This allows us to use its value everywhere, rather than just clang. Some
other places, like opt and lld, will use its value soon.
Rename it internally to LLVM_ENABLE_NEW_PASS_MANAGER.
The #define for it is now in llvm-config.h.
The initial land accidentally set the value of
LLVM_ENABLE_NEW_PASS_MANAGER to the string
ENABLE_EXPERIMENTAL_NEW_PASS_MANAGER instead of its value.
Reviewed By: rnk, hans
Differential Revision: https://reviews.llvm.org/D92072
This allows us to use its value everywhere, rather than just clang. Some
other places, like opt and lld, will use its value soon.
The #define for it is now in llvm-config.h.
Reviewed By: rnk, hans
Differential Revision: https://reviews.llvm.org/D92072
This makes the options API composable, allows boolean flags to imply non-boolean values and makes the code more logical (IMO).
Differential Revision: https://reviews.llvm.org/D91861
By explicitly requesting the system linker with `-fuse-ld=`, the
tests are able to CHECK for the system linker even with
CLANG_DEFAULT_LINKER=lld.
Alternative to D74704.
Differential Revision: https://reviews.llvm.org/D92291
This patch:
- adds an ld64.lld.darwinnew symlink for lld, to go with f2710d4b57,
so that `clang -fuse-ld=lld.darwinnew` can be used to test new
Mach-O lld while it's in bring-up. (The expectation is that we'll
remove this again once new Mach-O lld is the defauld and only Mach-O
lld.)
- lets the clang driver know if the linker is lld (currently
only triggered if `-fuse-ld=lld` or `-fuse-ld=lld.darwinnew` is
passed). Currently only used for the next point, but could be used
to implement other features that need close coordination between
compiler and linker, e.g. having a diag for calling `clang++` instead
of `clang` when link errors are caused by a missing C++ stdlib.
- lets the clang driver pass `-demangle` to Mach-O lld (both old and
new), in addition to ld64
- implements -demangle for new Mach-O lld
- changes demangleItanium() to accept _Z, __Z, ___Z, ____Z prefixes
(and updates one test added in D68014). Mach-O has an extra
underscore for symbols, and the three (or, on Mach-O, four)
underscores are used for block names.
Differential Revision: https://reviews.llvm.org/D91884
Patch limits set of predicates seen by mutuallyExclusive to ones which belong
to current processor model. This needs to be done, because same predicate can
be used by multiple processor models which can make mutuallyExclusive over
optimistic.
Patch fixes scheduling of ALU instructions which modify pc register. Patch
also fixes computation of mutually exclusive predicates for sequences of
variants to be properly expanded
Differential revision: https://reviews.llvm.org/D91266
Tablegen seg faulted when parsing a Pat where the destination part has
no output (zero instruction), due to a register class lookup using
nullptr.
Reviewed By: Paul-C-Anagnostopoulos
Differential Revision: https://reviews.llvm.org/D90829
llvm-config output with the gn build is just good enough to make
tests pass, but llvm-config wants all .a files it knows about to
actually exist. So let it know about fewer .a files that don't
exist if not all targets are enabled.
The test needs an object file, which it currenty gets with
`-target x86_64-apple-darwin10`. Rather than adding `REQUIRES: X86`, create
the object file via yaml2obj. This way, the test runs and passes even if the
host arch isn't x86 and only the host arch is built.
Part of PR46644.
It'd be nicer if there was a group target that forwarded either to
//clang-tools-extra/clangd/index/remote or
//clangd/index/remote/unimplemented based on if remote index is enabled,
but for now it's never enabled in the gn build.
Currently the tarballs contain superfluous metadata, like the user name
of the packager and via Pax headers even the PID of the tar process that
packaged the files. We build the monorepo projects directly from the git
repo using "git archive" and for the test-suite we add some flags as
recommended by https://reproducible-builds.org/docs/archives/. We don't
use numeric owners though to be compatible with "git archive".
The advantage of "git archive" is that the releaser doesn't have to
download the tar ball and extract it, rather the archive is built
directly from the repository. This is probably what GitHub uses
internally to produce the tarballs, so I wouldn't expect a difference.
Reviewed By: tstellar
Differential Revision: https://reviews.llvm.org/D91494
2c196bbc6b asserted that
`SmallVector::push_back` doesn't invalidate the parameter when it needs
to grow. Do the same for `resize`, `append`, `assign`, `insert`, and
`emplace_back`.
Differential Revision: https://reviews.llvm.org/D91744
- The new option, -arcmt-action, is a simple enum based option.
- The driver is modified to translate the existing -ccc-acmt-* options accordingly
Depends on D83298
Reviewed By: Bigcheese
Original patch by Daniel Grumberg.
Differential Revision: https://reviews.llvm.org/D83315
This patch factors out the part of printInstruction that gets the
mnemonic string for a given MCInst. This is intended to be used
subsequently for the instruction-mix remarks to display the final
mnemonic (D90040).
Unfortunately making `getMnemonic` available to the AsmPrinter
seems to require making it virtual. Not sure if there's a way around
that with the current layering of the AsmPrinters.
Reviewed By: Paul-C-Anagnostopoulos
Differential Revision: https://reviews.llvm.org/D90039
This enables automatically parsing and generating CC1 arguments for options where two flags control the same field, e.g. -fexperimental-new-pass-manager and -fno-experimental new pass manager.
Reviewed By: Bigcheese, dexonsmith
Original patch by Daniel Grumberg.
Differential Revision: https://reviews.llvm.org/D83071
I had manually removed unused prefixes from CodeGen/X86 directory for more than 100 tests.
I checked the change history for each of them at the beginning, and then I mainly focused on the format since I found all of the unused prefixes were result from either insensible copy or residuum after functional update.
I think it's OK to remove the remaining X86 tests by script now. I wrote a rough script which works for me in most tests. I put it in llvm/utils temporarily for review and hope it may help other components owners.
The tests in this patch are all generated by the tool and checked by update tool for the autogenerated tests. I skimmed them and checked about 30 tests and didn't find any unexpected changes.
Reviewed By: mtrofin, MaskRay
Differential Revision: https://reviews.llvm.org/D91496
Describe in the BackEnd Developer's Guide. Instrument a few backends.
Remove an old unused timing facility. Add a null backend for timing
the parser.
Differential Revision: https://reviews.llvm.org/D91388
See discussion in https://bugs.llvm.org/show_bug.cgi?id=45073 / https://reviews.llvm.org/D66324#2334485
the implementation is known-broken for certain inputs,
the bugreport was up for a significant amount of timer,
and there has been no activity to address it.
Therefore, just completely rip out all of misexpect handling.
I suspect, fixing it requires redesigning the internals of MD_misexpect.
Should anyone commit to fixing the implementation problem,
starting from clean slate may be better anyways.
This reverts commit 7bdad08429,
and some of it's follow-ups, that don't stand on their own.
Merge existing marhsalling info kinds and add some primitives to
express flag options that contribute to a bitfield.
Depends on D82574
Original patch by Daniel Grumberg.
Reviewed By: Bigcheese
Differential Revision: https://reviews.llvm.org/D82860
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
This reverts commit 09248a5d25.
Some builds are broken. I suspect a `static constexpr` in a class missing a
definition out of class (required pre-c++17).
Merge existing marhsalling info kinds and add some primitives to
express flag options that contribute to a bitfield.
Depends on D82574
Reviewed By: Bigcheese
Differential Revision: https://reviews.llvm.org/D82860
__register_frame and __deregister_frame are associated with the
.eh_frame section, which I think is used on all of our platforms
except Windows and 32-bit ARM (which uses the ARM EHABI).
Also add a file that was added to lld/MachO.
This ports a number of OpenCL and fast-math flags for floating point
over to the new marshalling infrastructure.
As part of this, `Opt{In,Out}FFlag` were enhanced to allow other flags to
imply them, via `DefaultAnyOf<>`. For example:
```
defm signed_zeros : OptOutFFlag<"signed-zeros", ...,
"LangOpts->NoSignedZero",
DefaultAnyOf<[cl_no_signed_zeros, menable_unsafe_fp_math]>>;
```
defines `-fsigned-zeros` (`false`) and `-fno-signed-zeros` (`true`)
linked to the keypath `LangOpts->NoSignedZero`, defaulting to `false`,
but set to `true` implicitly if one of `-cl-no-signed-zeros` or
`-menable-unsafe-fp-math` is on.
Note that the initial patch was written Daniel Grumberg.
Differential Revision: https://reviews.llvm.org/D82756
Some of these were found by running clang-format over the generated
code, although that complains about far more issues than I have fixed
here.
Differential Revision: https://reviews.llvm.org/D90937
This patch add some parsing and clause validity tests for the set directive.
It makes use of the possibility introduces in patch D90770 to check the restriction
were one of the default_async, device_num and device_type clauses is required but also
not more than once on the set directive.
Reviewed By: sameeranjoshi
Differential Revision: https://reviews.llvm.org/D90771
Validity check introduce in D90241 are a bit too restrict and this patch propose to losen
them a bit. The duplicate clauses is now check only between the three allowed lists and between the
requiredClauses and allowedClauses lists. This allows to enable some check where a clause can be
required but also appear only once on the directive. We found these kind of restriction useful
on the set directive in OpenACC for example.
Reviewed By: kiranchandramohan
Differential Revision: https://reviews.llvm.org/D90770
`mftb` and `mftbl` are equivalent, there is no need to have two names for doing the same thing, rename `mftbl` to only have `mftb`.
Differential Revision: https://reviews.llvm.org/D89506
This patch adds some helper in the DirectiveLanguage wrapper to initialize it from
the RecordKeeper and validate the records. This simplify arguments in lots of function
since only the DirectiveLanguge is passed.
Reviewed By: kiranchandramohan
Differential Revision: https://reviews.llvm.org/D90358
- pass required=False to use_clang(), as we don't need it
- fix required=False (which was unused and rotted):
- make derived substitutions conditional on it
- add a feature so we can disable tests that need it
- conditionally disable our one test that depends on %resource_dir.
This doesn't seem right from first principles, but isn't a big deal.
Differential Revision: https://reviews.llvm.org/D90528
Patch fixes case when sched class has write and read variants belonging
to different processor models.
Differential revision: https://reviews.llvm.org/D89777
If more than a prefix is provided - e.g. --check-prefixes=CHECK,FOO - we
don't report if (say) FOO is never used. This may lead to a gap in our
test coverage.
This patch introduces a new option, --allow-unused-prefixes. It
currently is set to true, keeping today's behavior. After we explicitly
set it in tests where this behavior was actually intentional, we will
switch it to false by default.
Differential Revision: https://reviews.llvm.org/D90281
This preprocessor define was meant to be used to conditionally include VCSVersion.inc. However, the define was always set, and it was the content of the header that was conditionally generated. Therefore HAVE_VCS_VERSION_INC should be cleaned up.
Reviewed By: gribozavr2, MaskRay
Differential Revision: https://reviews.llvm.org/D84623
D9844 fixed a problem where the ss suffix in the AsmString "cmp${cc}ss"
was recognised as the X86 SS register, by only recognising a token as a
register name if it is "isolated", i.e. surrounded by separator
characters.
In the AMDGPU backend there are many operands like $clamp which expand
to an optional string " clamp" including the preceding space, so we want
to have AsmStrings including sequences like "vcc$clamp" where vcc is a
register name.
This patch relaxes the rules for an isolated token, to say that it's OK
if the token is immediately followed by a '$'.
Differential Revision: https://reviews.llvm.org/D90315
Check for duplicate clauses associated with directive. Clauses can appear only once
in the 4 lists associated with each directive (allowedClauses, allowedOnceClauses,
allowedExclusiveClauses, requiredClauses). Duplicates were already present (removed with this
patch) or were introduce in new patches by mistake (D89861).
Reviewed By: kiranchandramohan
Differential Revision: https://reviews.llvm.org/D90241
As proposed in https://github.com/WebAssembly/simd/pull/376. This commit
implements new builtin functions and intrinsics for these instructions, but does
not yet add them to wasm_simd128.h because they have not yet been merged to the
proposal. These are the first instructions with opcodes greater than 0xff, so
this commit updates the MC layer and disassembler to handle that correctly.
Differential Revision: https://reviews.llvm.org/D90253
TestWorkspace allows easily writing tests involving multiple
files that can have inclusion relationships between them.
BackgroundIndexTest.RelationsMultiFile is refactored to use
TestWorkspace, and moved to FileIndexTest as it no longer
depends on BackgroundIndex.
Differential Revision: https://reviews.llvm.org/D89297
It's currently ambiguous in IR whether the source language explicitly
did not want a stack a stack protector (in C, via function attribute
no_stack_protector) or doesn't care for any given function.
It's common for code that manipulates the stack via inline assembly or
that has to set up its own stack canary (such as the Linux kernel) would
like to avoid stack protectors in certain functions. In this case, we've
been bitten by numerous bugs where a callee with a stack protector is
inlined into an __attribute__((__no_stack_protector__)) caller, which
generally breaks the caller's assumptions about not having a stack
protector. LTO exacerbates the issue.
While developers can avoid this by putting all no_stack_protector
functions in one translation unit together and compiling those with
-fno-stack-protector, it's generally not very ergonomic or as
ergonomic as a function attribute, and still doesn't work for LTO. See also:
https://lore.kernel.org/linux-pm/20200915172658.1432732-1-rkir@google.com/https://lore.kernel.org/lkml/20200918201436.2932360-30-samitolvanen@google.com/T/#u
Typically, when inlining a callee into a caller, the caller will be
upgraded in its level of stack protection (see adjustCallerSSPLevel()).
By adding an explicit attribute in the IR when the function attribute is
used in the source language, we can now identify such cases and prevent
inlining. Block inlining when the callee and caller differ in the case that one
contains `nossp` when the other has `ssp`, `sspstrong`, or `sspreq`.
Fixes pr/47479.
Reviewed By: void
Differential Revision: https://reviews.llvm.org/D87956
There are two optimizations here:
1. Consider the following code:
FCMPSrr %0, %1, implicit-def $nzcv
%sel1:gpr32 = CSELWr %_, %_, 12, implicit $nzcv
%sub:gpr32 = SUBSWrr %_, %_, implicit-def $nzcv
FCMPSrr %0, %1, implicit-def $nzcv
%sel2:gpr32 = CSELWr %_, %_, 12, implicit $nzcv
This kind of code where we have 2 FCMPs each feeding a CSEL can happen
when we have a single IR fcmp being used by two selects. During selection,
to ensure that there can be no clobbering of nzcv between the fcmp and the
csel, we have to generate an fcmp immediately before each csel is
selected.
However, often we can essentially CSE these together later in MachineCSE.
This doesn't work though if there are unrelated flag-setting instructions
in between the two FCMPs. In this case, the SUBS defines NZCV
but it doesn't have any users, being overwritten by the second FCMP.
Our solution here is to try to convert flag setting operations between
a interval of identical FCMPs, so that CSE will be able to eliminate one.
2. SelectionDAG imported patterns for arithmetic ops currently select the
flag-setting ops for CSE reasons, and add the implicit-def $nzcv operand
to those instructions. However if those impdef operands are not marked as
dead, the peephole optimizations are not able to optimize them into non-flag
setting variants. The optimization here is to find these dead imp-defs and
mark them as such.
This pass is only enabled when optimizations are enabled.
Differential Revision: https://reviews.llvm.org/D89415
Runs an executable on a remote host.
This is meant to be used as an executor when running the LLVM and the Libraries tests on a target.
Reviewed By: vvereschaka
Differential Revision: https://reviews.llvm.org/D89349
Implementation of instructions table.get, table.set, table.grow,
table.size, table.fill, table.copy.
Missing instructions are table.init and elem.drop as they deal with
element sections which are not yet implemented.
Added more tests to tables.s
Differential Revision: https://reviews.llvm.org/D89797
Fixes
$ ninja obj/build/rel/gen/clang-tools-extra/clangd/CompletionModel.CompletionModel.obj
Some tablegen include files from clang/include/clang/AST and
clang/include/clang/Sema need to be generated before CompletionModel is
compiled.
Reviewed By: thakis
Differential Revision: https://reviews.llvm.org/D89657
37c030f81a made it so that depending on //libcxx/include
automatically added the copied header dir to the include search path.
For some reason, clang can't build against the copied libcxx headers
(it complains about ldiv_t not being a type). I don't have a mac
to debug right now, but for the clang target this change was
unintentional anyways -- only depend on the copies target, instead
of on the target that also adjusts the include path.
Currently, a LIT test named directly (on the command line) will
be run even if the name of the test file does not meet the rules
to be considered a test in the LIT test configuration files for
its test suite. For example, if the test does not have a
recognised file extension.
This makes it relatively easy to write a LIT test that won't
actually be run. I did in: https://reviews.llvm.org/D82567
This patch adds an error to avoid users doing that. There is a
small performance overhead for this check. A command line option
has been added so that users can opt into the old behaviour.
Differential Revision: https://reviews.llvm.org/D83069
LLVM IR currently assumes some form of forward progress. This form is
not explicitly defined anywhere, and is the cause of miscompilations
in most languages that are not C++11 or later. This implicit forward progress
guarantee can not be opted out of on a function level nor on a loop
level. Languages such as C (C11 and later), C++ (pre-C++11), and Rust
have different forward progress requirements and this needs to be
evident in the IR.
Specifically, C11 and onwards (6.8.5, Paragraph 6) states that "An
iteration statement whose controlling expression is not a constant
expression, that performs no input/output operations, does not access
volatile objects, and performs no synchronization or atomic operations
in its body, controlling expression, or (in the case of for statement)
its expression-3, may be assumed by the implementation to terminate."
C++11 and onwards does not have this assumption, and instead assumes
that every thread must make progress as defined in [intro.progress] when
it comes to scheduling.
This was initially brought up in [0] as a bug, a solution was presented
in [1] which is the current workaround, and the predecessor to this
change was [2].
After defining a notion of forward progress for IR, there are two
options to address this:
1) Set the default to assuming Forward Progress and provide an opt-out for functions and an opt-in for loops.
2) Set the default to not assuming Forward Progress and provide an opt-in for functions, and an opt-in for loops.
Option 2) has been selected because only C++11 and onwards have a
forward progress requirement and it makes sense for them to opt-into it
via the defined `mustprogress` function attribute. The `mustprogress`
function attribute indicates that the function is required to make
forward progress as defined. This is sharply in contrast to the status
quo where this is implicitly assumed. In addition, `willreturn` implies `mustprogress`.
The background for why this definition was chosen is in [3] and for why
the option was chosen is in [4] and the corresponding thread(s). The implementation is in D85393, the
clang patch is in D86841, the LoopDeletion patch is in D86844, the
Inliner patches are in D87180 and D87262, and there will be more
incoming.
[0] https://bugs.llvm.org/show_bug.cgi?id=965#c25
[1] https://lists.llvm.org/pipermail/llvm-dev/2017-October/118558.html
[2] https://reviews.llvm.org/D65718
[3] https://lists.llvm.org/pipermail/llvm-dev/2020-September/144919.html
[4] https://lists.llvm.org/pipermail/llvm-dev/2020-September/145023.html
Reviewed By: jdoerfert, efriedma, nikic
Differential Revision: https://reviews.llvm.org/D86233
I did some profiling of lit while trying to optimize the libc++ test
startup for remote hosts and it turns out that there is a realpath() call
for every message printed and this shows up in the profile.
The inspect.getframeinfo() function calls realpath() internally and
moreover we don't need most of the other information returned from it.
This patch uses inspect.getsourcefile() and os.path.abspath() to remove
../ from the path instead. Not resolving symlinks reduces the startup time
for running a single test with lit by about 50ms for me.
Reviewed By: ldionne, yln
Differential Revision: https://reviews.llvm.org/D89186
In CodeGenDAGPatterns.cpp we were relying upon TypeSize comparison
operators for ordering types, when we can actually just use the known
minimum size since the scalable property is already being taken into
account. Also, in TypeInfer::EnforceSameSize I fixed some implicit
TypeSize->uint64_t casts by changing the code to test the equality
of TypeSize objects instead.
In other places I have replaced calls to getSizeInBits() with
getFixedSizeInBits() because we are only ever expecting integer values.
Differential Revision: https://reviews.llvm.org/D88947
This makes diffing with the manual tables easier. And if we ever
directly use the autogenerated tables instead of the manual tables
we'll need them to be in sorted order for the binary search.
Apparenlty I added these in https://reviews.llvm.org/rL350628 but
I'm not sure why. They never existed in the CMake build, and now
they're causing trouble.
This patch adds support for assemble disassemble intrinsics
for MMA.
Reviewed By: bsaleil, #powerpc
Differential Revision: https://reviews.llvm.org/D88739
I recently had to run the test suite with a debug Python which got started
warning about some invalid escape sequences in LLDB's Python code. They all
attempt to add a backslash by doing a single backslash instead of a double
backslash in a normal string. This seems to work fine for now, but Python says
this behaviour is deprecated, so this patch turns all those strings into raw
strings (where a single backslash is actually a single backslash)
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D88289
Commit 6e56046f65 may trigger SEGV in llvm-tablegen if the latter
is built with -DLLVM_OPTIMIZED_TABLEGEN=OFF. The reason of SEGV was
accessing stale memory after expansion of std::vector.
It's built with just-built clang, like all other compiler-rt parts
in the GN build.
This requires adding some cross build support to the mac toolchain.
Also add explicit mmacosx-version-min and miphoneos-version-min
flags to the build.
ios.a is only built with the arm64 slice, iossim.a only with the
x86_64 slice for now. (The latter should maybe become host_cpu
when Arm Macs become a common iOS development platform.)
With this, it's possible to build chromium/iOS with a GN-built LLVM.
Differential Revision: https://reviews.llvm.org/D89260
Summary: Since willreturn will soon be added as default attribute, we can end up with both noreturn and willreturn on the same intrinsic. This was exposed by llvm.wasm.throw which has IntrNoReturn.
Reviewers: jdoerfert, arsenm
Differential Revision: https://reviews.llvm.org/D88644
The tests previously relied on the `short.py` and `FirstTest.subTestA`
script being executed on a machine within a short time window (1 or 2
seconds). While this "seems to work" it can fail on resource constrained
machines. We could bump the timeout a little bit (bumping it too
much would mean the test would take a long time to execute) but it wouldn't
really solve the problem of the test being prone to failures.
This patch tries to remove this flakeyness by separating testing into
two separate parts:
1. Testing if a test can hit a timeout.
2. Testing if a test can run to completion in the presence of a
timeout.
This way we can give (1.) a really short timeout (to make the test run
as fast as possible) and (2.) a really long timeout. This means for (2.)
we are no longer trying to rely on the "short" test executing within
some short time window. Instead the window is now 3600 seconds which
should be long enough even for a heavily resource constrained machine to
execute the "short" test.
Thanks to Julian Lettner for suggesting this approach. This superseeds
my original approach in https://reviews.llvm.org/D88807.
This patch also changes the command line override test to run the quick
test rather than the slow one to make the test run faster.
Differential Revision: https://reviews.llvm.org/D89020
This is a cherrypick of the upstream fix commit ffe1342 onto
`llvm/utils/benchmark` and `libcxx/utils/google-benchmark`.
This adds CycleTimer implementation for M680x0, which simply
uses `gettimeofday` same as MIPS.
Differential Review: https://reviews.llvm.org/D88868
This reverts b3418cb4eb and d12ae042e1
This breaks some external bots, see discussion in https://reviews.llvm.org/D84380
In the meanwhile, please use `cmake -DLLVM_LIT_TOOLS_DIR="C:/Program Files/Git/usr/bin"` or add it to %PATH%.
Summary:
This patch adds an error to Clang that detects if OpenMP offloading is
used between two architectures with incompatible pointer sizes. This
ensures that the data mapping can be done correctly and solves an issue
in code generation generating the wrong size pointer. This patch adds a
new lit substitution, %omp_powerpc_triple that, if the system is 32-bit or
64-bit, sets the powerpc triple accordingly. This was required to fix
some OpenMP tests that automatically populated the target architecture.
Reviewers: jdoerfert
Subscribers: cfe-commits guansong sstefan1 yaxunl delcypher
Tags: OpenMP clang LLVM
Differential Revision: https://reviews.llvm.org/D88594
This change implements generation of a function which may be used by a backend to check if a given instruction is supported for a specific subtarget.
Reviewers: sdesmalen
Differential Revision: https://reviews.llvm.org/D88214
When nesting INSERT_SUBREG and EXTRACT_SUBREG, GlobalISelEmitter would
fail to find the register class of the nested node. This patch fixes
that for registers with subregs.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D88487
This should fix the test failures on the clang win64 bot:
http://lab.llvm.org:8011/builders/clang-x64-windows-msvc/builds/18830
It has been red since Sept 23-ish.
This was subtle to debug. Windows has 'find' and 'sort' utilities in
C:\Windows\system32, but they don't support all the same flags as the
coreutils programs. I configured the buildbot above with Python 2.7
64-bit (hey, it was set up in 2016). When I installed git for Windows, I
opted to add all the Unix utilities that come with git to the system
PATH. This is *almost* enough to make the LLVM tests pass, but not
quite, because if you use the system PATH, the Windows version of find
and sort come first, but the tests that use diff, cmp, etc, will all
pass. So only a handful of tests will fail, and with cryptic error
messages.
The code changed in this CL doesn't work with Python 2. Before
Python 3.2, the winreg.OpenKey function did not accept the `access=`
keyword argument, the caller was required to pass an unused `reserved`
positional argument of 0. The try/except/pass around the OpenKey
operation masked this usage error in Python 2.
Further, the result of the registry operation has to be converted from
unicode to add it to the environment, but that was incidental.
Key Locker provides a mechanism to encrypt and decrypt data with an AES key without having access
to the raw key value by converting AES keys into “handles”. These handles can be used to perform the
same encryption and decryption operations as the original AES keys, but they only work on the current
system and only until they are revoked. If software revokes Key Locker handles (e.g., on a reboot),
then any previous handles can no longer be used.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D88398
Historically, we have told contributors that GnuWin32 is a pre-requisite
because our tests depend on utilities such as sed, grep, diff, and more.
However, Git on Windows includes versions of these utilities in its
installation. Furthermore, GnuWin32 has not been updated in many years.
For these reasons, it makes sense to have the ability to run llvm tests
in a way that is both:
a) Easier on the user (less stuff to install)
b) More up-to-date (The verions that ship with git are at least as
new, if not newer, than the versions in GnuWin32.
We add support for this here by attempting to detect where Git is
installed using the Windows registry, confirming the existence of
several common Unix tools, and then adding this location to lit's PATH
environment.
Differential Revision: https://reviews.llvm.org/D84380
This patch adds support for the lxvp, lxvpx, plxvp, stxvp, stxvpx and pstxvp
instructions in the PowerPC backend. These instructions allow loading and
storing VSX register pairs. This patch also adds the VSRp register class
definition needed for these instructions.
Differential Revision: https://reviews.llvm.org/D84359
Add the --include-generated-funcs option to update_cc_test_checks.py so that any
functions created by the compiler that don't exist in the source will also be
checked.
We need to maintain the output order of generated function checks so that
CHECK-LABEL works properly. To do so, maintain a list of functions output for
each prefix in the order they are output. Use this list to output checks for
generated functions in the proper order.
Differential Revision: https://reviews.llvm.org/D83004
When generating matching tables for GlobalISel, TableGen would output
"::zero_reg" whenever encountering the zero_reg, which in turn would
result in compilation error. This patch fixes that by instead outputting
NoRegister (== 0), which is the same result that TableGen produces when
generating matching tables for ISelDAG.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D86215
Arthur Eubanks