This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
Summary:
I originally set out to move the NameMatches closer to the relevant
function and add some unit tests. However, in the process I've found a
couple of bugs in the implementation:
- the early exits where not always correct:
- (test==pattern) does not mean the match will always suceed because
of regular expressions
- pattern.empty() does not mean the match will fail because the "" is
a valid prefix of any string
So I cleaned up those and added some tests. The only tricky part here
was that regcomp() implementation on darwin did not recognise the empty
string as a regular expression and returned an REG_EMPTY error instead.
The simples fix here seemed to be to replace the empty expression with
an equivalent non-empty one.
Reviewers: clayborg, zturner
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D30094
llvm-svn: 295651
The long-term goal here is to get rid of the functions
GetArgumentAtIndex() and GetQuoteCharAtIndex(), instead
replacing them with operator based access and range-based for
enumeration. There are a lot of callsites, though, so the
changes will be done incrementally, starting with this one.
Differential Revision: https://reviews.llvm.org/D26883
llvm-svn: 287597
This was a bit tricky, especially for things like
OptionValueArray and OptionValueDictionary since they do some
funky string parsing. Rather than try to re-write line-by-line
I tried to make the StringRef usage idiomatic, even though
it meant often re-writing from scratch large blocks of code
in a different way while keeping true to the original intent.
The finished code is a big improvement though, and often much
shorter than the original code. All tests and unit tests
pass on Windows and Linux.
llvm-svn: 287242
This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.
Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.
Differential Revision: https://reviews.llvm.org/D26698
llvm-svn: 287152
I added a "thread-stop-format" to distinguish between the form
that is just the thread info (since the stop printing immediately prints
the frame info) and one with more frame 0 info - which is useful for
"thread list" and the like.
I also added a frame.no-debug boolean to the format entities so you can
print frame information differently between frames with source info and those
without.
This closes https://reviews.llvm.org/D26383.
<rdar://problem/28273697>
llvm-svn: 286288
This is better for a number of reasons. Mostly style, but also:
1) Signed-unsigned comparison warnings disappear since there is
no loop index.
2) Iterating with the range-for style gives you back an entry
that has more than just a const char*, so it's more efficient
and more useful.
3) Makes code safter since the type system enforces that it's
impossible to index out of bounds.
llvm-svn: 283413
This change is very mechanical. All it does is change the
signature of `Options::GetDefinitions()` and `OptionGroup::
GetDefinitions()` to return an `ArrayRef<OptionDefinition>`
instead of a `const OptionDefinition *`. In the case of the
former, it deletes the sentinel entry from every table, and
in the case of the latter, it removes the `GetNumDefinitions()`
method from the interface. These are no longer necessary as
`ArrayRef` carries its own length.
In the former case, iteration was done by using a sentinel
entry, so there was no knowledge of length. Because of this
the individual option tables were allowed to be defined below
the corresponding class (after all, only a pointer was needed).
Now, however, the length must be known at compile time to
construct the `ArrayRef`, and as a result it is necessary to
move every option table before its corresponding class. This
results in this CL looking very big, but in terms of substance
there is not much here.
Differential revision: https://reviews.llvm.org/D24834
llvm-svn: 282188
This patch also marks the const char* versions as =delete to prevent
their use. This has the potential to cause build breakages on some
platforms which I can't compile. I have tested on Windows, Linux,
and OSX. Best practices for fixing broken callsites are outlined in
Args.h in a comment above the deleted function declarations.
Eventually we can remove these =delete declarations, but for now they
are important to make sure that all implicit conversions from
const char * are manually audited to make sure that they do not invoke a
conversion from nullptr.
llvm-svn: 281919
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
easier to scan a set of options with a relatively large number of positional
arguments. This commit standardizes their formatting throughout LLDB and
applies surrounding directives to exempt them from being formatted by
clang-format.
These kinds of exemptions should be rare cases that benefit significantly
from alternative formatting. They also imply a long-term obligation to
maintain their format since the automated tools will not do so.
llvm-svn: 279882
Options used to store a reference to the CommandInterpreter instance
in the base Options class. This made it impossible to parse options
independent of a CommandInterpreter.
This change removes the reference from the base class. Instead, it
modifies the options-parsing-related methods to take an
ExecutionContext pointer, which the options may inspect if they need
to do so.
Closes https://reviews.llvm.org/D23416
Reviewers: clayborg, jingham
llvm-svn: 278440
review it for consistency, accuracy, and clarity. These changes attempt to
address all of the above while keeping the text relatively terse.
<rdar://problem/24868841>
llvm-svn: 275485
Turns out that most of the code that runs expressions (e.g. the ObjC runtime grubber) on
behalf of the expression parser was using the currently selected thread. But sometimes,
e.g. when we are evaluating breakpoint conditions/commands, we don't select the thread
we're running on, we instead set the context for the interpreter, and explicitly pass
that to other callers. That wasn't getting communicated to these utility expressions, so
they would run on some other thread instead, and that could cause a variety of subtle and
hard to reproduce problems.
I also went through the commands and cleaned up the use of GetSelectedThread. All those
uses should have been trying the thread in the m_exe_ctx belonging to the command object
first. It would actually have been pretty hard to get misbehavior in these cases, but for
correctness sake it is good to make this usage consistent.
<rdar://problem/24978569>
llvm-svn: 263326
Batch mode is supposed to stop execution and return control to the user when an
exceptional stop occurs (crash, signal or instrumentation). But attach always stops
with a SIGSTOP on OSX (maybe on Linux too?) which would short circuit the rest of the
commands given.
This change allows a command result object to indicate that it expected to leave the
process stopped with an exceptional stop reason, and it is okay for batch mode to keep going.
<rdar://problem/22243143>
llvm-svn: 257120
The standard remote debugging workflow with gdb is to start the
application on the remote host under gdbserver (e.g.: gdbserver :5039
a.out) and then connect to it with gdb.
The same workflow is supported by debugserver/lldb-gdbserver with a very
similar syntax but to access all features of lldb we need to be
connected also to an lldb-platform instance running on the target.
Before this change this had to be done manually with starting a separate
lldb-platform on the target machine and then connecting to it with lldb
before connecting to the process.
This change modifies the behavior of "platform connect" with
automatically connecting to the process instance if it was started by
the remote platform. With this command replacing gdbserver in a gdb
based worflow is usually as simple as replacing the command to execute
gdbserver with executing lldb-platform.
Differential revision: http://reviews.llvm.org/D14952
llvm-svn: 255016
This change introduce 3 different working mode for Platform::LoadImage
depending on the file specs specified.
* If only a remote file is specified then the remote file is loaded on
the target (same behavior as before)
* If only a local file is specified then the local file is installed to
the current working directory and then loaded from there.
* If both local and remote file is specified then the local file is
installed to the specified location and then loaded from there.
The same options are exposed on the SB API with a new method LoadImage
method while the old signature presers its meaning.
On the command line the installation of the shared library can be specified
with the "--install" option of "process load".
Differential revision: http://reviews.llvm.org/D15152
llvm-svn: 255014
On android the symbols exposed by libdl (dlopen, dlclose, dlerror)
prefixed by "__dl_". This change moves the handling of process
load/unload to the platform object and override it for android to
handle the special prefix.
Differential revision: http://reviews.llvm.org/D11465
llvm-svn: 254504
Summary:
This removes all uses of virtual on functions
where override could be used, including on destructors.
It also adds override where virtual was previously
missing.
Reviewers: clayborg, labath
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13503
llvm-svn: 249564
Existing commands supplying this type of help content have been reworked to take advantage of the changes. In addition to formatting changes, content was changes for accuracy and clarity purposes.
<rdar://problem/21269977>
llvm-svn: 242122
Summary:
- Consolidate Unix signals selection in UnixSignals.
- Make Unix signals available from platform.
- Add jSignalsInfo packet to retrieve Unix signals from remote platform.
- Get a copy of the platform signal for each remote process.
- Update SB API for signals.
- Update signal utility in test suite.
Reviewers: ovyalov, clayborg
Subscribers: chaoren, jingham, labath, emaste, tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11094
llvm-svn: 242101
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
Summary:
There is an issue in lldb where the command prompt can appear at the wrong time. The partial fix
we have in for this is not working all the time and is introducing unnecessary delays. This
change does:
- Change Process:SyncIOHandler to use integer start id's for synchronization to avoid it being
confused by quick start-stop cycles. I picked this up from a suggested patch by Greg to
lldb-dev.
- coordinates printing of asynchronous text with the iohandlers. This is also based on a
(different) Greg's patch, but I have added stronger synchronization to it to avoid races.
Together, these changes solve the prompt problem for me on linux (both with and without libedit).
I think they should behave similarly on Mac and FreeBSD and I think they will not make matters
worse for windows.
Test Plan: Prompt comes out alright. All tests still pass on linux.
Reviewers: clayborg, emaste, zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9823
llvm-svn: 238313
This works for Python commands defined via a class (implement get_flags on your class) and C++ plugin commands (which can call SBCommand::GetFlags()/SetFlags())
Flags allow features such as not letting the command run if there's no target, or if the process is not stopped, ...
Commands could always check for these things themselves, but having these accessible via flags makes custom commands more consistent with built-in ones
llvm-svn: 238286
Summary: This enables correct handling of real time signals by lldb.
Test Plan: Added a test that verifies handling of SIGRTMIN
Reviewers: tberghammer, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9911
llvm-svn: 238009
Summary: This patch moves synchronization of iohandler to CommandObjectProcessLaunch::DoExecute like it was done in CommandObjectProcessContinue::DoExecute.
Reviewers: jingham, clayborg
Reviewed By: clayborg
Subscribers: lldb-commits, clayborg, jingham
Differential Revision: http://reviews.llvm.org/D9373
llvm-svn: 236699
follow-up to the change in r235158. Right now if you attach to
a process and type "kill", lldb doesn't kill it, it detaches.
<rdar://problem/20691198>
llvm-svn: 236363
the changes in r233255/r233258. Normally if lldb attaches to
a running process, when we call Process::Destroy, we want to detach
from the process. If lldb launched the process itself, ::Destroy
should kill it.
However, if we attach to a process and the driver calls SBProcess::Kill()
(which calls Destroy), we need to kill it even if we didn't launch it
originally.
The force_kill param allows for the SBProcess::Kill method to force the
behavior of Destroy.
<rdar://problem/20424439>
llvm-svn: 235158
Summary:
This patch adds -exec-arguments command for lldb-mi. -exec-arguments command allows to specify arguments for executable file in MI mode. Also it contains tests for that command.
Btw, new added files was formatted by clang-format.
Reviewers: abidh, zturner, clayborg
Reviewed By: clayborg
Subscribers: zturner, emaste, clayborg, jingham, lldb-commits
Differential Revision: http://reviews.llvm.org/D6965
llvm-svn: 229110
The refactor was motivated by some comments that Greg made
http://reviews.llvm.org/D6918
and also to break a dependency cascade that caused functions linking
in string->int conversion functions to pull in most of lldb
llvm-svn: 226199
Summary:
If a stream contains an empty string, no need to append it to the output
(otherwise we end up with a blank line). Also, no need to print a status
message when the state changes to connected, as this string brings no
information -- "Process 0" does not mean anything to the user, and the
process being connected has no meaning either.
Test Plan:
Connect to a remote linux platform mode daemon with `platform select
remote-linux` followed by `platform connect ...`, create a target and
run it, observe the output. Also, run the full test suite (dosep.py).
Before:
(lldb) [...] connect, etc.
(lldb) r
Process 0 connected
Process 5635 launched: '/Users/sas/Source/test' (x86_64)
Process 5635 stopped
After:
(lldb) [...] connect, etc.
(lldb) r
Process 5635 launched: '/Users/sas/Source/test' (x86_64)
Process 5635 stopped
Reviewers: tfiala, vharron, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D6593
llvm-svn: 224188
Fixed include:
- Change Platform::ResolveExecutable(...) to take a ModuleSpec instead of a FileSpec + ArchSpec to help resolve executables correctly when we have just a path + UUID (no arch).
- Add the ability to set the listener in SBLaunchInfo and SBAttachInfo in case you don't want to use the debugger as the default listener.
- Modified all places that use the SBLaunchInfo/SBAttachInfo and the internal ProcessLaunchInfo/ProcessAttachInfo to not take a listener as a parameter since it is in the launch/attach info now
- Load a module's sections by default when removing a module from a target. Since we create JIT modules for expressions and helper functions, we could end up with stale data in the section load list if a module was removed from the target as the section load list would still have entries for the unloaded module. Target now has the following functions to help unload all sections a single or multiple modules:
size_t
Target::UnloadModuleSections (const ModuleList &module_list);
size_t
Target::UnloadModuleSections (const lldb::ModuleSP &module_sp);
llvm-svn: 222167
There were many issues with synchronous mode that we discovered when started to try and add a "batch" mode. There was a race condition where the event handling thread might consume events when in sync mode and other times the Process::WaitForProcessToStop() would consume them. This also led to places where the Process IO handler might or might not get popped when it needed to be.
llvm-svn: 220254
This change modifies the 'process launch' --disable-aslr option to take a boolean argument. If the user directly specifies --disable-aslr {true,false}, that setting will control whether the process is launched with ASLR disabled accordingly. In the event that the setting is not explicitly made on the process launch command line, then the value is retrieved from the target.disable-aslr setting (i.e. settings show target.disable-aslr).
llvm-svn: 215996
This reverses out the options validators changes. We'll get these
back in once the changes to the output can be resolved.
Restores broken tests on FreeBSD, Linux, MacOSX.
Changes reverted: r212500, r212317, r212290.
llvm-svn: 212543
Zachary Turner