When a target triple is specified in CMake via XXX_TARGET_TRIPLE, we tried
passing the --target=<...> flag to the compiler. However, not all compilers
support that flag (e.g. GCC, which is not a cross-compiler). As a result,
setting e.g. LIBCXX_TARGET_TRIPLE=<host-triple> would end up trying to
pass --target=<host-triple> to GCC, which breaks everything because the
flag isn't even supported.
This commit only adds `--target=<...>` & friends to the flags if it is
supported by the compiler.
One could argue that it's confusing to pass LIBCXX_TARGET_TRIPLE=<...>
and have it be ignored. That's correct, and one possibility would be
to assert that the requested triple is the same as the host triple when
we know the compiler is unable to cross-compile. However, note that this
is a pre-existing issue (setting the TARGET_TRIPLE variable never had an
influence on the flags passed to the compiler), and also fixing that is
starting to look like reimplementing a lot of CMake logic that is already
handled with CMAKE_CXX_COMPILER_TARGET.
Differential Revision: https://reviews.llvm.org/D106082
Instead, people should be using CMAKE_POSITION_INDEPENDENT_CODE to control
whether they want to use PIC or not. We should try to avoid reinventing
the wheel whenever CMake natively supports something.
This makes libc++abi consistent with libc++ and libunwind.
Differential Revision: https://reviews.llvm.org/D103973
Eventually, this should become the default way of running the tests.
For now, only move a few CI nodes to it, and keep a node that runs the
legacy configuration.
Differential Revision: https://reviews.llvm.org/D97565
To run llvm-lit manually from the command line:
./bin/llvm-lit -sv --param std=c++2b --param cxx_under_test=`pwd`/bin/clang \
--param debug_level=1 ../libcxx/test/
Tests that currently fail with `debug_level=1` are marked `LIBCXX-DEBUG-FIXME`,
but my intent is to deal with all of them and leave no such annotations in
the codebase within the next couple weeks. (I have patches for all of them
in my local checkout.)
Differential Revision: https://reviews.llvm.org/D100866
After this patch, we can use `--param std=c++20` even if the compiler only
supports -std=c++2a. The test suite will handle that for us. The only Lit
feature that isn't fully baked will always be the "in development" one,
since we don't know exactly what year the standard will be ratified in.
This is another take on https://reviews.llvm.org/D99789.
Differential Revision: https://reviews.llvm.org/D100210
These variables were introduced during early work on the runtimes build
but were obsoleted by {LIBCXX,LIBCXXABI,LIBUNWIND}_INSTALL_LIBRARY_DIR.
Differential Revision: https://reviews.llvm.org/D99697
Prior to this patch, we would generate a fancy <__config> header by
concatenating <__config_site> and <__config>. This complexifies the
build system and also increases the difference between what's tested
and what's actually installed.
This patch removes that complexity and instead simply installs <__config_site>
alongside the libc++ headers. <__config_site> is then included by <__config>,
which is much simpler. Doing this also opens the door to having different
<__config_site> headers depending on the target, which was impossible before.
It does change the workflow for testing header-only changes to libc++.
Previously, we would run `lit` against the headers in libcxx/include.
After this patch, we run it against a fake installation root of the
headers (containing a proper <__config_site> header). This makes use
closer to testing what we actually install, which is good, however it
does mean that we have to update that root before testing header changes.
Thus, we now need to run `ninja check-cxx-deps` before running `lit` by
hand.
Differential Revision: https://reviews.llvm.org/D97572
Instead of setting mcpu like the previous bots,
set the target triple.
Each config builds either Arm only or Thumb only
code. This gives us some coverage of thumb specific
issues.
The new agents on Linaro's side are running on v8 hardware
so will report arch "armv8l" just like the v8 bots.
(and buildkite can choose any of them for v7/v8 jobs)
Reviewed By: #libc, curdeius, Mordante
Differential Revision: https://reviews.llvm.org/D98019
Let's use -nostdlib++ rather than -nodefaultlibs when building libc++/libc++abi/libunwind libraries. The default is -nostdlib++ if supported by a build compiler like it is the case with clang, otherwise -nodefaultlibs is used as before.
This change is needed to avoid additional changes at the link step and not to increase the maintenance costs. If clang with -nodefaultlibs is used all the libraries which are removed but required would have to be manually added in. This set of libraries are unique and will send out.
The propose change will allow to make the link step simple for other platforms as well.
Reviewed By: #libc, #libc_abi, ldionne
Differential Revision: https://reviews.llvm.org/D95875
Always turn on LIBCXX_ENABLE_NEW_DELETE_DEFINITIONS, if libcxxrt is used
as the C++ ABI library, since libcxxrt does not provide the full set
ofnew and delete operators. In particular, the aligned versions of these
operators are completely missing. This primarily addresses builds on
FreeBSD, as this platform uses libcxxrt by default.
Also, attempt to provide a FreeBSD.cmake cache file, with hopefully sane
settings, partially copied from the Apple.cmake cache file. This needs
more work, probably some additions to ci build scripts (although I am
not aware of any 'official' FreeBSD build bots).
Reviewed By: ldionne, #libc
Differential Revision: https://reviews.llvm.org/D96720
Previously, LIBCXX_ENABLE_FILESYSTEM controlled only whether the filesystem
support was compiled into libc++'s library. This commit promotes the
setting to a first-class option like LIBCXX_ENABLE_LOCALIZATION, where
the whole library is aware of the setting and features that depend on
<filesystem> won't be provided at all. The test suite is also properly
annotated such that tests that depend on <filesystem> are disabled when
the library doesn't support it.
This is an alternative to https://llvm.org/D94824, but also an improvement
along the lines of LIBCXX_ENABLE_LOCALIZATION that I had been wanting to
make for a while.
Differential Revision: https://reviews.llvm.org/D94921
* The only exception is that the flag -std=c++2a is still used not to break compatibility with older compilers (clang <= 9, gcc <= 9).
* Bump _LIBCPP_STD_VER for C++20 to 20 and use 21 for the future standard (C++2b).
That's a preparation step to add c++2b support to libc++.
Reviewed By: ldionne, #libc
Differential Revision: https://reviews.llvm.org/D93383
This commit makes it clear that the typeinfo comparison implementation
is automatically selected by default, and that the CMake option only
overrides the value. This has been a source of confusion and bugs ever
since we've introduced complexity in that area, so I'm trying to simplify
it while still allowing for some control on the implementation.
Differential Revision: https://reviews.llvm.org/D91574
Currently, vendor-specific availability markup is enabled by default.
This means that even when building against trunk libc++, the headers
will by default prevent you from using some features that were not
released in the dylib on your target platform. This is a source of
frustration since people building libc++ from sources are usually not
trying to use some vendor's released dylib.
For that reason, I've been thinking for a long time that availability
annotations should be off by default, which is the primary change that
this commit enables.
In addition, it reworks the implementation to make it easier for new
vendors to add availability annotations for their platform, and it
refreshes the documentation to reflect the current state of the codebase.
Finally, a CMake configuration option is added to control whether
availability annotations should be turned on for the flavor of libc++
being created. The intent is for vendors like Apple to turn it on, and
for the upstream libc++ to leave it off (the default).
Differential Revision: https://reviews.llvm.org/D90843
When porting libc++ to embedded systems, it can be useful to drop support
for localization, which these systems don't implement or care about.
Differential Revision: https://reviews.llvm.org/D90072
This is a massive revert of the following commits (from most revent to oldest):
2b9b7b5775.
529ac3319728270234f169c2087283b5aa67446e5d796645d6
After checking-in the __config_site change, a lot of things started breaking
due to widespread reliance on various aspects of libc++'s build, notably the
fact that we can include the headers from the source tree, but also reliance
on various "internal" CMake variables used by the runtimes build and compiler-rt.
These were unintended consequences of the change, and after two days, we
still haven't restored all the bots to being green. Instead, now that I
understand what specific areas this will blow up in, I should be able to
chop up the patch into smaller ones that are easier to digest.
See https://reviews.llvm.org/D89041 for more details on this adventure.
This commit should really be named "Workaround external projects depending
on libc++ build system implementation details". It seems that the compiler-rt
build (and perhaps other projects) is relying on the fact that we copy libc++
and libc++abi headers to `<build-root>/include/c++/v1`. This was changed
by 5d796645, which moved the headers to `<build-root>/projects/libcxx/include/c++/v1`
and broke the compiler-rt build.
I'm committing this workaround to fix the compiler-rt build, but we should
remove reliance on implementation details like that. The correct way to
setup the compiler-rt build would be to "link" against the `cxx-headers`
target in CMake, or to run `install-cxx-headers` using an appropriate
installation prefix, and then manually add a `-I` path to that location.
Previously, we would define new/delete in both libc++ and libc++abi.
Not only does this cause code bloat, but also it's technically an ODR
violation since we don't know which operator will be selected. Furthermore,
since those are weak definitions, we should strive to have as few of them
as possible (to improve load times).
My preferred choice would have been to put the operators in libc++ only
by default, however that would create a circular dependency between
libc++ and libc++abi, which GNU linkers don't handle.
Folks who want to ship new/delete in libc++ instead of libc++abi are
free to do so by turning on LIBCXX_ENABLE_NEW_DELETE_DEFINITIONS at
CMake configure time.
On Apple platforms, this shouldn't be an ABI break because we re-export
the new/delete symbols from libc++abi. This change actually makes libc++
behave closer to the system libc++ shipped on Apple platforms.
On other platforms, this is an ABI break for people linking against libc++
but not libc++abi. However, vendors have been consulted in D68269 and no
objection was raised. Furthermore, the definitions can be controlled to
appear in libc++ instead with the CMake option.
Differential Revision: https://reviews.llvm.org/D68269
Some platforms, like several embedded platforms, do not provide a source
of randomness through a random device. This commit makes it possible to
build and test libc++ for such platforms, i.e. without std::random_device.
Surprisingly, the only functionality that doesn't work on such platforms
is std::random_device itself -- everything else in <random> still works,
one just has to find alternative ways to seed the PRNGs.
Remove check for standalone and shared library mode in libcxxabi to
allow including tests in said mode. This check prevented running the
tests in standalone mode with static libraries, which is the case for
baremetal targets.
Fix check-unwind target trying to use a non-existent llvm-lit executable
in standalone mode. Copy the HandleOutOfTreeLLVM logic from libcxxabi to
libunwind in order to make the tests work in standalone mode.
Reviewed By: ldionne, #libc_abi, #libc
Differential Revision: https://reviews.llvm.org/D86540
To make it clearer this is about whether the library supports the debug
mode at all, not whether the debug mode is enabled. Per comment by Nico
Weber on IRC.
Some libc++ builds may want to disable support for the debug mode,
for example to reduce code size or because the current implementation
of the debug mode requires a global map. This commit adds the
LIBCXX_ENABLE_DEBUG_MODE CMake option and ties it into the test
suite.
It also adds a CI job to test this configuration going forward.
Differential Revision: https://reviews.llvm.org/D88923
As explained in https://gitlab.kitware.com/cmake/cmake/-/issues/21045,
both branches of an $<IF> generator expression are evaluated eagerly
by CMake. As a result, if the non-selected branch contains an invalid
generator expression (such as getting the OUTPUT_NAME property of a
non-existent target), a hard error will occur.
This failed builds using the cxxrt ABI library, which doesn't create
a CMake target currently.
Instead of having complex logic around how to include the libc++ headers
and __config_site, handle that by defining cxx-headers as an INTERFACE
library and linking against it. After this patch, linking against cxx-headers
is sufficient to get the right __config_site include and include paths
for libc++.
Differential Revision: https://reviews.llvm.org/D82702
This allows passing parameters to the test suites without using
LLVM_LIT_ARGS. The problem is that we sometimes want to set some
Lit arguments on the CMake command line, but the Lit parameters in
a CMake cache file. If the only knob to do that is LLVM_LIT_ARGS,
the command-line entry overrides the cache one, and the parameters
set by the cache are ignored.
This fixes a current issue with the build bots that they completely
ignore the 'std' param set by Lit, because other Lit arguments are
provided via LLVM_LIT_ARGS on the CMake command-line.
Since we can always find the rest of the LLVM tree, we can always run the
tests in the standalone mode. Do it so that the default behavior is the
same in the standalone and non-standalone modes.
Since we require that libc++ is built as part of the monorepo layout, we
can assume the path of the rest of LLVM and avoid requiring that LLVM_PATH
be set explicitly.
We've decided to move away from that by requiring that libc++ is built
as part of the monorepo a while ago. This commit removes code pertaining
to that unsupported use case and produces a clear error when the user
violates that.
In fact, building outside of the monorepo will still work as long as
LLVM_PATH is pointing to the root of the LLVM project, although that
is not officially supported.
Before this patch, the __config_site header was only generated when at
least one __config_site macro needed to be defined. This lead to two
different code paths in how libc++ is configured, depending on whether
a __config_site header was generated or not. After this patch, the
__config_site is always generated, but it can be empty in case there
are no macros to define in it.
More context on why this change is important
--------------------------------------------
In addition to being confusing, this double-code-path situation lead to
broken code being checked in undetected in 2405bd6898, which introduced
the LIBCXX_HAS_MERGED_TYPEINFO_NAMES_DEFAULT CMake setting. Specifically,
the _LIBCPP_HAS_MERGED_TYPEINFO_NAMES_DEFAULT <__config_site> macro was
supposed NOT to be defined unless LIBCXX_HAS_MERGED_TYPEINFO_NAMES_DEFAULT
was specified explicitly on the CMake command line. Instead, what happened
is that it was defined to 0 if it wasn't specified explicitly and a
<__config_site> header was generated. And defining that macro to 0 had
the important effect of using the non-unique RTTI comparison implementation,
which changes the ABI.
This change in behavior wasn't noticed because the <__config_site> header
is not generated by default. However, the Apple configuration does cause
a <__config_site> header to be generated, which lead to the wrong RTTI
implementation being used, and to https://llvm.org/PR45549. We came close
to an ABI break in the dylib, but were saved due to a downstream-only
change that overrode the decision of the <__config_site> for the purpose
of RTTI comparisons in libc++abi. This is an incredible luck that we should
not rely on ever again.
While the problem itself was fixed with 2464d8135e by setting
LIBCXX_HAS_MERGED_TYPEINFO_NAMES_DEFAULT explicitly in the Apple
CMake cache and then in d0fcdcd28f by making the setting less
brittle, the point still is that we should have had a single code
path from the beginning. Unlike most normal libraries, the macros
that configure libc++ are really complex, there's a lot of them and
they control important properties of the C++ runtime. There must be
a single code path for that, and it must be simple and robust.
Differential Revision: https://reviews.llvm.org/D80927
When testing libc++ for our cross-compiled CheriBSD target we specify an
explicit LIBCXX_CXX_ABI_INCLUDE_PATHS for libcxxrt. The hardcoded path
/usr/include/c++/v1 was introduced in 61e89737c5
and overrides any value passed on the CMake command line. Fix this by using
it as a fallback rather than a fixed default value.
Reviewed By: #libc, ldionne
Differential Revision: https://reviews.llvm.org/D82095
This commit adds CMake caches for the various configurations of libc++
that are tested by our build bots.
Differential Revision: https://reviews.llvm.org/D81293
Before this patch, we tried detecting whether small atomics were available
without linking against libatomic. However, that's not really what we want
to know -- instead, we want to know what's required in order to support
atomics fully, which is to link against libatomic when it's provided.
That is both much simpler, and it doesn't suffer the problem that we would
not link against libatomic when small atomics didn't require it, which
lead to non-lockfree atomics never working.
Furthermore, because we understand that some platforms might not want to
(or be able to) ship non-lockfree atomics, we add that notion to the test
suite, independently of a potential extern library.
After this patch, we therefore:
(1) Link against libatomic when it is provided
(2) Independently detect whether non-lockfree atomics are supported in
the test suite, regardless of whether that means we're linking against
an external library or not (which is an implementation detail).
Differential Revision: https://reviews.llvm.org/D81190
When the __config_site header is generated, but LIBCXX_HAS_MERGED_TYPEINFO_NAMES_DEFAULT
wasn't specified, _LIBCPP_HAS_MERGED_TYPEINFO_NAMES_DEFAULT would be defined
to 0, which was the NonUnique RTTI comparison implementation. The intent
was to use the Unique RTTI comparison implementation in that case, which
caused https://llvm.org/PR45549.
Instead, use a proper "switch" to select the RTTI comparison implementation.
Note that 0 can't be used as a value, because that is treated the same
by CMake as a variable that is just not defined.
Differential Revision: https://reviews.llvm.org/D80037
Android doesn't have a libgcc_s and uses libgcc instead, so adjust the
build accordingly. This matches compiler-rt's build setup. libc++abi and
libunwind were already checking for libgcc but in a different context.
This change makes them search only for libgcc on Android now, but the
code to link against libgcc if it were present was already there.
Reviewed By: #libc, #libc_abi, #libunwind, rprichard, srhines
Differential Revision: https://reviews.llvm.org/D78787
The introduction of LIBCXX_HAS_MERGED_TYPEINFO_NAMES_DEFAULT changed
the default from =1 (assuming merged typeinfos) to =0 (not assuming
merged typeinfos) on all platforms where at least one other __config_site
macro is defined.
This commit explicitly enables the assumption of merged typeinfo names
on Apple platform to restore the previous behavior, at least until the
underlying issue has been fixed.
Instead of the ad-hoc #define _LIBCXX_DYNAMIC_FALLBACK, provide an option
to enable the setting when building libc++abi. Also use the occasion to
rename the option to something slightly more descriptive.
Note that in the future, it would be great to simply remove this option
altogether. However, in the meantime, it seems better to have it be an
official option than something ad-hoc.
It turns out that all this time, we've actually been building without
assertions enabled in the dylib. This commit updates the Apple CMake
cache to make it consistent with reality.
Louis Dionne