It is not a good idea to expose raw constants in the LLVM C API. Replace this with an explicit getter.
Differential Revision: https://reviews.llvm.org/D88367
Previous description didn't actually state the effect the attribute has on
thread safety analysis (causing analysis to assume the capability is held).
Previous description was also ambiguous about (or slightly overstated) the
noreturn assumption made by thread safety analysis, implying the assumption had
to be true about the function's behavior in general, and not just its behavior
in places where it's used. Stating the assumption specifically should avoid a
perceived need to disable thread safety analysis in places where only asserting
that a specific capability is held would be better.
Reviewed By: aaronpuchert, vasild
Differential Revision: https://reviews.llvm.org/D87629
SAVE statement, according to 8.6.14, must apply to the same scoping
unit, that excludes nested scoping units. For example, if the SAVE
statement is found in a MODULE, the functions contained in that module
should not inherit the SAVE attribute. I think that the code was doing
this, failing the following source:
```
MODULE pippo
SAVE
CONTAINS
PURE FUNCTION fft_stick_index( )
IMPLICIT NONE
INTEGER :: fft_stick_index
INTEGER :: mc !error: A pure subprogram may not have a variable with the SAVE attribute
END FUNCTION
END MODULE
```
Differential Revision: https://reviews.llvm.org/D88279
There appears to be a mis-compile with MemorySSA-backed DSE in
combination with llvm.lifetime.end. It currently appears like
DSE is doing the right thing and the llvm.lifetime.end markers
are incorrect. The reverted patch uncovers the mis-compile.
This patch temporarily switches back to the legacy DSE
implementation, while we investigate.
This reverts commit 9d172c8e9c.
If we're multiplying all elements of a vector by '0' or '1' then we can more efficiently perform this as a clearing mask (that is likely to further simplify to a shuffle blend).
This was noticed when reviewing D87502 but seems to help idiv/irem by constant cases even more as '0'/'1' values are often used for 'passthrough' cases.
Differential Revision: https://reviews.llvm.org/D88225
When looking for memory defs killed by memory terminators the code
currently incorrectly ignores the size argument of llvm.lifetime.end.
This patch updates the code to use isMemTerminator and updates
isMemTerminator to use isOverwrite() to make sure locations that are
outside the range marked as dead by llvm.lifetime.end are not
considered. Note that isOverwrite is only used for llvm.lifetime.end,
because free-like functions make the whole underlying object dead.
llvm.lifetime.end accepts a size parameters to limit the size of the
location marked as dead. Add a few tests with stores to locations after
the part that has been marked as dead.
The change implements evaluation of constant floating point expressions
under non-default rounding modes. The main objective was to support
evaluation of global variable initializers, where constant rounding mode
may be specified by `#pragma STDC FENV_ROUND`.
Differential Revision: https://reviews.llvm.org/D87822
This is a fix for PR47630. The regression is caused by the D78011. After
this change the code starts to call the `emitGlobalConstantLargeInt` even
for constants which requires eight bytes to store.
Differential revision: https://reviews.llvm.org/D88261
This is like FastMathFlagGuard in IR. Since we use SDAG instance to get
values, it's with SelectionDAG. By creating a FlagInserter in current
scope, all values created by getNode will get the flags if no Flags
argument provided.
In this patch, I applied it to floating point operations folding part in
DAG combiner, and removed Flags passing to getNode to show its effect.
Other places in DAG combiner and other helper methods similar to getNode
also need this. They can be done in follow-up patches.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D87361
Previously for nowait target, CG emitted a function call to `__tgt_target_nowait`, etc. However, in OpenMP RTL, these functions just directly call the no-nowait version, which means nowait is not working as expected.
OpenMP specification says a target is acutally a target task, which is an untied and detachable task. It is natural to go to the direction that generates a task for a nowait target. However, OpenMP task has a problem that it must be within to a parallel region; otherwise the task will be executed immediately. As a result, if we directly wrap to a regular task, the `target nowait` outside of a parallel region is still a synchronous version.
In D77609, I added the support for unshackled task in OpenMP RTL. Basically, unshackled task is a task that is not bound to any parallel region. So all nowait target will be tranformed into an unshackled task. In order to distinguish from regular task, a new flag bit is set for unshackled task. This flag will be used by RTL for later process.
Since all target tasks are allocated via `__kmpc_omp_target_task_alloc`, and in current `libomptarget`, `__kmpc_omp_target_task_alloc` just calls `__kmpc_omp_task_alloc`. Therefore, we can modify the flag in `__kmpc_omp_target_task_alloc` so that we don't need to modify the FE too much. If users choose to opt out the feature, they just need to use a RTL w/o support of unshackled threads.
As a result, in this patch, the `target nowait` region is simply wrapped into a regular task. Later once we have RTL support for unshackled tasks, the wrapped tasks can be executed by unshackled threads w/o changes in the FE.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D78075
Even if the type is s8/s16, assigning to gpr is preferable with constants because
worst case we can select via a constant pool load, and without cross-bank copies
to the FPR bank more patterns can be imported later.
This matches the legacy PM pass by having one constructor use command
line flags, and the other use parameters to the pass.
This fixes all tests under Transforms/LowerTypeTests using NPM.
Reviewed By: ychen, pcc
Differential Revision: https://reviews.llvm.org/D87845
This patch performs a minor cleanup of the class Slice:
static methods and constructors which take a pointer but assume that
it's not null now take the argument by reference.
NFC.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D88320
This is a patch to LangRef that clarifies the behavior of load/store/memset/memcpy/memmove when the pointers or sizes are not well-defined
as well.
MSan detects a case when e.g., only lower bits of address are garbage when `-msan-check-access-address` is enabled, and it does not directly conflict with this patch because a C program should not use a pointer with undef bits and reasonable optimizations do not convert a well-defined pointer into a pointer with undef bits.
This patch contains a definition of a well-defined value as well.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D87994
This commit fixes a regression (from LLVM 10 to LLVM 11 RC3) in the LLVM
C API.
Previously, commit 1ee6ec2bf removed the mask operand from the
ShuffleVector instruction, storing the mask data separately in the
instruction instead; this reduced the number of operands of
ShuffleVector from 3 to 2. AFAICT, this change unintentionally caused
a regression in the LLVM C API. Specifically, it is no longer possible
to get the mask of a ShuffleVector instruction through the C API. This
patch introduces new functions which together allow a C API user to get
the mask of a ShuffleVector instruction, restoring the functionality
which was previously available through LLVMGetOperand().
This patch also adds tests for this change to the llvm-c-test
executable, which involved adding support for InsertElement,
ExtractElement, and ShuffleVector itself (as well as constant vectors)
to echo.cpp. Previously, vector operations weren't tested at all in
echo.ll.
I also fixed some typos in comments and help-text nearby these changes,
which I happened to spot while developing this patch. Since the typo
fixes are technically unrelated other than being in the same files, I'm
happy to take them out if you'd rather they not be included in the patch.
Differential Revision: https://reviews.llvm.org/D88190
The intrinsics don't have any pointer arguments, so "argmemonly" makes
optimizations think they don't write to memory at all.
Differential Revision: https://reviews.llvm.org/D88186
This attribute allows declarations to be restricted to the framework
itself, enabling Swift to remove the declarations when importing
libraries. This is useful in the case that the functions can be
implemented in a more natural way for Swift.
This is based on the work of the original changes in
8afaf3aad2
Differential Revision: https://reviews.llvm.org/D87720
Reviewed By: Aaron Ballman
When a Mach-O corefile has an LC_NOTE "main bin spec" for a
standalone binary / firmware, with only a UUID and no load
address, try to locate the binary and dSYM by UUID and if
found, load it at offset 0 for the user.
Add a test case that tests a firmware/standalone corefile
with both the "kern ver str" and "main bin spec" LC_NOTEs.
<rdar://problem/68193804>
Differential Revision: https://reviews.llvm.org/D88282
Craig Topper