This effectively splits the scheduling WriteVecMaskedStore(Y) classes
into four different classes (one per each variant).
The new VecMaskedStore scheduling classes are now correctly marked as
'unsupported' by the bdver2 and btver2 models.
No functional change intended.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D80201
Most X87 compare instructions write to the X87 status word, while the SSE (U)COMI compares write to rFLAGS. These are often handled very differently on CPUs (e.g. rFLAGS outputs typically involve a fpu2gpr transfer), and we shouldn't be grouping all these instructions behind a single class - so this patch splits off the SSE compares into a new WriteFComX class (and currently keeps the same behaviours). If there's a need to distinguish between X87 instructions more closely we can investigate that in the future, but as we don't handle any of the X87 side effects at the moment its unlikely to have any notable effect.
On BtVer2 conditional SIMD stores are heavily microcoded.
The latency is directly proportional to the number of packed elements extracted
from the input vector. Also, according to micro-benchmarks, most of the
computation seems to be done in the integer unit.
Only a minority of the uOPs is executed by the FPU. The observed behaviour on
the FPU looks similar to this:
- The input MASK value is moved to the Integer Unit
-- [ a VMOVMSK-like uOP-executed on JFPU0].
- In parallel, each element of the input XMM/YMM is extracted and then sent to
the IntegerUnit through JFPU1.
As expected, a (conditional) store is executed for every extracted element.
Interestingly, a (speculative) load is executed for every extracted element too.
It is as-if a "LOAD - BIT_EXTRACT- CMOV" sequence of uOPs is repeated by the
integer unit for every contionally stored element.
VMASKMOVDQU is a special case: the number of speculative loads is always 2
(presumably, one load per quadword). That means, extra shifts and masking is
performed on (one of) the loaded quadwords before each conditional store (that
also explains the big number of non-FP uOPs retired).
This patch replaces the existing writes for conditional SIMD stores (i.e.
WriteFMaskedStore, and WriteFMaskedStoreY) with the following new writes:
WriteFMaskedStore32 [ XMM Packed Single ]
WriteFMaskedStore32Y [ YMM Packed Single ]
WriteFMaskedStore64 [ XMM Packed Double ]
WriteFMaskedStore64Y [ YMM Packed Double ]
Added a wrapper class named X86SchedWriteMaskMove in X86Schedule.td to describe
both RM and MR variants for conditional SIMD moves in a single tablegen
definition.
Instances of that class are then passed in input to multiclass avx_movmask_rm
when constructing MASKMOVPS/PD definitions.
Since this patch introduces new writes, I had to update all the X86 scheduling
models.
Differential Revision: https://reviews.llvm.org/D66801
llvm-svn: 370649
Summary:
Reorder the condition code enum to match their encodings. Move it to MC layer so it can be used by the scheduler models.
This avoids needing an isel pattern for each condition code. And it removes
translation switches for converting between CMOV instructions and condition
codes.
Now the printer, encoder and disassembler take care of converting the immediate.
We use InstAliases to handle the assembly matching. But we print using the
asm string in the instruction definition. The instruction itself is marked
IsCodeGenOnly=1 to hide it from the assembly parser.
This does complicate the scheduler models a little since we can't assign the
A and BE instructions to a separate class now.
I plan to make similar changes for SETcc and Jcc.
Reviewers: RKSimon, spatel, lebedev.ri, andreadb, courbet
Reviewed By: RKSimon
Subscribers: gchatelet, hiraditya, kristina, lebedev.ri, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60041
llvm-svn: 357800
This custom inserter existed so we could do a weird thing where we pretended that the instructions support
a full address mode instead of taking a pointer in EAX/RAX. I think was largely so we could be pointer
size agnostic in the isel pattern.
To make this work we would then put the address into an LEA into EAX/RAX in front of the instruction after
isel. But the LEA is overkill when we just have a base pointer. So we end up using the LEA as a slower MOV
instruction.
With this change we now just do custom selection during isel instead and just assign the incoming address
of the intrinsic into EAX/RAX based on its size. After the intrinsic is selected, we can let isel take
care of selecting an LEA or other operation to do any address computation needed in this basic block.
I've also split the instruction into a 32-bit mode version and a 64-bit mode version so the implicit
use is properly sized based on the pointer. Without this we get comments in the assembly output about
killing eax and defing rax or vice versa depending on whether we define the instruction to use EAX/RAX.
llvm-svn: 357652
This patch adds a new ReadAdvance definition named ReadInt2Fpu.
ReadInt2Fpu allows x86 scheduling models to accurately describe delays caused by
data transfers from the integer unit to the floating point unit.
ReadInt2Fpu currently defaults to a delay of zero cycles (i.e. no delay) for all
x86 models excluding BtVer2. That means, this patch is only a functional change
for the Jaguar cpu model only.
Tablegen definitions for instructions (V)PINSR* have been updated to account for
the new ReadInt2Fpu. That read is mapped to the the GPR input operand.
On Jaguar, int-to-fpu transfers are modeled as a +6cy delay. Before this patch,
that extra delay was added to the opcode latency. In practice, the insert opcode
only executes for 1cy. Most of the actual latency is actually contributed by the
so-called operand-latency. According to the AMD SOG for family 16h, (V)PINSR*
latency is defined by expression f+1, where f is defined as a forwarding delay
from the integer unit to the fpu.
When printing instruction latency from MCA (see InstructionInfoView.cpp) and LLC
(only when flag -print-schedule is speified), we now need to account for any
extra forwarding delays. We do this by checking if scheduling classes declare
any negative ReadAdvance entries. Quoting a code comment in TargetSchedule.td:
"A negative advance effectively increases latency, which may be used for
cross-domain stalls". When computing the instruction latency for the purpose of
our scheduling tests, we now add any extra delay to the formula. This avoids
regressing existing codegen and mca schedule tests. It comes with the cost of an
extra (but very simple) hook in MCSchedModel.
Differential Revision: https://reviews.llvm.org/D57056
llvm-svn: 351965
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Currently we hardcode instructions with ReadAfterLd if the register operands don't need to be available until the folded load has completed. This doesn't take into account the different load latencies of different memory operands (PR36957).
This patch adds a ReadAfterFold def into X86FoldableSchedWrite to replace ReadAfterLd, allowing us to specify the load latency at a scheduler class level.
I've added ReadAfterVec*Ld classes that match the XMM/Scl, XMM and YMM/ZMM WriteVecLoad classes that we currently use, we can tweak these values in future patches once this infrastructure is in place.
Differential Revision: https://reviews.llvm.org/D52886
llvm-svn: 343868
Split WriteIMul by size and also by IMUL multiply-by-imm and multiply-by-reg cases.
This removes all the scheduler overrides for gpr multiplies and stops WriteMULH being ignored for BMI2 MULX instructions.
llvm-svn: 342892
Variable Shifts/Rotates using the CL register have different behaviours to the immediate instructions - split accordingly to help remove yet more repeated overrides from the schedule models.
llvm-svn: 342852
NFCI for now, but it should make it easier to remove a lot of unnecessary overrides in a future commit.
Now that funnel shift intrinsics are coming online we need to get this cleaned up to make vectorization costs from scalar rotate patterns more straightforward.
llvm-svn: 342837
Don't declare them as X86SchedWritePair when the folded class will never be used.
Note: MOVBE (load/store endian conversion) instructions tend to have a very different behaviour to BSWAP.
llvm-svn: 338412
Summary:
{F6603964}
While there is still some discrepancies within that new group,
it is clearly separate from the other shifts.
And Agner's tables agree, these double shifts are clearly
different from the normal shifts/rotates.
I'm guessing `FeatureSlowSHLD` is related.
Indeed, a basic sched pair is *not* the /best/ match.
But keeping it in the WriteShift is /clearly/ not ideal either.
This can and likely will be fine-tuned later.
This is purely mechanical change, it does not change any numbers,
as the [lack of the change of] mca tests show.
Reviewers: craig.topper, RKSimon, andreadb
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49015
llvm-svn: 336515
Summary:
Motivation: {F6597954}
This only does the mechanical splitting, does not actually change
any numbers, as the tests added in previous revision show.
Reviewers: craig.topper, RKSimon, courbet
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48998
llvm-svn: 336511
Summary:
I ran llvm-exegesis on SKX, SKL, BDW, HSW, SNB.
Atom is from Agner and SLM is a guess.
I've left AMD processors alone.
Reviewers: RKSimon, craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48079
llvm-svn: 335097
Summary:
This fixes most of the scheduling info for SKX vector operations.
I had to split a lot of the YMM/ZMM classes into separate classes for YMM and ZMM.
The before/after llvm-exegesis analysis are in the phabricator diff.
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47721
llvm-svn: 334407
Summary: In preparation for D47721. HSW and SNB still define unsupported
classes as they are used by KNL and generic models respectively.
Reviewers: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47763
llvm-svn: 334389
Summary:
{FLDL2E, FLDL2T, FLDLG2, FLDLN2, FLDPI} were using WriteMicrocoded.
- I've measured the values for Broadwell, Haswell, SandyBridge, Skylake.
- For ZnVer1 and Atom, values were transferred form InstRWs.
- For SLM and BtVer2, I've guessed some values :(
Reviewers: RKSimon, craig.topper, andreadb
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D47585
llvm-svn: 333656
Summary:
- I've measured the values for Broadwell, Haswell, SandyBridge, Skylake.
- For ZnVer1 and Atom, values were transferred form `InstRW`s.
- For SLM and BtVer2, values are from Agner.
This is split off from https://reviews.llvm.org/D47377
Reviewers: RKSimon, andreadb
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D47523
llvm-svn: 333642
BtVer2 - fix NumMicroOp and account for the Lat+6cy GPR->XMM and Lat+1cy XMm->GPR delays (see rL332737)
The high number of MOVD/MOVQ equivalent instructions meant that there were a number of missed patterns in SNB/Znver1:
SNB - add missing GPR<->MMX costs (taken from Agner / Intel AOM)
Znver1 - add missing GPR<->XMM MOVQ costs (taken from Agner)
llvm-svn: 332745
A lot of the models still have too many InstRW overrides for these new classes - this needs cleaning up but I wanted to get the classes in first
llvm-svn: 332451
BtVer2 - Fixes schedules for (V)CVTPS2PD instructions
A lot of the Intel models still have too many InstRW overrides for these new classes - this needs cleaning up but I wanted to get the classes in first
llvm-svn: 332376
Btver2 - VCVTPH2PSYrm needs to double pump the AGU
Broadwell - missing VCVTPS2PH*mr stores extra latency
Allows us to remove the WriteCvtF2FSt conversion store class
llvm-svn: 332357
This fixes a couple of BtVer2 missing instructions that weren't been handled in the override.
NOTE: There are still a lot of overrides that still need cleaning up!
llvm-svn: 331770
I've created the necessary classes but there are still a lot of overrides that need cleaning up.
NOTE: The Znver1 model was missing some div/idiv variants in the instregex patterns and wasn't setting the resource cycles at all in the overrides.
llvm-svn: 331767
Split to support single/double for scalar, XMM and YMM/ZMM instructions - removing InstrRW overrides for these instructions.
Fixes Atom ADDSUBPD instruction and reclassifies VFPCLASS as WriteFCmp which is closer in behaviour.
llvm-svn: 331672
Andrea Di Biagio