Commit Graph

24 Commits

Author SHA1 Message Date
Zachary Turner 2f3df6137a iwyu fixes for lldbCore.
This adjusts header file includes for headers and source files
in Core.  In doing so, one dependency cycle is eliminated
because all the includes from Core to that project were dead
includes anyway.  In places where some files in other projects
were only compiling due to a transitive include from another
header, fixups have been made so that those files also include
the header they need.  Tested on Windows and Linux, and plan
to address failures on OSX and FreeBSD after watching the
bots.

llvm-svn: 299714
2017-04-06 21:28:29 +00:00
Zachary Turner 666cc0b291 Move DataBuffer / DataExtractor and friends from Core -> Utility.
llvm-svn: 296943
2017-03-04 01:30:05 +00:00
Zachary Turner 29cb868aa4 Isolate Target-specific functionality of DataExtractor.
In an effort to move the various DataBuffer / DataExtractor
classes from Core -> Utility, we have to separate the low-level
functionality from the higher level functionality.  Only a
few functions required anything other than reading/writing
raw bytes, so those functions are separated out into a
more appropriate area.  Specifically, Dump() and DumpHexBytes()
are moved into free functions in Core/DumpDataExtractor.cpp,
and GetGNUEHPointer is moved into a static function in the
only file that it's referenced from.

Differential Revision: https://reviews.llvm.org/D30560

llvm-svn: 296910
2017-03-03 20:57:05 +00:00
Zachary Turner 6f9e690199 Move Log from Core -> Utility.
All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.

Differential Revision: https://reviews.llvm.org/D30559

llvm-svn: 296909
2017-03-03 20:56:28 +00:00
Zachary Turner 01c3243fc1 Remove dependencies from Utility to Core and Target.
With this patch, the only dependency left is from Utility
to Host.  After this is broken, Utility will finally be
standalone.

Differential Revision: https://reviews.llvm.org/D29909

llvm-svn: 295088
2017-02-14 19:06:07 +00:00
Zachary Turner bf9a77305f Move classes from Core -> Utility.
This moves the following classes from Core -> Utility.

ConstString
Error
RegularExpression
Stream
StreamString

The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes.  So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.

Differential Revision: https://reviews.llvm.org/D29427

llvm-svn: 293941
2017-02-02 21:39:50 +00:00
Zachary Turner c156427ded Don't allow direct access to StreamString's internal buffer.
This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.

Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.

Differential Revision: https://reviews.llvm.org/D26698

llvm-svn: 287152
2016-11-16 21:15:24 +00:00
Zachary Turner 514d8cd83e Update the prompt related functions to use StringRefs.
llvm-svn: 282269
2016-09-23 18:06:53 +00:00
Kate Stone b9c1b51e45 *** This commit represents a complete reformatting of the LLDB source code
*** to conform to clang-format’s LLVM style.  This kind of mass change has
*** two obvious implications:

Firstly, merging this particular commit into a downstream fork may be a huge
effort.  Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit.  The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):

    find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
    find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;

The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.

Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit.  There are alternatives available that will attempt
to look through this change and find the appropriate prior commit.  YMMV.

llvm-svn: 280751
2016-09-06 20:57:50 +00:00
Todd Fiala 759300192a Add StructuredData plugin type; showcase with new DarwinLog feature
Take 2, with missing cmake line fixed.  Build tested on
Ubuntu 14.04 with clang-3.6.

See docs/structured_data/StructuredDataPlugins.md for details.

differential review: https://reviews.llvm.org/D22976

reviewers: clayborg, jingham
llvm-svn: 279202
2016-08-19 04:21:48 +00:00
Todd Fiala a07e4a8352 Revert "Add StructuredData plugin type; showcase with new DarwinLog feature"
This reverts commit 1d885845d1451e7b232f53fba2e36be67aadabd8.

llvm-svn: 279200
2016-08-19 03:03:58 +00:00
Todd Fiala aef7de8492 Add StructuredData plugin type; showcase with new DarwinLog feature
See docs/structured_data/StructuredDataPlugins.md for details.

differential review: https://reviews.llvm.org/D22976

reviewers: clayborg, jingham
llvm-svn: 279198
2016-08-19 02:52:07 +00:00
Greg Clayton 1e20f021f3 Fix some long standing issues that caused tests to be flaky.
The main issues were:
- Listeners recently were converted over to used by getting a shared pointer to a listener. And when they listened to broadcasters they would get a strong reference added to them meaning the listeners would never go away. This caused memory usage to increase and would cause performance issue if many steps were done.
- The lldb_private::Process private state thread had an issue where if a "stop" contol signal was attempted to be sent to that thread, it could end up not responding in 2 seconds and end up getting cancelled which might cause us to cancel a thread that had a mutex locked and it would deadlock the test.

This change makes broadcasters hold onto weak references to listeners. It also fixes some bad threading code that had races inside of it by making the m_events_mutex be non-recursive and getting rid of fragile use of a Predicate<bool> to say that new events are available, and replacing it with using the m_events_mutex with a new m_events_condition to control access to the events in a safer way.

The private state thread now uses a safer way to communicate that the control event has been received by the private state thread: it makes a EventDataReceipt instance that it attaches to the event that sends the control to the private state thread and used this to synchronize the fact that the private state thread has received the event instead of using a Predicate<bool> to convey the info. When the signal event is received, it will pull the event off of the queue in the private state thread and cause the EventData::DoOnRemoval() to be called, which will signal that the event has been received. This cleans up the signal delivery notification so it doesn't rely on a member variable of the process class to convey the info.

std::shared_ptr<EventDataReceipt> event_receipt_sp(new EventDataReceipt());
m_private_state_control_broadcaster.BroadcastEvent(signal, event_receipt_sp);

<rdar://problem/26256353> Listeners are being kept around longer than they should be due to recent changs
<rdar://problem/26256258> Private process state thread can be cancelled and cause deadlocks in test suite

llvm-svn: 269377
2016-05-12 22:58:52 +00:00
Eugene Zelenko a74f37a599 Fix Clang-tidy modernize-use-nullptr warnings in some files in source/Core; other minor fixes.
llvm-svn: 263174
2016-03-10 23:57:12 +00:00
Jim Ingham 583bbb1dd4 Change over the broadcaster/listener process to hold shared or weak pointers
to each other.  This should remove some infrequent teardown crashes when the
listener is not the debugger's listener.

Processes now need to take a ListenerSP, not a Listener&.

This required changing over the Process plugin class constructors to take a ListenerSP, instead
of a Listener&.   Other than that there should be no functional change.
 
<rdar://problem/24580184> CrashTracer: [USER] Xcode at …ework: lldb_private::Listener::BroadcasterWillDestruct + 39

llvm-svn: 262863
2016-03-07 21:50:25 +00:00
Bruce Mitchener 9ccb970f23 Make lldb::endian::InlHostByteOrder() private.
Summary:
Since this is within the lldb namespace, the compiler tries to
export a symbol for it. Unfortunately, since it is inlined, the
symbol is hidden and this results in a mess of warnings when
building on OS X with cmake.

Moving it to the lldb_private namespace eliminates that problem.

Reviewers: clayborg

Subscribers: emaste, lldb-commits

Differential Revision: http://reviews.llvm.org/D14417

llvm-svn: 252396
2015-11-07 04:40:13 +00:00
Saleem Abdulrasool 324a103619 sweep up -Wformat warnings from gcc
This is a purely mechanical change explicitly casting any parameters for printf
style conversion.  This cleans up the warnings emitted by gcc 4.8 on Linux.

llvm-svn: 205607
2014-04-04 04:06:10 +00:00
Greg Clayton 6a3efacc0f Improve the broadcast event dumping.
llvm-svn: 166950
2012-10-29 18:08:18 +00:00
Caroline Tice 969ed3d10f This patch captures and serializes all output being written by the
command line driver, including the lldb prompt being output by
editline, the asynchronous process output & error messages, and
asynchronous messages written by target stop-hooks.

As part of this it introduces a new Stream class,
StreamAsynchronousIO.  A StreamAsynchronousIO object is created with a
broadcaster, who will eventually broadcast the stream's data for a
listener to handle, and an event type indicating what type of event
the broadcaster will broadcast.  When the Write method is called on a
StreamAsynchronousIO object, the data is appended to an internal
string.  When the Flush method is called on a StreamAsynchronousIO
object, it broadcasts it's data string and clears the string.

Anything in lldb-core that needs to generate asynchronous output for
the end-user should use the StreamAsynchronousIO objects.

I have also added a new notification type for InputReaders, to let
them know that a asynchronous output has been written. This is to
allow the input readers to, for example, refresh their prompts and
lines, if desired.  I added the case statements to all the input
readers to catch this notification, but I haven't added any code for
handling them yet (except to the IOChannel input reader).

llvm-svn: 130721
2011-05-02 20:41:46 +00:00
Greg Clayton 7fb56d0a1a Endian patch from Kirk Beitz that allows better cross platform building.
llvm-svn: 124643
2011-02-01 01:31:41 +00:00
Jim Ingham 36f3b369d2 Added support for breakpoint conditions. I also had to separate the "run the expression" part of ClangFunction::Execute from the "Gather the expression result" so that in the case of the Breakpoint condition I can move the condition evaluation into the normal thread plan processing.
Also added support for remembering the "last set breakpoint" so that "break modify" will act on the last set breakpoint.

llvm-svn: 116542
2010-10-14 23:45:03 +00:00
Greg Clayton 471b31ce62 Remove use of STL collection class use of the "data()" method since it isn't
part of C++'98. Most of these were "std::vector<T>::data()" and 
"std::string::data()".

llvm-svn: 108957
2010-07-20 22:52:08 +00:00
Eli Friedman 889669769f Add missing includes.
llvm-svn: 105712
2010-06-09 08:50:27 +00:00
Chris Lattner 30fdc8d841 Initial checkin of lldb code from internal Apple repo.
llvm-svn: 105619
2010-06-08 16:52:24 +00:00