This change enables building builtins for multiple different targets
using LLVM runtimes directory.
To specify the builtin targets to be built, use the LLVM_BUILTIN_TARGETS
variable, where the value is the list of targets. To pass a per target
variable to the builtin build, you can set BUILTINS_<target>_<variable>
where <variable> will be passed to the builtin build for <target>.
Differential Revision: https://reviews.llvm.org/D26652
llvm-svn: 289491
It is kinda crazy to have llvm/include and llvm/lib/Target in the include path for every tablegen invocation for every tablegen-like tool.
This patch removes those flags from the tablgen function that is called everywhere by instead creating a variable LLVM_TABLEGEN_FLAGS which is setup in the LLVM source directories.
This removes TableGen.cmake's dependency on LLVM_MAIN_SRC_DIR, and LLVM_MAIN_INCLUDE_DIR.
llvm-svn: 288770
This fix, while a bit complicated, preserves the reusability while fixing the issues reported on llvm-commits with visual studio generators.
llvm-svn: 288679
Include component in install rules for Sphinx targets. Based on
a similar suggestion for other doc targets in D24935.
Differential Revision: https://reviews.llvm.org/D24982
llvm-svn: 288656
The old implementation of add_llvm_tool_symlink could fail in odd ways when building out of tree. This version solves that problem by not using the LLVM_* variables, and instead reaeding the target's properties.
llvm-svn: 288632
Add an optional parameter to `llvm_install_symlink` which allows the symlink
installation to be placed into a specific component rather than the default
value.
llvm-svn: 288600
This fixes a regression introduced by r285714: we weren't setting the
rpath on LLVMgold.so correctly.
Spotted by mark@chromium.org!
Differential Revision: https://reviews.llvm.org/D27176
llvm-svn: 288076
When LLVM_DEPENDENCY_DEBUGGING=On we should apply the sandbox only on the target, not the directory. This is important for directories that create more than one target, or for nested directories.
llvm-svn: 287415
Summary:
The motivation for this is to enable correct detection of dlopen() on Android.
Android does not provide a static version of libdl, so if we add the -static flag
after performing the check, it will succeed even though subsequent link steps
will fail. With this change we correctly detect the absence of libdl in a
LLVM_BUILD_STATIC build on Android.
The link itself still does not succeed because the code does not check the result
of this check properly, but I plan to fix that in a separate change.
Reviewers: beanz
Subscribers: danalbert, mgorny, srhines, tberghammer, llvm-commits
Differential Revision: https://reviews.llvm.org/D26463
llvm-svn: 287220
This patch adds an option to the build system LLVM_DEPENDENCY_DEBUGGING. Over time I plan to extend this to do more complex verifications, but the initial patch causes compile errors wherever there is missing a dependency on intrinsics_gen.
Because intrinsics_gen is a compile-time dependency not a link-time dependency, everything that relies on the headers generated in intrinsics_gen needs an explicit dependency.
llvm-svn: 287207
When using LLVM_DISTRIBUTION_COMPONENTS, it's possible for LLVM's
export list to be empty. If this happens the install(EXPORTS) command
will fail, but since there isn't anything to install anyway we really
just want to skip it.
llvm-svn: 286209
Summary:
Set _install_rpath to CMAKE_INSTALL_RPATH if it is defined, so that eventually
INSTALL_RPATH is set to CMAKE_INSTALL_RPATH.
The "if(NOT DEFINED CMAKE_INSTALL_RPATH)" was missing a corresponding else
clause.
This also cleans up the fix made in r285908.
Patch by Azharuddin Mohammed
Reviewers: john.brawn, sgundapa, beanz
Subscribers: chapuni, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D26289
llvm-svn: 286184
This Makes sure we only export targets that we're distributing, since
cmake will fail to import the file otherwise due to missing targets.
llvm-svn: 286024
r285714 made it so that when CMAKE_INSTALL_RPATH is set _install_rpath is not
set, but that means INSTALL_RPATH gets set to an empty string which isn't what
we want. Fix this by setting INSTALL_RPATH only when _install_rpath is set.
llvm-svn: 285908
This patch was produced in conjunction with Michał Górny. It should resolve the issues that were trying to be solved by D25304.
This moves rpath handling into `llvm_add_library` and `add_llvm_executable` so that it is available to all projects using AddLLVM whether built in-tree or out-of-tree.
llvm-svn: 285714
Summary:
This is temporary, until bot that builds public facing LLVM
documentation is upgraded. It reverts only the cmake change in r284497,
but leaves the doc changes in place to preserve intent.
Reviewers: aaron.ballman
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D26078
llvm-svn: 285406
Summary:
The RFC proposal sent to increase the minimum required GCC version
to 4.8 received a lot of support. See the following thread:
http://lists.llvm.org/pipermail/llvm-dev/2016-October/105955.html,
This patch implements that by updating the docs. I believe the
references to libstdc++ 4.7 issues can be removed as well, please
let me know if that is not the case or if they should be updated
a different way.
Reviewers: rengolin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25683
llvm-svn: 284497
Make LIT_COMMAND configurable, use source tree only when actually
available and extend the default search to other common executable names
'lit.py' and 'lit', in order to increase uniformity between all LLVM
projects and support using installed lit.
Changing the conditional used to determine whether in-tree or external
lit is being used covers the case when LLVM_MAIN_SRC_DIR is defined but
does not exist (anymore). In this case, the functions falls back to
looking for installed lit rather than attempting to use a non-existing
path. The same conditional is used in clang already.
Making LIT_COMMAND a cache variable in case the source tree variant is
used serves two purposes. Firstly, it increases uniformity between
the two branches since find_program() implicitly makes LIT_COMMAND
a cache variable. Secondly, it allows overriding the lit executable used
to run the tests when the LLVM source tree is provided. Gentoo is
planning to use this to use installed (and byte-compiled) lit instead of
re-compiling it in every LLVM project.
Extending default search is meant to increase uniformity between
different LLVM projects. The 'lit.py' name is already used by a few of
them, and 'lit' is the name used by utils/lit/setup.py when installing.
Differential Revision: https://reviews.llvm.org/D25076
llvm-svn: 283247
CMake requires that all targets expressed as dependencies exist, so we can't have intrinsics_gen in LLVM_COMMON_DEPENDS when it is written out, otherwise projects building out of tree will have CMake errors.
llvm-svn: 283234
Reintroduce versioning of shared libraries via SOVERSION, addressing
the issues with the previous design, since Gentoo is relying
on shared-split install of LLVM. The SOVERSIONs were originally
introduced in r229720 for all libraries, and removed in r252093 in favor
of custom SONAME. As far as I understand, the major concern with the old
versioning was that the used versions were incompatible with ldconfig.
Having considered that, this commit introduce SOVERSIONS with the
following considerations:
1. SOVERSIONs are formed of major & minor version concatenated -- i.e.
for 4.0 its .so.40. This matches the common practice where the first
version number indicates ABI breakage, and therefore fixes the issues
with ldconfig. Additionally, VERSION with the remaining verion
components appended is used, however this is not strictly necessary.
2. The versioning is only applied to libraries with no explicit SONAME
specified -- i.e. it won't apply to libLLVM but only to the split
libraries. It will also apply to libraries installed by the subprojects.
3. The versioning is only done on *nix systems, Darwin excluded. This
matches the current use of SONAME.
Differential Revision: https://reviews.llvm.org/D24757
llvm-svn: 283189
Use separate doctrees between different Sphinx builders in order to
prevent race condition issues due to multiple Sphinx instances accessing
the same doctree cache in parallel.
Bug: https://llvm.org/bugs/show_bug.cgi?id=23781
Differential Revision: https://reviews.llvm.org/D23755
llvm-svn: 283188
Revert the change in r283029 (and the fixup in r283033) due to buildbot
breakage. The fixup is ineffective for the bots that do not force clean
build since the wrong value is already cached in CMakeCache.txt.
Reverting it should result in the cache variable being removed
and therefore it should be possible to re-introduce it after all
buildbots build this revision.
llvm-svn: 283036
Make LIT_COMMAND configurable, use source tree only when actually
available and extend the default search to other common executable names
'lit.py' and 'lit', in order to increase uniformity between all LLVM
projects and support using installed lit.
Changing the conditional used to determine whether in-tree or external
lit is being used covers the case when LLVM_MAIN_SRC_DIR is defined but
does not exist (anymore). In this case, the functions falls back to
looking for installed lit rather than attempting to use a non-existing
path. The same conditional is used in clang already.
Making LIT_COMMAND a cache variable in case the source tree variant is
used serves two purposes. Firstly, it increases uniformity between
the two branches since find_program() implicitly makes LIT_COMMAND
a cache variable. Secondly, it allows overriding the lit executable used
to run the tests when the LLVM source tree is provided. Gentoo is
planning to use this to use installed (and byte-compiled) lit instead of
re-compiling it in every LLVM project.
Extending default search is meant to increase uniformity between
different LLVM projects. The 'lit.py' name is already used by a few of
them, and 'lit' is the name used by utils/lit/setup.py when installing.
Differential Revision: https://reviews.llvm.org/D25076
llvm-svn: 283029
Install the OCaml interface .mli files. Those files were most likely
omitted because they are input files for the compiled .cmi files.
However, installing them is reasonable since -- unlike .cmi files --
they are human-readable.
The issue was originally spotted by @jpdeplaix.
Differential Revision: https://reviews.llvm.org/D25128
llvm-svn: 283028
Add a OCAML_INSTALL_PATH variable that can be used to control
the install path for OCaml libraries. The new variable defaults to
${OCAML_STDLIB_PATH}, i.e. the OCaml library path obtained from
the OCaml compiler. Install libraries into "llvm" subdirectory.
This fixes two issues:
1. OCaml library directories differ between systems, and 'lib/ocaml' is
incorrect e.g. on amd64 Gentoo where OCaml is installed
in 'lib64/ocaml'. Therefore, obtain the library path from the OCaml
compiler using 'ocamlc -where' (which is already used to set
OCAML_STDLIB_PATH), which is the method used commonly in OCaml packages.
2. The top-level directory is reserved for the standard library, and has
precedence over local directory in search path. As a result, OCaml
preferred the files installed along with previous LLVM version over the
source tree when building a new version, resulting in two versions being
mixed during the build. The new layout is used commonly by other OCaml
packages, and findlib is able to find the LLVM libraries successfully.
Bug: https://bugs.gentoo.org/559134
Bug: https://bugs.gentoo.org/559624
Differential Revision: https://reviews.llvm.org/D24354
llvm-svn: 282895
When LLVM_INSTALL_TOOLCHAIN_ONLY is used and LLVM_TOOLCHAIN_TOOLS
contains a tool which is a symlink, it would be ignored. This already
worked before but got broken in r282510.
Differential Revision: https://reviews.llvm.org/D25067
llvm-svn: 282844
Summary:
The previous output was confusing as it would output "Taget triple:
x86_64-unknown-linux-gnu" even when LLVM_HOST_TRIPLE or
LLVM_DEFAULT_TARGET_TRIPLE were set on the CMake command line
Patch by: Alex Richardson!
Reviewers: beanz
Subscribers: Eugene.Zelenko
Differential Revision: https://reviews.llvm.org/D17067
llvm-svn: 282516
This supports creating symlinks to tools in different directories than
the tool is built to. This is useful for the LLDB framework build which
I’m sending patches for shortly.
llvm-svn: 281788
Summary:
When LLVM_LINK_LLVM_DYLIB is set, the libLLVM shared
library needs to be installed in the toolchain. Without
this chanage LLVM_INSTALL_TOOLCHAIN_ONLY combined with
LLVM_LINK_LLVM_DYLIB results in a broken install.
Patch by Sam Clegg
Differential Revision: https://reviews.llvm.org/D24676
llvm-svn: 281763
Previously, gtest/gtest_main were not exported via cmake. The intention here was
to ensure that users whom are linking against the LLVM install tree would not
get the gtest/gtest_main targets. This prevents downstream projects that link
against the LLVM build tree (i.e. Swift) from getting this dependency
information in their cmake builds. Without such dependency information, linker
issues can result on linux due to LLVMSupport being put before gtest on the
linker command line.
This commit preserves behavior that we want for the install tree, while adding
support for the build tree by:
1. The special casing for gtest/gtest_main in the add_llvm_library code is
removed in favor of a flag called "BUILDTREE_ONLY". If this is set, then the
library is communicating that it is only meant to be exported into the build
tree and is not meant to be installed or exported via the install tree. This
part is just a tweak to remove the special case, the underlying code is the
same.
2. The cmake code that exports cmake targets for the build tree has special code
to import an additional targets file called
LLVMBuildTreeOnlyExports.cmake. Additionally the extra targets are added to the
LLVMConfig.cmake's LLVM_EXPORTED_TARGETS variable. In contrast, the
"installation" cmake file uses the normal LLVM_EXPORTS_TARGETS as before and
does not include the extra exports file. This is implemented by
defining/undefining variables when performing a configure of the build/install
tree LLVMConfig.cmake files.
llvm-svn: 281085
This cleanup removes the need for the native support library to have its own target. That target was only needed because makefile builds were tripping over each other if two tablegen targets were building at the same time. This causes problems because the parallel make invocations through CMake can't communicate with each other. This is fixed by invoking make directly instead of through CMake which is how we handle this in External Project invocations.
The other part of the cleanup is to mark the custom commands as USES_TERMINAL. This is a bit of a hack, but we need to ensure that Ninja generators don't invoke multiple tablegen targets in the same build dir in parallel, because that too would be bad.
Marking as USES_TERMINAL does have some downside for Ninja because it results in decreased parallelism, but correct builds are worth the minor loss and LLVM_OPTIMZIED_TABLEGEN is such a huge win, it is worth it.
llvm-svn: 280748
That is, add build system support for building the OCaml bindings
against preinstalled LLVM libraries. This is important for package
managers such as OPAM, because OCaml libraries need to be built
against a specific OCaml compiler installation.
llvm-svn: 280642
This is a partial revert of r280013. Brad King pointed out these variable names are matching CMake conventions, so we should preserve them.
I've also added a direct mapping of the LLVM_*_DIR variables which we need to make projects support building in and out of tree.
llvm-svn: 280380
With the runtimes build we're trying to use LLVMConfig.cmake as a way of providing LLVM_* variables that are needed to behave as if the project is building in tree. To make this work we need to rename two variables by dropping the "S" from the end. This makes the variables match the in-tree names.
This renames:
LLVM_INCLUDE_DIRS -> LLVM_INCLUDE_DIR
LLVM_LIBRARY_DIRS -> LLVM_LIBRARY_DIR
The versions ending in S are not used in-tree anywhere. This also cleans up LLVM_LIBRARY_DIR being set to the same value with and without the "S".
llvm-svn: 280013
Summary:
Install CheckAtomic.cmake along with other LLVM modules, therefore making it possible for other projects to use it. This file is needed for LLDB to be built standalone, and installing it was suggested in https://reviews.llvm.org/D23881.
Patch by: Michał Górny
Reviewers: krytarowski, zturner, eugenis, jyknight, labath, beanz
Subscribers: beanz, llvm-commits
Differential Revision: https://reviews.llvm.org/D23887
llvm-svn: 279777
The subproject interface being used for runtime libraries expects that llvm-config is passed into the subproject for consumption. We currently do this for every subproject, so we should expect that all LLVM ExternalProjects depend on llvm-config for the time being.
Eventually I'd like to see the sub-projects using LLVMConfig.cmake instead of the llvm-config binary, but that will take time to roll out.
llvm-svn: 279155
Summary:
To build llgo, you must currently ensure that llgo
is in the tools/llgo directory, due to a hard-coded
path in llvm-go.
To support the use of LLVM_EXTERNAL_LLGO_SOURCE_DIR,
we introduce a flag to llvm-go that enables the
caller to specify the paths to symlink in the
temporary $GOPATH.
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D21634
llvm-svn: 276829
With in-tree builds we can get Output directories scattered among our
tests. Recursing into those to find tests doesn't make sense.
Thanks to nlewycky for noticing this!
llvm-svn: 276667
This option is the equivalent option to LLVM_BUILD_TOOLS but for executables
created via add_llvm_utility.
This is a useful tool for improving compile time in situations where LLVM is
used as a library and no testing tools are needed.
It follows the exact same implemention model as LLVM_BUILD_TOOLS.
Since the option is by default set to on, no behavior is changed unless one sets
it from the command line to be false.
llvm-svn: 275007
export_executable_symbols looks though the link libraries of the executable in
order to figure out transitive dependencies, but in doing so it assumes that
all link libraries are also targets. This is not true as of r273302, so adjust
it to check if they actually are targets.
llvm-svn: 274546
Previously out-of-tree passes could detect if LLVM was built with
LLVM_BUILD_32_BITS by looking for -m32 in LLVM_DEFINITIONS, but as of r271871
it no longer appears there. Resolve this by instead emitting LLVM_BUILD_32_BITS
in LLVMConfig so it can be checked for directly.
Differential Revision: http://reviews.llvm.org/D21434
llvm-svn: 274351
This reverts commit 3db82f646a0890eb7664d0351b5a3c79622e8bef.
Vassil already fixed this and I mechanically undid his fix without looking
too close at what I'm actually doing. Need more coffee.
llvm-svn: 274242
This fixes a typo introduced in r274196.
Thanks to Vassil Vassilev for noticing!
http://reviews.llvm.org/D21827
rdar://problem/27019000
llvm-svn: 274240
On Darwin it is currently impossible to build LLVM with modules
because the Darwin system module map is not compatible with
-fmodules-local-submodule-visibility at this point in time. This
patch makes the flag optional and off by default on Darwin so it
becomes possible to build LLVM with modules again.
http://reviews.llvm.org/D21827
rdar://problem/27019000
llvm-svn: 274196
This is just a small step in the direction of making LLVMConfig.cmake a complete
replacement for llvm-config.
For those unfamiliar, llvm-config --build-mode prints out CMAKE_BUILD_TYPE. Thus
as one can imagine, LLVM_BUILD_TYPE is @CMAKE_BUILD_TYPE@.
llvm-svn: 273782
Summary:
There are a few LLVM projects that produce runtime libraries. Ideally
runtime libraries should be built differently than other projects,
specifically they should be built using the just-built toolchain.
There is support for building compiler-rt in this way from the clang
build. Moving this logic into the LLVM build is interesting because it
provides a simpler way to extend the just-built toolchain to include
LLD and the LLVM object file tools.
Once this functionality is better fleshed out and tested we’ll want to
encapsulate it in a module that can be used for clang standalone
builds, and we’ll want to make it the default way to build compiler-rt.
With this patch applied there is no immediate change in the build.
Moving compiler-rt out from llvm/projects into llvm/runtimes enables
the functionality.
This code has a few improvements over the method provided by
LLVM_BUILD_EXTERNAL_COMPILER_RT. Specifically the sub-ninja command is
always invoked, so changes to compiler-rt source files will get built
properly, so this patch can be used for iterative development with
just-built tools.
This first patch only works with compiler-rt. Support for other
runtime projects will be coming in follow-up patches.
Reviewers: chandlerc, bogner
Subscribers: kubabrecka, llvm-commits
Differential Revision: http://reviews.llvm.org/D20992
llvm-svn: 273620
Patch by Nitesh Jain.
Summary: On some target like MIPS32 we need to explicitly link atomic library for 64 bit atomic operations. This module then can be used in LLDB (http://reviews.llvm.org/D20464) or Libcxx (http://reviews.llvm.org/D16613) for explicitly link to atomic library.
Reviewers: chandlerc, beanz
Differential: reviews.llvm.org/D20896
llvm-svn: 273534
LLVMConfig.cmake needs to set LLVM_BINARY_DIR differently based on whether or not it is the build directory or the install directory. The build directory just needs to set the value from the configuration, the install directory needs to set it to the install prefix.
llvm-svn: 273479
Otherwise it gets linked in by one of the dependencies of shared
libraries which may be too late and we end up with weird crashes in
std::call_once().
Differential Revision: http://reviews.llvm.org/D21478
llvm-svn: 273302
This is the more-correct fix to out-of-tree building. AddLLVM.cmake relies on this variable being set, so we should make sure it is set in LLVMConfig.cmake.
llvm-svn: 272279
This patch adds a new option LLVM_TOOLS_INSTALL_DIR which allows customizing the location executables and symlinks get installed to. This adds the functionality provided by autoconf's --bindir flag.
This patch is based on patches from and collaboration with Tony Kelman, and replaces http://reviews.llvm.org/D20934.
llvm-svn: 272200
Summary:
This allows customizing the location executables and symlinks get installed to,
as with --bindir in autotools.
Reviewers: loladiro, beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20934
llvm-svn: 272031
With CMP0056, try_compile() uses also CMAKE_EXE_LINKER_FLAG.
It caused mismatch between CMAKE_CXX_FLAGS and CMAKE_EXE_LINKER_FLAGS, to fail to examine CXX_SUPPORTS_CXX11 with -m32.
FYI, before this, try_compile() tries without -m32 regardless of LLVM_BUILD_32_BITS.
llvm-svn: 271871
The problem with plugins on Windows is that when building a plugin DLL it needs
to explicitly link against something (an exe or DLL) if it uses symbols from
that thing, and that thing must explicitly export those symbols. Also there's a
limit of 65535 symbols that can be exported. This means that currently plugins
only work on Windows when using BUILD_SHARED_LIBS, and that doesn't work with
MSVC.
This patch adds an LLVM_EXPORT_SYMBOLS_FOR_PLUGINS option, which when enabled
automatically exports from all LLVM tools the symbols that a plugin could want
to use so that a plugin can link against a tool directly. Plugins can specify
what tool they link against by using PLUGIN_TOOL argument to llvm_add_library.
The option can also be enabled on Linux, though there all it should do is
restrict the set of symbols that are exported as by default all symbols are
exported.
This option is currently OFF by default, as while I've verified that it works
with MSVC, linux gcc, and cygwin gcc, I haven't tried mingw gcc and I have no
idea what will happen on OSX. Also unfortunately we can't turn on
LLVM_ENABLE_PLUGINS when the option is ON as bugpoint-passes needs to be
loaded by both bugpoint.exe and opt.exe which is incompatible with this
approach. Also currently clang plugins don't work with this approach, which
will be fixed in future patches.
Differential Revision: http://reviews.llvm.org/D18826
llvm-svn: 270839
This should actually address PR27855. This results in adding references to the system libs inside generated dylibs so that they get correctly pulled in when linking against the dylib.
llvm-svn: 270723
Compiler-RT needs LLVM_LIBRARY_DIR, LLVM_BINARY_DIR.
Setting these in LLVMConfig.cmake will allow Compiler-RT to not need to run llvm-config as long as the LLVMConfig.cmake module is in the CMake module path.
llvm-svn: 269104
Currently our cmake generates targets like check-llvm-unit and
check-llvm-transforms-loopunroll-x86, but not check-llvm-transforms or
check-llvm-transforms-adce. This is because the search for test suites
only lists the ones with a custom lit.cfg or lit.local.cfg.
Instead, we can do something a little smarter - any directory under
test that isn't called Inputs or inside a directory called Inputs is a
test suite.
llvm-svn: 268806
Summary:
As per the discussion on LLVM-dev this patch proposes removing LLVM_ENABLE_TIMESTAMPS.
The only complicated bit of this patch is the Windows support. On windows we used to log an error if /INCREMENTAL was passed to the linker when timestamps were disabled.
With this change since timestamps in code are always disabled we will always compile on windows with /Brepro unless /INCREMENTAL is specified, and we will log a warning when /INCREMENTAL is specified to notify the user that the build will be non-deterministic.
See: http://lists.llvm.org/pipermail/llvm-dev/2016-May/098990.html
Reviewers: bogner, silvas, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19892
llvm-svn: 268670
Summary:
Historically, we had a switch in the Makefiles for turning on "expensive
checks". This has never been ported to the cmake build, but the
(dead-ish) code is still around.
This will also make it easier to turn it on in buildbots.
Reviewers: chandlerc
Subscribers: jyknight, mzolotukhin, RKSimon, gberry, llvm-commits
Differential Revision: http://reviews.llvm.org/D19723
llvm-svn: 268050
Petr Hosek