Summary:
The call is duplicated in the handlers of all Expr subclasses.
This change makes it easy to split statement handling out to
TextNodeDumper.
Reviewers: aaron.ballman
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D55339
llvm-svn: 348546
Summary: This call is duplicated in Visits of all direct subclasses of Stmt.
Reviewers: aaron.ballman
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D55338
llvm-svn: 348545
This addresses a FIXME and avoids depending on an isel pattern match I think. I've remove the isel patterns too since he have no lit tests left that cover them. Hopefully that really means they are unused.
I'm trying to decide if we need SETCC_CARRY. This removes one of its usages.
Differential Revision: https://reviews.llvm.org/D55355
llvm-svn: 348536
This was probably organized as it was because bswap is a unary op.
But that's where the similarity to the other opcodes ends. We should
not limit this transform to scalars, and we should not try it if
either input has other uses. This is another step towards trying to
clean this whole function up to prevent it from causing infinite loops
and memory explosions.
Earlier commits in this series:
rL348501
rL348508
rL348518
llvm-svn: 348534
The attribute specifies that the call of the C++ method consumes a
reference to "this".
Differential Revision: https://reviews.llvm.org/D55155
llvm-svn: 348532
Summary:
When providing a non-const-callable comparator in a map or set, the
warning diagnostic does not include the point of instantiation of
the container that triggered the warning, which makes it difficult
to track down the problem. This commit improves the diagnostic by
placing it directly in the body of the associative container.
The same change is applied to unordered associative containers, which
had a similar problem.
Finally, this commit cleans up the forward declarations of several
map and unordered_map helpers, which are not needed anymore.
<rdar://problem/41370747>
Reviewers: EricWF, mclow.lists
Subscribers: christof, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D48955
llvm-svn: 348529
Summary:
This parses entries in pecoff import tables for imported DLLs and
is intended as the first step to allow LLDB to load a PE's shared
modules when creating a target on the LLDB console.
Reviewers: rnk, zturner, aleksandr.urakov, lldb-commits, labath, asmith
Reviewed By: labath, asmith
Subscribers: labath, lemo, clayborg, Hui, mgorny, mgrang, teemperor
Differential Revision: https://reviews.llvm.org/D53094
llvm-svn: 348527
Summary:
Windows lldb debugging currently uses a process plugin to handle
launching and attaching to a process. Launching a process via a debug
server (e.g. ds2) and attaching to it with `gdb-remote port` currently
doesn't communicate address information of the executable properly.
Implement DynamicLoaderWindowsDYLD::DidAttach which allow us to
obtain the proper executable load address.
Differential Revision: https://reviews.llvm.org/D55383
llvm-svn: 348526
Otherwise, some tests would fail when a relative path was passed,
because they'd use the relative path from a different directory
than the current working directory.
llvm-svn: 348525
Include CompilerRTCompile in fuzzer tests explicitly. Otherwise, when
building only libFuzzer, CMake fails due to:
CMake Error at cmake/Modules/AddCompilerRT.cmake:395 (sanitizer_test_compile):
Unknown CMake command "sanitizer_test_compile".
Call Stack (most recent call first):
lib/fuzzer/tests/CMakeLists.txt:53 (generate_compiler_rt_tests)
Differential Revision: https://reviews.llvm.org/D55378
llvm-svn: 348524
Unlike some of the folds in hoistLogicOpWithSameOpcodeHands()
above this shuffle transform, this has the expected hasOneUse()
checks in place.
llvm-svn: 348523
This patch introduces a new DAGCombiner rule to simplify concat_vectors nodes:
concat_vectors( bitcast (scalar_to_vector %A), UNDEF)
--> bitcast (scalar_to_vector %A)
This patch only partially addresses PR39257. In particular, it is enough to fix
one of the two problematic cases mentioned in PR39257. However, it is not enough
to fix the original test case posted by Craig; that particular case would
probably require a more complicated approach (and knowledge about used bits).
Before this patch, we used to generate the following code for function PR39257
(-mtriple=x86_64 , -mattr=+avx):
vmovsd (%rdi), %xmm0 # xmm0 = mem[0],zero
vxorps %xmm1, %xmm1, %xmm1
vblendps $3, %xmm0, %xmm1, %xmm0 # xmm0 = xmm0[0,1],xmm1[2,3]
vmovaps %ymm0, (%rsi)
vzeroupper
retq
Now we generate this:
vmovsd (%rdi), %xmm0 # xmm0 = mem[0],zero
vmovaps %ymm0, (%rsi)
vzeroupper
retq
As a side note: that VZEROUPPER is completely redundant...
I guess the vzeroupper insertion pass doesn't realize that the definition of
%xmm0 from vmovsd is already zeroing the upper half of %ymm0. Note that on
%-mcpu=btver2, we don't get that vzeroupper because pass vzeroupper insertion
%pass is disabled.
Differential Revision: https://reviews.llvm.org/D55274
llvm-svn: 348522
The tests were marked to fail based on the 'availability' LIT feature.
However, those tests should really only be failing when we run them
against the dylibs that were deployed on macosx10.7 and macosx10.8,
which the deployment target has nothing to do with.
This caused the tests to unexpectedly pass when running the tests
with deployment target macosx10.{7,8} but running with a recent dylib.
llvm-svn: 348520
The PPC test with 2 extra uses seems clearly better by avoiding this transform.
With 1 extra use, we also prevent an extra register move (although that might
be an RA problem). The general rule should be to only make a change here if
it is always profitable. The x86 diffs are all neutral.
llvm-svn: 348518
The flag -fdebug-compilation-dir is useful to make generated .o files
independent of the path of the build directory, without making the compile
command-line dependent on the path of the build directory, like
-fdebug-prefix-map requires. This change makes it so that the driver can
forward the flag to -cc1as, like it already can for -cc1. We might want to
consider making -fdebug-compilation-dir a driver flag in a follow-up.
(Since -fdebug-compilation-dir defaults to PWD, it's already possible to get
this effect by setting PWD, but explicit compiler flags are better than env
vars, because e.g. ninja tracks command lines and reruns commands that change.)
Somewhat related to PR14625.
Differential Revision: https://reviews.llvm.org/D55377
llvm-svn: 348515
This reverts commit r348280 and reapplies D55085 without modifications.
Original commit message:
Avoid emitting redundant or unusable directories in DIFile metadata entries.
As discussed on llvm-dev recently, Clang currently emits redundant
directories in DIFile entries, such as
.file 1 "/Volumes/Data/llvm" "/Volumes/Data/llvm/tools/clang/test/CodeGen/debug-info-abspath.c"
This patch looks at any common prefix between the compilation
directory and the (absolute) file path and strips the redundant
part. More importantly it leaves the compilation directory empty if
the two paths have no common prefix.
After this patch the above entry is (assuming a compilation dir of "/Volumes/Data/llvm/_build"):
.file 1 "/Volumes/Data/llvm" "tools/clang/test/CodeGen/debug-info-abspath.c"
When building the FileCheck binary with debug info, this patch makes
the build artifacts ~1kb smaller.
Differential Revision: https://reviews.llvm.org/D55085
llvm-svn: 348513
This reverts commit r348203 and reapplies D55085 with an additional
GCOV bugfix to make the change NFC for relative file paths in .gcno files.
Thanks to Ilya Biryukov for additional testing!
Original commit message:
Update Diagnostic handling for changes in CFE.
The clang frontend no longer emits the current working directory for
DIFiles containing an absolute path in the filename: and will move the
common prefix between current working directory and the file into the
directory: component.
https://reviews.llvm.org/D55085
llvm-svn: 348512
In compile-and-link mode, the user doesn't specify the name of the
object files to generate, because there could be multiple inputs
on a single command line and this would be hard to specify. So the
script just tries to be smart and figure out the best object file
names. However, if two build scripts are running in parallel and
using the same source files as input, they would previously race
to write the same object files, since the computed name only considered
the source file names when computing the object file names.
With this patch, we also consider the final executable name. In a
way, this "namespaces" the generated object files so that as long
as the final executable file names don't clash, the intermediate
object file names won't clash either.
llvm-svn: 348511
The standard section [array.zero] requires the return value of begin()
and end() methods of a zero-sized array to be unique. Eric Fiselier
clarifies: "That unique value cannot be null, and must be properly aligned".
This patch adds checks for the first part of this clarification: unique
value returned by these methods cannot be null.
Reviewed as https://reviews.llvm.org/D55366.
Thanks to Andrey Maksimov for the patch.
llvm-svn: 348509
The AVX512 diffs are neutral, but the bswap test shows a clear overreach in
hoistLogicOpWithSameOpcodeHands(). If we don't check for other uses, we can
increase the instruction count.
This could also fight with transforms trying to go in the opposite direction
and possibly blow up/infinite loop. This might be enough to solve the bug
noted here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20181203/608593.html
I did not add the hasOneUse() checks to all opcodes because I see a perf
regression for at least one opcode. We may decide that's irrelevant in the
face of potential compiler crashing, but I'll see if I can salvage that first.
llvm-svn: 348508
Tweak write_cmake_config.py to also handle variable references looking @FOO@
(matching CMake's configure_file() function), and make it replace '\' 'n' in
values with a newline literal since there's no good portable way of passing a
real newline literal on a command line.
Use that to process all the .def.in files in llvm/include/Config and add
llvm/lib/Target/BUILD.gn, which (indirectly, through llvm-c/Target.h) includes
them.
Differential Revision: https://reviews.llvm.org/D55184
llvm-svn: 348503
VarStreamArray was built on the assumption that it is backed by a
StreamRef, and offset 0 of that StreamRef is the first byte of the first
record in the array.
This is a logical and intuitive assumption, but unfortunately we have
use cases where it doesn't hold. Specifically, a PDB module's symbol
stream is prefixed by 4 bytes containing a magic value, and the first
byte of record data in the array is actually at offset 4 of this byte
sequence.
Previously, we would just truncate the first 4 bytes and then construct
the VarStreamArray with the resulting StreamRef, so that offset 0 of the
underlying stream did correspond to the first byte of the first record,
but this is problematic, because symbol records reference other symbol
records by the absolute offset including that initial magic 4 bytes. So
if another record wants to refer to the first record in the array, it
would say "the record at offset 4".
This led to extremely confusing hacks and semantics in loading code, and
after spending 30 minutes trying to get some math right and failing, I
decided to fix this in the underlying implementation of VarStreamArray.
Now, we can say that a stream is skewed by a particular amount. This
way, when we access a record by absolute offset, we can use the same
values that the records themselves contain, instead of having to do
fixups.
Differential Revision: https://reviews.llvm.org/D55344
llvm-svn: 348499
Initial step towards making the function more generic (and probably move into SelectionDAG).
This is necessary to avoid massive codegen bloat for PR38243 (Add modulo rotate support to LowerRotate).
llvm-svn: 348498
Summary:
If the output of debug directives only is requested, we should drop
emission of ',debug' option from the target directive. Required for
supporting of nvprof profiler.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46061
llvm-svn: 348497
Partial Redundancy Elimination of GEPs prevents CodeGenPrepare from
sinking the addressing mode computation of memory instructions back
to its uses. The problem comes from the insertion of PHIs, which
confuse CGP and make it bail.
I've autogenerated the check lines of an existing test and added a
store instruction to demonstrate the motivation behind this change.
The store is now using the gep instead of a phi.
Differential Revision: https://reviews.llvm.org/D55009
llvm-svn: 348496
Nikita Popov