This prevents constant gep operands from being hoisted by the Constant
Hoisting pass, leaving them to CodegenPrepare which can usually do a
better job at splitting large offsets. This can, in general, improve
performance and decrease codesize, especially for v6m where many
constants have a high cost.
Differential Revision: https://reviews.llvm.org/D104877
If the incoming block to a phi node is an EH pad, then we will
materialize into an EH pad, which is not supposed to happen. To fix
this, I added a check to see if incoming block of a phi node is an EH
pad before using it as the insertion point.
Differential Revision: https://reviews.llvm.org/D95019
Summary:
Ignore looking at blocks that are unreachable from entry when
collecting candidates for hosting.
Normally the consthoist pass is executed in the llc pipeline,
just after unreachableblockelim. So it is abnormal to have code
that is unreachable from the entry block. But when running the
pass as part of opt, for example as part of fuzzy testing, we
might trigger various kinds of asserts when collecting candidates
if we include unreachable blocks in that analysis.
It seems like a waste of time to hoist constants in unreachble
blocks, so the solution is to simply ignore such blocks when
collecting the hoisting candidates.
The two added test cases used to end up in two different asserts,
and the intention with the checks is just to verify that we no
longer fail.
Fixes: PR43903
Reviewers: spatel
Reviewed By: spatel
Subscribers: hiraditya, uabelho, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71678
Currently, getIntImmCost returns TCC_Free for almost all intrinsics.
For most AArch64 specific intrinsics however, it looks like integer
constants cannot be folded into most of them (at least the ones I checked).
Unless we know that we can fold integer operands with the intrinsic, we
handle more cases correctly by returning the cost to materialize the
immediate than return TCC_Free.
Reviewers: SjoerdMeijer, dmgreen, t.p.northover, ributzka
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D70669
APInt::getSExtValue will assert if getMinSignedBits() > 64. This can happen,
for instance, if examining an i128. Avoid this assertion by checking
Imm.getMinSignedBits() <= 64 before doing
getTLI()->isLegalAddImmediate(Imm.getSExtValue()). We could directly check
getMinSignedBits() <= 12 but it seems better to reuse the isLegalAddImmediate
helper for this.
Differential Revision: https://reviews.llvm.org/D64390
llvm-svn: 365462
Summary:
LLVM Allows Targets to provide information that guides optimisations
made to LLVM IR. This is done with callbacks on a TargetTransformInfo object.
This patch adds a TargetTransformInfo class for RISC-V. This will allow us to
implement RISC-V specific callbacks as they become necessary.
This commit also adds the getIntImmCost callbacks, and tests them with a simple
constant hoisting test. Our immediate costs are on the conservative side, for
the moment, but we prevent hoisting in most circumstances anyway.
Previous review was on D63007
Reviewers: asb, luismarques
Reviewed By: asb
Subscribers: ributzka, MaskRay, llvm-commits, Jim, benna, psnobl, jocewei, PkmX, rkruppe, the_o, brucehoult, MartinMosbeck, rogfer01, edward-jones, zzheng, jrtc27, shiva0217, kito-cheng, niosHD, sabuasal, apazos, simoncook, johnrusso, rbar, hiraditya, mgorny
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63433
llvm-svn: 364046
As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
llvm-svn: 358546
Summary:
Enable some of the existing size optimizations for cold code under PGO.
A ~5% code size saving in big internal app under PGO.
The way it gets BFI/PSI is discussed in the RFC thread
http://lists.llvm.org/pipermail/llvm-dev/2019-March/130894.html
Note it doesn't currently touch loop passes.
Reviewers: davidxl, eraman
Reviewed By: eraman
Subscribers: mgorny, javed.absar, smeenai, mehdi_amini, eraman, zzheng, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59514
llvm-svn: 358422
I'm not too familiar with this pass, so there might be a better
solution, but this appears to fix the degenerate:
PR40930
PR40931
PR40932
PR40934
...without affecting any real-world code.
As we've seen in several other passes, when we have unreachable blocks,
they can contain semi-bogus IR and/or cause unexpected conditions. We
would not typically expect these patterns to make it this far, but we
have to guard against them anyway.
llvm-svn: 355337
Summary:
ConstIntInfoVec contains elements extracted from the previous function.
In new PM, releaseMemory() is not called and the dangling elements can
cause segfault in findConstantInsertionPoint.
Rename releaseMemory() to cleanup() to deliver the idea that it is
mandatory and call cleanup() in ConstantHoistingPass::runImpl to fix
this.
Reviewers: ormris, zzheng, dmgreen, wmi
Reviewed By: ormris, wmi
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58589
llvm-svn: 355174
DIV/REM by constants should always be expanded into mul/shift/etc.
patterns. Unfortunately the ConstantHoisting pass runs too early at a
point where the pattern isn't expanded yet. However after
ConstantHoisting hoisted some immediate the result may not expand
anymore. Also the hoisting typically doesn't make sense because it
operates on immediates that will change completely during the expansion.
Report DIV/REM as TCC_Free so ConstantHoisting will not touch them.
Differential Revision: https://reviews.llvm.org/D53174
llvm-svn: 344315
Reland r341269. Use std::stable_sort when sorting constant condidates.
Reverting commit, r341365:
Revert r341269: [Constant Hoisting] Hoisting Constant GEP Expressions
One of the tests is failing 50% of the time when expensive checks are
enabled. Not sure how deep the problem is so just reverting while the
author can investigate so that the bots stop repeatedly failing and
blaming things incorrectly. Will respond with details on the original
commit.
Original commit, r341269:
[Constant Hoisting] Hoisting Constant GEP Expressions
Leverage existing logic in constant hoisting pass to transform constant GEP
expressions sharing the same base global variable. Multi-dimensional GEPs are
rewritten into single-dimensional GEPs.
https://reviews.llvm.org/D51396
Differential Revision: https://reviews.llvm.org/D51654
llvm-svn: 341417
One of the tests is failing 50% of the time when expensive checks are
enabled. Not sure how deep the problem is so just reverting while the
author can investigate so that the bots stop repeatedly failing and
blaming things incorrectly. Will respond with details on the original
commit.
llvm-svn: 341365
Leverage existing logic in constant hoisting pass to transform constant GEP
expressions sharing the same base global variable. Multi-dimensional GEPs are
rewritten into single-dimensional GEPs.
Differential Revision: https://reviews.llvm.org/D51396
llvm-svn: 341269
In Thumb1, legal imm range is [0, 255] for ADD/SUB instructions. However, the
legal imm range for LD/ST in (R+Imm) addressing mode is [0, 127]. Imms in
[128, 255] are materialized by mov R, #imm, and LD/STs use them in (R+R)
addressing mode.
This patch checks if a constant is used as offset in (R+Imm), if so, it checks
isLegalAddressingMode passing the constant value as BaseOffset.
Differential Revision: https://reviews.llvm.org/D50931
llvm-svn: 340882
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
When the Constant Hoisting pass moves expensive constants into a
common block, it would assign a debug location equal to the last use
of that constant. While this is certainly intuitive, it places the
constant in an out-of-order location, according to the debug location
information. This produces out-of-order stepping when debugging
programs affected by this pass.
This patch creates in-order stepping behavior by merging the debug
locations for hoisted constants, and the new insertion point.
Patch by Matthew Voss!
Differential Revision: https://reviews.llvm.org/D38088
llvm-svn: 317827
Summary:
As metioned in https://reviews.llvm.org/D34576, checkings in
`collectConstantCandidates` can be replaced by using
`llvm::canReplaceOperandWithVariable`.
The only special case is that `collectConstantCandidates` return false for
all `IntrinsicInst` but it is safe for us to collect constant candidates from
`IntrinsicInst`.
Reviewers: pirama, efriedma, srhines
Reviewed By: efriedma
Subscribers: llvm-commits, javed.absar
Differential Revision: https://reviews.llvm.org/D34921
llvm-svn: 307587
Using profile information to guide consthoisting is generally helpful for
performance, so the patch turns it on by default. No compile time or perf
regression were found using spec2000 and spec2006 on x86. Some significant
improvement (>20%) was seen on internal benchmarks.
Differential Revision: https://reviews.llvm.org/D35063
llvm-svn: 307338
Summary:
Indices for GEPs that index into a struct type should always be
constants. This added more checks in `collectConstantCandidates:` which make
sure constants for GEP pointer type are not hoisted.
This fixed Bug https://bugs.llvm.org/show_bug.cgi?id=33538
Reviewers: ributzka, rnk
Reviewed By: ributzka
Subscribers: efriedma, llvm-commits, srhines, javed.absar, pirama
Differential Revision: https://reviews.llvm.org/D34576
llvm-svn: 306704
places based on it.
Existing constant hoisting pass will merge a group of contants in a small range
and hoist the const materialization code to the common dominator of their uses.
However, if the uses are all in cold pathes, existing implementation may hoist
the materialization code from cold pathes to a hot place. This may hurt performance.
The patch introduces BFI to the pass and selects the best insertion places based
on it.
The change is controlled by an option consthoist-with-block-frequency which is
off by default for now.
Differential Revision: https://reviews.llvm.org/D28962
llvm-svn: 300989
Now that terminators can be EH pads, this code needs to iterate over the
immediate dominators of the EH pad to find a valid insertion point.
Fix for PR32107
Patch by Robert Olliff!
Differential Revision: https://reviews.llvm.org/D30511
llvm-svn: 296698
constant hoisting. It not only takes into account the number of uses and the
cost of expressions in which constants appear, but now also the resulting
integer range of the offsets. Thus, the algorithm maximizes the number of uses
within an integer range that will enable more efficient code generation. On
ARM, for example, this will enable code size optimisations because less
negative offsets will be created. Negative offsets/immediates are not supported
by Thumb1 thus preventing more compact instruction encoding.
Differential Revision: http://reviews.llvm.org/D21183
llvm-svn: 275382
Summary:
This fixes bug: https://llvm.org/bugs/show_bug.cgi?id=28282
Currently the cost model of constant hoisting checks the bit width of the data type of the constants.
However, the actual immediate value is small enough and not need to be hoisted.
This patch checks for the actual bit width needed for the constant.
Reviewers: t.p.northover, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D21668
llvm-svn: 274073
Divisions by a constant can be converted into multiplies which are usually
cheaper, but this isn't possible if the constant gets separated (particularly
in loops). Fix this by telling ConstantHoisting that the immediate in a DIV is
cheap.
I considered making the check generic, but neither AArch64 (strangely) nor x86
showed any benefit on the tests I had.
llvm-svn: 266464
At some point, ARM stopped getting any benefit from ConstantHoisting because
the pass called a different variant of getIntImmCost. Reimplementing the
correct variant revealed some problems, however:
+ ConstantHoisting was modifying switch statements. This is simply invalid,
the cases must remain integer constants no matter the notional cost.
+ ConstantHoisting was mangling alloca instructions in the entry block. These
should be handled by FrameLowering, so constants actually have a cost of 0.
Worse, the resulting bitcasts meant they became dynamic allocas.
rdar://25707382
llvm-svn: 266260
See r230786 and r230794 for similar changes to gep and load
respectively.
Call is a bit different because it often doesn't have a single explicit
type - usually the type is deduced from the arguments, and just the
return type is explicit. In those cases there's no need to change the
IR.
When that's not the case, the IR usually contains the pointer type of
the first operand - but since typed pointers are going away, that
representation is insufficient so I'm just stripping the "pointerness"
of the explicit type away.
This does make the IR a bit weird - it /sort of/ reads like the type of
the first operand: "call void () %x(" but %x is actually of type "void
()*" and will eventually be just of type "ptr". But this seems not too
bad and I don't think it would benefit from repeating the type
("void (), void () * %x(" and then eventually "void (), ptr %x(") as has
been done with gep and load.
This also has a side benefit: since the explicit type is no longer a
pointer, there's no ambiguity between an explicit type and a function
that returns a function pointer. Previously this case needed an explicit
type (eg: a function returning a void() function was written as
"call void () () * @x(" rather than "call void () * @x(" because of the
ambiguity between a function returning a pointer to a void() function
and a function returning void).
No ambiguity means even function pointer return types can just be
written alone, without writing the whole function's type.
This leaves /only/ the varargs case where the explicit type is required.
Given the special type syntax in call instructions, the regex-fu used
for migration was a bit more involved in its own unique way (as every
one of these is) so here it is. Use it in conjunction with the apply.sh
script and associated find/xargs commands I've provided in rr230786 to
migrate your out of tree tests. Do let me know if any of this doesn't
cover your cases & we can iterate on a more general script/regexes to
help others with out of tree tests.
About 9 test cases couldn't be automatically migrated - half of those
were functions returning function pointers, where I just had to manually
delete the function argument types now that we didn't need an explicit
function type there. The other half were typedefs of function types used
in calls - just had to manually drop the * from those.
import fileinput
import sys
import re
pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)')
addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$")
func_end = re.compile("(?:void.*|\)\s*)\*$")
def conv(match, line):
if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)):
return line
return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():]
for line in sys.stdin:
sys.stdout.write(conv(re.search(pat, line), line))
llvm-svn: 235145
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
llvm-svn: 230794
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
This improves the X86 cost model for small constants with large types. Before
this commit we would even hoist trivial constants such as i96 2.
This is related to <rdar://problem/17070936>
llvm-svn: 210504
This commit starts with a "git mv ARM64 AArch64" and continues out
from there, renaming the C++ classes, intrinsics, and other
target-local objects for consistency.
"ARM64" test directories are also moved, and tests that began their
life in ARM64 use an arm64 triple, those from AArch64 use an aarch64
triple. Both should be equivalent though.
This finishes the AArch64 merge, and everyone should feel free to
continue committing as normal now.
llvm-svn: 209577
Currently the X86 backend doesn't support types larger than i128 very well. For
example an i192 multiply will assert in codegen when the 2nd argument is a constant and the constant got hoisted.
This fix changes the cost model to never hoist constants for types larger than
i128. Once the codegen issues have been resolved, the cost model can be updated
to allow also larger types.
This is related to <rdar://problem/16954938>
llvm-svn: 209162
There is no need to check if we want to hoist the immediate value of an
shift instruction. Simply return TCC_Free right away.
This change is like r206101, but for X86.
rdar://problem/16190769
llvm-svn: 207692
In the case where the constant comes from a cloned cast instruction, the
materialization code has to go before the cloned cast instruction.
This commit fixes the method that finds the materialization insertion point
by making it aware of this case.
This fixes <rdar://problem/15532441>
llvm-svn: 206913
Implements the various TTI functions to enable constant hoisting on PPC. The
only significant test-suite change is this:
MultiSource/Benchmarks/VersaBench/bmm/bmm - 20% speedup
(which essentially reverses the slowdown from r206120).
llvm-svn: 206141
Originally the cost model would give up for large constants and just return the
maximum cost. This is not what we want for constant hoisting, because some of
these constants are large in bitwidth, but are still cheap to materialize.
This commit fixes the cost model to either return TCC_Free if the cost cannot be
determined, or accurately calculate the cost even for large constants
(bitwidth > 128).
This fixes <rdar://problem/16591573>.
llvm-svn: 206100
The immediate cost calculation code was hitting an assertion in the included
test case, because APInt was still internally 128-bits. Truncating it to 64-bits
fixed the issue.
Fixes <rdar://problem/16572521>.
llvm-svn: 205947
This implements the target-hooks for ARM64 to enable constant hoisting.
This fixes <rdar://problem/14774662> and <rdar://problem/16381500>.
llvm-svn: 205791
David Green