Code was added that used llvm error checking to parse .debug_aranges, but the error check after parsing the DWARFDebugArangesSet was reversed and was causing no error to be returned with no valid address ranges being actually used. This meant we always would fall back onto creating out own address ranges by parsing the compile unit's ranges. This was causing problems for cases where the DW_TAG_compile_unit had a single address range by using a DW_AT_low_pc and DW_AT_high_pc attribute pair (not using a DW_AT_ranges attribute), but the .debug_aranges had correct split ranges. In this case we would end up using the single range for the compile unit that encompassed all of the ranges from the .debug_aranges section and would cause address resolving issues in LLDB where address lookups would fail for certain addresses.
Differential Revision: https://reviews.llvm.org/D87626
offset_t is unsigned, so if the RHS is signed we get a warning from clang:
warning: comparison of integers of different signs: 'const unsigned long long' and 'const int'
If a producer emits a nonzero segment size, `lldb` will silently read
incorrect values and crash, or do something worse later as the tuple
size is expected to be 2, rather than 3.
Neither LLVM, nor GCC produce segmented aranges, but this dangerous case
should still be checked and handled.
Reviewed by: clayborg, labath
Differential Revision: https://reviews.llvm.org/D75925
Subscribers: lldb-commits
Tags: #lldb
Summary:
This change represents the move of ClangASTImporter, ClangASTMetadata,
ClangExternalASTSourceCallbacks, ClangUtil, CxxModuleHandler, and
TypeSystemClang from lldbSource to lldbPluginExpressionParserClang.h
This explicitly removes knowledge of clang internals from lldbSymbol,
moving towards a more generic core implementation of lldb.
Reviewers: JDevlieghere, davide, aprantl, teemperor, clayborg, labath, jingham, shafik
Subscribers: emaste, mgorny, arphaman, jfb, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73661
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
Summary:
This commit renames ClangASTContext to TypeSystemClang to better reflect what this class is actually supposed to do
(implement the TypeSystem interface for Clang). It also gets rid of the very confusing situation that we have both a
`clang::ASTContext` and a `ClangASTContext` in clang (which sometimes causes Clang people to think I'm fiddling
with Clang's ASTContext when I'm actually just doing LLDB work).
I also have plans to potentially have multiple clang::ASTContext instances associated with one ClangASTContext so
the ASTContext naming will then become even more confusing to people.
Reviewers: #lldb, aprantl, shafik, clayborg, labath, JDevlieghere, davide, espindola, jdoerfert, xiaobai
Reviewed By: clayborg, labath, xiaobai
Subscribers: wuzish, emaste, nemanjai, mgorny, kbarton, MaskRay, arphaman, jfb, usaxena95, jingham, xiaobai, abidh, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D72684
Summary:
Many of our tests need to initialize certain subsystems/plugins of LLDB such as
`FileSystem` or `HostInfo` by calling their static `Initialize` functions before the
test starts and then calling `::Terminate` after the test is done (in reverse order).
This adds a lot of error-prone boilerplate code to our testing code.
This patch adds a RAII called SubsystemRAII that ensures that we always call
::Initialize and then call ::Terminate after the test is done (and that the Terminate
calls are always in the reverse order of the ::Initialize calls). It also gets rid of
all of the boilerplate that we had for these calls.
Per-fixture initialization is still not very nice with this approach as it would
require some kind of static unique_ptr that gets manually assigned/reseted
from the gtest SetUpTestCase/TearDownTestCase functions. Because of that
I changed all per-fixture setup to now do per-test setup which can be done
by just having the SubsystemRAII as a member of the test fixture. This change doesn't
influence our normal test runtime as LIT anyway runs each test case separately
(and the Initialize/Terminate calls are anyway not very expensive). It will however
make running all tests in a single executable slightly slower.
Reviewers: labath, JDevlieghere, martong, espindola, shafik
Reviewed By: labath
Subscribers: mgorny, rnkovacs, emaste, MaskRay, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71630
After the recent refactorings the SymbolVendor passthrough no longer
serve any purpose. This patch removes those methods, and updates all
callsites to go to the symbol file directly -- in most cases that just
means calling GetSymbolFile()->foo() instead of
GetSymbolVendor()->foo().
llvm-svn: 368001
The issue was caused by the error checking code that was added. It was incorrectly adding an extra abbreviation when DWARFEnumState::Complete was received since it would push an extra abbreviation onto the list with the abbreviation code of zero. This cause m_idx_offset in each DWARFAbbreviationDeclarationSet to be set to UINT32_MAX. This valid indicates we must linearly search for attributes, not access them in O(1) time. This caused every DWARFDebugInfoEntry that would try to get its DWARFAbbreviationDeclaration from the CU's DWARFAbbreviationDeclarationSet to always linearly search the abbreviation set for a given abbreviation code. Easy to see why this would cause things to be slow.
This regression was caused by: https://reviews.llvm.org/D59370. I asked to ensure there was no regression is parsing or access speed, but that must not have been done. In my test with 40 DWARF files trying to set a breakpoint by function name and in a header file, I see a 8% speed improvement with this fix.
There was no regression in correctness, just very inefficient access.
Added full unit testing for DWARFAbbreviationDeclarationSet parsing to ensure this doesn't regress.
Differential Revision: https://reviews.llvm.org/D62630
llvm-svn: 362105
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
This patch extends the FileSystem class with a bunch of functions that
are currently implemented as methods of the FileSpec class. These
methods will be removed in future commits and replaced by calls to the
file system.
The new functions are operated in terms of the virtual file system which
was recently moved from clang into LLVM so it could be reused in lldb.
Because the VFS is stateful, we turned the FileSystem class into a
singleton.
Differential revision: https://reviews.llvm.org/D53532
llvm-svn: 345783
The rationale here is that ArchSpec is used throughout the codebase,
including in places which should not depend on the rest of the code in
the Core module.
This commit touches many files, but most of it is just renaming of
#include lines. In a couple of cases, I removed the #include ArchSpec
line altogether, as the file was not using it. In one or two places,
this necessitated adding other #includes like lldb-private-defines.h.
llvm-svn: 318048
Summary:
At present, several gtests in the lldb open source codebase are using
#include statements rooted at $(SOURCE_ROOT)/${LLDB_PROJECT_ROOT}.
This patch cleans up this directory/include structure for both CMake and
Xcode build systems.
rdar://problem/33835795
Reviewers: zturner, jingham, beanz
Reviewed By: beanz
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D36598
llvm-svn: 314849
Summary:
Fetching an input file required about five lines of code, and this was
repeated in multiple unit tests, with slight variations. Add a helper
function for doing that into the lldbUtilityMocks module (which I rename
to lldbUtilityHelpers to commemorate the fact it includes more than
mocks)
Reviewers: zturner, eugene
Subscribers: emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34683
llvm-svn: 306668
Split the PDB tests into DWARF test and actual PDB tests, the latter
requiring DIA SDK. Use the new LLVMConfig.cmake LLVM_ENABLE_DIA_SDK
symbol to enable the PDB tests rather than relying on
llvm/Config/config.h private include file that is not available when
building standalone.
Differential Revision: https://reviews.llvm.org/D26249
llvm-svn: 290819
Greg Clayton