This pattern is visible in unrolled and vectorized loops.
Although the backend seems to be able to reassociate to
ideal form in the examples I looked at, we might as well
do that in IR for efficiency.
This bug was introduced with D105730 / 25ee55c0ba .
If we are not converting all of the operations of a reduction
into a vector op, we need to preserve the existing select form
of the remaining ops. Otherwise, we are potentially leaking
poison where it did not in the original code.
Alive2 agrees that the version that freezes some inputs
and then falls back to scalar is correct:
https://alive2.llvm.org/ce/z/erF4K2
`SinkCommonCodeFromPredecessors()` doesn't itself ensure that duplicate PHI nodes aren't created.
I suppose, we could teach it to do that on-the-fly (& account for the already-existing PHI nodes,
& adjust costmodel), the diff will be bigger than this.
The alternative is to schedule a new EarlyCSE pass invocation somewhere later in the pipeline.
Clearly, we don't have any EarlyCSE runs in module optimization passline, so this pattern isn't cleaned up...
That would perhaps better, but it will again have some compile time impact.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D106010
This has been a work-in-progress for a long time...we finally have all of
the pieces in place to handle vectorization of compare code as shown in:
https://llvm.org/PR41312
To do this (see PhaseOrdering tests), we converted SimplifyCFG and
InstCombine to the poison-safe (select) forms of the logic ops, so now we
need to have SLP recognize those patterns and insert a freeze op to make
a safe reduction:
https://alive2.llvm.org/ce/z/NH54Ah
We get the minimal patterns with this patch, but the PhaseOrdering tests
show that we still need adjustments to get the ideal IR in some or all of
the motivating cases.
Differential Revision: https://reviews.llvm.org/D105730
These are based on PR41312. There needs to be effort
from all of SimplifyCFG, InstCombine, SLP, and possibly
VectorCombine to get this into ideal form.
Based ontop of D104598, which is a NFCI-ish refactoring.
Here, a restriction, that only empty blocks can be merged, is lifted.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D104597
This is split off from D102002, and I think it is clear that
the difference in behavior was not intended. Options were
added to SimplifyCFG over time, but different chunks of
the pass pipelines were not kept in sync.
This was reverted due to performance regressions in ARM benchmarks,
which have since been addressed by D101196 (SCEV analysis improvement)
and D101778 (CGP reverse transform).
-----
The single-use case is handled implicity by converting the icmp
into a mask check first. When comparing with zero in particular,
we don't need the one-use restriction, as we only produce a single
icmp.
https://alive2.llvm.org/ce/z/MSixcmhttps://alive2.llvm.org/ce/z/GwpG0M
This is a patch that disables the poison-unsafe select -> and/or i1 folding.
It has been blocking D72396 and also has been the source of a few miscompilations
described in llvm.org/pr49688 .
D99674 conditionally blocked this folding and successfully fixed the latter one.
The former one was still blocked, and this patch addresses it.
Note that a few test functions that has `_logical` suffix are now deoptimized.
These are created by @nikic to check the impact of disabling this optimization
by copying existing original functions and replacing and/or with select.
I can see that most of these are poison-unsafe; they can be revived by introducing
freeze instruction. I left comments at fcmp + select optimizations (or-fcmp.ll, and-fcmp.ll)
because I think they are good targets for freeze fix.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D101191
This doesn't change anything currently, but as discussed in
D98981 and D98152, some tests may fail to vectorize because
the cost model becomes more accurate as we switch over to
using min/max intrinsics.
As discussed in:
https://llvm.org/PR49055
We invert instcombine's add->or transform here
because it makes it easier to identify factorization
transforms like the mul in the motivating test.
This extends the logic added with:
https://reviews.llvm.org/rG70472f3https://reviews.llvm.org/rG93f3d7f
(I intentionally kept the formatting fix in this patch
to provide more context about the calling logic.)
The upstream callers (the vectorizers) were fixed with:
bbed5f2f8a ( D95690 )
77adbe6a8c
We should remove this pass entirely now that reduction
legalization/lowering is expected to work just as well,
but we need to confirm that the shuffle ops do not
regress (for x86 in particular).
This should be the last step needed to close:
https://llvm.org/PR23116
Loop peeling removes conditions from loop bodies that become invariant
after a small number of iterations. When triggered, this leads to fewer
compares and possibly PHIs in loop bodies, enabling further
optimizations. The current cost-model of loop peeling should be quite
conservative/safe, i.e. only peel if a condition in the loop becomes
known after peeling.
For example, see PR47671, where loop peeling enables vectorization by
removing a PHI the vectorizer does not understand. Granted, the
loop-vectorizer could also be taught about constant PHIs, but loop
peeling is likely to enable other optimizations as well.
This has an impact on quite a few benchmarks from
MultiSource/SPEC2000/SPEC2006 on X86 with -O3 -flto, for example
Same hash: 186 (filtered out)
Remaining: 51
Metric: loop-vectorize.LoopsVectorized
Program base patch diff
test-suite...ve-susan/automotive-susan.test 8.00 9.00 12.5%
test-suite...nal/skidmarks10/skidmarks.test 35.00 31.00 -11.4%
test-suite...lications/sqlite3/sqlite3.test 41.00 43.00 4.9%
test-suite...s/ASC_Sequoia/AMGmk/AMGmk.test 25.00 26.00 4.0%
test-suite...006/450.soplex/450.soplex.test 88.00 89.00 1.1%
test-suite...TimberWolfMC/timberwolfmc.test 120.00 119.00 -0.8%
test-suite.../CINT2006/403.gcc/403.gcc.test 215.00 216.00 0.5%
test-suite...006/447.dealII/447.dealII.test 957.00 958.00 0.1%
test-suite...ternal/HMMER/hmmcalibrate.test 75.00 75.00 0.0%
Same hash: 186 (filtered out)
Remaining: 51
Metric: loop-vectorize.LoopsAnalyzed
Program base patch diff
test-suite...ks/Prolangs-C/agrep/agrep.test 440.00 434.00 -1.4%
test-suite...nal/skidmarks10/skidmarks.test 312.00 308.00 -1.3%
test-suite...marks/7zip/7zip-benchmark.test 6399.00 6323.00 -1.2%
test-suite...lications/minisat/minisat.test 134.00 135.00 0.7%
test-suite...rks/FreeBench/pifft/pifft.test 295.00 297.00 0.7%
test-suite...TimberWolfMC/timberwolfmc.test 1879.00 1869.00 -0.5%
test-suite...pplications/treecc/treecc.test 689.00 691.00 0.3%
test-suite...T2000/300.twolf/300.twolf.test 1593.00 1597.00 0.3%
test-suite.../Benchmarks/Bullet/bullet.test 1394.00 1392.00 -0.1%
test-suite...ications/JM/ldecod/ldecod.test 1431.00 1429.00 -0.1%
test-suite...6/464.h264ref/464.h264ref.test 2229.00 2230.00 0.0%
test-suite...lications/sqlite3/sqlite3.test 2590.00 2589.00 -0.0%
test-suite...ications/JM/lencod/lencod.test 2732.00 2733.00 0.0%
test-suite...006/453.povray/453.povray.test 3395.00 3394.00 -0.0%
Note the -11% regression in number of loops vectorized for skidmarks. I
suspect this corresponds to the fact that those loops are gone now (see
the reduction in number of loops analyzed by LV).
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D88471
In both cases, optimization is prevented because
"br X == C || X == C2" is converted into a switch. In one case
loop rotation is blocked, in the other vectorization.
We tend to assume that the AA pipeline is by default the default AA
pipeline and it's confusing when it's empty instead.
PR48779
Initially reverted due to BasicAA running analyses in an unspecified
order (multiple function calls as parameters), fixed by fetching
analyses before the call to construct BasicAA.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D95117
We tend to assume that the AA pipeline is by default the default AA
pipeline and it's confusing when it's empty instead.
PR48779
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D95117
After much refactoring over the last 2 weeks to the reduction
matching code, I think this change is finally ready.
We effectively broke fmax/fmin vector reduction optimization
when we started canonicalizing to intrinsics in instcombine,
so this should restore that functionality for SLP.
There are still FMF problems here as noted in the code comments,
but we should be avoiding miscompiles on those for fmax/fmin by
restricting to full 'fast' ops (negative tests are included).
Fixing FMF propagation is a planned follow-up.
Differential Revision: https://reviews.llvm.org/D94913
This patch makes SLP and LV emit operations with initial vectors set to poison constant instead of undef.
This is a part of efforts for using poison vector instead of undef to represent "doesn't care" vector.
The goal is to make nice shufflevector optimizations valid that is currently incorrect due to the tricky interaction between undef and poison (see https://bugs.llvm.org/show_bug.cgi?id=44185 ).
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D94061
As mentioned in D93793, there are quite a few places where unary `IRBuilder::CreateShuffleVector(X, Mask)` can be used
instead of `IRBuilder::CreateShuffleVector(X, Undef, Mask)`.
Let's update them.
Actually, it would have been more natural if the patches were made in this order:
(1) let them use unary CreateShuffleVector first
(2) update IRBuilder::CreateShuffleVector to use poison as a placeholder value (D93793)
The order is swapped, but in terms of correctness it is still fine.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D93923
This patch updates IRBuilder to create insertelement/shufflevector using poison as a placeholder.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D93793
This commit copies existing tests at llvm/Transforms containing
'shufflevector X, undef' and replaces them with 'shufflevector X, poison'.
The new copied tests have *-inseltpoison.ll suffix at its file name
(as db7a2f347f did)
See https://reviews.llvm.org/D93793
Test files listed using
grep -R -E "^[^;]*shufflevector <.*> .*, <.*> undef" | cut -d":" -f1 | uniq
Test files copied & updated using
file_org=llvm/test/Transforms/$1
if [[ "$file_org" = *-inseltpoison.ll ]]; then
file=$file_org
else
file=${file_org%.ll}-inseltpoison.ll
if [ ! -f $file ]; then
cp $file_org $file
fi
fi
sed -i -E 's/^([^;]*)shufflevector <(.*)> (.*), <(.*)> undef/\1shufflevector <\2> \3, <\4> poison/g' $file
head -1 $file | grep "Assertions have been autogenerated by utils/update_test_checks.py" -q
if [ "$?" == 1 ]; then
echo "$file : should be manually updated"
# The test is manually updated
exit 1
fi
python3 ./llvm/utils/update_test_checks.py --opt-binary=./build-releaseassert/bin/opt $file
Currently undef is used as a don’t-care vector when constructing a vector using a series of insertelement.
However, this is problematic because undef isn’t undefined enough.
Especially, a sequence of insertelement can be optimized to shufflevector, but using undef as its placeholder makes shufflevector a poison-blocking instruction because undef cannot be optimized to poison.
This makes a few straightforward optimizations incorrect, such as:
```
; https://bugs.llvm.org/show_bug.cgi?id=44185
define <4 x float> @insert_not_undef_shuffle_translate_commute(float %x, <4 x float> %y, <4 x float> %q) {
%xv = insertelement <4 x float> %q, float %x, i32 2
%r = shufflevector <4 x float> %y, <4 x float> %xv, <4 x i32> { 0, 6, 2, undef }
ret <4 x float> %r ; %r[3] is undef
}
=>
define <4 x float> @insert_not_undef_shuffle_translate_commute(float %x, <4 x float> %y, <4 x float> %q) {
%r = insertelement <4 x float> %y, float %x, i32 1
ret <4 x float> %r ; %r[3] = %y[3], incorrect if %y[3] = poison
}
Transformation doesn't verify!
ERROR: Target is more poisonous than source
```
I’d like to suggest
1. Using poison as insertelement’s placeholder value (IRBuilder::CreateVectorSplat should be patched too)
2. Updating shufflevector’s semantics to return poison element if mask is undef
Note that poison is currently lowered into UNDEF in SelDag, so codegen part is okay.
m_Undef() matches PoisonValue as well, so existing optimizations will still fire.
The only concern is hidden miscompilations that will go incorrect when poison constant is given.
A conservative way is copying all tests having `insertelement undef` & replacing it with `insertelement poison` & run Alive2 on it, but it will create many tests and people won’t like it. :(
Instead, I’ll simply locally maintain the tests and run Alive2.
If there is any bug found, I’ll report it.
Relevant links: https://bugs.llvm.org/show_bug.cgi?id=43958 , http://lists.llvm.org/pipermail/llvm-dev/2019-November/137242.html
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D93586
This commit copies existing tests at llvm/Transforms and replaces
'insertelement undef' in those files with 'insertelement poison'.
(see https://reviews.llvm.org/D93586)
Tests listed using this script:
grep -R -E '^[^;]*insertelement <.*> undef,' . | cut -d":" -f1 | uniq |
wc -l
Tests updated:
file_org=llvm/test/Transforms/$1
file=${file_org%.ll}-inseltpoison.ll
cp $file_org $file
sed -i -E 's/^([^;]*)insertelement <(.*)> undef/\1insertelement <\2> poison/g' $file
head -1 $file | grep "Assertions have been autogenerated by utils/update_test_checks.py" -q
if [ "$?" == 1 ]; then
echo "$file : should be manually updated"
# I manually updated the script
exit 1
fi
python3 ./llvm/utils/update_test_checks.py --opt-binary=./build-releaseassert/bin/opt $file
This patch enables canonicalization of SPF_ABS and SPF_ABS
to the abs intrinsic.
This is a recommit, the original try was
05d4c4ebc2,
but it was reverted due to an apparent miscompile,
which since then has just been fixed by the previous commit.
Differential Revision: https://reviews.llvm.org/D87188
Explicitly opt-out llvm/test/Transforms/Attributor.
Verified by flipping the default value of allow-unused-prefixes and
observing that none of the failures were under llvm/test/Transforms.
Differential Revision: https://reviews.llvm.org/D92404
Currently, `-indvars` runs first, and then immediately after `-loop-idiom` does.
I'm not really sure if `-loop-idiom` requires `-indvars` to run beforehand,
but i'm *very* sure that `-indvars` requires `-loop-idiom` to run afterwards,
as it can be seen in the phase-ordering test.
LoopIdiom runs on two types of loops: countable ones, and uncountable ones.
For uncountable ones, IndVars obviously didn't make any change to them,
since they are uncountable, so for them the order should be irrelevant.
For countable ones, well, they should have been countable before IndVars
for IndVars to make any change to them, and since SCEV is used on them,
it shouldn't matter if IndVars have already canonicalized them.
So i don't really see why we'd want the current ordering.
Should this cause issues, it will give us a reproducer test case
that shows flaws in this logic, and we then could adjust accordingly.
While this is quite likely beneficial in-the-wild already,
it's a required part for the full motivational pattern
behind `left-shift-until-bittest` loop idiom (D91038).
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D91800
I noticed an add example like the one from D91343, so here's a similar patch.
The logic is based on existing code for the single-use demanded bits fold.
But I only matched a constant instead of using compute known bits on the
operands because that was the motivating patterni that I noticed.
I think this will allow removing a special-case (but incomplete) dedicated
fold within visitAnd(), but I need to untangle the existing code to be sure.
https://rise4fun.com/Alive/V6fP
Name: add with low mask
Pre: (C1 & (-1 u>> countLeadingZeros(C2))) == 0
%a = add i8 %x, C1
%r = and i8 %a, C2
=>
%r = and i8 %x, C2
Differential Revision: https://reviews.llvm.org/D91415
Sanjay Patel