of the Analysis component, so it may reference other analyses; and (in
upcoming changes) it has dependencies on optional libraries.
Reviewers: karies, davidxl
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81447
Summary:
Experiments show that inline deferral past pre-inlining slightly
pessimizes the performance.
This patch introduces an option to control inline deferral during PGO.
The option defaults to true for now (that is, NFC).
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: eraman, hiraditya, haicheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80776
This lets us to remove !stack-safe metadata and
better controll when to perform StackSafety
analysis.
Reviewers: eugenis
Subscribers: hiraditya, steven_wu, dexonsmith, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D80771
Last we looked at this and couldn't come up with a reason to change
it, but with a pragma for full loop unrolling we bypass every other
loop unroll and then fail to fully unroll a loop when the pragma is set.
Move the OnlyWhenForced out of the check and into the initialization
of the full unroll pass in the new pass manager. This doesn't show up
with the old pass manager.
Add a new option to opt so that we can turn off loop unrolling
manually since this is a difference between clang and opt.
Tested with check-clang and check-llvm.
Summary:
This was attempted once before in https://reviews.llvm.org/D79698, but
was reverted due to the coverage pass running in the wrong part of the
pipeline. This commit puts it in the same place as the other sanitizers.
This changes PassBuilder.OptimizerLastEPCallbacks to work on a
ModulePassManager instead of a FunctionPassManager. That is because
SanitizerCoverage cannot (easily) be split into a module pass and a
function pass like some of the other sanitizers since in its current
implementation it conditionally inserts module constructors based on
whether or not it successfully modified functions.
This fixes compiler-rt/test/msan/coverage-levels.cpp under the new pass
manager (last check-msan test).
Currently sanitizers + LTO don't work together under the new pass
manager, so I removed tests that checked that this combination works for
sancov.
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D80692
Summary:
This was attempted once before in https://reviews.llvm.org/D79698, but
was reverted due to the coverage pass running in the wrong part of the
pipeline. This commit puts it in the same place as the other sanitizers.
This changes PassBuilder.OptimizerLastEPCallbacks to work on a
ModulePassManager instead of a FunctionPassManager. That is because
SanitizerCoverage cannot (easily) be split into a module pass and a
function pass like some of the other sanitizers since in its current
implementation it conditionally inserts module constructors based on
whether or not it successfully modified functions.
This fixes compiler-rt/test/msan/coverage-levels.cpp under the new pass
manager (last check-msan test).
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D80692
EarlyCSE was added with D75145, but the motivating test is
not regressed by removing the extra pass now. That might be
because VectorCombine altered the way it processes instructions,
or it might be from (re)moving VectorCombine in the pipeline.
The extra round of EarlyCSE appears to cost approximately
0.26% in compile-time as discussed in D80236, so we need some
evidence to justify its inclusion here, but we do not have
that (yet).
I suspect that between SLP and VectorCombine, we are creating
patterns that InstCombine and/or codegen are not prepared for,
but we will need to reduce those examples and include them as
PhaseOrdering and/or test-suite benchmarks.
There are 2 known problem patterns shown in the test diffs here:
vector horizontal ops (an x86 specialization) and vector reductions.
SLP has greater ability to match and fold those than vector-combine,
so let SLP have first chance at that.
This is a quick fix while we continue to improve vector-combine and
possibly canonicalize to reduction intrinsics.
In the longer term, we should improve matching of these patterns
because if they were created in the "bad" forms shown here, then we
would miss optimizing them.
I'm not sure what is happening with alias analysis on the addsub test.
The old pass manager now shows an extra line for that, and we see an
improvement that comes from SLP vectorizing a store. I don't know
what's missing with the new pass manager to make that happen.
Strangely, I can't reproduce the behavior if I compile from C++ with
clang and invoke the new PM with "-fexperimental-new-pass-manager".
Differential Revision: https://reviews.llvm.org/D80236
Summary:
If an induction variable is frozen and used, SCEV yields imprecise result
because it doesn't say anything about frozen variables.
Due to this reason, performance degradation happened after
https://reviews.llvm.org/D76483 is merged, causing
SCEV yield imprecise result and preventing LSR to optimize a loop.
The suggested solution here is to add a pass which canonicalizes frozen variables
inside a loop. To be specific, it pushes freezes out of the loop by freezing
the initial value and step values instead & dropping nsw/nuw flags from instructions used by freeze.
This solution was also mentioned at https://reviews.llvm.org/D70623 .
Reviewers: spatel, efriedma, lebedev.ri, fhahn, jdoerfert
Reviewed By: fhahn
Subscribers: nikic, mgorny, hiraditya, javed.absar, llvm-commits, sanwou01, nlopes
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77523
Summary:
This change introduces InliningAdvisor (and related APIs), the interface
that abstracts decision making away from the inlining pass. We will use
this interface to delegate decision making to a trained ML model,
subsequently (see referenced RFC).
RFC: http://lists.llvm.org/pipermail/llvm-dev/2020-April/140763.html
Reviewers: davidxl, eraman, dblaikie
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79042
Summary:
As commented in the code, ProfileSummaryAnalysis is required for inliner
pass to query, so this patch moved
RequireAnalysisPass<ProfileSummaryAnalysis> in the recently created
buildInlinerPipeline.
Reviewer: mtrofin, davidxl, tejohnson, dblaikie, jdoerfert, sstefan1
Reviewed By: mtrofin, davidxl, jdoerfert
Subscribers: hiraditya, steven_wu, dexonsmith, wuzish, llvm-commits,
jsji
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D79696
don't span their entire scope.
The previous commit (6d1c40c171) is an older version of the test.
Reviewed By: aprantl, vsk
Differential Revision: https://reviews.llvm.org/D79573
Summary:
This simplifies testing in scenarios where we want to set up module-wide
analyses for inlining. The patch enables treating inlining and its
function cleanups, as a module pass. The alternative would be for tests
to describe the pipeline, which is tedious and adds maintenance
overhead.
Reviewers: davidxl, dblaikie, jdoerfert, sstefan1
Subscribers: hiraditya, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78512
The old command line option `-attributor-disable` was too coarse grained
as we want to measure the effects of the module or cgscc pass without
the other as well.
Since `none` is the default there is no real functional change.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D78571
Summary:
Currently, the internal options -vectorize-loops, -vectorize-slp, and
-interleave-loops do not have much practical effect. This is because
they are used to initialize the corresponding flags in the pass
managers, and those flags are then unconditionally overwritten when
compiling via clang or via LTO from the linkers. The only exception was
-vectorize-loops via opt because of some special hackery there.
While vectorization could still be disabled when compiling via clang,
using -fno-[slp-]vectorize, this meant that there was no way to disable
it when compiling in LTO mode via the linkers. This only affected
ThinLTO, since for regular LTO vectorization is done during the compile
step for scalability reasons. For ThinLTO it is invoked in the LTO
backends. See also the discussion on PR45434.
This patch makes it so the internal options can actually be used to
disable these optimizations. Ultimately, the best long term solution is
to mark the loops with metadata (similar to the approach used to fix
-fno-unroll-loops in D77058), but this enables a shorter term
workaround, and actually makes these internal options useful.
I constant propagated the initial values of these internal flags into
the pass manager flags (for some reasons vectorize-loops and
interleave-loops were initialized to true, while vectorize-slp was
initialized to false). As mentioned above, they are overwritten
unconditionally so this doesn't have any real impact, and these initial
values aren't particularly meaningful.
I then changed the passes to check the internl values and return without
performing the associated optimization when false (I changed the default
of -vectorize-slp to true so the options behave similarly). I was able
to remove the hackery in opt used to get -vectorize-loops=false to work,
as well as a special option there used to disable SLP vectorization.
Finally, I changed thinlto-slp-vectorize-pm.c to:
a) Only test SLP (moved the loop vectorization checking to a new test).
b) Use code that is slp vectorized when it is enabled, and check that
instead of whether the pass is enabled.
c) Test the new behavior of -vectorize-slp.
d) Test both pass managers.
The loop vectorization (and associated interleaving) testing I moved to
a new thinlto-loop-vectorize-pm.c test, with several changes:
a) Changed the flags on the interleaving testing so that it will
actually interleave, and check that.
b) Test the new behavior of -vectorize-loops and -interleave-loops.
c) Test both pass managers.
Reviewers: fhahn, wmi
Subscribers: hiraditya, steven_wu, dexonsmith, cfe-commits, davezarzycki, llvm-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77989
ModuleSummaryAnalysis is the only file in libAnalysis that brings a
dependency on the CodeGen layer from libAnalysis, moving it breaks this
dependency.
Differential Revision: https://reviews.llvm.org/D77994
This pass is created in d6de5f12d4 and tested
for new and legacy pass manager but never added to new pass manager pipeline.
I am adding it to new pass manager pipeline.
This pass is get used in Vector Function Database (VFDatabase) and without
this pass in new pass manager pipeline, none of the vector libraries are work
ing with new pass manager.
Related passes:
66c120f025https://reviews.llvm.org/D74944
Differential revision: https://reviews.llvm.org/D75354
The new and old pass managers (PassManagerBuilder.cpp and
PassBuilder.cpp) are exposed to an `extern` declaration of
`attributor-disable` option which will guard the addition of the
attributor passes to the pass pipelines.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D76871
Summary:
Splitting Knowledge retention into Queries in Analysis and Builder into Transform/Utils
allows Queries and Transform/Utils to use Analysis.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77171
Summary:
CGProfilePass is run by default in certain new pass manager optimization pipeline. Assemblers other than llvm as (such as gnu as) cannot recognize the .cgprofile entries generated and emitted from this pass, causing build time error.
This patch adds new options in clang CodeGenOpts and PassBuilder options so that we can turn cgprofile off when not using integrated assembler.
Reviewers: Bigcheese, xur, george.burgess.iv, chandlerc, manojgupta
Reviewed By: manojgupta
Subscribers: manojgupta, void, hiraditya, dexonsmith, llvm-commits, tcwang, llozano
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D62627
Summary:
Run StackSafetyAnalysis at the end of the IR pipeline and annotate
proven safe allocas with !stack-safe metadata. Do not instrument such
allocas in the AArch64StackTagging pass.
Reviewers: pcc, vitalybuka, ostannard
Reviewed By: vitalybuka
Subscribers: merge_guards_bot, kristof.beyls, hiraditya, cfe-commits, gilang, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73513
Summary:
Assume bundles need to be usable by Analysis and Transforms/Utils isn't.
so this commit moves utilities to deal with asusme bundles to IR.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75618
The initial placement of vector-combine in the opt pipeline revealed phase ordering bugs:
https://bugs.llvm.org/show_bug.cgi?id=45015https://bugs.llvm.org/show_bug.cgi?id=42022
This patch contains a few independent changes:
1. Move the pass up in the pipeline, so it happens just after loop-vectorization.
This is only to keep vectorization passes together in the pipeline at the moment.
I don't have evidence of interaction between these yet.
2. Add an -early-cse pass after -vector-combine to clean up redundant ops. This was
partly proposed as far back as rL219644 (which is why it's effectively being moved
in the old PM code). This is important because the subsequent -instcombine doesn't
work as well without EarlyCSE. With the CSE, -instcombine is able to squash
shuffles together in 1 of the tests (because those are simple "select" shuffles).
3. Remove the -vector-combine pass that was running after SLP. We may want to do that
eventually, but I don't have a test case to support it yet.
Differential Revision: https://reviews.llvm.org/D75145
Summary: This patch adds an analysis pass to collect loop nests and
summarize properties of the nest (e.g the nest depth, whether the nest
is perfect, what's the innermost loop, etc...).
The motivation for this patch was discussed at the latest meeting of the
LLVM loop group (https://ibm.box.com/v/llvm-loop-nest-analysis) where we
discussed
the unimodular loop transformation framework ( “A Loop Transformation
Theory and an Algorithm to Maximize Parallelism”, Michael E. Wolf and
Monica S. Lam, IEEE TPDS, October 1991). The unimodular framework
provides a convenient way to unify legality checking and code generation
for several loop nest transformations (e.g. loop reversal, loop
interchange, loop skewing) and their compositions. Given that the
unimodular framework is applicable to perfect loop nests this is one
property of interest we expose in this analysis. Several other utility
functions are also provided. In the future other properties of interest
can be added in a centralized place.
Authored By: etiotto
Reviewer: Meinersbur, bmahjour, kbarton, Whitney, dmgreen, fhahn,
reames, hfinkel, jdoerfert, ppc-slack
Reviewed By: Meinersbur
Subscribers: bryanpkc, ppc-slack, mgorny, hiraditya, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D68789
Summary: This patch adds an analysis pass to collect loop nests and
summarize properties of the nest (e.g the nest depth, whether the nest
is perfect, what's the innermost loop, etc...).
The motivation for this patch was discussed at the latest meeting of the
LLVM loop group (https://ibm.box.com/v/llvm-loop-nest-analysis) where we
discussed
the unimodular loop transformation framework ( “A Loop Transformation
Theory and an Algorithm to Maximize Parallelism”, Michael E. Wolf and
Monica S. Lam, IEEE TPDS, October 1991). The unimodular framework
provides a convenient way to unify legality checking and code generation
for several loop nest transformations (e.g. loop reversal, loop
interchange, loop skewing) and their compositions. Given that the
unimodular framework is applicable to perfect loop nests this is one
property of interest we expose in this analysis. Several other utility
functions are also provided. In the future other properties of interest
can be added in a centralized place.
Authored By: etiotto
Reviewer: Meinersbur, bmahjour, kbarton, Whitney, dmgreen, fhahn,
reames, hfinkel, jdoerfert, ppc-slack
Reviewed By: Meinersbur
Subscribers: bryanpkc, ppc-slack, mgorny, hiraditya, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D68789
This reverts commit 80d0a137a5, and the
follow on fix in 873c0d0786. It is
causing test failures after a multi-stage clang bootstrap. See
discussion on D73242 and D75201.
Summary:
The IR printing always prints out all functions in a module with the new pass manager, even with -filter-print-funcs specified. This is being fixed in this change. However, there are two exceptions, i.e, with user-specified wildcast switch -filter-print-funcs=* or -print-module-scope, under which IR of all functions should be printed.
Test Plan:
make check-clang
make check-llvm
Reviewers: wenlei
Reviewed By: wenlei
Subscribers: wenlei, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74814
Summary:
Depends on https://reviews.llvm.org/D71901.
The fifth in a series of patches that ports the LLVM coroutines passes
to the new pass manager infrastructure.
The first 4 patches allow users to run coroutine passes by invoking, for
example `opt -passes=coro-early`. However, most of LLVM's tests for
coroutines use an option, `opt -enable-coroutines`, which adds all 4
coroutine passes to the appropriate legacy pass manager extension points.
This patch does the same, but using the new pass manager: when
coroutine features are enabled and the new pass manager is being used,
this adds the new-pass-manager-compliant coroutine passes to the pass
builder's pipeline.
This allows us to run all coroutine tests using the new pass manager
(besides those that use the coroutine retcon ABI used by the Swift
compiler, which is not yet supported in the new pass manager).
Reviewers: GorNishanov, lewissbaker, chandlerc, junparser, wenlei
Subscribers: wenlei, EricWF, Prazek, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71902
Summary:
Depends on https://reviews.llvm.org/D71900.
The fourth in a series of patches that ports the LLVM coroutines passes
to the new pass manager infrastructure. This patch implements
'coro-cleanup'.
No existing regression tests check the behavior of coro-cleanup on its
own, so this patch adds one. (A test named 'coro-cleanup.ll' exists, but
it relies on the entire coroutines pipeline being run. It's updated to
test the new pass manager in the 5th patch of this series.)
Reviewers: GorNishanov, lewissbaker, chandlerc, junparser, deadalnix, wenlei
Reviewed By: wenlei
Subscribers: wenlei, EricWF, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71901
Summary:
Depends on https://reviews.llvm.org/D71899.
The third in a series of patches that ports the LLVM coroutines passes
to the new pass manager infrastructure. This patch implements 'coro-elide'.
The new pass manager infrastructure does not implicitly repeat CGSCC
pass pipelines when a function is devirtualized, and so the tests
for the new pass manager that rely on that behavior now explicitly
specify `repeat<2>`.
Reviewers: GorNishanov, lewissbaker, chandlerc, jdoerfert, junparser, deadalnix, wenlei
Reviewed By: wenlei
Subscribers: wenlei, EricWF, Prazek, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71900
Summary:
This patch has four dependencies:
1. The first in this series of patches that implement coroutine passes in the
new pass manager: https://reviews.llvm.org/D71898.
2. A patch that introduces an API for CGSCC passes to add new reference
edges to a `LazyCallGraph`, `updateCGAndAnalysisManagerForCGSCCPass`:
https://reviews.llvm.org/D72025.
3. A patch that introduces a `CallGraphUpdater` helper class that is
capable of mutating internal `LazyCallGraph` state in order to insert
new function nodes into a specific SCC: https://reviews.llvm.org/D70927.
4. And finally, a small edge case fix for updating `LazyCallGraph` that
patch 3 above happens to run into: https://reviews.llvm.org/D72226.
This is the second in a series of patches that ports the LLVM coroutines
passes to the new pass manager infrastructure. This patch implements
'coro-split'.
Some notes:
* Using the new CGSCC pass manager resulted in IR being printed in the
reverse order in some tests. To prevent FileCheck checks from failing due
to these reversed orders, this patch splits up test files that test
multiple different coroutine functions: specifically
coro-alloc-with-param.ll, coro-split-eh.ll, and coro-eh-aware-edge-split.ll.
* CoroSplit.cpp contained 2 overloads of `splitCoroutine`, one of which
dispatched to the other based on the coroutine ABI being used (C++20
switch-based versus Swift returned-continuation-based). I found this
confusing, especially with the additional branching based on `CallGraph`
vs. `LazyCallGraph`, so I removed the ABI-checking overload of
`splitCoroutine`.
Reviewers: GorNishanov, lewissbaker, chandlerc, jdoerfert, junparser, deadalnix, wenlei
Reviewed By: wenlei
Subscribers: wenlei, qcolombet, EricWF, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71899
Summary:
The first in a series of patches that ports the LLVM coroutines passes
to the new pass manager infrastructure. This patch implements
'coro-early'.
NB: All coroutines passes begin by checking that coroutine intrinsics are
declared within the LLVM IR module they're operating on. To do so, they call
`coro::declaresIntrinsics`. The next 3 patches in this series, which add new
pass manager implementations of the 'coro-split', 'coro-elide', and
'coro-cleanup' passes, use a similar pattern as the one used here: a static
function is shared across both old and new passes to detect if relevant
coroutine intrinsics are delcared. To make this pattern easier to read, this
patch adds `const` keywords to the parameters of `coro::declaresIntrinsics`.
Reviewers: GorNishanov, lewissbaker, junparser, chandlerc, deadalnix, wenlei
Reviewed By: wenlei
Subscribers: ychen, wenlei, EricWF, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71898
This restores commit 748bb5a0f1, along
with a fix for a Chromium test suite build issue (and a new test for
that case).
Differential Revision: https://reviews.llvm.org/D73242
We have several bug reports that could be characterized as "reducing scalarization",
and this topic was also raised on llvm-dev recently:
http://lists.llvm.org/pipermail/llvm-dev/2020-January/138157.html
...so I'm proposing that we deal with these patterns in a new, lightweight IR vector
pass that runs before/after other vectorization passes.
There are 4 alternate options that I can think of to deal with this kind of problem
(and we've seen various attempts at all of these), but they all have flaws:
InstCombine - can't happen without TTI, but we don't want target-specific
folds there.
SDAG - too late to assist other vectorization passes; TLI is not equipped
for these kind of cost queries; limited to a single basic block.
CGP - too late to assist other vectorization passes; would need to re-implement
basic cleanups like CSE/instcombine.
SLP - doesn't fit with existing transforms; limited to a single basic block.
This initial patch/transform is based on existing code in AggressiveInstCombine:
we walk backwards through the function looking for a pattern match. But we diverge
from that cost-independent IR canonicalization pass by using TTI to decide if the
vector alternative is profitable.
We probably have at least 10 similar bug reports/patterns (binops, constants,
inserts, cheap shuffles, etc) that would fit in this pass as follow-up enhancements.
It's possible that we could iterate on a worklist to fix-point like InstCombine does,
but it's safer to start with a most basic case and evolve from there, so I didn't
try to do anything fancy with this initial implementation.
Differential Revision: https://reviews.llvm.org/D73480
In addition to the module pass, this patch introduces a CGSCC pass that
runs the Attributor on a strongly connected component of the call graph
(both old and new PM). The Attributor was always design to be used on a
subset of functions which makes this patch mostly mechanical.
The one change is that we give up `norecurse` deduction in the module
pass in favor of doing it during the CGSCC pass. This makes the
interfaces simpler but can be revisited if needed.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D70767
The OpenMPOpt pass is a CGSCC pass in which OpenMP specific
optimizations can reside.
The OpenMPOpt pass uses the OpenMPKinds.def file to identify runtime
calls and their uses. This allows targeted transformations and eases
their implementation.
This initial patch deduplicates `__kmpc_global_thread_num` and
`omp_get_thread_num` calls. We can also identify arguments that are
equivalent to such a call result and use it instead. Later we can
determine "gtid" arguments based on the use in kernel functions etc.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D69930
Summary:
Currently type test assume sequences inserted for devirtualization are
removed during WPD. This patch delays their removal until later in the
optimization pipeline. This is an enabler for upcoming enhancements to
indirect call promotion, for example streamlined promotion guard
sequences that compare against vtable address instead of the target
function, when there are small number of possible vtables (either
determined via WPD or by in-progress type profiling). We need the type
tests to correlate the callsites with the address point offset needed in
the compare sequence, and optionally to associated type summary info
computed during WPD.
This depends on work in D71913 to enable invocation of LowerTypeTests to
drop type test assume sequences, which will now be invoked following ICP
in the ThinLTO post-LTO link pipelines, and also after the existing
export phase LowerTypeTests invocation in regular LTO (which is already
after ICP). We cannot simply move the existing import phase
LowerTypeTests pass later in the ThinLTO post link pipelines, as the
comment in PassBuilder.cpp notes (it must run early because when
performing CFI other passes may disturb the sequences it looks for).
This necessitated adding a new type test resolution "Unknown" that we
can use on the type test assume sequences previously removed by WPD,
that we now want LTT to ignore.
Depends on D71913.
Reviewers: pcc, evgeny777
Subscribers: mehdi_amini, Prazek, hiraditya, steven_wu, dexonsmith, arphaman, davidxl, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73242
Fix attempt
this is part of the implementation of http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
this patch gives the basis of building an assume to preserve all information from an instruction and add support for building an assume that preserve the information from a call.
Summary:
this is part of the implementation of http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
this patch gives the basis of building an assume to preserve all information from an instruction and add support for building an assume that preserve the information from a call.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: mgrang, fhahn, mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72475
Summary:
this is part of the implementation of http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
this patch gives the basis of building an assume to preserve all information from an instruction and add support for building an assume that preserve the information from a call.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: mgrang, fhahn, mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72475
Summary:
this is part of the implementation of http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
this patch gives the basis of building an assume to preserve all information from an instruction and add support for building an assume that preserve the information from a call.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: mgrang, fhahn, mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72475
Summary:
this is part of the implementation of http://lists.llvm.org/pipermail/llvm-dev/2019-December/137632.html
this patch gives the basis of building an assume to preserve all information from an instruction and add support for building an assume that preserve the information from a call.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: mgrang, fhahn, mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72475
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Introduce parsing, add a few instances of parameter use into GVN-PRE tests.
Reviewers: skatkov, asbirlea
Reviewed By: skatkov
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72752
Summary:
The old pass manager separated speed optimization and size optimization
levels into two unsigned values. Coallescing both in an enum in the new
pass manager may lead to unintentional casts and comparisons.
In particular, taking a look at how the loop unroll passes were constructed
previously, the Os/Oz are now (==new pass manager) treated just like O3,
likely unintentionally.
This change disallows raw comparisons between optimization levels, to
avoid such unintended effects. As an effect, the O{s|z} behavior changes
for loop unrolling and loop unroll and jam, matching O2 rather than O3.
The change also parameterizes the threshold values used for loop
unrolling, primarily to aid testing.
Reviewers: tejohnson, davidxl
Reviewed By: tejohnson
Subscribers: zzheng, ychen, mehdi_amini, hiraditya, steven_wu, dexonsmith, dang, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72547
This ports the MergeFunctions pass to the NewPM. This was rather
straightforward, as no analyses are used.
Additionally MergeFunctions needs to be conditionally enabled in
the PassBuilder, but I left that part out of this patch.
Differential Revision: https://reviews.llvm.org/D72537
Summary:
This patch makes it easy to try out different preinlining thresholds
with a command-line switch just like -preinline-threshold for the
legacy pass manager.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72618
down to pass builder in ltobackend.
Currently CodeGenOpts like UnrollLoops/VectorizeLoop/VectorizeSLP in clang
are not passed down to pass builder in ltobackend when new pass manager is
used. This is inconsistent with the behavior when new pass manager is used
and thinlto is not used. Such inconsistency causes slp vectorization pass
not being enabled in ltobackend for O3 + thinlto right now. This patch
fixes that.
Differential Revision: https://reviews.llvm.org/D72386
pass.
Summary: This patch changes LoopUnrollAndJamPass to a function pass, and
keeps the loops traversal order same as defined in
FunctionToLoopPassAdaptor LoopPassManager.h.
The next patch will change the loop traversal to outer to inner order,
so more loops can be transform.
Discussion in llvm-dev mailing list:
https://groups.google.com/forum/#!topic/llvm-dev/LF4rUjkVI2g
Reviewer: dmgreen, jdoerfert, Meinersbur, kbarton, bmahjour, etiotto
Reviewed By: dmgreen
Subscribers: hiraditya, zzheng, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D72230
This is the first patch adding an initial set of matrix intrinsics and a
corresponding lowering pass. This has been discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2019-October/136240.html
The first patch introduces four new intrinsics (transpose, multiply,
columnwise load and store) and a LowerMatrixIntrinsics pass, that
lowers those intrinsics to vector operations.
Matrixes are embedded in a 'flat' vector (e.g. a 4 x 4 float matrix
embedded in a <16 x float> vector) and the intrinsics take the dimension
information as parameters. Those parameters need to be ConstantInt.
For the memory layout, we initially assume column-major, but in the RFC
we also described how to extend the intrinsics to support row-major as
well.
For the initial lowering, we split the input of the intrinsics into a
set of column vectors, transform those column vectors and concatenate
the result columns to a flat result vector.
This allows us to lower the intrinsics without any shape propagation, as
mentioned in the RFC. In follow-up patches, we plan to submit the
following improvements:
* Shape propagation to eliminate the embedding/splitting for each
intrinsic.
* Fused & tiled lowering of multiply and other operations.
* Optimization remarks highlighting matrix expressions and costs.
* Generate loops for operations on large matrixes.
* More general block processing for operation on large vectors,
exploiting shape information.
We would like to add dedicated transpose, columnwise load and store
intrinsics, even though they are not strictly necessary. For example, we
could instead emit a large shufflevector instruction instead of the
transpose. But we expect that to
(1) become unwieldy for larger matrixes (even for 16x16 matrixes,
the resulting shufflevector masks would be huge),
(2) risk instcombine making small changes, causing us to fail to
detect the transpose, preventing better lowerings
For the load/store, we are additionally planning on exploiting the
intrinsics for better alias analysis.
Reviewers: anemet, Gerolf, reames, hfinkel, andrew.w.kaylor, efriedma, rengolin
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D70456
New pass manager doesn't use verifyAnalysis, so currently there is no
way to call SCEV verification from command line when new PM is used.
This patch adds a pass that allows you to do that.
Reviewers: reames, fhahn, sanjoy.google, nikic
Reviewed By: fhahn
Subscribers: hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70423
This reapplies: 8ff85ed905
Original commit message:
As a follow-up to my initial mail to llvm-dev here's a first pass at the O1 described there.
This change doesn't include any change to move from selection dag to fast isel
and that will come with other numbers that should help inform that decision.
There also haven't been any real debuggability studies with this pipeline yet,
this is just the initial start done so that people could see it and we could start
tweaking after.
Test updates: Outside of the newpm tests most of the updates are coming from either
optimization passes not run anymore (and without a compelling argument at the moment)
that were largely used for canonicalization in clang.
Original post:
http://lists.llvm.org/pipermail/llvm-dev/2019-April/131494.html
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65410
This reverts commit c9ddb02659.
This change doesn't include any change to move from selection dag to fast isel
and that will come with other numbers that should help inform that decision.
There also haven't been any real debuggability studies with this pipeline yet,
this is just the initial start done so that people could see it and we could start
tweaking after.
Test updates: Outside of the newpm tests most of the updates are coming from either
optimization passes not run anymore (and without a compelling argument at the moment)
that were largely used for canonicalization in clang.
Original post:
http://lists.llvm.org/pipermail/llvm-dev/2019-April/131494.html
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65410
Summary:
Most libraries are defined in the lib/ directory but there are also a
few libraries defined in tools/ e.g. libLLVM, libLTO. I'm defining
"Component Libraries" as libraries defined in lib/ that may be included in
libLLVM.so. Explicitly marking the libraries in lib/ as component
libraries allows us to remove some fragile checks that attempt to
differentiate between lib/ libraries and tools/ libraires:
1. In tools/llvm-shlib, because
llvm_map_components_to_libnames(LIB_NAMES "all") returned a list of
all libraries defined in the whole project, there was custom code
needed to filter out libraries defined in tools/, none of which should
be included in libLLVM.so. This code assumed that any library
defined as static was from lib/ and everything else should be
excluded.
With this change, llvm_map_components_to_libnames(LIB_NAMES, "all")
only returns libraries that have been added to the LLVM_COMPONENT_LIBS
global cmake property, so this custom filtering logic can be removed.
Doing this also fixes the build with BUILD_SHARED_LIBS=ON
and LLVM_BUILD_LLVM_DYLIB=ON.
2. There was some code in llvm_add_library that assumed that
libraries defined in lib/ would not have LLVM_LINK_COMPONENTS or
ARG_LINK_COMPONENTS set. This is only true because libraries
defined lib lib/ use LLVMBuild.txt and don't set these values.
This code has been fixed now to check if the library has been
explicitly marked as a component library, which should now make it
easier to remove LLVMBuild at some point in the future.
I have tested this patch on Windows, MacOS and Linux with release builds
and the following combinations of CMake options:
- "" (No options)
- -DLLVM_BUILD_LLVM_DYLIB=ON
- -DLLVM_LINK_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_BUILD_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_LINK_LLVM_DYLIB=ON
Reviewers: beanz, smeenai, compnerd, phosek
Reviewed By: beanz
Subscribers: wuzish, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, mgorny, mehdi_amini, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, steven_wu, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, dang, Jim, lenary, s.egerton, pzheng, sameer.abuasal, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70179
This patch introduces a function pass to inject the scalar-to-vector
mappings stored in the TargetLIbraryInfo (TLI) into the Vector
Function ABI (VFABI) variants attribute.
The test is testing the injection for three vector libraries supported
by the TLI (Accelerate, SVML, MASSV).
The pass does not change any of the analysis associated to the
function.
Differential Revision: https://reviews.llvm.org/D70107
If there is a small local array accessed in a loop, SROA can't handle memory
accesses with variant offset inside a loop, after the loop is fully unrolled,
all memory accesses to the array are with fixed offset, so now they can be
processed by SROA. But there is no more SROA passes after loop unroll. This
patch add an SROA pass after loop unroll to handle this pattern.
Differential Revision: https://reviews.llvm.org/D68593
we will unroll loops. Also comment a few occasions where we need to
know whether or not we're forcing the unwinder or not.
The default before and after this patch is for LoopUnroll to be enabled,
and for it to use a cost model to determine whether to unroll the loop
(`OnlyWhenForced = false`). Before this patch, disabling loop unroll
would not run the LoopUnroll pass. After this patch, the LoopUnroll pass
is being run, but it restricts unrolling to only the loops marked by a
pragma (`OnlyWhenForced = true`).
In addition, this patch disables the UnrollAndJam pass when disabling unrolling.
Testcase is in clang because it's controlling how the loop optimizer
is being set up and there's no other way to trigger the behavior.
llvm-svn: 374838
Add a pass to lower is.constant and objectsize intrinsics
This pass lowers is.constant and objectsize intrinsics not simplified by
earlier constant folding, i.e. if the object given is not constant or if
not using the optimized pass chain. The result is recursively simplified
and constant conditionals are pruned, so that dead blocks are removed
even for -O0. This allows inline asm blocks with operand constraints to
work all the time.
The new pass replaces the existing lowering in the codegen-prepare pass
and fallbacks in SDAG/GlobalISEL and FastISel. The latter now assert
on the intrinsics.
Differential Revision: https://reviews.llvm.org/D65280
llvm-svn: 374784
This pass lowers is.constant and objectsize intrinsics not simplified by
earlier constant folding, i.e. if the object given is not constant or if
not using the optimized pass chain. The result is recursively simplified
and constant conditionals are pruned, so that dead blocks are removed
even for -O0. This allows inline asm blocks with operand constraints to
work all the time.
The new pass replaces the existing lowering in the codegen-prepare pass
and fallbacks in SDAG/GlobalISEL and FastISel. The latter now assert
on the intrinsics.
Differential Revision: https://reviews.llvm.org/D65280
llvm-svn: 374743
Summary:
If we insert them from function pass some analysis may be missing or invalid.
Fixes PR42877.
Reviewers: eugenis, leonardchan
Reviewed By: leonardchan
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D68832
> llvm-svn: 374481
Signed-off-by: Vitaly Buka <vitalybuka@google.com>
llvm-svn: 374527
Summary:
If we insert them from function pass some analysis may be missing or invalid.
Fixes PR42877.
Reviewers: eugenis, leonardchan
Reviewed By: leonardchan
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D68832
llvm-svn: 374481
Existing clients are converted to use MachineModuleInfoWrapperPass. The
new interface is for defining a new pass manager API in CodeGen.
Reviewers: fedor.sergeev, philip.pfaffe, chandlerc, arsenm
Reviewed By: arsenm, fedor.sergeev
Differential Revision: https://reviews.llvm.org/D64183
llvm-svn: 373240
Summary:
The Regex "match" and "sub" member functions were previously not "const"
because they wrote to the "error" member variable. This commit removes
those assignments, and instead assumes that the validity of the regex
is already known after the initial compilation of the regular
expression. As a result, these member functions were possible to make
"const". This makes it easier to do things like pre-compile Regexes
up-front, and makes "match" and "sub" thread-safe. The error status is
now returned as an optional output, which also makes the API of "match"
and "sub" more consistent with each other.
Also, some uses of Regex that could be refactored to be const were made const.
Patch by Nicolas Guillemot
Reviewers: jankratochvil, thopre
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67241
llvm-svn: 372764
Add an ability to specify the max full unroll count for LoopUnrollPass pass
in pass options.
Reviewers: fhahn, fedor.sergeev
Reviewed By: fedor.sergeev
Subscribers: hiraditya, zzheng, dmgreen, llvm-commits
Differential Revision: https://reviews.llvm.org/D67701
llvm-svn: 372305
Summary:
This is the first patch in a series of patches that will implement data dependence graph in LLVM. Many of the ideas used in this implementation are based on the following paper:
D. J. Kuck, R. H. Kuhn, D. A. Padua, B. Leasure, and M. Wolfe (1981). DEPENDENCE GRAPHS AND COMPILER OPTIMIZATIONS.
This patch contains support for a basic DDGs containing only atomic nodes (one node for each instruction). The edges are two fold: def-use edges and memory-dependence edges.
The implementation takes a list of basic-blocks and only considers dependencies among instructions in those basic blocks. Any dependencies coming into or going out of instructions that do not belong to those basic blocks are ignored.
The algorithm for building the graph involves the following steps in order:
1. For each instruction in the range of basic blocks to consider, create an atomic node in the resulting graph.
2. For each node in the graph establish def-use edges to/from other nodes in the graph.
3. For each pair of nodes containing memory instruction(s) create memory edges between them. This part of the algorithm goes through the instructions in lexicographical order and creates edges in reverse order if the sink of the dependence occurs before the source of it.
Authored By: bmahjour
Reviewer: Meinersbur, fhahn, myhsu, xtian, dmgreen, kbarton, jdoerfert
Reviewed By: Meinersbur, fhahn, myhsu
Subscribers: ychen, arphaman, simoll, a.elovikov, mgorny, hiraditya, jfb, wuzish, llvm-commits, jsji, Whitney, etiotto
Tag: #llvm
Differential Revision: https://reviews.llvm.org/D65350
llvm-svn: 372238
Ta-Wei Tu