Summary: This speeds up code completion. All the cool kids (ycmd) are doing it.
Reviewers: bkramer, ilya-biryukov
Reviewed By: bkramer
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D33350
llvm-svn: 303547
This patch adds support for the `micromips` and `nomicromips` attributes
for MIPS targets.
Differential revision: https://reviews.llvm.org/D33363
llvm-svn: 303546
This patch adds handling of the `micromips` and `nomicromips` attributes
passed by front-end. The patch depends on D33363.
Differential revision: https://reviews.llvm.org/D33364
llvm-svn: 303545
It's causing some buildbots to timeout whenever tablegen needs re-compilation,
particularly those with -fsanitize=memory but not only them. A compile time
regression was expected since it triples the amount of SelectionDAG rules we
are able to import but it's currently too high.
llvm-svn: 303542
Summary:
r303415 changed the way a sequence of line comments following a preprocessor
macro is handled, which has the unfortunate effect of aligning a trailing
preprocessor line comment and following unrelated section comments, so:
```
#ifdef A // comment about A
// section comment
#endif
```
gets turned into:
```
#ifdef A // comment about A
// section comment
#endif
```
This patch fixes this by additionally checking the original start columns of
the line comments.
Reviewers: djasper
Reviewed By: djasper
Subscribers: klimek, cfe-commits
Differential Revision: https://reviews.llvm.org/D33394
llvm-svn: 303541
Re-applying now that PR32825 which was raised on the commit this fixed up is now known to have also been fixed by this commit.
Original commit message:
Multiple ldr pseudoinstructions with the same constant value will
reuse the same constant pool entry. However, if the constant pool
is explicitly flushed with a .ltorg directive, we should not try
to reference constants in the previous pool any longer, since they
may be out of range.
This fixes assembling hand-written assembler source which repeatedly
loads the same constant value, across a binary size larger than the
pc-relative fixup range for ldr instructions (4096 bytes). Such
assembler source already uses explicit .ltorg instructions to emit
constant pools with regular intervals. However if we try to reuse
constants emitted in earlier pools, they end up out of range.
This makes the output of the testcase match what binutils gas does
(prior to this patch, it would fail to assemble).
Differential Revision: https://reviews.llvm.org/D32847
llvm-svn: 303540
Re-applying now that the open bug on this commit, PR32825, is known to be fixed.
Original commit message:
Summary: This patch returns the same label if the CP entry with the same value has been created.
Reviewers: eli.friedman, rengolin, jmolloy
Subscribers: majnemer, jmolloy, llvm-commits
Differential Revision: https://reviews.llvm.org/D25804
llvm-svn: 303539
This reverts commit r302416. This was a fixup for r286006, which has now been reverted so this doesn't apply (either in concept or in code).
This commit itself has no problems, but the underlying issue it was fixing has now disappeared from the codebase.
llvm-svn: 303536
Summary:
Add option to customize the penalty for breaking assignment
This allows increasing the priority of the assignment, to prefer spliting
an operation instead of splitting the assignment, e.g. :
int a = bbbbbbbbbbbbbbbb +
cccccccccccccccc;
Reviewers: krasimir, djasper
Reviewed By: djasper
Subscribers: cfe-commits, klimek
Differential Revision: https://reviews.llvm.org/D32477
llvm-svn: 303534
llvm-symbolizer would fail to symbolize addresses in unlinked object
files when handling .dwo file data because the addresses would not be
relocated in the same way as the ranges in the skeleton CU in the object
file.
Fix that so object files can be symbolized the same as executables.
llvm-svn: 303532
This is a re-application of a r303497 that was reverted in r303498.
I thought it had broken a bot when it had not (the breakage did not
go away with the revert).
This change makes the split between the "exact" backedge taken count
and the "maximum" backedge taken count a bit more obvious. Both of
these are upper bounds on the number of times the loop header
executes (since SCEV does not account for most kinds of abnormal
control flow), but the latter is guaranteed to be a constant.
There were a few places where the max backedge taken count *was* a
non-constant; I've changed those to compute constants instead.
At this point, I'm not sure if the constant max backedge count can be
computed by calling `getUnsignedRange(Exact).getUnsignedMax()` without
losing precision. If it can, we can simplify even further by making
`getMaxBackedgeTakenCount` a thin wrapper around
`getBackedgeTakenCount` and `getUnsignedRange`.
llvm-svn: 303531
Summary:
Fix naming conventions and const correctness.
This completes the changes made in rL303029.
Patch by Yoav Ben-Shalom.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33377
llvm-svn: 303529
This reverts commit r303304 because it looks like the change
introduced a crash bug. At least after that change, LLD with thinlto
crashes when linking Chromium.
llvm-svn: 303527
Allow the BlockGenerator to generate memory writes that are not defined
over the complete statement domain, but only over a subset of it. It
generates a condition that evaluates to 1 if executing the subdomain,
and only then execute the access.
Only write accesses are supported. Read accesses would require a PHINode
which has a value if the access is not executed.
Partial write makes DeLICM able to apply mappings that are not defined
over the entire domain (for instance, a branch that leaves a loop with
a PHINode in its header; a MemoryKind::PHI write when leaving is never
read by its PHI read).
Differential Revision: https://reviews.llvm.org/D33255
llvm-svn: 303517
Taken from PR32845. Dan removed the most dominating leader check
in r303443, but we check this test anyway to make sure things
don't regress.
llvm-svn: 303515
Otherwise we end up miscompiling, transforming:
define i8 @tinky() {
%sext = sext i1 1 to i16
%hibit = lshr i16 %sext, 15
%tr = trunc i16 %hibit to i8
ret i8 %tr
}
into:
%sext = sext i1 1 to i8
ret i8 %sext
and the first get folded to ret i8 1, while the second gets folded
to ret i8 -1.
Eventually we should get rid of this transform entirely, but for now,
this at least fixes a know correctness bug.
Differential Revision: https://reviews.llvm.org/D33338
llvm-svn: 303513
This commit exports the majority of the isl functions to the isl C++ interface.
The official isl C++ bindings still require discussions to define the set of
functions that are officially supported. As a result, the officially exported
functionality will be rather limited until these discussions conclude and a
non-trivial set of isl functions is officially supported through the isl C++
bindings. Starting from this commit we ship with Polly an extended version of
the official isl C++ bindings to ensure sufficient functionality is available
such that LLVM developers can make efficient use of isl through C++. The
practical experience Polly gathers with its bindings will then be used to
gradually upstream patches to isl to extend the official bindings.
llvm-svn: 303506
This reduces the diff to the official isl C++ bindings and solves a correctness
issue with isl::booleans, where isl_bool_error results were accidentally
converted to isl::boolean::true.
llvm-svn: 303505
As discussed in:
https://reviews.llvm.org/D33338
...we may be able to remove a wider pattern match by doing these more
basic canonicalizations.
llvm-svn: 303504
Instead of relying on these functions to be part of the isl C++ bindings, we
just define this functionality independently. This allows us to use isl C++
bindings that do not contain LLVM specific functionality.
llvm-svn: 303503
PPC backend eliminates compare instructions by using record-form instructions in PPCInstrInfo::optimizeCompareInstr, which is called from peephole optimization pass.
This patch improves this optimization to eliminate more compare instructions in two types of common case.
- comparison against a constant 1 or -1
The record-form instructions set CR bit based on signed comparison against 0. So, the current implementation does not exploit the record-form instruction for comparison against a non-zero constant.
This patch enables record-form optimization for constant of 1 or -1 if possible; it changes the condition "greater than -1" into "greater than or equal to 0" and "less than 1" into "less than or equal to 0".
With this patch, compare can be eliminated in the following code sequence, as an example.
uint64_t a, b;
if ((a | b) & 0x8000000000000000ull) { ... }
else { ... }
- andi for 32-bit comparison on PPC64
Since record-form instructions execute 64-bit signed comparison and so we have limitation in eliminating 32-bit comparison, i.e. with cmplwi, using the record-form. The original implementation already has such checks but andi. is not recognized as an instruction which executes implicit zero extension and hence safe to convert into record-form if used for equality check.
%1 = and i32 %a, 10
%2 = icmp ne i32 %1, 0
br i1 %2, label %foo, label %bar
In this simple example, LLVM generates andi. + cmplwi + beq on PPC64.
This patch make it possible to eliminate the cmplwi for this case.
I added andi. for optimization targets if it is safe to do so.
Differential Revision: https://reviews.llvm.org/D30081
llvm-svn: 303500
This change makes the split between the "exact" backedge taken count
and the "maximum" backedge taken count a bit more obvious. Both of
these are upper bounds on the number of times the loop header
executes (since SCEV does not account for most kinds of abnormal
control flow), but the latter is guaranteed to be a constant.
There were a few places where the max backedge taken count *was* a
non-constant; I've changed those to compute constants instead.
At this point, I'm not sure if the constant max backedge count can be
computed by calling `getUnsignedRange(Exact).getUnsignedMax()` without
losing precision. If it can, we can simplify even further by making
`getMaxBackedgeTakenCount` a thin wrapper around
`getBackedgeTakenCount` and `getUnsignedRange`.
llvm-svn: 303497
Krasimir Georgiev