This adds the other potential bitcode sections that can exist and should
be stripped with `-r` from `llvm-bitcode-strip`.
Differential Revision: https://reviews.llvm.org/D132267
This should cut down on the visual noise when reducing. Still keep output when we run a pass or when we successfully reduce.
Notably, this also suppresses redirecting the test output to stdout/stderr.
Reviewed By: regehr
Differential Revision: https://reviews.llvm.org/D131922
We held off on this before as `LLVM_LIBDIR_SUFFIX` conflicted with it.
Now we return this.
`LLVM_LIBDIR_SUFFIX` is kept as a deprecated way to set
`CMAKE_INSTALL_LIBDIR`. The other `*_LIBDIR_SUFFIX` are just removed
entirely.
I imagine this is too potentially-breaking to make LLVM 15. That's fine.
I have a more minimal version of this in the disto (NixOS) patches for
LLVM 15 (like previous versions). This more expansive version I will
test harder after the release is cut.
Reviewed By: sebastian-ne, ldionne, #libc, #libc_abi
Differential Revision: https://reviews.llvm.org/D130586
This commit adds the definitions for `dyld_chained_starts_in_image`,
`dyld_chained_starts_in_segment`, and related enums. Dumping their
contents is possible with the -chained_fixups flag of llvm-otool.
The chained-fixups.yaml test was changed to cover bindings/rebases, as
well as weak imports, weak symbols and flat namespace symbols. Now that
we have actual fixup entries, the __DATA segment contains data that
would need to be hexdumped in YAML. We also test empty pages (to look
for the "DYLD_CHAINED_PTR_START_NONE" annotation), so the YAML would end
up quite large. So instead, this commit includes a binary file.
When Apple's effort to upstream their chained fixups code continues,
we'll replace this code with the then-upstreamed code. But we need
something in the meantime for testing ld64.lld's chained fixups code.
Differential Revision: https://reviews.llvm.org/D131961
llvm-objdump takes foo-bar style flags, while llvm-otool takes foo_bar style
flags. dyld_info was the only exception to that.
Add a -dyld_info flag to llvm-otool instead.
(Both in llvm-objdump and llvm-otool, the flag doesn't really do anything
yet.)
Differential Revision: https://reviews.llvm.org/D131897
When there are no section headers section information printed by llvm-readelf is not useful and unnecessarily verbose. When there are no program headers there's a similar verbose output shown when section mapping is requested. Simplifying the message shown in these cases to match the behavior of `GNU binuntils readelf`.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D130670
There are two different senses in which a block can be "address-taken".
There can be a BlockAddress involved, which means we need to map the
IR-level value to some specific block of machine code. Or there can be
constructs inside a function which involve using the address of a basic
block to implement certain kinds of control flow.
Mixing these together causes a problem: if target-specific passes are
marking random blocks "address-taken", if we have a BlockAddress, we
can't actually tell which MachineBasicBlock corresponds to the
BlockAddress.
So split this into two separate bits: one for BlockAddress, and one for
the machine-specific bits.
Discovered while trying to sort out related stuff on D102817.
Differential Revision: https://reviews.llvm.org/D124697
so that we can reduce away incidental parts of the CFG in cases where
the full simplifyCFG pass makes the test case uninteresting
Differential Revision: https://reviews.llvm.org/D131920
Using the legacy PM for the optimization pipeline is deprecated and in
the process of being removed. This is a small step in that direction.
For an example of migrating to the new PM:
853b57fe80
And --chained-fixups for llvm-objdump.
For now, this only prints the dyld_chained_fixups_header and adds
plumbing for the flag. This will be expanded in future commits.
When Apple's effort to upstream their chained fixups code continues,
we'll replace this code with the then-upstreamed code. But we need
something in the meantime for testing ld64.lld's chained fixups
code.
Update chained-fixups.yaml with a file that actually contains
the chained fixup data (`LinkEditData` doesn't encode it yet,
so use `__LINKEDIT` via `--raw-segment=data`).
Differential Revision: https://reviews.llvm.org/D131890
out of chunk ones. the non-default second argument to
removePredecessor() is necessary to avoid creating invalid IR on
examples like the one in the provided test case
Differential Revision: https://reviews.llvm.org/D131843
Initial platform support for COFF/x86_64.
Completed features:
* Statically linked orc runtime.
* Full linking/initialization of static/dynamic vc runtimes and microsoft stl libraries.
* SEH exception handling.
* Full static initializers support
* dlfns
* JIT side symbol lookup/dispatch
Things to note:
* It uses vc runtime libraries found in vc toolchain installations.
* Bootstrapping state is separated because when statically linking orc runtime it needs microsoft stl functions to initialize the orc runtime, but static initializers need to be ran in order to fully initialize stl libraries.
* Process symbols can't be used blidnly on msvc platform; otherwise duplicate definition error gets generated. If process symbols are used, it's destined to get out-of-reach error at some point.
* Atexit currently not handled -- will be handled in the follow-up patches.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D130479
This was done by adding --abort-on-invalid-reduction to remove-function-bodies-used-in-globals.ll and fixing the fallout.
Aliases must have a GlobalValue or ConstantExpr aliasee and the aliasee must be a definition if it's a GlobalValue.
Don't RAUW functions with null if there's an alias pointing to it, and similarly don't delete the body of a function.
Don't delete the entire body of a function when reducing blocks, preserve at least one block.
Also make debugging these sorts of things easier by dumping the module when --abort-on-invalid-reduction triggers.
Reviewed By: regehr
Differential Revision: https://reviews.llvm.org/D131505
It fittingly already makes use of add_llvm_utility during target creation and is usually only used in conjunction with other (test) related utilities such as FileCheck and not, which are already in utils.
Differential Revision: https://reviews.llvm.org/D131713
This patch teaches llvm-profdata to output the sample profile in the
JSON format. The new option is intended to be used for research and
development purposes. For example, one can write a Python script to
take a JSON file and analyze how similar different inline instances of
a given function are to each other.
I've chosen JSON because Python can parse it reasonably fast, and it
just takes a couple of lines to read the whole data:
import json
with open ('profile.json') as f:
profile = json.load(f)
Differential Revision: https://reviews.llvm.org/D130944
Fix two perf script parsing issues:
1) Redirect the error message to a new file. (the error message mixed in the perfscript could screw up the MMAP event line and cause a parsing failure)
2) Changed the MMap parsing error message to warning since the perfscript can still be parsed using the preferred address as base address.
Reviewed By: hoy, wenlei
Differential Revision: https://reviews.llvm.org/D131449
BSD and GNU ranlib support more than one input file. Implement this.
While here, update OVERVIEW (Ranlib => ranlib) since "ranlib" is more common.
Remove "speed access" since the index has nothing to do with performance: it is
mandatory for GNU ld and gold but ignored for ld.lld (D119074).
Close https://github.com/llvm/llvm-project/issues/54565
Differential Revision: https://reviews.llvm.org/D131375
llvm-dwarutil.cpp redundantly calls to InitializeAllAsmParsers.
That call might be removed as well as dependency on ${LLVM_TARGETS_TO_BUILD}
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D131157
The ABI for big-endian AArch32, as specified by AAELF32, is above-
averagely complicated. Relocatable object files are expected to store
instruction encodings in byte order matching the ELF file's endianness
(so, big-endian for a BE ELF file). But executable images can
//either// do that //or// store instructions little-endian regardless
of data and ELF endianness (to support BE32 and BE8 platforms
respectively). They signal the latter by setting the EF_ARM_BE8 flag
in the ELF header.
(In the case of the Thumb instruction set, this all means that each
16-bit halfword of a Thumb instruction is stored in one or other
endianness. The two halfwords of a 32-bit Thumb instruction must
appear in the same order no matter what, because the first halfword is
the one that must avoid overlapping the encoding of any 16-bit Thumb
instruction.)
llvm-objdump was unconditionally expecting Arm instructions to be
stored little-endian. So it would correctly disassemble a BE8 image,
but if you gave it a BE32 image or a BE object file, it would retrieve
every instruction in byte-swapped form and disassemble it to
nonsense. (Even an object file output by LLVM itself, because
ARMMCCodeEmitter outputs instructions big-endian in big-endian mode,
which is correct for writing an object file.)
This patch allows llvm-objdump to correctly disassemble all three of
those classes of Arm ELF file. It does it by introducing a new
SubtargetFeature for big-endian instructions, setting it from the ELF
image type and flags during llvm-objdump setup, and teaching both
ARMDisassembler and llvm-objdump itself to pay attention to it when
retrieving instruction data from a section being disassembled.
Differential Revision: https://reviews.llvm.org/D130902
Create function segments and emit unwind info of them.
A segment must be less than 1MB and no prolog or epilog is splitted between two
segments.
This patch should generate correct, though not optimal, unwind info for large
functions. Currently it only generate pacted info (.pdata) only for functions
that are less than 1MB (single-segment functions). This is NFC from before this
patch.
The next step is to enable (.pdata) only unwind info for the first segment or
segments that have neither prolog or epilog in a multi-segment function.
Another future work item is to further split segments that require more than 255
code words or have more than 65535 epilogs.
Reference:
https://docs.microsoft.com/en-us/cpp/build/arm64-exception-handling#function-fragments
Differential Revision: https://reviews.llvm.org/D130049
This connects the Symbolizer to the markup filter and enables the first
working end-to-end flow using the filter.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D130187
Add a reference to llvm_orc_registerJITLoaderGDBAllocAction from the
linkComponents function in the lli, llvm-jitlink, and llvm-jitlink-executor
tools. This ensures that llvm_orc_registerJITLoaderGDBAllocAction is not
dead-stripped in optimized builds, which may cause failures in these tools.
The llvm_orc_registerJITLoaderGDBAllocAction function was originally added with
MachO debugging support in 69be352a19, but that patch failed to update the
linkComponents functions.
http://llvm.org/PR56817
`split-file` is essentially a development tool used for writing tests. Other related tooling for this purpose such as `FileCheck`, `count`, `not` and more are already created via `add_llvm_utility` instead of `add_llvm_tool`. The later is more meant as LLVM tools used as part of a toolchain (eg. `llvm-ar`), not for tools for the development of LLVM itself.
The main semantic difference this makes is that `split-file` is now built and installed via the `LLVM_INSTALL_UTILS` and `LLVM_BUILD_UTILS` instead of `LLVM_BUILD_TOOLS` and `LLVM_INSTALL_TOOLS` cmake flags. That way one can use `LLVM_BUILD_TOOLS=OFF LLVM_INSTALL_UTILS=ON` and have `split-file` installed along side the other testing tools.
Differential Revision: https://reviews.llvm.org/D130977
Prefer using these accessors to access the special sub-commands
corresponding to the top-level (no subcommand) and all sub-commands.
This is a preparatory step towards removing the use of ManagedStatic:
with a subsequent change, these global instances will be moved to
be regular function-scope statics.
It is split up to give downstream projects a (albeit short) window in
which they can switch to using the accessors in a forward-compatible
way.
Differential Revision: https://reviews.llvm.org/D129118
If you're having trouble getting a yaml2obj macro expansion to do what
you want, it's useful to be able to print the output of the
preprocessing to see what your macros expanded to //before// going
into the YAML processing phase.
yaml2obj has its own preprocessing system which isn't the same as any
other well-known thing like cpp. So there's no way to do this macro
expansion via another tool: yaml2obj will have to do it itself.
In this commit I add an `-E` flag to yaml2obj to do that.
Differential Revision: https://reviews.llvm.org/D130981
Handles COFF import files of static archive. Changes static library genrator to build up object file map keyed by symbol name that excludes the symbols from dllimported symbols so that static generator will not be responsible for them. It exposes the list of dynamic libraries that need to be imported. Client should properly load the libraries in this list beforehand. Object file map is also an improvment from the past in terms of performance. Archive.findSym does a slow O(n) linear serach of symbol list to find the symbol. (we call findSym O(n) times, thus full time complexity is O(n^2); we were the only user of findSym function in fact)
There is a room for improvements in how to load the libraries in the list. We currently just hand the responsibility over to the clinet. A better way would be let ORC read this list and hand them over to JITLink side that would also help validation (e.g. not trying to generate stub for non dllimported targets) Nevertheless, we will have to exclude the symbols from COFF import object file list and need a way to access this list, which this patch offers.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D129952
Current DWARFLinker implementation does not support some debug sections
(mainly DWARF v5 sections). This patch adds diagnostic for such sections.
The warning would be displayed for critical(such that could not be removed)
sections and the source file would be skipped. Other unsupported sections
would be removed and warning message should be displayed. The zero exit
status would be returned for both cases.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D123623
Keith Smiley