This patch adds a new property: isInsertSubreg and the related target hooks:
TargetIntrInfo::getInsertSubregInputs and
TargetInstrInfo::getInsertSubregLikeInputs to specify that a target specific
instruction is a (kind of) INSERT_SUBREG.
The approach is similar to r215394.
<rdar://problem/12702965>
llvm-svn: 216139
This patch adds a new property: isExtractSubreg and the related target hooks:
TargetIntrInfo::getExtractSubregInputs and
TargetInstrInfo::getExtractSubregLikeInputs to specify that a target specific
instruction is a (kind of) EXTRACT_SUBREG.
The approach is similar to r215394.
<rdar://problem/12702965>
llvm-svn: 216130
Implement `uselistorder` and `uselistorder_bb` assembly directives,
which allow the use-list order to be recovered when round-tripping to
assembly.
This is the bulk of PR20515.
llvm-svn: 216025
ARM in particular is getting dangerously close to exceeding 32 bits worth of
possible subtarget features. When this happens, various parts of MC start to
fail inexplicably as masks get truncated to "unsigned".
Mostly just refactoring at present, and there's probably no way to test.
llvm-svn: 215887
Summary:
This patch changes the way xfail and unsupported tests are displayed.
This output is only displayed when the --show-unsupported/--show-xfail flags are passed to lit.
Currently xfail/unsupported tests are printed during the run of the test-suite. I think its better to display this information during the summary instead.
This patch removes the printing of these tests from when they are run to the summary.
Reviewers: ddunbar, EricWF
Reviewed By: EricWF
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4842
llvm-svn: 215809
Add header guards to files that were missing guards. Remove #endif comments
as they don't seem common in LLVM (we can easily add them back if we decide
they're useful)
Changes made by clang-tidy with minor tweaks.
llvm-svn: 215558
Especially with blends and large tree heights there was a problem with
the fuzzer where it would end up with enough undef shuffle elements in
enough parts of the tree that in a birthday-attack kind of way we ended
up regularly having large numbers of undef elements in the result. I was
seeing reasonably frequent cases of *all* results being undef which
prevents us from doing any correctness checking at all. While having
undef lanes is important, this was too much.
So I've tried to apply some math to the probabilities of having an undef
lane and balance them against the tree height. Please be gentle, I'm
really terrible at math. I probably made a bunch of amateur mistakes
here. Fixes, etc. are quite welcome. =D At least in running it some, it
seems to be producing more interesting (for correctness testing)
results.
llvm-svn: 215540
a tree of inputs to blend iteratively together.
This required a pretty substantial rewrite of the innards. The number of
shuffle instructions is now bounded in terms of tree-height. There is
a flag to disable blends so that its still possible to test single input
shuffles. I've also improved various aspects of how the test program is
generated, primarily to simplify the test harness and allow some
optimizations to clean up how we actually check the results and build up
the inputs.
Again, apologies for my likely horrible use of Python... But hey, it
works! (Ish?)
llvm-svn: 215530
This patch adds a new property: isRegSequence and the related target hooks:
TargetIntrInfo::getRegSequenceInputs and
TargetInstrInfo::getRegSequenceLikeInputs to specify that a target specific
instruction is a (kind of) REG_SEQUENCE.
<rdar://problem/12702965>
llvm-svn: 215394
be deleted. This will be reapplied as soon as possible and before
the 3.6 branch date at any rate.
Approved by Jim Grosbach, Lang Hames, Rafael Espindola.
This reverts commits r215111, 215115, 215116, 215117, 215136.
llvm-svn: 215154
Currently FileCheck errors out on empty input. This is usually the
right thing to do, but makes testing things like "this command does
not emit some error message" hard to test. This usually leads to
people using "command 2>&1 | count 0" instead, and then the bots that
use guard malloc fail a few hours later.
By adding a flag to FileCheck that allows empty inputs, we can make
tests that consist entirely of "CHECK-NOT" lines feasible.
llvm-svn: 215127
I am sure we will be finding bits and pieces of dead code for years to
come, but this is a good start.
Thanks to Lang Hames for making MCJIT a good replacement!
llvm-svn: 215111
within a single bit-width of vectors. This is particularly useful for
when you know you have bugs in a certain area and want to find simpler
test cases than those produced by an open-ended fuzzing that ends up
legalizing the vector in addition to shuffling it.
llvm-svn: 215056
This is a python script which for a given seed generates a random
sequence of random shuffles of a random vector width. It embeds this
into a function and emits a main function which calls the test routine
and checks that the results (where defined) match the obvious results.
I'll be using this to drive out miscompiles from the new vector shuffle
logic now that it is clean of any crashes I can find with llvm-stress.
Note, my python skills are very poor. Sorry if this is terrible code,
and feel free to tell me how I should write this or just patch it as
necessary.
The tests generated try to be very portable and use boring C routines.
It technically will mis-declare the C routines and pass 32-bit integers
to parametrs that expect 64-bit integers. If someone wants to fix this
and has less terrible ideas of how to do it, I'm all ears. Fortunately,
this "just works" for x86. =]
llvm-svn: 215054
to get the subtarget and that's accessible from the MachineFunction
now. This helps clear the way for smaller changes where we getting
a subtarget will require passing in a MachineFunction/Function as
well.
llvm-svn: 214988
This is something that I have found to be very useful in my work and I
wanted to contribute it back to the community since several people in
the past have asked me for something along these lines. (Jakob, I know
this has been a while coming ; )]
The way you use this is you create a script that takes in as its first
argument a count. The script passes into LLVM the count via a command
line flag that disables a pass after LLVM has run after the pass has
run for count number of times. Then the script invokes a test of some
sort and indicates whether LLVM successfully compiled the test via the
scripts exit status. Then you invoke bisect as follows:
bisect --start=<start_num> --end=<end_num> ./script.sh "%(count)s"
And bisect will continually call ./script.sh with various counts using
the exit status to determine success and failure.
llvm-svn: 214610
Summary:
This patch add a --show-xfail flag. If this flag is specified then each xfail test will be printed to output.
When it is not given xfail tests are ignored. Ignoring xfail tests is the current behavior.
This flag is meant to mirror the --show-unsupported flag that was recently added.
Reviewers: ddunbar, EricWF
Reviewed By: EricWF
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4750
llvm-svn: 214609
This is useful for cases when stand-alone patterns are preferred to the
patterns included in the instruction definitions. Instead of requiring
that stand-alone patterns set a larger AddedComplexity value, which
can be confusing to new developers, the allows us to reduce the
complexity of the included patterns to achieve the same result.
There will be test cases for this added to the R600 backend in a
future commit.
llvm-svn: 214466
This allows assembling the two new instructions, encls and enclu for the
SKX processor model.
Note the diffs are a bigger than what might think, but to fit the new
MRM_CF and MRM_D7 in things in the right places things had to be
renumbered and shuffled down causing a bit more diffs.
rdar://16228228
llvm-svn: 214460
address of the stack guard was being spilled to the stack.
Previously the address of the stack guard would get spilled to the stack if it
was impossible to keep it in a register. This patch introduces a new target
independent node and pseudo instruction which gets expanded post-RA to a
sequence of instructions that load the stack guard value. Register allocator
can now just remat the value when it can't keep it in a register.
<rdar://problem/12475629>
llvm-svn: 213967
file not in the test/ area). Backing out now so that this test isn't part of
the 3.5 branch.
Original commit message: "TableGen: Allow AddedComplexity values to be negative
[...]"
llvm-svn: 213596
This is useful for cases when stand-alone patterns are preferred to the
patterns included in the instruction definitions. Instead of requiring
that stand-alone patterns set a larger AddedComplexity value, which
can be confusing to new developers, the allows us to reduce the
complexity of the included patterns to achieve the same result.
llvm-svn: 213521
It's also possible to just write "= nullptr", but there's some question
of whether that's as readable, so I leave it up to authors to pick which
they prefer for now. If we want to discuss standardizing on one or the
other, we can do that at some point in the future.
llvm-svn: 213438
Speculative fix for a -Wframe-larger-than warning from gcc. Clang will
implicitly promote such constant arrays to globals, so in theory it
won't hit this.
llvm-svn: 213298
There are two parts here. First is to modify tablegen to adjust the encoding
type ENCODING_RM with the scaling factor.
The second is to use the new encoding types to compute the correct
displacement in the decoder.
Fixes <rdar://problem/17608489>
llvm-svn: 213281
Refactoring; no functional changes intended
Removed PostRAScheduler bits from subtargets (X86, ARM).
Added PostRAScheduler bit to MCSchedModel class.
This bit is set by a CPU's scheduling model (if it exists).
Removed enablePostRAScheduler() function from TargetSubtargetInfo and subclasses.
Fixed the existing enablePostMachineScheduler() method to use the MCSchedModel (was just returning false!).
Added methods to TargetSubtargetInfo to allow overrides for AntiDepBreakMode, CriticalPathRCs, and OptLevel for PostRAScheduling.
Added enablePostRAScheduler() function to PostRAScheduler class which queries the subtarget for the above values.
Preserved existing scheduler behavior for ARM, MIPS, PPC, and X86:
a. ARM overrides the CPU's postRA settings by enabling postRA for any non-Thumb or Thumb2 subtarget.
b. MIPS overrides the CPU's postRA settings by enabling postRA for everything.
c. PPC overrides the CPU's postRA settings by enabling postRA for everything.
d. X86 is the only target that actually has postRA specified via sched model info.
Differential Revision: http://reviews.llvm.org/D4217
llvm-svn: 213101
Summary:
Add FileCheck -implicit-check-not option which allows specifying a
pattern that should only occur in the input when explicitly matched by a
positive check. This feature allows checking tool diagnostics in a way
clang -verify does it for compiler diagnostics.
The option has been tested on a number of clang-tidy checks, I'll post a link to
the clang-tidy patch to this thread.
Once there's an agreement on the general direction, I can add tests and
documentation.
Reviewers: djasper, bkramer
Reviewed By: bkramer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4462
llvm-svn: 212810
Use 0 for the invalid buffer instead of -1/~0 and switch to unsigned
representation to enable more idiomatic usage.
Also introduce a trivial SourceMgr::getMainFileID() instead of hard-coding 0/1
to identify the main file.
llvm-svn: 212398
Add MSBuiltin which is similar in vein to GCCBuiltin. This allows for adding
intrinsics for Microsoft compatibility to individual instructions. This is
needed to permit the creation of ARM specific MSVC extensions.
This is not currently in use, and requires an associated change in clang to
enable use of the intrinsics defined by this new class. This merely sets the
LLVM portion of the infrastructure in place to permit the use of this
functionality. A separate set of changes will enable the new intrinsics.
llvm-svn: 212350
string_ostream is a safe and efficient string builder that combines opaque
stack storage with a built-in ostream interface.
small_string_ostream<bytes> additionally permits an explicit stack storage size
other than the default 128 bytes to be provided. Beyond that, storage is
transferred to the heap.
This convenient class can be used in most places an
std::string+raw_string_ostream pair or SmallString<>+raw_svector_ostream pair
would previously have been used, in order to guarantee consistent access
without byte truncation.
The patch also converts much of LLVM to use the new facility. These changes
include several probable bug fixes for truncated output, a programming error
that's no longer possible with the new interface.
llvm-svn: 211749
Sometimes we want to install things in "standard" locations and the
flavor directories interfere with that. Add an option to keep them
out of the install path.
llvm-svn: 211300
It was pointed out that this breaks the "virtual test discovery"
mechanism, which allows for narming tests in the test exec root.
Reverting until I can figure out how to fix this.
llvm-svn: 211048
We don't map these windows errors to generic ones since errc::timed_out is
not defined on mingw. Just use the raw windows error value.
llvm-svn: 210910
The idea of this patch is to turn llvm/Support/system_error.h into a
transitional header that just brings in the erorr_code api to the llvm
namespace. I will remove it shortly afterwards.
The cases where the general idea needed some tweaking:
* std::errc is a namespace in msvc, so we cannot use "using std::errc". I could
add an #ifdef, but there were not that many uses, so I just added std:: to
them in this patch.
* Template specialization had to be moved to the std namespace in this
patch set already.
* The msvc implementation of default_error_condition doesn't seem to
provide the same transformations as we need. Not too surprising since
the standard doesn't actually say what "equivalent" means. I fixed the
problem by keeping our old mapping and using it at error_code
construction time.
Despite these shortcomings I think this is still a good thing. Some reasons:
* The different implementations of system_error might improve over time.
* It removes 925 lines of code from llvm already.
* It removes 6313 bytes from the text segment of the clang binary when
it is built with gcc and 2816 bytes when building with clang and
libstdc++.
llvm-svn: 210687
MSVC doesn't seem to provide any is_error_code_enum enumeration for the
windows errors.
Fortunately very few places in llvm have to handle raw windows errors, so
we can just construct the corresponding error_code directly.
llvm-svn: 210631
It would previously say things like
warning: input 'test/Frontend/foo.c' contained no tests
and have the user pull their hair trying to figure out what's wrong with that
file. This patch changes the message to the much clearer:
warning: no such file or directory: 'test/Frontend/foo.c'
Differential Revision: http://reviews.llvm.org/D4097
llvm-svn: 210597
Clang's lit cfg already detects the currently selected SDK via
"xcrun --show-sdk-path". The same thing should be done for compiler-rt tests,
to make them work on recent OS X versions. Instead of duplicating the detection
code, this patch extracts the detection function into a lit.util method.
Patch by Kuba Brecka (kuba.brecka@gmail.com),
reviewed at http://reviews.llvm.org/D4072
llvm-svn: 210534
inverted condition codes (CINC, CINV, CNEG, CSET, and CSETM).
Matching aliases based on "immediate classes", when disassembling,
wasn't previously supported, hence adding MCOperandPredicate
into class Operand, and implementing the support for it
in AsmWriterEmitter.
The parsing for those aliases was already custom, so just adding
the missing condition into AArch64AsmParser::parseCondCode.
llvm-svn: 210528
I saw at least a memory leak or two from inspection (on probably
untested error paths) and r206991, which was the original inspiration
for this change.
I ran this idea by Jim Grosbach a few weeks ago & he was OK with it.
Since it's a basically mechanical patch that seemed sufficient - usual
post-commit review, revert, etc, as needed.
llvm-svn: 210427
This changes ARM64 to use separate operands for each component of an
address, and look for separate '[', '$Rn, ..., ']' tokens when
parsing.
This allows us to do away with quite a bit of special C++ code to
handle monolithic "addressing modes" in the MC components. The more
incremental matching of the assembler operands also allows for better
diagnostics when LLVM is presented with invalid input.
Most of the complexity here is with the register-offset instructions,
which were extremely dodgy beforehand: even when the instruction used
wM, LLVM's model had xM as an operand. We papered over this
discrepancy before, but that approach doesn't work now so I split them
into separate X and W variants.
llvm-svn: 209425
Summary:
The minimal type needs to hold a value of '1ULL << 31' but
getMinimalTypeForRange() is called with a value of '1ULL << 32'.
This patch will also reduce the size of the matcher table when there are 8
or 16 SubtargetFeatures.
Also added a dump of the SubtargetFeatures to the -debug output and corrected getMinimalTypeInRange() to consider 0xffffffffull to be a 32-bit value.
The testcase is that no existing code is broken and that LLVM still successfully
compiles after adding MIPS64r6 CodeGen support.
Reviewers: rafael
Reviewed By: rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3787
llvm-svn: 209288
This allows the results of a ComplexPattern check to be distributed to separate
named Operands, instead of the current system where all results must apply (and
match perfectly) with a single Operand.
For example, if "some_addrmode" is a ComplexPattern producing two results, you
can write:
def : Pat<(load (some_addrmode GPR64:$base, imm:$offset)),
(INST GPR64:$base, imm:$offset)>;
This should allow neater instruction definitions in TableGen that don't put all
possible aspects of addressing into a single operand, but are still usable with
relatively simple C++ CodeGen idioms.
llvm-svn: 209206
When multiple aliases overlap, the correct string to print can often be
determined purely by considering the InstAlias declarations in some particular
order. This allows the user to specify that order manually when desired,
without resorting to hacking around with the default lexicographical order on
Record instantiation, which is error-prone and ugly.
I was also mistaken about "add w2, w3, w4" being the same as "add w2, w3, w4,
uxtw". That's only true if Rn is the stack pointer.
llvm-svn: 209199
TableGen has a fairly dubious heuristic to decide whether an alias should be
printed: does the alias have lest operands than the real instruction. This is
bad enough (particularly with no way to override it), but it should at least be
calculated consistently for both strings.
This patch implements that logic: first get the *correct* string for the
variant, in the same way as the Matcher, without guessing; then count the
number of whitespace chars.
There are basically 4 changes this brings about after the previous
commits; all of these appear to be good, so I have changed the tests:
+ ARM64: we print "neg X, Y" instead of "sub X, xzr, Y".
+ ARM64: we skip implicit "uxtx" and "uxtw" modifiers.
+ Sparc: we print "mov A, B" instead of "or %g0, A, B".
+ Sparc: we print "fcmpX A, B" instead of "fcmpX %fcc0, A, B"
llvm-svn: 208969
Previously, TableGen assumed that every aliased operand consumed precisely 1
MachineInstr slot (this was reasonable because until a couple of days ago,
nothing more complicated was eligible for printing).
This allows a couple more ARM64 aliases to print so we can remove the special
code.
On the X86 side, I've gone for explicit AT&T size specifiers as the default, so
turned off a few of the aliases that would have just started printing.
llvm-svn: 208880
The old method used by X86TTI to determine partial-unrolling thresholds was
messy (because it worked by testing target features), and also would not
correctly identify the target CPU if certain target features were disabled.
After some discussions on IRC with Chandler et al., it was decided that the
processor scheduling models were the right containers for this information
(because it is often tied to special uop dispatch-buffer sizes).
This does represent a small functionality change:
- For generic x86-64 (which uses the SB model and, thus, will get some
unrolling).
- For AMD cores (because they still currently use the SB scheduling model)
- For Haswell (based on benchmarking by Louis Gerbarg, it was decided to bump
the default threshold to 50; we're working on a test case for this).
Otherwise, nothing has changed for any other targets. The logic, however, has
been moved into BasicTTI, so other targets may now also opt-in to this
functionality simply by setting LoopMicroOpBufferSize in their processor
model definitions.
llvm-svn: 208289
behavior based on other files defining DEBUG_TYPE, which means it cannot
define DEBUG_TYPE at all. This is actually better IMO as it forces folks
to define relevant DEBUG_TYPEs for their files. However, it requires all
files that currently use DEBUG(...) to define a DEBUG_TYPE if they don't
already. I've updated all such files in LLVM and will do the same for
other upstream projects.
This still leaves one important change in how LLVM uses the DEBUG_TYPE
macro going forward: we need to only define the macro *after* header
files have been #include-ed. Previously, this wasn't possible because
Debug.h required the macro to be pre-defined. This commit removes that.
By defining DEBUG_TYPE after the includes two things are fixed:
- Header files that need to provide a DEBUG_TYPE for some inline code
can do so by defining the macro before their inline code and undef-ing
it afterward so the macro does not escape.
- We no longer have rampant ODR violations due to including headers with
different DEBUG_TYPE definitions. This may be mostly an academic
violation today, but with modules these types of violations are easy
to check for and potentially very relevant.
Where necessary to suppor headers with DEBUG_TYPE, I have moved the
definitions below the includes in this commit. I plan to move the rest
of the DEBUG_TYPE macros in LLVM in subsequent commits; this one is big
enough.
The comments in Debug.h, which were hilariously out of date already,
have been updated to reflect the recommended practice going forward.
llvm-svn: 206822
Removes some extra manual dynamic memory allocation/management. It does
get a bit quirky having to make State's members mutable and
pointers/references to const rather than non-const, but that's a
necessary workaround to dealing with the std::set elements.
llvm-svn: 206807
entirely clear whether this should be valid with modules enabled, but the fixed
code is cleaner regardless.
Also fix a TU-local type that accidentally had external linkage.
llvm-svn: 206714
Setting this parameter enables llvm-lit to run on source directories for
compiler-rt test suites that implement magic in their lit.cfg.
<rdar://problem/16458307>
llvm-svn: 205262
This adds a second implementation of the AArch64 architecture to LLVM,
accessible in parallel via the "arm64" triple. The plan over the
coming weeks & months is to merge the two into a single backend,
during which time thorough code review should naturally occur.
Everything will be easier with the target in-tree though, hence this
commit.
llvm-svn: 205090
This is like the LLVMMatchType, except the verifier checks that the
second argument is a vector with the same base type and half the
number of elements.
This will be used by the ARM64 backend.
llvm-svn: 205079
These are used in the ARM backends to aid type-checking on patterns involving
intrinsics. By making sure one argument is an extended/truncated version of
another.
However, there's no reason to limit them to just vectors types. For example
AArch64 has the instruction "uqshrn sD, dN, #imm" which would naturally use an
intrinsic taking an i64 and returning an i32.
llvm-svn: 205003
When an instruction's operand list does not have a sufficient number of
operands to match with all of the variables that contribute to its
encoding, instead of asserting inside a call to getSubOperandNumber, produce an
informative error.
llvm-svn: 204542
The "noduplicate" function attribute exists to prevent certain optimizations
from duplicating calls to the function. This is important on platforms where
certain function call duplications are unsafe (for example execution barriers
for CUDA and OpenCL).
This patch makes it possible to specify intrinsics as "noduplicate" and
translates that to the appropriate function attribute.
llvm-svn: 204200
Utilize the previous move of MVT to a separate header for all trivial
cases (that don't need any further restructuring).
Reviewed By: Tim Northover
llvm-svn: 204003
These linkages were introduced some time ago, but it was never very
clear what exactly their semantics were or what they should be used
for. Some investigation found these uses:
* utf-16 strings in clang.
* non-unnamed_addr strings produced by the sanitizers.
It turns out they were just working around a more fundamental problem.
For some sections a MachO linker needs a symbol in order to split the
section into atoms, and llvm had no idea that was the case. I fixed
that in r201700 and it is now safe to use the private linkage. When
the object ends up in a section that requires symbols, llvm will use a
'l' prefix instead of a 'L' prefix and things just work.
With that, these linkages were already dead, but there was a potential
future user in the objc metadata information. I am still looking at
CGObjcMac.cpp, but at this point I am convinced that linker_private
and linker_private_weak are not what they need.
The objc uses are currently split in
* Regular symbols (no '\01' prefix). LLVM already directly provides
whatever semantics they need.
* Uses of a private name (start with "\01L" or "\01l") and private
linkage. We can drop the "\01L" and "\01l" prefixes as soon as llvm
agrees with clang on L being ok or not for a given section. I have two
patches in code review for this.
* Uses of private name and weak linkage.
The last case is the one that one could think would fit one of these
linkages. That is not the case. The semantics are
* the linker will merge these symbol by *name*.
* the linker will hide them in the final DSO.
Given that the merging is done by name, any of the private (or
internal) linkages would be a bad match. They allow llvm to rename the
symbols, and that is really not what we want. From the llvm point of
view, these objects should really be (linkonce|weak)(_odr)?.
For now, just keeping the "\01l" prefix is probably the best for these
symbols. If we one day want to have a more direct support in llvm,
IMHO what we should add is not a linkage, it is just a hidden_symbol
attribute. It would be applicable to multiple linkages. For example,
on weak it would produce the current behavior we have for objc
metadata. On internal, it would be equivalent to private (and we
should then remove private).
llvm-svn: 203866
There are currently two schemes for mapping instruction operands to
instruction-format variables for generating the instruction encoders and
decoders for the assembler and disassembler respectively: a) to map by name and
b) to map by position.
In the long run, we'd like to remove the position-based scheme and use only
name-based mapping. Unfortunately, the name-based scheme currently cannot deal
with complex operands (those with suboperands), and so we currently must use
the position-based scheme for those. On the other hand, the position-based
scheme cannot deal with (register) variables that are split into multiple
ranges. An upcoming commit to the PowerPC backend (adding VSX support) will
require this capability. While we could teach the position-based scheme to
handle that, since we'd like to move away from the position-based mapping
generally, it seems silly to teach it new tricks now. What makes more sense is
to allow for partial transitioning: use the name-based mapping when possible,
and only use the position-based scheme when necessary.
Now the problem is that mixing the two sensibly was not possible: the
position-based mapping would map based on position, but would not skip those
variables that were mapped by name. Instead, the two sets of assignments would
overlap. However, I cannot currently change the current behavior, because there
are some backends that rely on it [I think mistakenly, but I'll send a message
to llvmdev about that]. So I've added a new TableGen bit variable:
noNamedPositionallyEncodedOperands, that can be used to cause the
position-based mapping to skip variables mapped by name.
llvm-svn: 203767
"ProcResource def is not included in the ProcResources".
Some of the machine model definitions were not added to the
processor's list used for diagnostics and error checking.
llvm-svn: 203749
The old system was fairly convoluted:
* A temporary label was created.
* A single PROLOG_LABEL was created with it.
* A few MCCFIInstructions were created with the same label.
The semantics were that the cfi instructions were mapped to the PROLOG_LABEL
via the temporary label. The output position was that of the PROLOG_LABEL.
The temporary label itself was used only for doing the mapping.
The new CFI_INSTRUCTION has a 1:1 mapping to MCCFIInstructions and points to
one by holding an index into the CFI instructions of this function.
I did consider removing MMI.getFrameInstructions completelly and having
CFI_INSTRUCTION own a MCCFIInstruction, but MCCFIInstructions have non
trivial constructors and destructors and are somewhat big, so the this setup
is probably better.
The net result is that we don't create temporary labels that are never used.
llvm-svn: 203204
This compiles with no changes to clang/lld/lldb with MSVC and includes
overloads to various functions which are used by those projects and llvm
which have OwningPtr's as parameters. This should allow out of tree
projects some time to move. There are also no changes to libs/Target,
which should help out of tree targets have time to move, if necessary.
llvm-svn: 203083
Unfortunately, it is currently impossible to use a PatFrag as part of an output
pattern (the part of the pattern that has instructions in it) in TableGen.
Looking at the current implementation, this was clearly intended to work (there
is already code in place to expand patterns in the output DAG), but is
currently broken by the baked-in type-checking assumption and the order in which
the pattern fragments are processed (output pattern fragments need to be
processed after the instruction definitions are processed).
Fixing this is fairly simple, but requires some way of differentiating output
patterns from the existing input patterns. The simplest way to handle this
seems to be to create a subclass of PatFrag, and so that's what I've done here.
As a simple example, this allows us to write:
def crnot : OutPatFrag<(ops node:$in),
(CRNOR $in, $in)>;
def : Pat<(not i1:$in),
(crnot $in)>;
which captures the core use case: handling of repeated subexpressions inside
of complicated output patterns.
This will be used by an upcoming commit to the PowerPC backend.
llvm-svn: 202450
After this I will set the default back to F_None. The advantage is that
before this patch forgetting to set F_Binary would corrupt a file on windows.
Forgetting to set F_Text produces one that cannot be read in notepad, which
is a better failure mode :-)
llvm-svn: 202052
should not be marked nounwind.
Marking them nounwind caused crashes in the WebKit FTL JIT, because if we enable
sufficient optimizations, LLVM starts eliding compact_unwind sections (or any unwind
data for that matter), making deoptimization via stackmaps impossible.
This changes the stackmap intrinsic to be may-throw, adds a test for exactly the
sympton that WebKit saw, and fixes TableGen to handle un-attributed intrinsics.
Thanks to atrick and philipreames for reviewing this.
llvm-svn: 201826
Modifying build_llvm to handle SDKROOT being the name of an SDK rather than a
path. This will still work if SDKROOT is a path.
rdar://problem/15162322
llvm-svn: 201560
Original commits messages:
Add MRMXr/MRMXm form to X86 for use by instructions which treat the 'reg' field of modrm byte as a don't care value. Will allow for simplification of disassembler code.
Simplify a bunch of code by removing the need for the x86 disassembler table builder to know about extended opcodes. The modrm forms are sufficient to convey the information.
llvm-svn: 201065
r201059 appears to cause a crash in a bootstrapped build of clang. Craig
isn't available to look at it right now, so I'm reverting it while he
investigates.
llvm-svn: 201064
Teach the Makefile build system to generate and install CMake modules
LLVMConfig.cmake and LLVMConfigVersion.cmake so that applications that
build with CMake can use 'find_package(LLVM)' even when LLVM is not
built with CMake. These modules tell such applications about available
LLVM libraries and their dependencies.
Run llvm-config to generate the list of libraries and use the results of
llvm-build to generate the library dependencies. Use sed to perform
substitutions in the LLVMConfig.cmake.in and LLVMConfigVersion.cmake.in
sources that our CMake build system uses.
Teach the Makefile build system to generate the LLVMExports.cmake file
with content similar to that produced by the CMake install(EXPORT)
command. Extend llvm-build with an option to generate the library
dependencies fragment for this file.
Contributed by Brad King.
llvm-svn: 201053
- Properly displaying non null terminated StringRef.
- Auto expanding pointer types.
- Displaying real type names for PointerUnions.
- Using "size" and "capacity" across all containers.
- Simplifying code where possible.
llvm-svn: 201004
According to the AAPCS, when a CPRC is allocated to the stack, all other
VFP registers should be marked as unavailable.
I have also modified the rules for allocating non-CPRCs to the stack, to make
it more explicit that all GPRs must be made unavailable. I cannot think of a
case where the old version would produce incorrect answers, so there is no test
for this.
llvm-svn: 200970
Modern compilers (Clang 3.4, GCC 4.8) warn on variadic macros being
introduced in C99, which produces a huge number of useless diagnostics
since this macro is unused in the whole project.
llvm-svn: 200479
The addition of IC_OPSIZE_ADSIZE in r198759 wasn't quite complete. It
also turns out to have been unnecessary. The disassembler handles the
AdSize prefix for itself, and doesn't care about the difference between
(e.g.) MOV8ao8 and MOB8ao8_16 definitions. So just let them coexist and
don't worry about it.
llvm-svn: 199654
promotion code, Tablegen will now select FPExt for floating point promotions
(previously it had returned AExt, which is not valid for floating point types).
Any out-of-tree targets that were relying on AExt being returned for FP
promotions will need to update their code check for FPExt instead.
llvm-svn: 199252
This commit prospectively brings the benefits of r198766 to older supported
Python versions (2.5+).
Tested with Python 2.6, 2.7, 3.1 and 3.3 (!)
llvm-svn: 199009
On the other hand, exec(compile()) doesn't work in older Python versions in the
2.x series.
This commit introduces exec(compile()) with a fallback to plain exec(). That'll
hopefully hit the sweet spot in terms of version support.
Followup to r198766 which added enhanced source locations for lit cfg parsing.
llvm-svn: 199006
To declare or define reserved identifers is undefined behaviour in standard
C++. This needs to be addressed in compiler-rt before it can be used in LLVM.
See the list discussion for details.
This reverts commit r198858.
llvm-svn: 198884
Python doesn't do a good job at diagnosing string exec() so use execfile()
where available.
This should be a timesaver when trying to get to the bottom of build bot
failures.
Before:
File "llvm/utils/lit/lit/TestingConfig.py", line 93, in load_from_path
exec("exec data in cfg_globals")
File "<string>", line 1, in <module>
File "<string>", line 194, in <module>
NameError: name 'typo' is not defined
After:
File "llvm/utils/lit/lit/TestingConfig.py", line 95, in load_from_path
execfile(path, cfg_globals)
File "clang/test/lit.cfg", line 194, in <module>
typo
^~~~
NameError: name 'typo' is not defined
llvm-svn: 198766
It seems there is no separate instruction class for having AdSize *and*
OpSize bits set, which is required in order to disambiguate between all
these instructions. So add that to the disassembler.
Hm, perhaps we do need an AdSize16 bit after all?
llvm-svn: 198759
A ValueType in a pattern dag is a type cast, and GetNumNodeResults should
handle it (the type cast has only one result).
This comes up, for example, during the type checking of pattern fragments, for
example, AArch64's Neon_combine_2d fragment is:
dag Operands = (ops node:$Rm, node:$Rn);
dag Fragment = (v2f64 (concat_vectors (v1f64 node:$Rm), (v1f64 node:$Rn)));
llvm-svn: 198347
Add option -i to prioritize test runs by source file modification time and
previous failure state.
This optimal scheduling reduces typical test-and-fix iteration times to a
matter of seconds by rapidly answering the questions:
1) Did my recent change fix tests that were previously failing?
2) Do the tests I just wrote / modified still work?
The current implementation requires write permissions to the source tree
because it uses mtimes to track failures.
llvm-svn: 198150
Since r197684, "install/bin/llvm-config --obj-root" hasn't shown the build tree. The builder was finding utils in the build tree, from the installed tree.
I will revert this after dragonegg builder would be tweaked not to use installed llvm-config.
llvm-svn: 197786
That's what it actually means, and with 16-bit support it's going to be
a little more relevant since in a few corner cases we may actually want
to distinguish between 16-bit and 32-bit mode (for example the bare 'push'
aliases to pushw/pushl etc.)
Patch by David Woodhouse
llvm-svn: 197768
Unfortunately, the PowerPC instruction definitions make heavy use of the
positional operand encoding heuristic to map operands onto bitfield variables
in the instruction definitions. Changing this to use name-based mapping is not
trivial, however, because additional infrastructure needs to be designed to
handle mapping of complex operands (with multiple suboperands) onto multiple
bitfield variables.
In the mean time, this adds support for positionally encoded operands to
FixedLenDecoderEmitter, so that we can generate a disassembler for the PowerPC
backend. To prevent an accidental reliance on this feature, and to prevent an
undesirable interaction with existing disassemblers, a backend must opt-in to
this support by setting the new decodePositionallyEncodedOperands
instruction-set bit to true.
When enabled, this iterates the variables that contribute to the instruction
encoding, just as the encoder does, and emulates the procedure the encoder uses
to map "numbered" operands to variables. The bit range for each variable is
also determined as the encoder determines them. This map is then consulted
during the decoder-generator's loop over operands to decode, allowing the
decoder to understand both position-based and name-based operand-to-variable
mappings.
As noted in the comment on the decodePositionallyEncodedOperands definition,
this support should be removed once it is no longer needed. There should be no
change to existing disassemblers.
llvm-svn: 197691
This is more prep for adding the PowerPC disassembler. FixedLenDecoderEmitter
should recognize PointerLikeRegClass operands as register types, and generate
register-like decoding calls instead of treating them like immediates.
llvm-svn: 197680
The convention used to specify the PowerPC ISA is that bits are numbered in
reverse order (0 is the index of the high bit). To support this "little endian"
encoding convention, CodeEmitterGen will reverse the bit numberings prior to
generating the encoding tables. In order to generate a disassembler,
FixedLenDecoderEmitter needs to do the same.
This moves the bit reversal logic out of CodeEmitterGen and into CodeGenTarget
(where it can be used by both CodeEmitterGen and FixedLenDecoderEmitter). This
is prep work for disassembly support in the PPC backend (which is the only
in-tree user of this little-endian encoding support).
llvm-svn: 197532
This missing parameter was causing bin/llvm-lit to run the unittests
from my primary build directory instead of my self-hosting build
directory because llvm-config was on my PATH.
This more closely matches what 'make check' will pass to lit.py.
llvm-svn: 197444
Added scalar compare VCMPSS, VCMPSD.
Implemented LowerSELECT for scalar FP operations.
I replaced FSETCCss, FSETCCsd with one node type FSETCCs.
Node extract_vector_elt(v16i1/v8i1, idx) returns an element of type i1.
llvm-svn: 197384
Summary:
Directives are being ignored, when they occur between a partial-word false
match and any match on another prefix.
For example, with FOO and BAR prefixes:
_FOO
FOO: foo
BAR: bar
FileCheck incorrectly matches:
fog
bar
This happens because FOO falsely matched as a partial word at '_FOO' and was
ignored while BAR matched at 'BAR:'. The match of BAR is incorrectly returned
as the 'first match' causing the FOO directive to be discarded.
Fixed this the same way as r194565 (D2166) did for a similar test case.
The partial-word false match should be counted as a match for the purposes of
finding the first match of a prefix, but should be returned as a false match
using CheckTy::CheckNone so that it isn't treated as a directive.
Fixes PR17995
Reviewers: samsonov, arsenm
Reviewed By: samsonov
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2228
llvm-svn: 195248
The -triple option is used to create a named tarball of the release binaries.
Also disable the RPATH modifications on Mac OS X. It's not needed.
llvm-svn: 195193
This patch places class definitions in implementation files into anonymous
namespaces to prevent weak vtables. This eliminates the need of providing an
out-of-line definition to pin the vtable explicitly to the file.
llvm-svn: 195092
This patch removes most of the trivial cases of weak vtables by pinning them to
a single object file. The memory leaks in this version have been fixed. Thanks
Alexey for pointing them out.
Differential Revision: http://llvm-reviews.chandlerc.com/D2068
Reviewed by Andy
llvm-svn: 195064
libtool sets RPATH to "$ORIGIN/../lib:/the/directory/where/it/was/built/lib" so that a developper can use the built or the installed version seamlessly. Our binary packages should not have this developer friendly tweak, as the users of the binaries will not have the build tree.
Beside, in case the development tree is a possibly on an automounted share, this can create very bad user experience : they will incur an automount timeout penalty and will get a very bad feeling of llvm/clang's speed.
llvm-svn: 194999
This change is incorrect. If you delete virtual destructor of both a base class
and a subclass, then the following code:
Base *foo = new Child();
delete foo;
will not cause the destructor for members of Child class. As a result, I observe
plently of memory leaks. Notable examples I investigated are:
ObjectBuffer and ObjectBufferStream, AttributeImpl and StringSAttributeImpl.
llvm-svn: 194997
This patch removes most of the trivial cases of weak vtables by pinning them to
a single object file.
Differential Revision: http://llvm-reviews.chandlerc.com/D2068
Reviewed by Andy
llvm-svn: 194865
externally to simplify our integration of GoogleTest into LLVM. Also,
build the single source file gtest-all.cc instead of the individual
source files as we don't expect these to change and thus gain nothing
from increased incrementality in compiles.
This makes our standard build of googletest exactly like upstream's
recommended build and the sanitizer's build. It also simplifies the
steps of importing a new version should we ever want one.
llvm-svn: 194801
Summary:
Fix a case when "FileCheck --check-prefix=CHECK --check-prefix=CHECKER"
would silently ignore check-lines of the form:
CHECKER: foo
Reviewers: dsanders
Reviewed By: dsanders
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2168
llvm-svn: 194577
Summary:
This fixes a subtle bug in new FileCheck feature added
in r194343. When we search for the first satisfying check-prefix,
we should actually return the first encounter of some check-prefix as a
substring, even if it's not a part of valid check-line. Otherwise
"FileCheck --check-prefix=FOO --check-prefix=BAR" with check file:
FOO not a vaild check-line
FOO: foo
BAR: bar
incorrectly accepted file:
fog
bar
as it skipped the first two encounters of FOO, matching only BAR: line.
Reviewers: arsenm, dsanders
Reviewed By: dsanders
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2166
llvm-svn: 194565
linkonce_odr_auto_hide was in incomplete attempt to implement a way
for the linker to hide symbols that are known to be available in every
TU and whose addresses are not relevant for a particular DSO.
It was redundant in that it all its uses are equivalent to
linkonce_odr+unnamed_addr. Unlike those, it has never been connected
to clang or llvm's optimizers, so it was effectively dead.
Given that nothing produces it, this patch just nukes it
(other than the llvm-c enum value).
llvm-svn: 193865
These used to be referenced by the CGI->AWI map (in AsmWriterEmitter), but
stored in a vector local to EmitPrintInstruction. Move the vector to
AsmWriterEmitter too.
llvm-svn: 193525
The error raised by Python varies by platform(!), so let's just catch any
exception and fall back.
Thanks to Sylvestre Ledru for noticing this on a Debian / Python 2.7 system
running code coverage.
llvm-svn: 193516
so try PATH next. Assume it is sane enough to cover the usual system
bash locations too, but the old list is not good enough for NetBSD.
llvm-svn: 193471
If multiprocessing was requested, detected as available and subsequently failed
to initialize it's worth letting the user know about it before falling back to
threads.
This condition can arise in certain OpenBSD / FreeBSD Python versions.
llvm-svn: 193465
This should be a better fix for lit multiprocessing failures, replacing the
OpenBSD and FreeBSD workarounds in r193413 and r193457.
Reference: http://bugs.python.org/issue3770
llvm-svn: 193463
Speculative quick fix based on clang-X86_64-freebsd output:
File "/usr/local/lib/python2.6/multiprocessing/synchronize.py", line 33, in <module>
" function, see issue 3770.")
ImportError: This platform lacks a functioning sem_open implementation, therefore, the required synchronization primitives needed will not function, see issue 3770.
llvm-svn: 193457
Summary:
The MSVCRT deliberately sends main() code-page specific characters.
This isn't too useful to LLVM as we end up converting the arguments to
UTF-16 and subsequently attempt to use the result as, for example, a
file name. Instead, we need to have the ability to access the Unicode
command line and transform it to UTF-8.
This has the distinct advantage over using the MSVC-specific wmain()
function as our entry point because:
- It doesn't work on cygwin.
- It only work on MinGW with caveats and only then on certain versions.
- We get to keep our entry point as main(). :)
N.B. This patch includes fixes to other parts of lib/Support/Windows
s.t. we would be able to take advantage of getting the Unicode paths.
E.G. clang spawning clang -cc1 would want to give it Unicode arguments.
Reviewers: aaron.ballman, Bigcheese, rnk, ruiu
Reviewed By: rnk
CC: llvm-commits, ygao
Differential Revision: http://llvm-reviews.chandlerc.com/D1834
llvm-svn: 192069
The old code skipped one of the sorting criteria if either pattern had
no types. This could lead to cycles of the form X < Y, Y < Z, Z < X.
llvm-svn: 191735
Add VEX_LIG to scalar FMA4 instructions.
Use VEX_LIG in some of the inheriting checks in disassembler table generator.
Make use of VEX_L_W, VEX_L_W_XS, VEX_L_W_XD contexts.
Don't let VEX_L_W, VEX_L_W_XS, VEX_L_W_XD, VEX_L_W_OPSIZE inherit from their non-L forms unless VEX_LIG is set.
Let VEX_L_W, VEX_L_W_XS, VEX_L_W_XD, VEX_L_W_OPSIZE inherit from all of their non-L or non-W cases.
Increase ranking on VEX_L_W, VEX_L_W_XS, VEX_L_W_XD, VEX_L_W_OPSIZE so they get chosen over non-L/non-W forms.
llvm-svn: 191649
Ideally, the machinel model is added at the time the instructions are
defined. But many instructions in X86InstrSSE.td still need a model.
Without this workaround the scheduler asserts because x86 already has
itinerary classes for these instructions, indicating they should be
modeled by the scheduler. Since we use the new machine model for other
instructions, it expects a new machine model for these too.
llvm-svn: 191391
It is temporary patch. We need to keep it in trunk, since it makes easer to test it on buildbots on different platforms.
Once we see stable MergeFunctions behaviour with satisfied perfomance, this patch will be removed.
llvm-svn: 191331
Patch by Ana Pazos.
1.Added support for v1ix and v1fx types.
2.Added Scalar Pairwise Reduce instructions.
3.Added initial implementation of Scalar Arithmetic instructions.
llvm-svn: 191263
This makes using array_pod_sort significantly safer. The implementation relies
on function pointer casting but that should be safe as we're dealing with void*
here.
llvm-svn: 191175
TableGen was sorting the entries in some of its internal data
structures by pointer. This order filtered through to the final
matching table and affected the diagnostics produced on bad assembly
occasionally.
It also turns out STL algorithms are ridiculously easy to misuse on
containers with custom order methods. (No bugs before, or now that I
know of, but plenty in the middle).
This should fix the sanitizer bot, which ends up with weird pointers.
llvm-svn: 190793
Summary:
When a git repository had multiple remotes, ${repository} will be set to a multiline string. This causes compilation errors in SVNVersion.inc.
Fix this by limiting the output of utils/GetRepositoryPath to the first remote (which is reasonably likely to be 'origin').
Reviewers: jordan_rose
CC: llvm-commits, t.p.northover
Differential Revision: http://llvm-reviews.chandlerc.com/D1659
llvm-svn: 190778
svn 1.8.0 emits an additional line matching 'URL:' in its 'svn info' command
('Relative URL:').
Changed the grep to match only the intended line so that a valid SVNVersion.inc
is generated.
The problem doesnt occur with the svn version I'm using (1.7.5) but Tobias has
confirmed that the change fixes the problem.
See http://llvm.org/bugs/show_bug.cgi?id=17203
llvm-svn: 190685
The 'Deprecated' class allows you to specify a SubtargetFeature that the
instruction is deprecated on.
The 'ComplexDeprecationPredicate' class allows you to define a custom
predicate that is called to check for deprecation.
For example:
ComplexDeprecationPredicate<"MCR">
would mean you would have to define the following function:
bool getMCRDeprecationInfo(MCInst &MI, MCSubtargetInfo &STI,
std::string &Info)
Which returns 'false' for not deprecated, and 'true' for deprecated
and store the warning message in 'Info'.
The MCTargetAsmParser constructor was chaned to take an extra argument of
the MCInstrInfo class, so out-of-tree targets will need to be changed.
llvm-svn: 190598
- This is a work-in-progress and all details are subject to change, but I am
trying to build up support for allowing lit to be used as a driver for
performance tests (or other tests which might want to record information
beyond simple PASS/FAIL).
llvm-svn: 190535
- This aligns with how existing test suites end up wanting to use the local
config files, conceptually it makes sense to consider them to be inherited.
llvm-svn: 189885
- At least on OS X, it is important for correct behavior of /bin/[ that argv[0]
is passed as written, and not as the full executable path.
llvm-svn: 189559
Link.exe's command line options are case-insensitive. This patch
adds a new attribute to OptTable to let the option parser to compare
options, ignoring case.
Command lines are generally case-insensitive on Windows. CL.exe is an
exception. So this new attribute should be useful for other commands
running on Windows.
Differential Revision: http://llvm-reviews.chandlerc.com/D1485
llvm-svn: 189416
This function attribute indicates that the function is not optimized
by any optimization or code generator passes with the
exception of interprocedural optimization passes.
llvm-svn: 189101
This field specifies registers that are preserved across function calls,
but that should not be included in the generates SaveList array.
This can be used ot generate regmasks for architectures that save
registers through other means, like SPARC's register windows.
llvm-svn: 189084
Back in the mists of time (2008), it seems TableGen couldn't handle the
patterns necessary to match ARM's CMOV node that we convert select operations
to, so we wrote a lot of fairly hairy C++ to do it for us.
TableGen can deal with it now: there were a few minor differences to CodeGen
(see tests), but nothing obviously worse that I could see, so we should
probably address anything that *does* come up in a localised manner.
llvm-svn: 188995
- For whatever reason, we have a lot of test files with bogus unicode
characters. This patch allows those scripts to still be parsed on Python3 by
changing the parsing logic to work on binary files, and only require the
actual script commands to be convertible to ascii.
- This patch has been tweaked to now ensure that the command strings are not of
unicode type on Python 2.6-7.
llvm-svn: 188398
- For whatever reason, we have a lot of test files with bogus unicode
characters. This patch allows those scripts to still be parsed on Python3 by
changing the parsing logic to work on binary files, and only require the
actual script commands to be convertible to ascii.
llvm-svn: 188376
FileCheck should check to make sure the prefix was found, and not a word
containing it (e.g -check-prefix=BASEREL shouldn't match NOBASEREL).
Patch by Ron Ofir.
llvm-svn: 188221
clang bootstraps intermittently failed for me due a difference in
the MCK_Reg ordering in ARMGenAsmMatcher.inc. E.g. in my latest
run the stage 1 and stage 3 versions were the same but the stage 2
one was different (though still functionally correct). This meant
that the .o comparison failed.
MCK_Regs were assigned by iterating over a std::set< std::set<Record*> >,
and since std::set is sorted lexicographically, the order depended on the
order of the pointer values. This patch replaces the pointer ordering
with LessRecordByID.
llvm-svn: 188164
Craig Topper