Summary:
This patch enhances SLSR to handle another candidate form &B[i * S]. If
we found two candidates
S1: X = &B[i * S]
S2: Y = &B[i' * S]
and S1 dominates S2, we can replace S2 with
Y = &X[(i' - i) * S]
Test Plan:
slsr-gep.ll
X86/no-slsr.ll: verify that we do not run SLSR on GEPs that already fit into
an addressing mode
Reviewers: eliben, atrick, meheff, hfinkel
Reviewed By: hfinkel
Subscribers: sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D7459
llvm-svn: 233286
Tests derive from TestBase, which derives from Base. In the
test setUp() methods, we always call TestBase.setUp() first and
then call implementation-specific setup. Tear down needs to do
the reverse.
This was causing over 20 failures on Windows, and was the culprit
behind about 80% of the files not being cleaned up after test run.
TestBase.tearDown() is responsible for deleting all targets created
during the test run and without this step, on Windows files will
be locked and cannot be deleted. But TestBase.tearDown() was
calling Base.tearDown() before its own cleanup (i.e. deleting the
targets) and in some cases one of the teardown hooks would be to
call make clean. So make clean would be run before the targets
had been deleted, and fail to remove the files, and subsequently
result in a failed test as well.
llvm-svn: 233284
This diff includes implementation of linking calls to ifunc functions.
It provides ifunc entries in PLT and corresponding relocations (R_ARM_ALU_PC_G0_NC,
R_ARM_ALU_PC_G1_NC, R_ARM_LDR_PC_G2 for link-time and R_ARM_IRELATIVE for run-time).
Differential Revision: http://reviews.llvm.org/D7833
llvm-svn: 233277
The idea behind Nuxi CloudABI is that it is targeted at (but not limited to)
running networked services in a sandboxed environment. The model behind stdin,
stdout and stderr is strongly focused on interactive tools in a command shell.
CloudABI does not support the notion of stdin and stdout, as 'standard
input/output' does not apply to services. The concept of stderr does makes
sense though, as services do need some mechanism to log error messages in a
uniform way.
This patch extends libc++ in such a way that std::cin and std::cout and the
associated <cstdio>/<cwchar> functions can be disabled through the flags
_LIBCPP_HAS_NO_STDIN and _LIBCPP_HAS_NO_STDOUT, respectively. At the same time
it attempts to clean up src/iostream.cpp a bit. Instead of using a single array
of mbstate_t objects and hardcoding the array indices, it creates separate
objects that declared next to the iostream objects and their buffers. The code
is also restructured by interleaving the construction and setup of c* and wc*
objects. That way it is more obvious that this is done identically.
The c* and wc* objects already have separate unit tests. Make use of this fact
by adding XFAILs in case libcpp-has-no-std* is set. That way the tests work in
both directions. If stdin or stdout is disabled, these tests will therefore
test for the absence of c* and wc*.
Differential Revision: http://reviews.llvm.org/D8340
llvm-svn: 233275
If we want to add support for making std::cin and std::cout optional, it
is impractical to have all of the mbstate_t objects in one array. This
would mean that if std::cin and std::cout are omitted, the state_types
array is only used partially.
Solve this by using separate global variables. These are placed right
next to the iostream object and the buffer, meaning we can easily #ifdef
them away.
Differential Revision: http://reviews.llvm.org/D8359
llvm-svn: 233274
This patch fixes the following:
```
1: test_attach_to_process_by_id_with_dsym (TestProcessAttach.ProcessAttachTestCase)
Test attach by process id ... ok
2: test_attach_to_process_by_id_with_dwarf (TestProcessAttach.ProcessAttachTestCase)
Test attach by process id ... ok
3: test_attach_to_process_by_name_with_dsym (TestProcessAttach.ProcessAttachTestCase)
Test attach by process name ... FAILURE
4: test_attach_to_process_by_name_with_dwarf (TestProcessAttach.ProcessAttachTestCase)
Test attach by process name ... FAILURE
======================================================================
FAIL: test_attach_to_process_by_name_with_dsym (TestProcessAttach.ProcessAttachTestCase)
Test attach by process name
----------------------------------------------------------------------
Traceback (most recent call last):
File "/Users/IliaK/p/llvm/tools/lldb/test/lldbtest.py", line 462, in wrapper
return func(self, *args, **kwargs)
File "/Users/IliaK/p/llvm/tools/lldb/test/functionalities/process_attach/TestProcessAttach.py", line 35, in test_attach_to_process_by_name_with_dsym
self.process_attach_by_name()
File "/Users/IliaK/p/llvm/tools/lldb/test/functionalities/process_attach/TestProcessAttach.py", line 79, in process_attach_by_name
self.runCmd("process attach -n s" + exe_name)
File "/Users/IliaK/p/llvm/tools/lldb/test/lldbtest.py", line 2008, in runCmd
msg if msg else CMD_MSG(cmd))
AssertionError: False is not True : Command 'process attach -n sProcessAttach' returns successfully
Config=x86_64-clang
======================================================================
FAIL: test_attach_to_process_by_name_with_dwarf (TestProcessAttach.ProcessAttachTestCase)
Test attach by process name
----------------------------------------------------------------------
Traceback (most recent call last):
File "/Users/IliaK/p/llvm/tools/lldb/test/lldbtest.py", line 479, in wrapper
return func(self, *args, **kwargs)
File "/Users/IliaK/p/llvm/tools/lldb/test/functionalities/process_attach/TestProcessAttach.py", line 41, in test_attach_to_process_by_name_with_dwarf
self.process_attach_by_name()
File "/Users/IliaK/p/llvm/tools/lldb/test/functionalities/process_attach/TestProcessAttach.py", line 79, in process_attach_by_name
self.runCmd("process attach -n s" + exe_name)
File "/Users/IliaK/p/llvm/tools/lldb/test/lldbtest.py", line 2008, in runCmd
msg if msg else CMD_MSG(cmd))
AssertionError: False is not True : Command 'process attach -n sProcessAttach' returns successfully
Config=x86_64-clang
----------------------------------------------------------------------
```
Failure-x86_64-clang-TestProcessAttach.ProcessAttachTestCase.test_attach_to_process_by_name_with_dsym.log:
```
[...]
runCmd: process attach -n ProcessAttach
runCmd failed!
error: attach failed: more than one process named ProcessAttach:
PID PARENT USER TRIPLE ARGUMENTS
====== ====== ========== ======================== ============================
43752 43680 IliaK x86_64-apple-macosx /Users/IliaK/p/llvm/tools/lldb/test/functionalities/process_attach/ProcessAttach
43663 1 IliaK x86_64-apple-macosx /Users/IliaK/p/llvm/tools/lldb/test/functionalities/process_attach/ProcessAttach
[...]
```
llvm-svn: 233272
Summary: This groups all of the MipsAssemblerOptions functionality together, making it more reader-friendly.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8445
llvm-svn: 233271
This patch teaches fast-isel how to select 128-bit vector load instructions.
Added test CodeGen/X86/fast-isel-vecload.ll
Differential Revision: http://reviews.llvm.org/D8605
llvm-svn: 233270
Now that CloudABI's target information and header search logic for Clang
has been submitted, the only thing that remains to be done is adding
support for CloudABI's linker.
CloudABI uses Binutils ld, although there is some work to use lld
instead. This means that this code is largely based on what we use on
FreeBSD. There are some exceptions, however:
- Only static linking is performed. CloudABI does not support any
dynamically linked executables.
- CloudABI uses compiler-rt, libc++ and libc++abi unconditionally. Link
in these libraries instead of using libgcc_s, libstdc++, etc.
- We must ensure that the .eh_frame_hdr is present to make C++
exceptions work properly.
Differential Revision: http://reviews.llvm.org/D8250
llvm-svn: 233269
Clang was inserting these into a dense map. While it never iterated the
dense map during normal compilation, it did when emitting a module. Fix
this by using a standard MapVector to preserve the order in which we
encounter the late parsed templates.
I suspect this still isn't ideal, as we don't seem to remove things from
this map even when we mark the templates as no longer late parsed. But
I don't know enough about this particular extension to craft a nice,
subtle test case covering this. I've managed to get the stress test to
at least do some late parsing and demonstrate the core problem here.
This patch fixes the test and provides deterministic behavior which is
a strict improvement over the prior state.
I've cleaned up some of the code here as well to be explicit about
inserting when that is what is actually going on.
llvm-svn: 233264
templates. Turns out all of this works correctly (so far). But it should
cover more code paths and will let me test some things that don't
actually work next.
llvm-svn: 233263
The time_put test doesn't seem to work on Linux and CloudABI. For Linux
we already have an XFAIL. Closer inspection seems to reveal that this
test does not pass for a couple of reasons.
First of all, the tm_yday field is set to an invalid value. The
strftime() function doesn't behave consistently across platforms in case
the values in the tm structure are incoherent. Fix up this field to have
the value 121, which corresponds with tm_mday, tm_mon and tm_year. This
of course affects the output of time_put for some modifiers, so update
the tests accordingly.
Second, some of the tests actually use modifiers that are only present
on BSD derived systems. They are not part of the C standard/POSIX.
Simply remove them.
Finally, some of the tests actually use invalid modifiers, causing a
malformed format string to be passed to strftime(). Remove these tests
as well.
Differential Revision: http://reviews.llvm.org/D8349
llvm-svn: 233262
deterministically.
This fixes a latent issue where even Clang's Sema (and diagnostics) were
non-deterministic in the face of this pragma. The fix is super simple --
just use a MapVector so we track the order in which these are parsed (or
imported). Especially considering how rare they are, this seems like the
perfect tradeoff. I've also simplified the client code with judicious
use of auto and range based for loops.
I've added some pretty hilarious code to my stress test which now
survives the binary diff without issue.
llvm-svn: 233261
Mapping symbols should have their own code models,
and in some places must be treated in a specific way.
Make $t denote Thumb code, and $a and $d denote ARM code.
Set size, binding and type of mapping symbols to what the specification says.
Differential Revision: http://reviews.llvm.org/D8601
llvm-svn: 233259
It was happening when we looked up a PC for a module that was dlopen'ed/dlclose'd
after the last time we fetched the list of modules
Reviewed at http://reviews.llvm.org/D8618
llvm-svn: 233257
Summary:
This patch fixes -gdb-exit for locally target. It includes the following changes:
# Fix Process::Finalize
# Use SBProcess::Destroy in -gdb-exit
Reviewers: abidh, zturner, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, clayborg, abidh
Differential Revision: http://reviews.llvm.org/D8298
llvm-svn: 233255
updated decl contexts get emitted.
Since this code was added, we have newer vastly simpler code for
handling this. The code I'm removing was very expensive and also
generated unstable order of declarations which made module outputs
non-deterministic.
All of the tests continue to pass for me and I'm able to check the
difference between the .pcm files after merging modules together.
llvm-svn: 233251
non-visible definition, skip the new definition and make the old one visible
instead of trying to parse it again and failing horribly. C++'s ODR allows
us to assume that the two definitions are identical.
llvm-svn: 233250
decl context lookup tables.
The first attepmt at this caused problems. We had significantly more
sources of non-determinism that I realized at first, and my change
essentially turned them from non-deterministic output into
use-after-free. Except that they weren't necessarily caught by tools
because the data wasn't really freed.
The new approach is much simpler. The first big simplification is to
inline the "visit" code and handle this directly. That works much
better, and I'll try to go and clean up the other caller of the visit
logic similarly.
The second key to the entire approach is that we need to *only* collect
names into a stable order at first. We then need to issue all of the
actual 'lookup()' calls in the stable order of the names so that we load
external results in a stable order. Once we have loaded all the results,
the table of results will stop being invalidated and we can walk all of
the names again and use the cheap 'noload_lookup()' method to quickly
get the results and serialize them.
To handle constructors and conversion functions (whose names can't be
stably ordered) in this approach, what we do is record only the visible
constructor and conversion function names at first. Then, if we have
any, we walk the decls of the class and add those names in the order
they occur in the AST. The rest falls out naturally.
This actually ends up simpler than the previous approach and seems much
more robust.
It uncovered a latent issue where we were building on-disk hash tables
for lookup results when the context was a linkage spec! This happened to
dodge all of the assert by some miracle. Instead, add a proper predicate
to the DeclContext class and use that which tests both for function
contexts and linkage specs.
It also uncovered PR23030 where we are forming somewhat bizarre negative
lookup results. I've just worked around this with a FIXME in place
because fixing this particular Clang bug seems quite hard.
I've flipped the first part of the test case I added for stability back
on in this commit. I'm taking it gradually to try and make sure the
build bots are happy this time.
llvm-svn: 233249
This patch defines implicit conversion between integers and PowerOf2
instances, so uses of the classes is now implicit and look like
regular integers. Now we are ready to remove the scaffolding.
llvm-svn: 233245
The new constructor's type is the same, but this one takes not a log2
value but an alignment value itself, so the meaning is totally differnet.
llvm-svn: 233244