This restores commit 80d0a137a5, and the
follow on fix in 873c0d0786, with a new
fix for test failures after a 2-stage clang bootstrap, and a more robust
fix for the Chromium build failure that an earlier version partially
fixed. See also discussion on D75201.
Reviewers: evgeny777
Subscribers: mehdi_amini, Prazek, hiraditya, steven_wu, dexonsmith, arphaman, davidxl, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73242
The legacy pass is called "loop-unroll", but in the new PM it's called "unroll".
Also applied to unroll-and-jam and unroll-full.
Fixes various check-llvm tests when NPM is turned on.
Reviewed By: Whitney, dmgreen
Differential Revision: https://reviews.llvm.org/D82590
Summary:
In order to enable mass testing of opt under NPM, specifically passes
specified via -foo-pass.
This is gated under a new opt flag -enable-new-pm. Currently
the pass flag parser looks for legacy PM passes with the name "foo" (for
opt arg "-foo") and creates a PassInfo for each one. Here we take the
(legacy PM) pass name and try to match it with one defined in (NPM)
PassRegistry.def. Ultimately if we want all tests to pass like this,
we'll need to port all passes to NPM and register them in
PassRegistry.def under the same name as they were reigstered in the
legacy PM.
Maybe at some point we'll migrate all -foo to --passes=foo, but that
would be after the NPM switch.
Flipping on the flag causes 2XXX failures under check-llvm. By far most
of them are passes either not ported to NPM or don't have the same name
in PassRegistry.def as their old name.
Reviewers: hans, echristo, asbirlea, leonardchan
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82320
Summary:
Currently when --passes is used, any passes specified via -foo are
ignored. Explicitly bail out when that happens.
This requires changing some tests. Most were straightforward, but
codegenprepare-produced-address-math.ll is tricky. One of its RUNs runs
CodeGenPrepare. I tried porting CodeGenPrepare to the NPM, but ended up
getting stuck when I needed a TargetMachine. NPM doesn't have support
for MachineFunctions yet. So I just deleted that RUN line, since it was
mass-added in https://reviews.llvm.org/D54848 and is likely not that
useful.
Reviewers: echristo, hans
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82271
This patch introduces the heat coloring of the Call Printer which is based
on the relative "hotness" of each function. The patch is a part of sequence of
three patches, related to graphs Heat Coloring.
Another feature added is the flag similar to "-cfg-dot-filename-prefix",
which allows to write the graph into a named .pdf
Reviewers: rcorcs, apilipenko, davidxl, sfertile, fedor.sergeev, eraman, bollu
Differential Revision: https://reviews.llvm.org/D77172
As noted in D80236 - the early-cse pass was included here before:
D75145 / rG71a316883d50
But it got moved outside of the "extra" option there, then it
got dropped while adjusting -vector-combine:
rG6438ea45e053
rG57bb4787d72f
So this is restoring the behavior and adding a test to prevent
accidental changes again. I don't see an equivalent option for
the new pass manager.
EarlyCSE was added with D75145, but the motivating test is
not regressed by removing the extra pass now. That might be
because VectorCombine altered the way it processes instructions,
or it might be from (re)moving VectorCombine in the pipeline.
The extra round of EarlyCSE appears to cost approximately
0.26% in compile-time as discussed in D80236, so we need some
evidence to justify its inclusion here, but we do not have
that (yet).
I suspect that between SLP and VectorCombine, we are creating
patterns that InstCombine and/or codegen are not prepared for,
but we will need to reduce those examples and include them as
PhaseOrdering and/or test-suite benchmarks.
As noted in D80236, moving the pass in the pipeline exposed this
shortcoming. Extra work to recalculate the alias results showed
up as a compile-time slowdown.
There are 2 known problem patterns shown in the test diffs here:
vector horizontal ops (an x86 specialization) and vector reductions.
SLP has greater ability to match and fold those than vector-combine,
so let SLP have first chance at that.
This is a quick fix while we continue to improve vector-combine and
possibly canonicalize to reduction intrinsics.
In the longer term, we should improve matching of these patterns
because if they were created in the "bad" forms shown here, then we
would miss optimizing them.
I'm not sure what is happening with alias analysis on the addsub test.
The old pass manager now shows an extra line for that, and we see an
improvement that comes from SLP vectorizing a store. I don't know
what's missing with the new pass manager to make that happen.
Strangely, I can't reproduce the behavior if I compile from C++ with
clang and invoke the new PM with "-fexperimental-new-pass-manager".
Differential Revision: https://reviews.llvm.org/D80236
Summary:
This change introduces InliningAdvisor (and related APIs), the interface
that abstracts decision making away from the inlining pass. We will use
this interface to delegate decision making to a trained ML model,
subsequently (see referenced RFC).
RFC: http://lists.llvm.org/pipermail/llvm-dev/2020-April/140763.html
Reviewers: davidxl, eraman, dblaikie
Subscribers: mgorny, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79042
Summary:
As commented in the code, ProfileSummaryAnalysis is required for inliner
pass to query, so this patch moved
RequireAnalysisPass<ProfileSummaryAnalysis> in the recently created
buildInlinerPipeline.
Reviewer: mtrofin, davidxl, tejohnson, dblaikie, jdoerfert, sstefan1
Reviewed By: mtrofin, davidxl, jdoerfert
Subscribers: hiraditya, steven_wu, dexonsmith, wuzish, llvm-commits,
jsji
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D79696
Summary: Currenlty BPI unconditionally creates post dominator tree each time. While this is not incorrect we can save compile time by reusing existing post dominator tree (when it's valid) provided by analysis manager.
Reviewers: skatkov, taewookoh, yrouban
Reviewed By: skatkov
Subscribers: hiraditya, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78987
Summary:
This simplifies testing in scenarios where we want to set up module-wide
analyses for inlining. The patch enables treating inlining and its
function cleanups, as a module pass. The alternative would be for tests
to describe the pipeline, which is tedious and adds maintenance
overhead.
Reviewers: davidxl, dblaikie, jdoerfert, sstefan1
Subscribers: hiraditya, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78512
This patch introduces the heat coloring of the Control Flow Graph which is based
on the relative "hotness" of each BB. The patch is a part of sequence of three
patches, related to graphs Heat Coloring.
Reviewers: rcorcs, apilipenko, davidxl, sfertile, fedor.sergeev, eraman, bollu
Differential Revision: https://reviews.llvm.org/D77161
This pass is created in d6de5f12d4 and tested
for new and legacy pass manager but never added to new pass manager pipeline.
I am adding it to new pass manager pipeline.
This pass is get used in Vector Function Database (VFDatabase) and without
this pass in new pass manager pipeline, none of the vector libraries are work
ing with new pass manager.
Related passes:
66c120f025https://reviews.llvm.org/D74944
Differential revision: https://reviews.llvm.org/D75354
The new and old pass managers (PassManagerBuilder.cpp and
PassBuilder.cpp) are exposed to an `extern` declaration of
`attributor-disable` option which will guard the addition of the
attributor passes to the pass pipelines.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D76871
Summary:
CGProfilePass is run by default in certain new pass manager optimization pipeline. Assemblers other than llvm as (such as gnu as) cannot recognize the .cgprofile entries generated and emitted from this pass, causing build time error.
This patch adds new options in clang CodeGenOpts and PassBuilder options so that we can turn cgprofile off when not using integrated assembler.
Reviewers: Bigcheese, xur, george.burgess.iv, chandlerc, manojgupta
Reviewed By: manojgupta
Subscribers: manojgupta, void, hiraditya, dexonsmith, llvm-commits, tcwang, llozano
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D62627
It seems like the SLPVectorizer is currently not aware of vector
versions of functions provided by libraries like Accelerate [1].
This patch updates SLPVectorizer to use the same infrastructure
the LoopVectorizer uses to detect vectorizable library functions.
For calls, it computes the cost of an intrinsic call (existing behavior)
and the cost of a vector function library call, if available. Like
LoopVectorizer, it assumes the cost of the vector function is simply the
cost of a call to a vector function.
[1] https://developer.apple.com/documentation/accelerate
Reviewers: ABataev, RKSimon, spatel
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D75878
With the addition of the LLD time tracing it made sense to include coverage
for LLVM's various passes. Doing so ensures that ThinLTO is also covered
with a time trace.
Before:
{F11333974}
After:
{F11333928}
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D74516
The initial placement of vector-combine in the opt pipeline revealed phase ordering bugs:
https://bugs.llvm.org/show_bug.cgi?id=45015https://bugs.llvm.org/show_bug.cgi?id=42022
This patch contains a few independent changes:
1. Move the pass up in the pipeline, so it happens just after loop-vectorization.
This is only to keep vectorization passes together in the pipeline at the moment.
I don't have evidence of interaction between these yet.
2. Add an -early-cse pass after -vector-combine to clean up redundant ops. This was
partly proposed as far back as rL219644 (which is why it's effectively being moved
in the old PM code). This is important because the subsequent -instcombine doesn't
work as well without EarlyCSE. With the CSE, -instcombine is able to squash
shuffles together in 1 of the tests (because those are simple "select" shuffles).
3. Remove the -vector-combine pass that was running after SLP. We may want to do that
eventually, but I don't have a test case to support it yet.
Differential Revision: https://reviews.llvm.org/D75145
This reverts commit 80d0a137a5, and the
follow on fix in 873c0d0786. It is
causing test failures after a multi-stage clang bootstrap. See
discussion on D73242 and D75201.
Summary:
The IR printing always prints out all functions in a module with the new pass manager, even with -filter-print-funcs specified. This is being fixed in this change. However, there are two exceptions, i.e, with user-specified wildcast switch -filter-print-funcs=* or -print-module-scope, under which IR of all functions should be printed.
Test Plan:
make check-clang
make check-llvm
Reviewers: wenlei
Reviewed By: wenlei
Subscribers: wenlei, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74814
Added two flags to omit uncommon or dead paths in the CFG graphs:
-cfg-hide-unreachable-paths
-cfg-hide-deoptimize-paths
The main purpose is performance analysis when such block are not
"interesting" from perspective of common path performance.
Reviewed By: apilipenko, davidxl
Differential Revision: https://reviews.llvm.org/D74346
Summary:
Potential fix for: https://bugs.llvm.org/show_bug.cgi?id=44889 and https://bugs.llvm.org/show_bug.cgi?id=44408
In the legacy pass manager, loop rotate need not compute MemorySSA when not being in the same loop pass manager with other loop passes.
There isn't currently a way to differentiate between the two cases, so this attempts to limit the usage in LoopRotate to only update MemorySSA when the analysis is already available.
The side-effect of this is that it will split the Loop pipeline.
This issue does not apply to the new pass manager, where we have a flag specifying if all loop passes in that loop pass manager preserve MemorySSA.
Reviewers: dmgreen, fedor.sergeev, nikic
Subscribers: Prazek, hiraditya, george.burgess.iv, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74574
This reverts commit 80a34ae311 with fixes.
Previously, since bots turning on EXPENSIVE_CHECKS are essentially turning on
MachineVerifierPass by default on X86 and the fact that
inline-asm-avx-v-constraint-32bit.ll and inline-asm-avx512vl-v-constraint-32bit.ll
are not expected to generate functioning machine code, this would go
down to `report_fatal_error` in MachineVerifierPass. Here passing
`-verify-machineinstrs=0` to make the intent explicit.
This reverts commit 80a34ae311 with fixes.
On bots llvm-clang-x86_64-expensive-checks-ubuntu and
llvm-clang-x86_64-expensive-checks-debian only,
llc returns 0 for these two tests unexpectedly. I tweaked the RUN line a little
bit in the hope that LIT is the culprit since this change is not in the
codepath these tests are testing.
llvm\test\CodeGen\X86\inline-asm-avx-v-constraint-32bit.ll
llvm\test\CodeGen\X86\inline-asm-avx512vl-v-constraint-32bit.ll
Summary:
Passes ORE, BPI, BFI are not being preserved by Loop passes, hence it
is incorrect to retrieve these passes as cached.
This patch makes the loop passes in question compute a new instance.
In some of these cases, however, it may be beneficial to change the Loop pass to
a Function pass instead, similar to the change for LoopUnrollAndJam.
Reviewers: chandlerc, dmgreen, jdoerfert, reames
Subscribers: mehdi_amini, hiraditya, zzheng, steven_wu, dexonsmith, Whitney, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72891
This reverts commit rGcd5b308b828e, rGcd5b308b828e, rG8cedf0e2994c.
There are issues to be investigated for polly bots and bots turning on
EXPENSIVE_CHECKS.
Summary:
Part of the changes in D44564 made BasicAA not CFG only due to it using
PhiAnalysisValues which may have values invalidated.
Subsequent patches (rL340613) appear to have addressed this limitation.
BasicAA should not be invalidated by non-CFG-altering passes.
A concrete example is MemCpyOpt which preserves CFG, but we are testing
it invalidates BasicAA.
llvm-dev RFC: https://groups.google.com/forum/#!topic/llvm-dev/eSPXuWnNfzM
Reviewers: john.brawn, sebpop, hfinkel, brzycki
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74353
This restores commit 748bb5a0f1, along
with a fix for a Chromium test suite build issue (and a new test for
that case).
Differential Revision: https://reviews.llvm.org/D73242
We have several bug reports that could be characterized as "reducing scalarization",
and this topic was also raised on llvm-dev recently:
http://lists.llvm.org/pipermail/llvm-dev/2020-January/138157.html
...so I'm proposing that we deal with these patterns in a new, lightweight IR vector
pass that runs before/after other vectorization passes.
There are 4 alternate options that I can think of to deal with this kind of problem
(and we've seen various attempts at all of these), but they all have flaws:
InstCombine - can't happen without TTI, but we don't want target-specific
folds there.
SDAG - too late to assist other vectorization passes; TLI is not equipped
for these kind of cost queries; limited to a single basic block.
CGP - too late to assist other vectorization passes; would need to re-implement
basic cleanups like CSE/instcombine.
SLP - doesn't fit with existing transforms; limited to a single basic block.
This initial patch/transform is based on existing code in AggressiveInstCombine:
we walk backwards through the function looking for a pattern match. But we diverge
from that cost-independent IR canonicalization pass by using TTI to decide if the
vector alternative is profitable.
We probably have at least 10 similar bug reports/patterns (binops, constants,
inserts, cheap shuffles, etc) that would fit in this pass as follow-up enhancements.
It's possible that we could iterate on a worklist to fix-point like InstCombine does,
but it's safer to start with a most basic case and evolve from there, so I didn't
try to do anything fancy with this initial implementation.
Differential Revision: https://reviews.llvm.org/D73480
In addition to the module pass, this patch introduces a CGSCC pass that
runs the Attributor on a strongly connected component of the call graph
(both old and new PM). The Attributor was always design to be used on a
subset of functions which makes this patch mostly mechanical.
The one change is that we give up `norecurse` deduction in the module
pass in favor of doing it during the CGSCC pass. This makes the
interfaces simpler but can be revisited if needed.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D70767
The OpenMPOpt pass is a CGSCC pass in which OpenMP specific
optimizations can reside.
The OpenMPOpt pass uses the OpenMPKinds.def file to identify runtime
calls and their uses. This allows targeted transformations and eases
their implementation.
This initial patch deduplicates `__kmpc_global_thread_num` and
`omp_get_thread_num` calls. We can also identify arguments that are
equivalent to such a call result and use it instead. Later we can
determine "gtid" arguments based on the use in kernel functions etc.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D69930
Summary:
Currently type test assume sequences inserted for devirtualization are
removed during WPD. This patch delays their removal until later in the
optimization pipeline. This is an enabler for upcoming enhancements to
indirect call promotion, for example streamlined promotion guard
sequences that compare against vtable address instead of the target
function, when there are small number of possible vtables (either
determined via WPD or by in-progress type profiling). We need the type
tests to correlate the callsites with the address point offset needed in
the compare sequence, and optionally to associated type summary info
computed during WPD.
This depends on work in D71913 to enable invocation of LowerTypeTests to
drop type test assume sequences, which will now be invoked following ICP
in the ThinLTO post-LTO link pipelines, and also after the existing
export phase LowerTypeTests invocation in regular LTO (which is already
after ICP). We cannot simply move the existing import phase
LowerTypeTests pass later in the ThinLTO post link pipelines, as the
comment in PassBuilder.cpp notes (it must run early because when
performing CFI other passes may disturb the sequences it looks for).
This necessitated adding a new type test resolution "Unknown" that we
can use on the type test assume sequences previously removed by WPD,
that we now want LTT to ignore.
Depends on D71913.
Reviewers: pcc, evgeny777
Subscribers: mehdi_amini, Prazek, hiraditya, steven_wu, dexonsmith, arphaman, davidxl, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73242
The code paths in the absence of TargetMachine, TargetLowering or
TargetRegisterInfo are poorly tested. As rL285987 said, requiring
TargetPassConfig allows us to delete many (untested) checks littered
everywhere.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D73754
Summary:
This is a follow up on D61634. It adds an LLVM IR intrinsic to allow better implementation of memcpy from C++.
A follow up CL will add the intrinsics in Clang.
Reviewers: courbet, theraven, t.p.northover, jdoerfert, tejohnson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71710
Summary:
This commits is a rework of the patch in
https://reviews.llvm.org/D67572.
The rework was requested to prevent out-of-tree performance regression
when vectorizing out-of-tree IR intrinsics. The vectorization of such
intrinsics is enquired via the static function `isTLIScalarize`. For
detail see the discussion in https://reviews.llvm.org/D67572.
Reviewers: uabelho, fhahn, sdesmalen
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72734
Summary:
This patch could be treated as a rebase of D33960. It also fixes PR35547.
A fix for `llvm/test/Other/close-stderr.ll` is proposed in D68164. Seems
the consensus is that the test is passing by chance and I'm not
sure how important it is for us. So it is removed like in D33960 for now.
The rest of the test fixes are just adding `--crash` flag to `not` tool.
** The reason it fixes PR35547 is
`exit` does cleanup including calling class destructor whereas `abort`
does not do any cleanup. In multithreading environment such as ThinLTO or JIT,
threads may share states which mostly are ManagedStatic<>. If faulting thread
tearing down a class when another thread is using it, there are chances of
memory corruption. This is bad 1. It will stop error reporting like pretty
stack printer; 2. The memory corruption is distracting and nondeterministic in
terms of error message, and corruption type (depending one the timing, it
could be double free, heap free after use, etc.).
Reviewers: rnk, chandlerc, zturner, sepavloff, MaskRay, espindola
Reviewed By: rnk, MaskRay
Subscribers: wuzish, jholewinski, qcolombet, dschuff, jyknight, emaste, sdardis, nemanjai, jvesely, nhaehnle, sbc100, arichardson, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, lenary, s.egerton, pzheng, cfe-commits, MaskRay, filcab, davide, MatzeB, mehdi_amini, hiraditya, steven_wu, dexonsmith, rupprecht, seiya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D67847
Append this to the existing target-features attribute on the function.
Some flags ignore existing attributes, and some overwrite them. Move
towards consistently respecting existing attributes if present. Since
target features act as a state machine on their own, append to the
function attribute. The backend default added feature list, function
attributes, and -mattr will all be appended together, and the later
features can individually toggle the earlier settings.
I noticed one bot failure due to
24a00ef240 because the wildcard matching
was not working as intended, fixed it to act similar to other checks of
CGSCCToFunctionPassAdaptor.
This restores 2af97be802 (reverted at
6288f86e87), with all the fixes I had
applied at the time, along with a new fix for non-determinism in the
ordering of a couple of passes due to being accessed as parameters on
the same call.
I've also added --dump-input=fail to the new tests so I can more
thoroughly fix any additional failures.
This reverts commit 2af97be802.
After attempting to fix bot failures from matching issues (mostly due to
inconsistent printing of "llvm::" prefixes on objects, and
AnalysisManager objects being printed differntly, I am now seeing some
differences I don't understand (real differences in the passes being
printed). Giving up at this point to allow the bots to recover. Will
revisit later.
Along with the previous fix for bot failures from
2af97be802, need to add a wildcard in a
couple of places where my local output did not print "llvm::" but the
bot is.
Hopefully final bot fix for last few failures from
2af97be802.
Looks like sometimes the "llvm::" preceeding objects get printed in the
debug pass manager output and sometimes they don't. Replace with
wildcard matching.
Additional fixes for bot failures from 2af97be802.
Remove more exact matching on AnalyisManagers, as they can vary.
Also allow different orders between LoopAnalysis and
BranchProbabilityAnalysis as that can vary due to both being accessed in
the parameter list of a call.
Should fix most of the buildbot failures from
2af97be802, by loosening up the matching
on the AnalysisProxy output.
Added in --dump-input=fail on the one test that appears to be something
different, so I can hopefully debug it better.
Summary:
I've added some more extensive ThinLTO pipeline testing with the new PM,
motivated by the bug fixed in D72386.
I beefed up llvm/test/Other/new-pm-pgo.ll a little so that it tests
ThinLTO pre and post link with PGO, similar to the testing for the
default pipelines with PGO.
Added new pre and post link PGO tests for both instrumentation and
sample PGO that exhaustively test the pipelines at different
optimization levels via opt.
Added a clang test to exhaustively test the post link pipeline invoked for
distributed builds. I am currently only testing O2 and O3 since these
are the most important for performance.
It would be nice to add similar exhaustive testing for full LTO, and for
the old PM, but I don't have the bandwidth now and this is a start to
cover some of the situations that are not currently default and were
under tested.
Reviewers: wmi
Subscribers: mehdi_amini, inglorion, hiraditya, steven_wu, dexonsmith, jfb, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72538
These tests were added in 18627115f4 and e08b59f81d for validating a refactoring.
Removing because they break on ACL-controlled folders on Ubuntu, and their added value is low.
Differential Revision: https://reviews.llvm.org/D70854
down to pass builder in ltobackend.
Currently CodeGenOpts like UnrollLoops/VectorizeLoop/VectorizeSLP in clang
are not passed down to pass builder in ltobackend when new pass manager is
used. This is inconsistent with the behavior when new pass manager is used
and thinlto is not used. Such inconsistency causes slp vectorization pass
not being enabled in ltobackend for O3 + thinlto right now. This patch
fixes that.
Differential Revision: https://reviews.llvm.org/D72386
Don't overwrite existing target-cpu attributes.
I've often found the replacement behavior annoying, and this is
inconsistent with how the fast math command line flags interact with
the function attributes.
Does not yet change target-features, since I think that should behave
as a concatenation.
There's quite a lot of references to Polly in the LLVM CMake codebase. However
the registration pattern used by Polly could be useful to other external
projects: thanks to that mechanism it would be possible to develop LLVM
extension without touching the LLVM code base.
This patch has two effects:
1. Remove all code specific to Polly in the llvm/clang codebase, replaicing it
with a generic mechanism
2. Provide a generic mechanism to register compiler extensions.
A compiler extension is similar to a pass plugin, with the notable difference
that the compiler extension can be configured to be built dynamically (like
plugins) or statically (like regular passes).
As a result, people willing to add extra passes to clang/opt can do it using a
separate code repo, but still have their pass be linked in clang/opt as built-in
passes.
Differential Revision: https://reviews.llvm.org/D61446
This reverts commit 0be81968a2.
The VFDatabase needs some rework to be able to handle vectorization
and subsequent scalarization of intrinsics in out-of-tree versions of
the compiler. For more details, see the discussion in
https://reviews.llvm.org/D67572.
This patch introduced the VFDatabase, the framework proposed in
http://lists.llvm.org/pipermail/llvm-dev/2019-June/133484.html. [*]
In this patch the VFDatabase is used to bridge the TargetLibraryInfo
(TLI) calls that were previously used to query for the availability of
vector counterparts of scalar functions.
The VFISAKind field `ISA` of VFShape have been moved into into VFInfo,
under the assumption that different vector ISAs may provide the same
vector signature. At the moment, the vectorizer accepts any of the
available ISAs as long as the signature provided by the VFDatabase
matches the one expected in the vectorization process. For example,
when targeting AVX or AVX2, which both have 256-bit registers, the IR
signature of the two vector functions associated to the two ISAs is
the same. The `getVectorizedFunction` method at the moment returns the
first available match. We will need to add more heuristics to the
search system to decide which of the available version (TLI, AVX,
AVX2, ...) the system should prefer, when multiple versions with the
same VFShape are present.
Some of the code in this patch is based on the work done by Sumedh
Arani in https://reviews.llvm.org/D66025.
[*] Notice that in the proposal the VFDatabase was called SVFS. The
name VFDatabase is more in line with LLVM recommendations for
naming classes and variables.
Differential Revision: https://reviews.llvm.org/D67572
This reapplies: 8ff85ed905
Original commit message:
As a follow-up to my initial mail to llvm-dev here's a first pass at the O1 described there.
This change doesn't include any change to move from selection dag to fast isel
and that will come with other numbers that should help inform that decision.
There also haven't been any real debuggability studies with this pipeline yet,
this is just the initial start done so that people could see it and we could start
tweaking after.
Test updates: Outside of the newpm tests most of the updates are coming from either
optimization passes not run anymore (and without a compelling argument at the moment)
that were largely used for canonicalization in clang.
Original post:
http://lists.llvm.org/pipermail/llvm-dev/2019-April/131494.html
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65410
This reverts commit c9ddb02659.
This change doesn't include any change to move from selection dag to fast isel
and that will come with other numbers that should help inform that decision.
There also haven't been any real debuggability studies with this pipeline yet,
this is just the initial start done so that people could see it and we could start
tweaking after.
Test updates: Outside of the newpm tests most of the updates are coming from either
optimization passes not run anymore (and without a compelling argument at the moment)
that were largely used for canonicalization in clang.
Original post:
http://lists.llvm.org/pipermail/llvm-dev/2019-April/131494.html
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65410
If there is a small local array accessed in a loop, SROA can't handle memory
accesses with variant offset inside a loop, after the loop is fully unrolled,
all memory accesses to the array are with fixed offset, so now they can be
processed by SROA. But there is no more SROA passes after loop unroll. This
patch add an SROA pass after loop unroll to handle this pattern.
Differential Revision: https://reviews.llvm.org/D68593
If module pass uses on-demand function analyses then structure is being
displayed incorrectly because FunctionPassManagerImpl can't dump contained
FPPassManager instances.
Differential revision: https://reviews.llvm.org/D69315
Add a pass to lower is.constant and objectsize intrinsics
This pass lowers is.constant and objectsize intrinsics not simplified by
earlier constant folding, i.e. if the object given is not constant or if
not using the optimized pass chain. The result is recursively simplified
and constant conditionals are pruned, so that dead blocks are removed
even for -O0. This allows inline asm blocks with operand constraints to
work all the time.
The new pass replaces the existing lowering in the codegen-prepare pass
and fallbacks in SDAG/GlobalISEL and FastISel. The latter now assert
on the intrinsics.
Differential Revision: https://reviews.llvm.org/D65280
llvm-svn: 374784
This pass lowers is.constant and objectsize intrinsics not simplified by
earlier constant folding, i.e. if the object given is not constant or if
not using the optimized pass chain. The result is recursively simplified
and constant conditionals are pruned, so that dead blocks are removed
even for -O0. This allows inline asm blocks with operand constraints to
work all the time.
The new pass replaces the existing lowering in the codegen-prepare pass
and fallbacks in SDAG/GlobalISEL and FastISel. The latter now assert
on the intrinsics.
Differential Revision: https://reviews.llvm.org/D65280
llvm-svn: 374743
* Adds a TypeSize struct to represent the known minimum size of a type
along with a flag to indicate that the runtime size is a integer multiple
of that size
* Converts existing size query functions from Type.h and DataLayout.h to
return a TypeSize result
* Adds convenience methods (including a transparent conversion operator
to uint64_t) so that most existing code 'just works' as if the return
values were still scalars.
* Uses the new size queries along with ElementCount to ensure that all
supported instructions used with scalable vectors can be constructed
in IR.
Reviewers: hfinkel, lattner, rkruppe, greened, rovka, rengolin, sdesmalen
Reviewed By: rovka, sdesmalen
Differential Revision: https://reviews.llvm.org/D53137
llvm-svn: 374042
In the example from:
https://bugs.llvm.org/show_bug.cgi?id=38502
...we hit infinite looping/crashing because we have non-standard IR -
an instruction operand is used before defined.
This and other unusual constructs are allowed in unreachable blocks,
so avoid the problem by using DominatorTree to step around landmines.
Differential Revision: https://reviews.llvm.org/D67766
llvm-svn: 372339
Summary:
This is the first change to enable the TLI to be built per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
This change should not affect behavior, as the provided function is not
yet used to build a specifically per-function TLI, but rather enables
that migration.
Most of the changes were very mechanical, e.g. passing a Function to the
legacy analysis pass's getTLI interface, or in Module level cases,
adding a callback. This is similar to the way the per-function TTI
analysis works.
There was one place where we were looking for builtins but not in the
context of a specific function. See FindCXAAtExit in
lib/Transforms/IPO/GlobalOpt.cpp. I'm somewhat concerned my workaround
could provide the wrong behavior in some corner cases. Suggestions
welcome.
Reviewers: chandlerc, hfinkel
Subscribers: arsenm, dschuff, jvesely, nhaehnle, mehdi_amini, javed.absar, sbc100, jgravelle-google, eraman, aheejin, steven_wu, george.burgess.iv, dexonsmith, jfb, asbirlea, gchatelet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66428
llvm-svn: 371284
Summary: Previously module pass printer pass prints the banner even when the module doesn't include any function provided with `-filter-print-funcs` option. This introduced a lot of noise, especailly with ThinLTO. This diff addresses the issue and makes the banner printed only when the module includes functions in `-filter-print-funcs` list.
Reviewers: fedor.sergeev
Subscribers: mehdi_amini, hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66560
llvm-svn: 370849
Summary:
I'm not planning to check this in at the moment, but feedback is very welcome, in particular how this affects performance.
The feedback obtains here will guide the next steps towards enabling this.
This patch enables the use of MemorySSA in the loop pass manager.
Passes that currently use MemorySSA:
- EarlyCSE
Passes that use MemorySSA after this patch:
- EarlyCSE
- LICM
- SimpleLoopUnswitch
Loop passes that update MemorySSA (and do not use it yet, but could use it after this patch):
- LoopInstSimplify
- LoopSimplifyCFG
- LoopUnswitch
- LoopRotate
- LoopSimplify
- LCSSA
Loop passes that do *not* update MemorySSA:
- IndVarSimplify
- LoopDelete
- LoopIdiom
- LoopSink
- LoopUnroll
- LoopInterchange
- LoopUnrollAndJam
- LoopVectorize
- LoopReroll
- IRCE
Reviewers: chandlerc, george.burgess.iv, davide, sanjoy, gberry
Subscribers: jlebar, Prazek, dmgreen, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58311
llvm-svn: 370384
Summary:
When we print the IR with --print-after/before-*,
SlotIndexes will be printed whenever available (We haven't freed it).
This introduces some noises when we try to compare the IR
among different optimizations.
eg:
-print-before=machine-cp will print SlotIndexes for 1st machine-cp
pass, but NOT for 2nd machine-cp;
-print-after=machine-cp will NOT print SlotIndexes for both
machine-cp passes.
So SlotIndexes in 1st pass introduce noises when differing these IRs.
This patch introduces an option to hide indexes.
Reviewers: stoklund, thegameg, qcolombet
Reviewed By: thegameg
Subscribers: hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66500
llvm-svn: 369650
Summary:
Hoisting/sinking instruction out of a loop isn't always beneficial. Hoisting an instruction from a cold block inside a loop body out of the loop could hurt performance. This change makes Loop ICM profile aware - it now checks block frequency to make sure hoisting/sinking anly moves instruction to colder block.
Test Plan:
ninja check
Reviewers: asbirlea, sanjoy, reames, nikic, hfinkel, vsk
Reviewed By: asbirlea
Subscribers: fhahn, vsk, davidxl, xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65060
llvm-svn: 368526
Summary:
If the CallCounts change after an iteration of the DevirtSCCRepeatedPass, this is not reflected in the local CallCounts structure triggering the assertion checking the before/after sizes.
Since it is valid for the size to change and this only uses the CallCounts for the devirtualizing heuristic, keep a <Function*, CallCount> map instead, and make the devirtualizing decision using the counts for the functions that exist both before and after the pass.
Resolves PR42726.
Reviewers: chandlerc
Subscribers: mehdi_amini, jlebar, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65621
llvm-svn: 367703
Add PGO support at -O0 in the experimental new pass manager to sync the
behavior of the legacy pass manager.
Also change the test of gcc-flag-compatibility.c for more complete test:
(1) change the match string to "profc" and "profd" to ensure the
instrumentation is happening.
(2) add IR format proftext so that PGO use compilation is tested.
Differential Revision: https://reviews.llvm.org/D64029
llvm-svn: 367628
Summary:
In D62801, new function attribute `willreturn` was introduced. In short, a function with `willreturn` is guaranteed to come back to the call site(more precise definition is in LangRef).
In this patch, willreturn is annotated for LLVM intrinsics.
Reviewers: jdoerfert
Reviewed By: jdoerfert
Subscribers: jvesely, nhaehnle, sstefan1, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64904
llvm-svn: 367184
Reintroduces the scalable vector IR type from D32530, after it was reverted
a couple of times due to increasing chromium LTO build times. This latest
incarnation removes the walk over aggregate types from the verifier entirely,
in favor of rejecting scalable vectors in the isValidElementType methods in
ArrayType and StructType. This removes the 70% degradation observed with
the second repro tarball from PR42210.
Reviewers: thakis, hans, rengolin, sdesmalen
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D64079
llvm-svn: 365203
This allows later passes (in particular InstCombine) to optimize more
cases.
One that's important to us is `memcmp(p, q, constant) < 0` and memcmp(p, q, constant) > 0.
llvm-svn: 364412
This fixes CodeGen/available-externally-suppress.c when the new pass manager is
turned on by default. available_externally was not emitted during -O2 -flto
runs when it should still be retained for link time inlining purposes. This can
be fixed by checking that we aren't LTOPrelinking when adding the
EliminateAvailableExternallyPass.
Differential Revision: https://reviews.llvm.org/D63580
llvm-svn: 363971
NOTE: Note that no attributes are derived yet. This patch will not go in
alone but only with others that derive attributes. The framework is
split for review purposes.
This commit introduces the Attributor pass infrastructure and fixpoint
iteration framework. Further patches will introduce abstract attributes
into this framework.
In a nutshell, the Attributor will update instances of abstract
arguments until a fixpoint, or a "timeout", is reached. Communication
between the Attributor and the abstract attributes that are derived is
restricted to the AbstractState and AbstractAttribute interfaces.
Please see the file comment in Attributor.h for detailed information
including design decisions and typical use case. Also consider the class
documentation for Attributor, AbstractState, and AbstractAttribute.
Reviewers: chandlerc, homerdin, hfinkel, fedor.sergeev, sanjoy, spatel, nlopes, nicholas, reames
Subscribers: mehdi_amini, mgorny, hiraditya, bollu, steven_wu, dexonsmith, dang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59918
llvm-svn: 362578
Summary:
The refactoring in r360276 moved the `RunSLPVectorization` flag and added the default explicitly. The default should have been `false`, as before.
The new pass manager used to have SLPVectorization on by default, now it's off in opt, and needs D61617 checked in to enable it in clang.
Reviewers: chandlerc
Subscribers: mehdi_amini, jlebar, eraman, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61955
llvm-svn: 361537
Summary:
This is a redo of D60914.
The objective is to not invalidate AAManager, which is stateless, unless
there is an explicit invalidate in one of the AAResults.
To achieve this, this patch adds an API to PAC, to check precisely this:
is this analysis not invalidated explicitly == is this analysis not abandoned == is this analysis stateless, so preserved without explicitly being marked as preserved by everyone
Reviewers: chandlerc
Subscribers: mehdi_amini, jlebar, george.burgess.iv, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61284
llvm-svn: 359622
Currently, we do not expose BPI to loop passes at all. In the old pass manager, we appear to have been ignoring the fact that LCSSA and/or LoopSimplify didn't preserve BPI, and making it available to the following loop passes anyways. In the new one, it's invalidated before running any loop pass if either LCSSA or LoopSimplify actually make changes. If they don't make changes, then BPI is valid and available. So, we go ahead and teach LCSSA and LoopSimplify how to preserve BPI for consistency between old and new pass managers.
This patch avoids an invalidation between the two requires in the following trivial pass pipeline:
opt -passes="requires<branch-prob>,loop(no-op-loop),requires<branch-prob>"
(when the input file is one which requires either LCSSA or LoopSimplify to canonicalize the loops)
Differential Revision: https://reviews.llvm.org/D60790
llvm-svn: 358901
Summary:
Enable some of the existing size optimizations for cold code under PGO.
A ~5% code size saving in big internal app under PGO.
The way it gets BFI/PSI is discussed in the RFC thread
http://lists.llvm.org/pipermail/llvm-dev/2019-March/130894.html
Note it doesn't currently touch loop passes.
Reviewers: davidxl, eraman
Reviewed By: eraman
Subscribers: mgorny, javed.absar, smeenai, mehdi_amini, eraman, zzheng, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59514
llvm-svn: 358422
The issue here is that we actually allow CGSCC passes to mutate IR (and
therefore invalidate analyses) outside of the current SCC. At a minimum,
we need to support mutating parent and ancestor SCCs to support the
ArgumentPromotion pass which rewrites all calls to a function.
However, the analysis invalidation infrastructure is heavily based
around not needing to invalidate the same IR-unit at multiple levels.
With Loop passes for example, they don't invalidate other Loops. So we
need to customize how we handle CGSCC invalidation. Doing this without
gratuitously re-running analyses is even harder. I've avoided most of
these by using an out-of-band preserved set to accumulate the cross-SCC
invalidation, but it still isn't perfect in the case of re-visiting the
same SCC repeatedly *but* it coming off the worklist. Unclear how
important this use case really is, but I wanted to call it out.
Another wrinkle is that in order for this to successfully propagate to
function analyses, we have to make sure we have a proxy from the SCC to
the Function level. That requires pre-creating the necessary proxy.
The motivating test case now works cleanly and is added for
ArgumentPromotion.
Thanks for the review from Philip and Wei!
Differential Revision: https://reviews.llvm.org/D59869
llvm-svn: 357137
LTO provides additional opportunities for tailcall elimination due to
link-time inlining and visibility of nocapture attribute. Testing showed
negligible impact on compilation times.
Differential Revision: https://reviews.llvm.org/D58391
llvm-svn: 356511
TimePassesHandler object (implementation of time-passes for new pass manager)
gains ability to report into a stream customizable per-instance (per pipeline).
Intended use is to specify separate time-passes output stream per each compilation,
setting up TimePasses member of StandardInstrumentation during PassBuilder setup.
That allows to get independent non-overlapping pass-times reports for parallel
independent compilations (in JIT-like setups).
By default it still puts timing reports into the info-output-file stream
(created by CreateInfoOutputFile every time report is requested).
Unit-test added for non-default case, and it also allowed to discover that print() does not work
as declared - it did not reset the timers, leading to yet another report being printed into the default stream.
Fixed print() to actually reset timers according to what was declared in print's comments before.
Reviewed By: philip.pfaffe
Differential Revision: https://reviews.llvm.org/D59366
llvm-svn: 356305
Part 4 of CSPGO changes:
(1) add support in cmake for cspgo build.
(2) fix an issue in big endian.
(3) test cases.
Differential Revision: https://reviews.llvm.org/D54175
llvm-svn: 355541
With or without PGO data applied, splitting early in the pipeline
(either before the inliner or shortly after it) regresses performance
across SPEC variants. The cause appears to be that splitting hides
context for subsequent optimizations.
Schedule splitting late again, in effect reversing r352080, which
scheduled the splitting pass early for code size benefits (documented in
https://reviews.llvm.org/D57082).
Differential Revision: https://reviews.llvm.org/D58258
llvm-svn: 354158
Summary:
Follow up to D57082 which moved splitting earlier in the pipeline, in
order to perform it before inlining. However, it was moved too early,
before the IR is annotated with instrumented PGO data. This caused the
splitting to incorrectly determine cold functions.
Move it to just after PGO annotation (still before inlining), in both
pass managers.
Reviewers: vsk, hiraditya, sebpop
Subscribers: mehdi_amini, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57805
llvm-svn: 353270
Summary:
Follow on to D54819/r351476.
We also don't need to perform extra InstCombine pass when we aren't
loading the sample profile in the ThinLTO backend because we have a
flattened sample profile.
Additionally, for consistency and clarity, when we aren't reloading the
sample profile, perform ICP in the same location as non-sample PGO
backends. To this end I have moved the ICP invocation for non-SamplePGO
ThinLTO down into buildModuleSimplificationPipeline (partly addresses
the FIXME where we were previously setting this up).
Reviewers: wmi
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57705
llvm-svn: 353135
This is meant to be used with clang's __builtin_dynamic_object_size.
When 'true' is passed to this parameter, the intrinsic has the
potential to be folded into instructions that will be evaluated
at run time. When 'false', the objectsize intrinsic behaviour is
unchanged.
rdar://32212419
Differential revision: https://reviews.llvm.org/D56761
llvm-svn: 352664
See the bot error message reported in https://reviews.llvm.org/D57082.
Avoid trying to match full class names in -debug-pass-manager output,
because they aren't portable.
llvm-svn: 352138
Performing splitting early has several advantages:
- Inhibiting inlining of cold code early improves code size. Compared
to scheduling splitting at the end of the pipeline, this cuts code
size growth in half within the iOS shared cache (0.69% to 0.34%).
- Inhibiting inlining of cold code improves compile time. There's no
need to inline split cold functions, or to inline as much *within*
those split functions as they are marked `minsize`.
- During LTO, extra work is only done in the pre-link step. Less code
must be inlined during cross-module inlining.
An additional motivation here is that the most common cold regions
identified by the static/conservative splitting heuristic can (a) be
found before inlining and (b) do not grow after inlining. E.g.
__assert_fail, os_log_error.
The disadvantages are:
- Some opportunities for splitting out cold code may be missed. This
gap can potentially be narrowed by adding a worklist algorithm to the
splitting pass.
- Some opportunities to reduce code size may be lost (e.g. store
sinking, when one side of the CFG diamond is split). This does not
outweigh the code size benefits of splitting earlier.
On net, splitting early in the pipeline has substantial code size
benefits, and no major effects on memory locality or performance. We
measured memory locality using ktrace data, and consistently found that
10% fewer pages were needed to capture 95% of text page faults in key
iOS benchmarks. We measured performance on frequency-stabilized iOS
devices using LNT+externals.
This reverses course on the decision made to schedule splitting late in
r344869 (D53437).
Differential Revision: https://reviews.llvm.org/D57082
llvm-svn: 352080
Currently we have pgo options defined in PassManagerBuilder.cpp only for
instrument pgo, but not for sample pgo. We also have pgo options defined
in NewPMDriver.cpp in opt only for new pass manager and for all kinds of
pgo. They have some inconsistency.
To make the options more consistent and make tests writing easier, the
patch let old pass manager to share the same pgo options with new pass
manager in opt, and removes the options in PassManagerBuilder.cpp.
Differential Revision: https://reviews.llvm.org/D56749
llvm-svn: 351392
Make sure all print statements are compatible with Python 2 and Python3 using
the `from __future__ import print_function` statement.
Differential Revision: https://reviews.llvm.org/D56249
llvm-svn: 350307
-print-after IR printing generally can not print the IR unit (Loop or SCC)
which has just been invalidated by the pass. However, when working in -print-module-scope
mode even if Loop was invalidated there is still a valid module that we can print.
Since we can not access invalidated IR unit from AfterPassInvalidated instrumentation
point we can remember the module to be printed *before* pass. This change introduces
BeforePass instrumentation that stores all the information required for module printing
into the stack and then after pass (in AfterPassInvalidated) just print whatever
has been placed on stack.
Reviewed By: philip.pfaffe
Differential Revision: https://reviews.llvm.org/D55278
llvm-svn: 349896
When multiple loop transformation are defined in a loop's metadata, their order of execution is defined by the order of their respective passes in the pass pipeline. For instance, e.g.
#pragma clang loop unroll_and_jam(enable)
#pragma clang loop distribute(enable)
is the same as
#pragma clang loop distribute(enable)
#pragma clang loop unroll_and_jam(enable)
and will try to loop-distribute before Unroll-And-Jam because the LoopDistribute pass is scheduled after UnrollAndJam pass. UnrollAndJamPass only supports one inner loop, i.e. it will necessarily fail after loop distribution. It is not possible to specify another execution order. Also,t the order of passes in the pipeline is subject to change between versions of LLVM, optimization options and which pass manager is used.
This patch adds 'followup' attributes to various loop transformation passes. These attributes define which attributes the resulting loop of a transformation should have. For instance,
!0 = !{!0, !1, !2}
!1 = !{!"llvm.loop.unroll_and_jam.enable"}
!2 = !{!"llvm.loop.unroll_and_jam.followup_inner", !3}
!3 = !{!"llvm.loop.distribute.enable"}
defines a loop ID (!0) to be unrolled-and-jammed (!1) and then the attribute !3 to be added to the jammed inner loop, which contains the instruction to distribute the inner loop.
Currently, in both pass managers, pass execution is in a fixed order and UnrollAndJamPass will not execute again after LoopDistribute. We hope to fix this in the future by allowing pass managers to run passes until a fixpoint is reached, use Polly to perform these transformations, or add a loop transformation pass which takes the order issue into account.
For mandatory/forced transformations (e.g. by having been declared by #pragma omp simd), the user must be notified when a transformation could not be performed. It is not possible that the responsible pass emits such a warning because the transformation might be 'hidden' in a followup attribute when it is executed, or it is not present in the pipeline at all. For this reason, this patche introduces a WarnMissedTransformations pass, to warn about orphaned transformations.
Since this changes the user-visible diagnostic message when a transformation is applied, two test cases in the clang repository need to be updated.
To ensure that no other transformation is executed before the intended one, the attribute `llvm.loop.disable_nonforced` can be added which should disable transformation heuristics before the intended transformation is applied. E.g. it would be surprising if a loop is distributed before a #pragma unroll_and_jam is applied.
With more supported code transformations (loop fusion, interchange, stripmining, offloading, etc.), transformations can be used as building blocks for more complex transformations (e.g. stripmining+stripmining+interchange -> tiling).
Reviewed By: hfinkel, dmgreen
Differential Revision: https://reviews.llvm.org/D49281
Differential Revision: https://reviews.llvm.org/D55288
llvm-svn: 348944
IR-printing AfterPass instrumentation might be called on a loop
that has just been invalidated. We should skip printing it to
avoid spurious asserts.
Reviewed By: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D54740
llvm-svn: 348887
It appears that print-module-scope was not implemented for legacy SCC passes.
Fixed to print a whole module instead of just current SCC.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D54793
llvm-svn: 348144
Before this commit, `llc -print-after-all` would print something like:
*** IR Dump After Pre-ISel Intrinsic Lowering ***; ModuleID = ...
Emit a newline such that ModuleID appears on a line by its own.
llvm-svn: 346844
Summary:
It turns out that we need an OptimizerLast PassBuilder extension point
after all. I missed the relevance of this EP the first time. By legacy PM magic,
function passes added at this EP get added to the last _Function_ PM, which is a
feature we lost when dropping this EP for the new PM.
A key difference between this and the legacy PassManager's OptimizerLast
callback is that this extension point is not triggered at O0. Extensions
to the O0 pipeline should append their passes to the end of the overall
pipeline.
Differential Revision: https://reviews.llvm.org/D54374
llvm-svn: 346645
We can stop recording conditions once we reached the immediate dominator
for the block containing the call site. Conditions in predecessors of the
that node will be the same for all paths to the call site and splitting
is not beneficial.
This patch makes CallSiteSplitting dependent on the DT anlysis. because
the immediate dominators seem to be the easiest way of finding the node
to stop at.
I had to update some exiting tests, because they were checking for
conditions that were true/false on all paths to the call site. Those
should now be handled by instcombine/ipsccp.
Reviewers: davide, junbuml
Reviewed By: junbuml
Differential Revision: https://reviews.llvm.org/D44627
llvm-svn: 346483
Summary:
Fix the new PM to only perform hot cold splitting once during ThinLTO,
by skipping it in the pre-link phase.
This was already fixed in the old PM by the move of the hot cold split
pass later (after the early return when PrepareForThinLTO) by r344869.
Reviewers: vsk, sebpop, hiraditya
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D53611
llvm-svn: 345096
Summary:
This patch will print out {Counter, Skip, StopAfter} info of all passes which have DebugCounter set at destruction.
It can be used to monitor how many times does certain transformation happen in a pass, and also help check if -debug-counter option is set correctly.
Please refer to this [[ http://lists.llvm.org/pipermail/llvm-dev/2018-July/124722.html | thread ]] for motivation.
Reviewers: george.burgess.iv, davide, greened
Reviewed By: greened
Subscribers: kristina, llozano, mgorny, llvm-commits, mgrang
Differential Revision: https://reviews.llvm.org/D50031
llvm-svn: 345085
Summary:
In the new+old pass manager, hot cold splitting was schedule too early.
Thanks to Vedant for pointing this out.
Reviewers: sebpop, vsk
Reviewed By: sebpop, vsk
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D53437
llvm-svn: 344869
All the PassBuilder::parse interfaces now return descriptive StringError
instead of a plain bool. It allows to make -passes/aa-pipeline parsing
errors context-specific and thus less confusing.
TODO: ideally we should also make suggestions for misspelled pass names,
but that requires some extensions to PassBuilder.
Reviewed By: philip.pfaffe, chandlerc
Differential Revision: https://reviews.llvm.org/D53246
llvm-svn: 344685
Summary:
All the PassBuilder::parse interfaces now return descriptive StringError
instead of a plain bool. It allows to make -passes/aa-pipeline parsing
errors context-specific and thus less confusing.
TODO: ideally we should also make suggestions for misspelled pass names,
but that requires some extensions to PassBuilder.
Reviewed By: philip.pfaffe, chandlerc
Differential Revision: https://reviews.llvm.org/D53246
llvm-svn: 344519
Removing deficiency of initial implementation of -print-before-all/-after-all
- it was effectively skipping IR printing for all the SCC passes.
Now LazyCallGraph:SCC gets its IR printed.
Reviewed By: skatkov
Differential Revision: https://reviews.llvm.org/D53270
llvm-svn: 344505
If you have the string /usr/bin, prior to this patch it would not
be quoted by our YAML serializer. But a string like C:\src would
be, due to the presence of a backslash. This makes the quoting
rules of basically every single file path different depending on
the path syntax (posix vs. Windows).
While technically not required by the YAML specification to quote
forward slashes, when the behavior of paths is inconsistent it
makes it difficult to portably write FileCheck lines that will
work with either kind of path.
Differential Revision: https://reviews.llvm.org/D53169
llvm-svn: 344359
This reverts commit b86c16ad8c97dadc1f529da72a5bb74e9eaed344.
This is being reverted because I forgot to write a useful
commit message, so I'm going to resubmit it with an actual
commit message.
llvm-svn: 344358
prefix.
Use this to direct these files to a specific location in the test suite
so that we don't write files out to random directories (or fail if the
working directory isn't writable).
llvm-svn: 344014
CFGPrinter (-view-cfg, -dot-cfg) invokes an undefined behaviour (dangling
pointer to rvalue) on IR files with branch weights. This patch fixes the
problem caused by Twine initialization and string conversion split into
two statements.
This change fixes the bug 37019. A similar patch to this problem was
provided in the llvmlite project
Patch by mcopik (Marcin Copik).
Differential Revision: https://reviews.llvm.org/D52933
llvm-svn: 343984
Enable time-passes functionality through PassInstrumentation callbacks
for passes and analyses.
TimePassesHandler class keeps all the callbacks, the timing data as it
is being collected as well as the stack of currently active timers.
Parts of the fix that might be somewhat unobvious:
- mapping of passes into Timer (TimingData) can not be done per-instance.
PassID name provided into the callback is common for all the pass invocations.
Thus the only way to get a timing with reasonable granularity is to collect
timing data per pass invocation, getting a new timer for each BeforePass.
Hence the key for TimingData uses a pair of <StringRef/unsigned count> to
uniquely identify a pass invocation.
- consequently, this new-pass-manager implementation performs no aggregation
of timing data, reporting timings for each pass invocation separately.
In that it differs from legacy-pass-manager time-passes implementation that
reports timing data aggregated per pass instance.
- pass managers and adaptors are not tracked, similar to how pass managers are
not tracked in legacy time-passes.
- TimerStack tracks timers that are active, each BeforePass pushes the new timer
on stack, each AfterPass pops active timer from stack and stops it.
Reviewers: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D51276
llvm-svn: 343898
This reverts commit r342387 as it's showing significant performance
regressions in a number of benchmarks. Followed up with the
committer and original thread with an example and will get performance
numbers before recommitting.
llvm-svn: 343522
When printing successor probabilities for a MBB, a human readable value is sometimes shown as 200.0%.
The human readable output is based on getProbabilityIterator, which returns 0xFFFFFFFF for getNumerator() and 0x80000000 for getDenominator() for unknown BranchProbability.
By using getSuccProbability as we do for the non-human readable part, we can avoid this problem.
Differential Revision: https://reviews.llvm.org/D52605
llvm-svn: 343297
Implementing -print-before-all/-print-after-all/-filter-print-func support
through PassInstrumentation callbacks.
- PrintIR routines implement printing callbacks.
- StandardInstrumentations class provides a central place to manage all
the "standard" in-tree pass instrumentations. Currently it registers
PrintIR callbacks.
Reviewers: chandlerc, paquette, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D50923
llvm-svn: 342896
As a prerequisite to time-passes implementation which needs to time both passes
and analyses, adding instrumentation points to the Analysis Manager.
The are two functional differences between Pass and Analysis instrumentation:
- the latter does not increment pass execution counter
- it does not provide ability to skip execution of the corresponding analysis
Reviewers: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D51275
llvm-svn: 342778
Pass Execution Instrumentation interface enables customizable instrumentation
of pass execution, as per "RFC: Pass Execution Instrumentation interface"
posted 06/07/2018 on llvm-dev@
The intent is to provide a common machinery to implement all
the pass-execution-debugging features like print-before/after,
opt-bisect, time-passes etc.
Here we get a basic implementation consisting of:
* PassInstrumentationCallbacks class that handles registration of callbacks
and access to them.
* PassInstrumentation class that handles instrumentation-point interfaces
that call into PassInstrumentationCallbacks.
* Callbacks accept StringRef which is just a name of the Pass right now.
There were some ideas to pass an opaque wrapper for the pointer to pass instance,
however it appears that pointer does not actually identify the instance
(adaptors and managers might have the same address with the pass they govern).
Hence it was decided to go simple for now and then later decide on what the proper
mental model of identifying a "pass in a phase of pipeline" is.
* Callbacks accept llvm::Any serving as a wrapper for const IRUnit*, to remove direct dependencies
on different IRUnits (e.g. Analyses).
* PassInstrumentationAnalysis analysis is explicitly requested from PassManager through
usual AnalysisManager::getResult. All pass managers were updated to run that
to get PassInstrumentation object for instrumentation calls.
* Using tuples/index_sequence getAnalysisResult helper to extract generic AnalysisManager's extra
args out of a generic PassManager's extra args. This is the only way I was able to explicitly
run getResult for PassInstrumentationAnalysis out of a generic code like PassManager::run or
RepeatedPass::run.
TODO: Upon lengthy discussions we agreed to accept this as an initial implementation
and then get rid of getAnalysisResult by improving RepeatedPass implementation.
* PassBuilder takes PassInstrumentationCallbacks object to pass it further into
PassInstrumentationAnalysis. Callbacks registration should be performed directly
through PassInstrumentationCallbacks.
* new-pm tests updated to account for PassInstrumentationAnalysis being run
* Added PassInstrumentation tests to PassBuilderCallbacks unit tests.
Other unit tests updated with registration of the now-required PassInstrumentationAnalysis.
Made getName helper to return std::string (instead of StringRef initially) to fix
asan builtbot failures on CGSCC tests.
Reviewers: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D47858
llvm-svn: 342664
Pass Execution Instrumentation interface enables customizable instrumentation
of pass execution, as per "RFC: Pass Execution Instrumentation interface"
posted 06/07/2018 on llvm-dev@
The intent is to provide a common machinery to implement all
the pass-execution-debugging features like print-before/after,
opt-bisect, time-passes etc.
Here we get a basic implementation consisting of:
* PassInstrumentationCallbacks class that handles registration of callbacks
and access to them.
* PassInstrumentation class that handles instrumentation-point interfaces
that call into PassInstrumentationCallbacks.
* Callbacks accept StringRef which is just a name of the Pass right now.
There were some ideas to pass an opaque wrapper for the pointer to pass instance,
however it appears that pointer does not actually identify the instance
(adaptors and managers might have the same address with the pass they govern).
Hence it was decided to go simple for now and then later decide on what the proper
mental model of identifying a "pass in a phase of pipeline" is.
* Callbacks accept llvm::Any serving as a wrapper for const IRUnit*, to remove direct dependencies
on different IRUnits (e.g. Analyses).
* PassInstrumentationAnalysis analysis is explicitly requested from PassManager through
usual AnalysisManager::getResult. All pass managers were updated to run that
to get PassInstrumentation object for instrumentation calls.
* Using tuples/index_sequence getAnalysisResult helper to extract generic AnalysisManager's extra
args out of a generic PassManager's extra args. This is the only way I was able to explicitly
run getResult for PassInstrumentationAnalysis out of a generic code like PassManager::run or
RepeatedPass::run.
TODO: Upon lengthy discussions we agreed to accept this as an initial implementation
and then get rid of getAnalysisResult by improving RepeatedPass implementation.
* PassBuilder takes PassInstrumentationCallbacks object to pass it further into
PassInstrumentationAnalysis. Callbacks registration should be performed directly
through PassInstrumentationCallbacks.
* new-pm tests updated to account for PassInstrumentationAnalysis being run
* Added PassInstrumentation tests to PassBuilderCallbacks unit tests.
Other unit tests updated with registration of the now-required PassInstrumentationAnalysis.
Reviewers: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D47858
llvm-svn: 342597
Summary:
Pass Execution Instrumentation interface enables customizable instrumentation
of pass execution, as per "RFC: Pass Execution Instrumentation interface"
posted 06/07/2018 on llvm-dev@
The intent is to provide a common machinery to implement all
the pass-execution-debugging features like print-before/after,
opt-bisect, time-passes etc.
Here we get a basic implementation consisting of:
* PassInstrumentationCallbacks class that handles registration of callbacks
and access to them.
* PassInstrumentation class that handles instrumentation-point interfaces
that call into PassInstrumentationCallbacks.
* Callbacks accept StringRef which is just a name of the Pass right now.
There were some ideas to pass an opaque wrapper for the pointer to pass instance,
however it appears that pointer does not actually identify the instance
(adaptors and managers might have the same address with the pass they govern).
Hence it was decided to go simple for now and then later decide on what the proper
mental model of identifying a "pass in a phase of pipeline" is.
* Callbacks accept llvm::Any serving as a wrapper for const IRUnit*, to remove direct dependencies
on different IRUnits (e.g. Analyses).
* PassInstrumentationAnalysis analysis is explicitly requested from PassManager through
usual AnalysisManager::getResult. All pass managers were updated to run that
to get PassInstrumentation object for instrumentation calls.
* Using tuples/index_sequence getAnalysisResult helper to extract generic AnalysisManager's extra
args out of a generic PassManager's extra args. This is the only way I was able to explicitly
run getResult for PassInstrumentationAnalysis out of a generic code like PassManager::run or
RepeatedPass::run.
TODO: Upon lengthy discussions we agreed to accept this as an initial implementation
and then get rid of getAnalysisResult by improving RepeatedPass implementation.
* PassBuilder takes PassInstrumentationCallbacks object to pass it further into
PassInstrumentationAnalysis. Callbacks registration should be performed directly
through PassInstrumentationCallbacks.
* new-pm tests updated to account for PassInstrumentationAnalysis being run
* Added PassInstrumentation tests to PassBuilderCallbacks unit tests.
Other unit tests updated with registration of the now-required PassInstrumentationAnalysis.
Reviewers: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D47858
llvm-svn: 342544
Rebase rL341954 since https://bugs.llvm.org/show_bug.cgi?id=38912
has been fixed by rL342055.
Precommit testing performed:
* Overnight runs of csmith comparing the output between programs
compiled with gvn-hoist enabled/disabled.
* Bootstrap builds of clang with UbSan/ASan configurations.
llvm-svn: 342387
This test constructs a non-readable file of mode 0111, which lingers in the test output directory and will cause EACCES to various tools (rg, rsync, ...)
llvm-svn: 342279
This adds DebugCounter support to the PartiallyInlineLibCalls pass,
which should make debugging/automated bisection easier in the future.
Patch by Zhizhou Yang!
Differential Revision: https://reviews.llvm.org/D50093
llvm-svn: 342172
This reverts rL341954.
The builder `sanitizer-x86_64-linux-bootstrap-ubsan` has been
failing with timeouts at stage2 clang/ubsan:
[3065/3073] Linking CXX executable bin/lld
command timed out: 1200 seconds without output running python
../sanitizer_buildbot/sanitizers/buildbot_selector.py,
attempting to kill
llvm-svn: 342001
This patch does the following things:
1. update SymbolicallyEvaluateGEP so that it bails out if it cannot preserve inrange arribute;
2. update llvm/test/Analysis/ConstantFolding/gep.ll to remove UB in it;
3. remove inaccurate comment above ConstantFoldInstOperandsImpl in llvm/lib/Analysis/ConstantFolding.cpp;
4. add a new regression test that makes sure that no optimizations change an inrange GEP in an unexpected way.
Patch by Zhaomo Yang!
Differential Revision: https://reviews.llvm.org/D51698
llvm-svn: 341888
Just was made aware that this is necessary for tests outside of
the X86 subdirectory. Add a REQUIRES line to make sure bots that
don't enable x86 are happy.
llvm-svn: 341885
This adds per-function size remarks to codegen, similar to what we have in the
IR layer as of r341588. This only impacts MachineFunctionPasses.
This does the same thing, but for `MachineInstr`s instead of just
`Instructions`. After this, when a `MachineFunctionPass` modifies the number of
`MachineInstr`s in the function it ran on, you'll get a remark.
To enable this, use the size-info analysis remark as before.
llvm-svn: 341876
This patch adds per-function size information remarks. Previously, passing
-Rpass-analysis=size-info would only give you per-module changes. By adding
the ability to do this per-function, it's easier to see which functions
contributed the most to size changes.
https://reviews.llvm.org/D51467
llvm-svn: 341588
Summary:
Refactoring done by rL340872 accidentally appeared to be non-NFC, changing the way how
multiple instances of the same pass are handled - aggregation of results by PassName
forced data for multiple instances to be merged together and reported as one line.
Getting back to creating/reporting timers per pass instance.
Reporting was a bit enhanced by counting pass instances and adding #<num> suffix
to the pass description. Note that it is instances that are being counted,
not invocations of them.
time-passes test updated to account for multiple passes being run.
Reviewers: paquette, jhenderson, MatzeB, skatkov
Reviewed By: skatkov
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51535
llvm-svn: 341346
ModuleCount = InstrCount was incorrect. It should have been
InstrCount = ModuleCount. This was making it emit an extra, incorrect remark
for Print Module IR.
The test didn't catch this, because it didn't ensure that the only remark
output was from the desired pass. So, it was possible to have an extra remark
come through and not fail. Updated the test so that we ensure that the last
remark that's output comes from the desired pass. This is done by ensuring
that whatever is being read after the last remark is YAML output rather than
some incorrect garbage.
llvm-svn: 341267
Rebase rL338240 since the excessive memory usage observed when using
GVNHoist with UBSan has been fixed by rL340818.
Differential Revision: https://reviews.llvm.org/D49858
llvm-svn: 340922
Moving PassTimingInfo from legacy pass manager code into a separate header.
Making it suitable for both legacy and new pass manager.
Adding a test on -time-passes main functionality.
llvm-svn: 340872
This version of the patch fixes cleaning up ssa_copy intrinsics, so it does not
crash for instructions in blocks that have been marked unreachable.
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
Differential Revision: https://reviews.llvm.org/D45330
llvm-svn: 340525
Changes the default Windows target triple returned by
GetHostTriple.cmake from the old environment names (which we wanted to
move away from) to newer, normalized ones. This also requires updating
all tests to use the new systems names in constraints.
Differential Revision: https://reviews.llvm.org/D47381
llvm-svn: 339307
This fixes an inconsistency in code generation when compiling with or
without debug information (-g). When debug information is available in
an empty block, the original test would fail, resulting in possibly
different code.
Patch by: Jeroen Dobbelaere
Differential revision: https://reviews.llvm.org/D49467
llvm-svn: 339129
Summary:
The issue with the python path is that the path to python on Windows can contain spaces. To make the tests always work, the path to python needs to be surrounded by quotes.
This change updates several configuration files which specify the path to python as a substitution and also remove quotes from existing tests.
Reviewers: asmith, zturner, alexshap, jakehehrlich
Reviewed By: zturner, alexshap, jakehehrlich
Subscribers: mehdi_amini, nemanjai, eraman, kbarton, jakehehrlich, steven_wu, dexonsmith, stella.stamenova, delcypher, llvm-commits
Differential Revision: https://reviews.llvm.org/D50206
llvm-svn: 339073
(Previously reverted in r338442)
I'm told that the breakage came from us using an x86 triple on configs
that didn't have x86 enabled. This is remedied by moving the
debugcounter test to an x86 directory (where there's also a
opt-bisect-isel.ll test for similar reasons).
I can't repro the reverse-iteration failure mentioned in the revert with
this patch, so I assume that a misconfiguration on my end is what caused
that.
Original commit message:
Add DebugCounters to DivRemPairs
For people who don't use DebugCounters, NFCI.
Patch by Zhizhou Yang!
Differential Revision: https://reviews.llvm.org/D50033
llvm-svn: 338653
This is being done in order to make GVN able to better optimize certain inputs.
MemDep doesn't use PhiValues directly, but does need to notifiy it when things
get invalidated.
Differential Revision: https://reviews.llvm.org/D48489
llvm-svn: 338384
The combination of r338240 and r338242 causes the opt pass pipeline tests to
fail because of how r338242 makes BasicAA be invalidated more often. Adjust the
tests to reflect this.
llvm-svn: 338250
By using PhiValuesAnalysis we can get all the values reachable from a phi, so
we can be more precise instead of giving up when a phi has phi operands. We
can't make BaseicAA directly use PhiValuesAnalysis though, as the user of
BasicAA may modify the function in ways that PhiValuesAnalysis can't cope with.
For this optional usage to work correctly BasicAAWrapperPass now needs to be not
marked as CFG-only (i.e. it is now invalidated even when CFG is preserved) due
to how the legacy pass manager handles dependent passes being invalidated,
namely the depending pass still has a pointer to the now-dead dependent pass.
Differential Revision: https://reviews.llvm.org/D44564
llvm-svn: 338242
r337828 resolves a PredicateInfo issue with unnamed types.
Original message:
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
llvm-svn: 337904
This is a workaround and it would be better to fix this generally, but
doing it generally is quite tricky. See D48541 and PR38117.
Doing it in PredicateInfo directly allows us to use the type address to
differentiate different unnamed types, because neither the created
declarations nor the ssa_copy calls should be visible after
PredicateInfo got destroyed.
Reviewers: efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D49126
llvm-svn: 337828
Summary:
Enable these passes for CFI and WPD in ThinLTO and LTO with the new pass
manager. Add a couple of tests for both PMs based on the clang tests
tools/clang/test/CodeGen/thinlto-distributed-cfi*.ll, but just test
through llvm-lto2 and not with distributed ThinLTO.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D49429
llvm-svn: 337461
This changes `-print-*` from transformation passes to analysis passes so
that `-print-after-all` and `-print-before-all` don't trigger. This
avoids some redundant output.
Patch by Son Tuan Vu!
llvm-svn: 336869
Summary:
PGOMemOPSize only modifies CFG in a couple of places; thus we can preserve the DominatorTree with little effort.
When optimizing SQLite with -O3, this patch can decrease 3.8% of the numbers of nodes traversed by DFS and 5.7% of the times DominatorTreeBase::recalculation is called.
Reviewers: kuhar, davide, dmgreen
Reviewed By: dmgreen
Subscribers: mzolotukhin, vsk, llvm-commits
Differential Revision: https://reviews.llvm.org/D48914
llvm-svn: 336522
Summary:
This patch introduce new intrinsic -
strip.invariant.group that was described in the
RFC: Devirtualization v2
Reviewers: rsmith, hfinkel, nlopes, sanjoy, amharc, kuhar
Subscribers: arsenm, nhaehnle, JDevlieghere, hiraditya, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D47103
Co-authored-by: Krzysztof Pszeniczny <krzysztof.pszeniczny@gmail.com>
llvm-svn: 336073
and diretory.
Also cleans up all the associated naming to be consistent and removes
the public access to the pass ID which was unused in LLVM.
Also runs clang-format over parts that changed, which generally cleans
up a bunch of formatting.
This is in preparation for doing some internal cleanups to the pass.
Differential Revision: https://reviews.llvm.org/D47352
llvm-svn: 336028
Extends the CFGPrinter and CallPrinter with heat colors based on heuristics or
profiling information. The colors are enabled by default and can be toggled
on/off for CFGPrinter by using the option -cfg-heat-colors for both
-dot-cfg[-only] and -view-cfg[-only]. Similarly, the colors can be toggled
on/off for CallPrinter by using the option -callgraph-heat-colors for both
-dot-callgraph and -view-callgraph.
Patch by Rodrigo Caetano Rocha!
Differential Revision: https://reviews.llvm.org/D40425
llvm-svn: 335996
SCCP does not change the CFG, so we can mark it as preserved.
Reviewers: dberlin, efriedma, davide
Reviewed By: davide
Differential Revision: https://reviews.llvm.org/D47149
llvm-svn: 335820
=== Generating the CG Profile ===
The CGProfile module pass simply gets the block profile count for each BB and scans for call instructions. For each call instruction it adds an edge from the current function to the called function with the current BB block profile count as the weight.
After scanning all the functions, it generates an appending module flag containing the data. The format looks like:
```
!llvm.module.flags = !{!0}
!0 = !{i32 5, !"CG Profile", !1}
!1 = !{!2, !3, !4} ; List of edges
!2 = !{void ()* @a, void ()* @b, i64 32} ; Edge from a to b with a weight of 32
!3 = !{void (i1)* @freq, void ()* @a, i64 11}
!4 = !{void (i1)* @freq, void ()* @b, i64 20}
```
Differential Revision: https://reviews.llvm.org/D48105
llvm-svn: 335794
This is the first pass in the main pipeline to use the legacy PM's
ability to run function analyses "on demand". Unfortunately, it turns
out there are bugs in that somewhat-hacky approach. At the very least,
it leaks memory and doesn't support -debug-pass=Structure. Unclear if
there are larger issues or not, but this should get the sanitizer bots
back to green by fixing the memory leaks.
llvm-svn: 335320
This wasn't obvious for the author to fix because this is the first
pipeline use of the magic utility to get function analyses within
a module pass in the lagecy pass manager. Turns out that has a bug which
prevents dumping the structure of the pipeline and shows up as an
unnamed pass.
I've just left a FIXME for that as it doesn't seem likely worth fixing
and certainly shouldn't hold up getting the bots green.
llvm-svn: 335314
This reverts commit r335206.
As discussed here: https://reviews.llvm.org/rL333740, a fix will come
tomorrow. In the meanwhile, revert this to fix some bots.
llvm-svn: 335272
r335150 should resolve the issues with the clang-with-thin-lto-ubuntu
and clang-with-lto-ubuntu builders.
Original message:
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
llvm-svn: 335206
Summary:
We only modify CFG in a couple of places, and we can preserve DT there
with a little effort.
Reviewers: davide, vsk
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D48059
llvm-svn: 334895
When using clang --save-stats -mllvm -time-passes, both timers and stats
end up in the same json file.
We could end up with things like:
{
"asm-printer.EmittedInsts": 1,
"time.pass.Virtual Register Map.wall": 2.9015541076660156e-04,
"time.pass.Virtual Register Map.user": 2.0500000000000379e-04,
"time.pass.Virtual Register Map.sys": 8.5000000000001741e-05,
}
This patch makes use of the pass argument name (if available) in the
JSON key to end up with things like:
{
"asm-printer.EmittedInsts": 1,
"time.pass.virtregmap.wall": 2.9015541076660156e-04,
"time.pass.virtregmap.user": 2.0500000000000379e-04,
"time.pass.virtregmap.sys": 8.5000000000001741e-05,
}
This also helps avoiding to write another JSON printer to handle all the
cases that we could have in our pass names.
Fixed test instead of adding a new one originally from r334649.
Differential Revision: https://reviews.llvm.org/D48109
llvm-svn: 334657
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
Differential Revision: https://reviews.llvm.org/D45330
llvm-svn: 333740
loop-cleanup passes at the beginning of the loop pass pipeline, and
re-enqueue loops after even trivial unswitching.
This will allow us to much more consistently avoid simplifying code
while doing trivial unswitching. I've also added a test case that
specifically shows effective iteration using this technique.
I've unconditionally updated the new PM as that is always using the
SimpleLoopUnswitch pass, and I've made the pipeline changes for the old
PM conditional on using this new unswitch pass. I added a bunch of
comments to the loop pass pipeline in the old PM to make it more clear
what is going on when reviewing.
Hopefully this will unblock doing *partial* unswitching instead of just
full unswitching.
Differential Revision: https://reviews.llvm.org/D47408
llvm-svn: 333493
Reverting this to see if this is causing the failures of the
clang-with-thin-lto-ubuntu bot.
[IPSCCP] Use PredicateInfo to propagate facts from cmp instructions.
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
Differential Revision: https://reviews.llvm.org/D45330
llvm-svn: 333323
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
Differential Revision: https://reviews.llvm.org/D45330
llvm-svn: 333268
This patch adds a remark which tells the user when a pass changes the number of
IR instructions in a module.
It can be enabled by using -Rpass-analysis=size-info.
The point of this is to make it easier to collect statistics on how passes
modify programs in terms of code size. This is similar in concept to timing
reports, but using a remark-based interface makes it easy to diff changes over
multiple compilations of the same program.
By adding functionality like this, we can see
* Which passes impact code size the most
* How passes impact code size at different optimization levels
* Which pass might have contributed the most to an overall code size
regression
The patch lives in the legacy pass manager, but since it's simply emitting
remarks, it shouldn't be too difficult to adapt the functionality to the new
pass manager as well. This can also be adapted to handle MachineInstr counts in
code gen passes.
https://reviews.llvm.org/D38768
llvm-svn: 332739
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
Summary: Makes this consistent with the old PM.
Reviewers: eraman
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D46526
llvm-svn: 331709
It turned out that readonly argmemonly is not enough.
store 42, %p
%b = barrier(%p)
store 43, %b
the first store is dead, but because barrier was marked as
reading argument memory, it was considered alive. With
inaccessiblememonly it doesn't read the argument, but
it also can't be CSEd.
based on: https://reviews.llvm.org/D32006
llvm-svn: 331338
phi is on lhs of a comparison op.
For the following testcase,
L1:
%t0 = add i32 %m, 7
%t3 = icmp eq i32* %t2, null
br i1 %t3, label %L3, label %L2
L2:
%t4 = load i32, i32* %t2, align 4
br label %L3
L3:
%t5 = phi i32 [ %t0, %L1 ], [ %t4, %L2 ]
%t6 = icmp eq i32 %t0, %t5
br i1 %t6, label %L4, label %L5
We know if we go through the path L1 --> L3, %t6 should always be true. However
currently, if the rhs of the eq comparison is phi, JumpThreading fails to
evaluate %t6 to true. And we know that Instcombine cannot guarantee always
canonicalizing phi to the left hand side of the comparison operation according
to the operand priority comparison mechanism in instcombine. The patch handles
the case when rhs of the comparison op is a phi.
Differential Revision: https://reviews.llvm.org/D46275
llvm-svn: 331266
Summary:
Follow-up to D43690, the EliminateAvailableExternally pass currently
runs under -O0 and -O2 and up. Under -O1 we would still want to drop
available_externally symbols to reduce space without inlining having
run.
Reviewers: tejohnson
Reviewed By: tejohnson
Subscribers: mehdi_amini, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D46093
llvm-svn: 330961
- In Python 2.x, basestring is the base string type, but in
Python 3.x basestring is not defined and instead str includes
unicode strings.
- When Python is in a path that includes spaces, it needs to
be specified with quotes in the test files for it to run.
- The cache.ll test relies on files of a specific size being
created by Python, but on some versions of Windows the
files that are created by the current code are one byte
larger than expected. To fix the test, update file creation
to always make files of the expected size.
Patch by Stella Stamenova!
llvm-svn: 329466
Summary:
This was motivated by absence of PrunEH functionality in new PM.
It was decided that a proper way to do PruneEH is to add NoUnwind inference
into PostOrderFunctionAttrs and then perform normal SimplifyCFG on top.
This change generalizes attribute handling implemented for (a removal of)
Convergent attribute, by introducing a generic builder-like class
AttributeInferer
It registers all the attribute inference requests, storing per-attribute
predicates into a vector, and then goes through an SCC Node, scanning all
the instructions for not breaking attribute assumptions.
The main idea is that as soon all the instructions from all the functions
of SCC Node conform to attribute assumptions then we are free to infer
the attribute as set for all the functions of SCC Node.
It handles two distinct cases of attributes:
- those that might break due to derefinement of the function code
for these attributes we are allowed to apply inference only if all the
functions are "exact definitions". Example - NoUnwind.
- those that do not care about derefinement
for these attributes we are allowed to apply inference as soon as we see
any function definition. Example - removal of Convergent attribute.
Also in this commit:
* Converted all the FunctionAttrs tests to use FileCheck and added new-PM
invocations to them
* FunctionAttrs/convergent.ll test demonstrates a difference in behavior between
new and old PM implementations. Marked with FIXME.
* PruneEH tests were converted to new-PM as well, using function-attrs+simplify-cfg
combo as intended
* some of "other" tests were updated since function-attrs now infers 'nounwind'
even for old PM pipeline
* -disable-nounwind-inference hidden option added as a possible workaround for a supposedly
rare case when nounwind being inferred by default presents a problem
Reviewers: chandlerc, jlebar
Reviewed By: jlebar
Subscribers: eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D44415
llvm-svn: 328377
For basic blocks with instructions between the beginning of the block
and a call we have to duplicate the instructions before the call in all
split blocks and add PHI nodes for uses of the duplicated instructions
after the call.
Currently, the threshold for the number of instructions before a call
is quite low, to keep the impact on binary size low.
Reviewers: junbuml, mcrosier, davidxl, davide
Reviewed By: junbuml
Differential Revision: https://reviews.llvm.org/D41860
llvm-svn: 325126
One test uses diff, the other tries to change the PATH which doesn't
seem to work well ('not' is no longer accessible/found after the PATH is
changed - I think $PATH isn't expanded when setting PATH).
llvm-svn: 324787
candidates with coldcc attribute.
This recommits r322721 reverted due to sanitizer memory leak build bot failures.
Original commit message:
This patch adds support for the coldcc calling convention for Power.
This changes the set of non-volatile registers. It includes a pass to stress
test the implementation by marking all static directly called functions with
the coldcc attribute through the option -enable-coldcc-stress-test. It also
includes an option, -ppc-enable-coldcc, to add the coldcc attribute to
functions which are cold at all call sites based on BlockFrequencyInfo when
the containing function does not call any non cold functions.
Differential Revision: https://reviews.llvm.org/D38413
llvm-svn: 323778
Florian Hahn