To do this while supporting the existing functionality in SelectionDAG of using
PGO info, we add the ProfileSummaryInfo and LazyBlockFrequencyInfo analysis
dependencies to the instruction selector pass.
Then, use the predicate to generate constant pool loads for f32 materialization,
if we're targeting optsize/minsize.
Differential Revision: https://reviews.llvm.org/D97732
I copied the nearly identical function from AArch64 into AMDGPU, so
fix this duplication.
Mips and X86 have their own more exotic versions which should be
removed. However replacing those is better left for a separate patch
since it requires other changes to avoid regressions.
This change introduces support for zero flag ELF section groups to LLVM.
LLVM already supports COMDAT sections, which in ELF are a special type
of ELF section groups. These are generally useful to enable linker GC
where you want a group of sections to always travel together, that is to
be either retained or discarded as a whole, but without the COMDAT
semantics. Other ELF assemblers already support zero flag ELF section
groups and this change helps us reach feature parity.
Differential Revision: https://reviews.llvm.org/D95851
As mentioned in TODO comment, casting double to float causes NaNs to change bits.
To avoid the change, this patch adds support for single-floating-point immediate value on MachineCode.
Patch by Yuta Saito.
Differential Revision: https://reviews.llvm.org/D77384
A couple patterns used bitconvert on the immAllOnesV, but
the isel matching uses ISD::isBuildVectorAllOnes which
is able to look through bitcasts. So isel patterns don't need
to do it explicitly.
Various *TargetStreamer.h need formatted_raw_ostream but rely on a
forward declaration of formatted_raw_ostream in MCStreamer.h. This
patch adds forward declarations right in *TargetStreamer.h.
While we are at it, this patch removes the one in MCStreamer.h, where
it is unnecessary.
In MipsDelaySlotFiller, when replacing old call-branch with
the compact branch instruction, an assertion is caused by erasing
the old call with unhandled CSInfo.
The problem was reported in PR48695.
This patch fixes it, by moving call site info from the old call
instruction to its replace.
Patch by Nikola Tesic
Differential revision: https://reviews.llvm.org/D94685
This fixes double printing of insertion debug messages in the
legalizer.
Try to cleanup usage of observers. Currently the use of observers is
pretty hard to follow and it's not clear what is responsible for
them. Observers are referenced in 3 places:
1. In the MachineFunction
2. In the MachineIRBuilder
3. In the LegalizerHelper
The observers in the MachineFunction and MachineIRBuilder are both
called only on insertions, and are redundant with each other. The
source of the double printing was the same observer was added to both
the MachineFunction, and the MachineIRBuilder. One of these references
needs to be removed. Arguably observers in general should be fully
removed from one or the other, but it may be useful to have a local
observer in the MachineIRBuilder that is not added to the function's
observers. Alternatively, the wrapper observer could manage a local
observer in one place.
The LegalizerHelper only ever calls the observer on changing/changed
instructions, and never insertions. Logically these are two different
types of observers, for changes and for insertions.
Additionally, some places used the GISelObserverWrapper when they only
needed a single observer they could use directly.
Setting the observer in the LegalizerHelper constructor is not
flexible enough if the LegalizerHelper is constructed anywhere outside
the one used by the legalizer. AMDGPU calls the LegalizerHelper in
RegBankSelect, and needs to use a local observer to apply the regbank
to newly created instructions. Currently it accomplishes this by
constructing a local MachineIRBuilder. I'm trying to move the
MachineIRBuilder to be owned/maintained by the RegBankSelect pass
itself, but the locally constructed LegalizerHelper would reset the
observer.
Mips also has a special case use of the LegalizationArtifactCombiner
in applyMappingImpl; I think we do need to run the artifact combiner
during RegBankSelect, but in a more consistent way outside of
applyMappingImpl.
If the return values can't be lowered to registers
SelectionDAG performs the sret demotion. This patch
contains the basic implementation for the same in
the GlobalISel pipeline.
Furthermore, targets should bring relevant changes
during lowerFormalArguments, lowerReturn and
lowerCall to make use of this feature.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D92953
Current implementation assumes that, each MachineConstantPoolValue takes
up sizeof(MachineConstantPoolValue::Ty) bytes. For PowerPC, we want to
lump all the constants with the same type as one MachineConstantPoolValue
to save the cost that calculate the TOC entry for each const. So, we need
to extend the MachineConstantPoolValue that break this assumption.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D89108
The default version only works if the returned node has a single
result. The X86 and PowerPC versions support multiple results
and allow a single result to be returned from a node with
multiple outputs. And allow a single result that is not result 0
of the node.
Also replace the Mips version since the new version should work
for it. The original version handled multiple results, but only
if the new node and original node had the same number of results.
Differential Revision: https://reviews.llvm.org/D91846
This patch factors out the part of printInstruction that gets the
mnemonic string for a given MCInst. This is intended to be used
subsequently for the instruction-mix remarks to display the final
mnemonic (D90040).
Unfortunately making `getMnemonic` available to the AsmPrinter
seems to require making it virtual. Not sure if there's a way around
that with the current layering of the AsmPrinters.
Reviewed By: Paul-C-Anagnostopoulos
Differential Revision: https://reviews.llvm.org/D90039
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
To accommodate frame layouts that have both fixed and scalable objects
on the stack, describing a stack location or offset using a pointer + uint64_t
is not sufficient. For this reason, we've introduced the StackOffset class,
which models both the fixed- and scalable sized offsets.
The TargetFrameLowering::getFrameIndexReference is made to return a StackOffset,
so that this can be used in other interfaces, such as to eliminate frame indices
in PEI or to emit Debug locations for variables on the stack.
This patch is purely mechanical and doesn't change the behaviour of how
the result of this function is used for fixed-sized offsets. The patch adds
various checks to assert that the offset has no scalable component, as frame
offsets with a scalable component are not yet supported in various places.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D90018
In most of lib/Target we know that we are not dealing with scalable
types so it's perfectly fine to replace TypeSize comparison operators
with their fixed width equivalents, making use of getFixedSize()
and so on.
Differential Revision: https://reviews.llvm.org/D89101
The versions that take 'unsigned' will be removed in the future.
I tried to use getOriginalAlign instead of getAlign in some
places. getAlign factors in the minimum alignment implied by
the offset in the pointer info. Since we're also passing the
pointer info we can use the original alignment.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D87592
We weren't using this before, so none of the MachineFunction CFG edges had the
branch probability information added. As a result, block placement later in the
pipeline was flying blind.
This is enabled only with optimizations enabled like SelectionDAG.
Differential Revision: https://reviews.llvm.org/D86824
Reduce to forward declaration, add the Register.h include that we still needed, move CCState::ensureMaxAlignment into CallingConvLower.cpp as it was the only function that needed the full definition of MachineFunction.
Fix a few implicit dependencies further down.
Unmerges have the same fundamental problem as G_TRUNC, and G_TRUNC
could be implemented in terms of G_UNMERGE_VALUES. Reducing the number
of elements in unmerge results ends up producing the original unmerge
type profile, so the artifact combiner needs to eliminate the
intermediate illegal registers. This avoids infinite looping in the
legalizer in a future change.
Assuming an unmerge has each result unmerged the same way, this ends
up producing a new unmerge of the source for every definition. I'm not
sure if the artifact combiner should either insert temporary merges
here and erase the original merge, or if the combiner should look at
uses from defs rather than defs from uses for unmerges.
In a few cases this regresses from using 16-bit shifts for 8-bit
values to using 32-bit shifts, but I think these can be legalized
later (the other legalization rules don't try very hard to use 16-bit
shifts either).
There's a special case in hasAttribute for None when pImpl is null. If pImpl is not null we dispatch to pImpl->hasAttribute which will always return false for Attribute::None.
So if we just want to check for None its sufficient to just check that pImpl is null. Which can even be done inline.
This patch adds a helper for that case which I hope will speed up our getSubtargetImpl implementations.
Differential Revision: https://reviews.llvm.org/D86744
AArch64, X86 and Mips currently directly consumes these and custom
lowering to produce a libcall, but really these should follow the
normal legalization process through the libcall/lower action.
This patch implements initial backend support for a -mtune CPU controlled by a "tune-cpu" function attribute. If the attribute is not present X86 will use the resolved CPU from target-cpu attribute or command line.
This patch adds MC layer support a tune CPU. Each CPU now has two sets of features stored in their GenSubtargetInfo.inc tables . These features lists are passed separately to the Processor and ProcessorModel classes in tablegen. The tune list defaults to an empty list to avoid changes to non-X86. This annoyingly increases the size of static tables on all target as we now store 24 more bytes per CPU. I haven't quantified the overall impact, but I can if we're concerned.
One new test is added to X86 to show a few tuning features with mismatched tune-cpu and target-cpu/target-feature attributes to demonstrate independent control. Another new test is added to demonstrate that the scheduler model follows the tune CPU.
I have not added a -mtune to llc/opt or MC layer command line yet. With no attributes we'll just use the -mcpu for both. MC layer tools will always follow the normal CPU for tuning.
Differential Revision: https://reviews.llvm.org/D85165
There's no reason to involve the hassle of a virtual method targets
have to override for a simple boolean.
Not sure exactly what's going on with Mips, but it seems to define its
own totally separate handler classes.
Its effect could be achieved by
`-stop-after`,`-print-after`,`-print-after-all`. But a few tests need to
print MIR after ISel which could not be done with
`-print-after`/`-stop-after` since isel pass does not have commandline name.
That's the reason `--print-machineinstrs` is downgraded to
`--print-after-isel` in this patch. `--print-after-isel` could be
removed after we switch to new pass manager since isel pass would have a
commandline text name to use `print-after` or equivalent switches.
The motivation of this patch is to reduce tests dependency on
would-be-deprecated feature.
Reviewed By: arsenm, dsanders
Differential Revision: https://reviews.llvm.org/D83275
`FeatureMadd4` is used to disable `madd4`, and the corresponding feature
option is `(+-)nomadd4`. Renaming to the `FeatureNoMadd4` makes its
purpose clear.
Patch by YunQiang Su.
Differential Revision: https://reviews.llvm.org/D83780
Summary:
Avoid exposing details about how children are stored. This will enable
subsequent type-erasure changes.
New methods are introduced to cover common access patterns.
Change-Id: Idb5f4b1b9c84e4cc71ddb39bb52a388682f5674f
Reviewers: arsenm, RKSimon, mehdi_amini, courbet
Subscribers: qcolombet, sdardis, wdng, hiraditya, jrtc27, zzheng, atanasyan, asbirlea, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83083
When describing parameter value loaded by a COPY instruction, consider
case where needed Reg value is a sub- or super- register of the COPY
instruction's destination register. Without this patch, compile process
will crash with the assertion "TargetInstrInfo::describeLoadedValue
can't describe super- or sub-regs for copy instructions".
Patch by Nikola Tesic
Differential revision: https://reviews.llvm.org/D82000
The 32-bit type relocation (R_MIPS_32) cannot be used for instructions below:
ori $4, $4, start
ori $4, $4, (start - .)
We should print an error instead.
Reviewed By: atanasyan, MaskRay
Differential Revision: https://reviews.llvm.org/D81908
This was passing in all the parameters needed to construct a
LegalizerHelper in the custom legalization, when it's simpler to just
pass in the existing helper.
This is slightly more annoying to use in the common case where you
don't need the legalizer helper, but we could add back the common
parameters back in addition to the helper.
I didn't propagate this to all the internal target changes that this
logically implies, but did update a sample one for
legalizeMinNumMaxNum.
This is in preparation for moving AMDGPU load/store legalization
entirely into custom lowering. The current set of legalization actions
is really constraining and not really capable of expressing all the
actions needed to legalize loads/stores. In particular there's no way
to express when the memory access itself needs to change size vs. the
result type. There's also a lot of redundancy since the same
split/widen actions need to be applied in both vector and scalar
cases. All of the sub-cases logically belong as steps in the legalizer
helper, but it will be easier to consider everything at once in custom
lowering.
It was annoying enough that every custom lowering needed to set the
insert point, but this was made worse since now these all needed to be
updated to setInstrAndDebugLoc. Consolidate these so every
legalization action has the right insert position by default.
This should fix dropping debug info in every custom AMDGPU
legalization.
Summary: Note to downstream target maintainers: this might silently change the semantics of your code if you override `TargetLowering::HandleByVal` without marking it `override`.
This patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: sdardis, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81365
Amara Emerson