Summary: Also add support for some older Myriad CPUs that were missing.
Reviewers: jyknight
Subscribers: fedor.sergeev
Differential Revision: https://reviews.llvm.org/D37552
llvm-svn: 314705
Issues addressed since original review:
- Moved removal of dead instructions found by
LiveIntervals::shrinkToUses() outside of loop iterating over
instructions to avoid instructions being deleted while pointed to by
iterator.
- Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
- The pass no longer forwards COPYs to physical register uses, since
doing so can break code that implicitly relies on the physical
register number of the use.
- The pass no longer forwards COPYs to undef uses, since doing so
can break the machine verifier by creating LiveRanges that don't
end on a use (since the undef operand is not considered a use).
[MachineCopyPropagation] Extend pass to do COPY source forwarding
This change extends MachineCopyPropagation to do COPY source forwarding.
This change also extends the MachineCopyPropagation pass to be able to
be run during register allocation, after physical registers have been
assigned, but before the virtual registers have been re-written, which
allows it to remove virtual register COPY LiveIntervals that become dead
through the forwarding of all of their uses.
llvm-svn: 312328
It caused PR34387: Assertion failed: (RegNo < NumRegs && "Attempting to access record for invalid register number!")
> Issues identified by buildbots addressed since original review:
> - Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
> - The pass no longer forwards COPYs to physical register uses, since
> doing so can break code that implicitly relies on the physical
> register number of the use.
> - The pass no longer forwards COPYs to undef uses, since doing so
> can break the machine verifier by creating LiveRanges that don't
> end on a use (since the undef operand is not considered a use).
>
> [MachineCopyPropagation] Extend pass to do COPY source forwarding
>
> This change extends MachineCopyPropagation to do COPY source forwarding.
>
> This change also extends the MachineCopyPropagation pass to be able to
> be run during register allocation, after physical registers have been
> assigned, but before the virtual registers have been re-written, which
> allows it to remove virtual register COPY LiveIntervals that become dead
> through the forwarding of all of their uses.
llvm-svn: 312178
Issues identified by buildbots addressed since original review:
- Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
- The pass no longer forwards COPYs to physical register uses, since
doing so can break code that implicitly relies on the physical
register number of the use.
- The pass no longer forwards COPYs to undef uses, since doing so
can break the machine verifier by creating LiveRanges that don't
end on a use (since the undef operand is not considered a use).
[MachineCopyPropagation] Extend pass to do COPY source forwarding
This change extends MachineCopyPropagation to do COPY source forwarding.
This change also extends the MachineCopyPropagation pass to be able to
be run during register allocation, after physical registers have been
assigned, but before the virtual registers have been re-written, which
allows it to remove virtual register COPY LiveIntervals that become dead
through the forwarding of all of their uses.
llvm-svn: 312154
Two issues identified by buildbots were addressed:
- The pass no longer forwards COPYs to physical register uses, since
doing so can break code that implicitly relies on the physical
register number of the use.
- The pass no longer forwards COPYs to undef uses, since doing so
can break the machine verifier by creating LiveRanges that don't
end on a use (since the undef operand is not considered a use).
[MachineCopyPropagation] Extend pass to do COPY source forwarding
This change extends MachineCopyPropagation to do COPY source forwarding.
This change also extends the MachineCopyPropagation pass to be able to
be run during register allocation, after physical registers have been
assigned, but before the virtual registers have been re-written, which
allows it to remove virtual register COPY LiveIntervals that become dead
through the forwarding of all of their uses.
Reviewers: qcolombet, javed.absar, MatzeB, jonpa
Subscribers: jyknight, nemanjai, llvm-commits, nhaehnle, mcrosier, mgorny
Differential Revision: https://reviews.llvm.org/D30751
llvm-svn: 311135
This reverts commit r311038.
Several buildbots are breaking, and at least one appears to be due to
the forwarding of physical regs enabled by this change. Reverting while
I investigate further.
llvm-svn: 311062
This change extends MachineCopyPropagation to do COPY source forwarding.
This change also extends the MachineCopyPropagation pass to be able to
be run during register allocation, after physical registers have been
assigned, but before the virtual registers have been re-written, which
allows it to remove virtual register COPY LiveIntervals that become dead
through the forwarding of all of their uses.
Reviewers: qcolombet, javed.absar, MatzeB, jonpa
Subscribers: jyknight, nemanjai, llvm-commits, nhaehnle, mcrosier, mgorny
Differential Revision: https://reviews.llvm.org/D30751
llvm-svn: 311038
Summary:
Also enable no-fsmuld for sparcv7 (which doesn't have the
instruction).
The previous code which used a post-processing pass to do this was
unnecessary; disabling the instruction is entirely sufficient.
Reviewers: jacob_hansen, ekedaigle
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35576
llvm-svn: 308661
Added a feature to the Sparc back-end that replaces the integer multiply and
divide instructions with calls to .mul/.sdiv/.udiv. This is a step towards
having full v7 support.
Patch by: Eric Kedaigle
Differential Revision: https://reviews.llvm.org/D35500
llvm-svn: 308343
This also reverts follow-ups r303292 and r303298.
It broke some Chromium tests under MSan, and apparently also internal
tests at Google.
llvm-svn: 303369
Summary: Moving LiveRangeShrink to x86 as this pass is mostly useful for archtectures with great register pressure.
Reviewers: MatzeB, qcolombet
Reviewed By: qcolombet
Subscribers: jholewinski, jyknight, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33294
llvm-svn: 303292
Summary:
In SelectionDAG, when a store is immediately chained to another store
to the same address, elide the first store as it has no observable
effects. This is causes small improvements dealing with intrinsics
lowered to stores.
Test notes:
* Many testcases overwrite store addresses multiple times and needed
minor changes, mainly making stores volatile to prevent the
optimization from optimizing the test away.
* Many X86 test cases optimized out instructions associated with
associated with va_start.
* Note that test_splat in CodeGen/AArch64/misched-stp.ll no longer has
dependencies to check and can probably be removed and potentially
replaced with another test.
Reviewers: rnk, john.brawn
Subscribers: aemerson, rengolin, qcolombet, jyknight, nemanjai, nhaehnle, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33206
llvm-svn: 303198
Summary: LiveRangeShrink pass moves instruction right after the definition with the same BB if the instruction and its operands all have more than one use. This pass is inexpensive and guarantees optimal live-range within BB.
Reviewers: davidxl, wmi, hfinkel, MatzeB, andreadb
Reviewed By: MatzeB, andreadb
Subscribers: hiraditya, jyknight, sanjoy, skatkov, gberry, jholewinski, qcolombet, javed.absar, krytarowski, atrick, spatel, RKSimon, andreadb, MatzeB, mehdi_amini, mgorny, efriedma, davide, dberlin, llvm-commits
Differential Revision: https://reviews.llvm.org/D32563
llvm-svn: 302938
When functions are terminated by unreachable instructions, the last
instruction might trigger a CFI instruction to be generated. However,
emitting it would be be illegal since the function (and thus the FDE
the CFI is in) has already ended with the previous instruction.
Darwin's dwarfdump --verify --eh-frame complains about this and the
specification supports this.
Relevant bits from the DWARF 5 standard (6.4 Call Frame Information):
"[The] address_range [field in an FDE]: The number of bytes of
program instructions described by this entry."
"Row creation instructions: [...]
The new location value is always greater than the current one."
The first quotation implies that a CFI cannot describe a target
address outside of the enclosing FDE's range.
rdar://problem/26244988
Differential Revision: https://reviews.llvm.org/D32246
llvm-svn: 301219
Summary: By using reg_nodbg_empty() to determine if a function can be
treated as a leaf function or not, we miss the case when the register
pair L0_L1 is used but not L0 by itself. This has the effect that
use_all_i32_regs(), a test in reserved-regs.ll which tries to use all
registers, gets treated as a leaf function.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: davide, RKSimon, sepavloff, llvm-commits
Differential Revision: https://reviews.llvm.org/D27089
llvm-svn: 297285
Lay out trellis-shaped CFGs optimally.
A trellis of the shape below:
A B
|\ /|
| \ / |
| X |
| / \ |
|/ \|
C D
would be laid out A; B->C ; D by the current layout algorithm. Now we identify
trellises and lay them out either A->C; B->D or A->D; B->C. This scales with an
increasing number of predecessors. A trellis is a a group of 2 or more
predecessor blocks that all have the same successors.
because of this we can tail duplicate to extend existing trellises.
As an example consider the following CFG:
B D F H
/ \ / \ / \ / \
A---C---E---G---Ret
Where A,C,E,G are all small (Currently 2 instructions).
The CFG preserving layout is then A,B,C,D,E,F,G,H,Ret.
The current code will copy C into B, E into D and G into F and yield the layout
A,C,B(C),E,D(E),F(G),G,H,ret
define void @straight_test(i32 %tag) {
entry:
br label %test1
test1: ; A
%tagbit1 = and i32 %tag, 1
%tagbit1eq0 = icmp eq i32 %tagbit1, 0
br i1 %tagbit1eq0, label %test2, label %optional1
optional1: ; B
call void @a()
br label %test2
test2: ; C
%tagbit2 = and i32 %tag, 2
%tagbit2eq0 = icmp eq i32 %tagbit2, 0
br i1 %tagbit2eq0, label %test3, label %optional2
optional2: ; D
call void @b()
br label %test3
test3: ; E
%tagbit3 = and i32 %tag, 4
%tagbit3eq0 = icmp eq i32 %tagbit3, 0
br i1 %tagbit3eq0, label %test4, label %optional3
optional3: ; F
call void @c()
br label %test4
test4: ; G
%tagbit4 = and i32 %tag, 8
%tagbit4eq0 = icmp eq i32 %tagbit4, 0
br i1 %tagbit4eq0, label %exit, label %optional4
optional4: ; H
call void @d()
br label %exit
exit:
ret void
}
here is the layout after D27742:
straight_test: # @straight_test
; ... Prologue elided
; BB#0: # %entry ; A (merged with test1)
; ... More prologue elided
mr 30, 3
andi. 3, 30, 1
bc 12, 1, .LBB0_2
; BB#1: # %test2 ; C
rlwinm. 3, 30, 0, 30, 30
beq 0, .LBB0_3
b .LBB0_4
.LBB0_2: # %optional1 ; B (copy of C)
bl a
nop
rlwinm. 3, 30, 0, 30, 30
bne 0, .LBB0_4
.LBB0_3: # %test3 ; E
rlwinm. 3, 30, 0, 29, 29
beq 0, .LBB0_5
b .LBB0_6
.LBB0_4: # %optional2 ; D (copy of E)
bl b
nop
rlwinm. 3, 30, 0, 29, 29
bne 0, .LBB0_6
.LBB0_5: # %test4 ; G
rlwinm. 3, 30, 0, 28, 28
beq 0, .LBB0_8
b .LBB0_7
.LBB0_6: # %optional3 ; F (copy of G)
bl c
nop
rlwinm. 3, 30, 0, 28, 28
beq 0, .LBB0_8
.LBB0_7: # %optional4 ; H
bl d
nop
.LBB0_8: # %exit ; Ret
ld 30, 96(1) # 8-byte Folded Reload
addi 1, 1, 112
ld 0, 16(1)
mtlr 0
blr
The tail-duplication has produced some benefit, but it has also produced a
trellis which is not laid out optimally. With this patch, we improve the layouts
of such trellises, and decrease the cost calculation for tail-duplication
accordingly.
This patch produces the layout A,C,E,G,B,D,F,H,Ret. This layout does have
back edges, which is a negative, but it has a bigger compensating
positive, which is that it handles the case where there are long strings
of skipped blocks much better than the original layout. Both layouts
handle runs of executed blocks equally well. Branch prediction also
improves if there is any correlation between subsequent optional blocks.
Here is the resulting concrete layout:
straight_test: # @straight_test
; BB#0: # %entry ; A (merged with test1)
mr 30, 3
andi. 3, 30, 1
bc 12, 1, .LBB0_4
; BB#1: # %test2 ; C
rlwinm. 3, 30, 0, 30, 30
bne 0, .LBB0_5
.LBB0_2: # %test3 ; E
rlwinm. 3, 30, 0, 29, 29
bne 0, .LBB0_6
.LBB0_3: # %test4 ; G
rlwinm. 3, 30, 0, 28, 28
bne 0, .LBB0_7
b .LBB0_8
.LBB0_4: # %optional1 ; B (Copy of C)
bl a
nop
rlwinm. 3, 30, 0, 30, 30
beq 0, .LBB0_2
.LBB0_5: # %optional2 ; D (Copy of E)
bl b
nop
rlwinm. 3, 30, 0, 29, 29
beq 0, .LBB0_3
.LBB0_6: # %optional3 ; F (Copy of G)
bl c
nop
rlwinm. 3, 30, 0, 28, 28
beq 0, .LBB0_8
.LBB0_7: # %optional4 ; H
bl d
nop
.LBB0_8: # %exit
Differential Revision: https://reviews.llvm.org/D28522
llvm-svn: 295223
Summary:
llc would hit a fatal error for errors in inline assembly. The
diagnostics message is now printed.
Reviewers: rengolin, MatzeB, javed.absar, anemet
Reviewed By: anemet
Subscribers: jyknight, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D29408
llvm-svn: 293999
When choosing the best successor for a block, ordinarily we would have preferred
a block that preserves the CFG unless there is a strong probability the other
direction. For small blocks that can be duplicated we now skip that requirement
as well, subject to some simple frequency calculations.
Differential Revision: https://reviews.llvm.org/D28583
llvm-svn: 293716
reserved physreg in RegisterCoalescer.
Previously, we only checked for clobbers when merging into a READ of
the physreg, but not when merging from a WRITE to the physreg.
Differential Revision: https://reviews.llvm.org/D28527
llvm-svn: 291942
This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded.
This needs a simple probability check because there are some cases where it is
not profitable.
llvm-svn: 291695
When choosing the best successor for a block, ordinarily we would have preferred
a block that preserves the CFG unless there is a strong probability the other
direction. For small blocks that can be duplicated we now skip that requirement
as well.
Differential revision: https://reviews.llvm.org/D27742
llvm-svn: 291609
addSchedBarrierDeps() is supposed to add use operands to the ExitSU
node. The current implementation adds uses for calls/barrier instruction
and the MBB live-outs in all other cases. The use
operands of conditional jump instructions were missed.
Also added code to macrofusion to set the latencies between nodes to
zero to avoid problems with the fusing nodes lingering around in the
pending list now.
Differential Revision: https://reviews.llvm.org/D25140
llvm-svn: 286544
Note: Test is per differential review, but the other changed code in the review was for an optimisation that din't quite work. Nevertheless, the test is valid for the unoptimised version of the fix.
Differential Review: https://reviews.llvm.org/D24658
llvm-svn: 285692
On SparcV8, it was previously the case that a variable-sized alloca
might overlap by 4-bytes the last fixed stack variable, effectively
because 92 (the number of bytes reserved for the register spill area) !=
96 (the offset added to SP for where to start a DYNAMIC_STACKALLOC).
It's not as simple as changing 96 to 92, because variables that should
be 8-byte aligned would then be misaligned.
For now, simply increase the allocation size by 8 bytes for each dynamic
allocation -- wastes space, but at least doesn't overlap. As the large
comment says, doing this more efficiently will require larger changes in
llvm.
Also adds some test cases showing that we continue to not support
dynamic stack allocation and over-alignment in the same function.
llvm-svn: 285131
Summary: Both computeKnownBits and ComputeNumSignBits can now do a simple
look-through of EXTRACT_VECTOR_ELT. It will compute the result based
on the known bits (or known sign bits) for the vector that the element
is extracted from.
Reviewers: bogner, tstellarAMD, mkuper
Subscribers: wdng, RKSimon, jyknight, llvm-commits, nhaehnle
Differential Revision: https://reviews.llvm.org/D25007
llvm-svn: 283347
...and the two followup commits:
Revert "[Sparc][Leon] Missed resetting option flags from check-in 278489."
Revert "[Sparc][Leon] Errata fixes for various errata in different
versions of the Leon variants of the Sparc 32 bit processor."
This reverts commit r274856, r278489, and r278492.
llvm-svn: 278511
The nature of the errata are listed in the comments preceding the errata fix passes. Relevant unit tests are implemented for each of these.
These changes update older versions of these errata fixes with improvements to code and unit tests.
Differential Revision: https://reviews.llvm.org/D21960
llvm-svn: 278489
An identity COPY like this:
%AL = COPY %AL, %EAX<imp-def>
has no semantic effect, but encodes liveness information: Further users
of %EAX only depend on this instruction even though it does not define
the full register.
Replace the COPY with a KILL instruction in those cases to maintain this
liveness information. (This reverts a small part of r238588 but this
time adds a comment explaining why a KILL instruction is useful).
llvm-svn: 274952
Errata fixes for various errata in different versions of the Leon variants of the Sparc 32 bit processor.
The nature of the errata are listed in the comments preceding the errata fix passes. Relevant unit tests are implemented for each of these.
Note: Running clang-format has changed a few other lines too, unrelated to the implemented errata fixes. These have been left in as this keeps the code formatting consistent.
Differential Revision: http://reviews.llvm.org/D21960
llvm-svn: 274856
Tail merge was making the assumption that a layout successor or
predecessor was always a cfg successor/predecessor. Remove that
assumption. Changes to tests are necessary because the errant cfg edges
were preventing optimizations.
llvm-svn: 273700
Passes to fix three hardware errata that appear on some LEON processor variants.
The instructions FSMULD, FMULS and FDIVS do not work as expected on some LEON processors. This change allows those instructions to be substituted for alternatives instruction sequences that are known to work.
These passes only run when selected individually, or as part of a processor defintion. They are not included in general SPARC processor compilations for non-LEON processors or for those LEON processors that do not have these hardware errata.
llvm-svn: 273108
Many CPUs only have the ability to do a 4-byte cmpxchg (or ll/sc), not 1
or 2-byte. For those, you need to mask and shift the 1 or 2 byte values
appropriately to use the 4-byte instruction.
This change adds support for cmpxchg-based instruction sets (only SPARC,
in LLVM). The support can be extended for LL/SC-based PPC and MIPS in
the future, supplanting the ISel expansions those architectures
currently use.
Tests added for the IR transform and SPARCv9.
Differential Revision: http://reviews.llvm.org/D21029
llvm-svn: 273025
They were accidentally using the 32-bit load/store instruction for
8/16-bit operations, due to incorrect patterns
(8/16-bit cmpxchg and atomicrmw will be fixed in subsequent changes)
llvm-svn: 270486
Due to an erratum in some versions of LEON, we must insert a NOP after any LD or LDF instruction to ensure the processor has time to load the value correctly before using it. This pass will implement that erratum fix.
The code will have no effect for other Sparc, but non-LEON processors.
Differential Review: http://reviews.llvm.org/D20353
llvm-svn: 270417
This change adds support for software floating point operations for Sparc targets.
This is the first in a set of patches to enable software floating point on Sparc. The next patch will enable the option to be used with Clang.
Differential Revision: http://reviews.llvm.org/D19265
llvm-svn: 269892
Added test to check LeonItineraries are being applied by code checked-in two weeks ago in r267121.
Phabricator Review: http://reviews.llvm.org/D19359
llvm-svn: 269032
Modification of previously existing code (variable rename only), with unit test added.
Differential Revision: http://reviews.llvm.org/D19368
llvm-svn: 268493
This code implements builtin_setjmp and builtin_longjmp exception handling intrinsics for 32-bit Sparc back-ends.
The code started as a mash-up of the PowerPC and X86 versions, although there are sufficient differences to both that had to be made for Sparc handling.
Note: I have manual tests running. I'll work on a unit test and add that to the rest of this diff in the next day.
Also, this implementation is only for 32-bit Sparc. I haven't focussed on a 64-bit version, although I have left the code in a prepared state for implementing this, including detecting pointer size and comments indicating where I suspect there may be differences.
Differential Revision: http://reviews.llvm.org/D19798
llvm-svn: 268483
The SparcV8 fneg and fabs instructions interestingly come only in a
single-float variant. Since the sign bit is always the topmost bit no
matter what size float it is, you simply operate on the high
subregister, as if it were a single float.
However, the layout of double-floats in the float registers is reversed
on little-endian CPUs, so that the high bits are in the second
subregister, rather than the first.
Thus, this expansion must check the endianness to use the correct
subregister.
llvm-svn: 267489
AnalyzeBranch on X86 (and, previously, SPARC, which implementation was
copied from X86) tries to modify the branches based on block
layout (e.g. checking isLayoutSuccessor), when AllowModify is true.
The rest of the architectures leave that up to the caller, which can
call InsertBranch, RemoveBranch, and ReverseBranchCondition as
appropriate. That appears to be the preferred way to do it nowadays.
This commit makes SPARC like the rest: replaces AnalyzeBranch with an
implementation cribbed from AArch64, and adds a ReverseBranchCondition
implementation.
Additionally, a test-case has been added (also cribbed from AArch64)
demonstrating that redundant branch sequences no longer get emitted.
E.g., it used to emit code like this:
bne .LBB1_2
nop
ba .LBB1_1
nop
.LBB1_2:
And now emits:
cmp %i0, 42
be .LBB1_1
nop
llvm-svn: 257572
On SparcV8, doubles get passed in two 32-bit integer registers. The call
code was already handling endianness correctly, but the incoming
argument code was not -- it got the two halves in opposite order.
Also remove some dead code in LowerFormalArguments_32 to handle
less-than-32bit values, which can't actually happen.
Finally, add some test cases for the 32-bit calling convention, cribbed
from the 64abi.ll test, and run for both big and little-endian.
llvm-svn: 255668
This occurred due to introducing the invalid i64 type after type
legalization had already finished, in an attempt to workaround bitcast
f64 -> v2i32 not doing constant folding.
The *right* thing is to actually fix bitcast, but that has other
complications. So, for now, just get rid of the broken workaround, and
check in a test-case showing that it doesn't crash, with TODOs for
emitting proper code.
llvm-svn: 249908
The (mostly-deprecated) SelectionDAG-based ILPListDAGScheduler scheduler
was making poor scheduling decisions, causing high register pressure and
extraneous register spills.
Switching to the newer machine scheduler generates better code -- even
without there being a machine model defined for SPARC yet.
(Actually committing the test changes too, this time, unlike r247315)
llvm-svn: 247343
If you're going to realign %sp to get object alignment properly (which
the code does), and stack offsets and alignments are calculated going
down from %fp (which they are), then the total stack size had better
be a multiple of the alignment. LLVM did indeed ensure that.
And then, after aligning, the sparc frame code added 96 (for sparcv8)
to the frame size, making any requested alignment of 64-bytes or
higher *guaranteed* to be misaligned. The test case added with r245668
even tests this exact scenario, and asserted the incorrect behavior,
which I somehow failed to notice. D'oh.
This change fixes the frame lowering code to align the stack size
*after* adding the spill area, instead.
Differential Revision: http://reviews.llvm.org/D12349
llvm-svn: 246042
Note: I do not implement a base pointer, so it's still impossible to
have dynamic realignment AND dynamic alloca in the same function.
This also moves the code for determining the frame index reference
into getFrameIndexReference, where it belongs, instead of inline in
eliminateFrameIndex.
[Begin long-winded screed]
Now, stack realignment for Sparc is actually a silly thing to support,
because the Sparc ABI has no need for it -- unlike the situation on
x86, the stack is ALWAYS aligned to the required alignment for the CPU
instructions: 8 bytes on sparcv8, and 16 bytes on sparcv9.
However, LLVM unfortunately implements user-specified overalignment
using stack realignment support, so for now, I'm going to go along
with that tradition. GCC instead treats objects which have alignment
specification greater than the maximum CPU-required alignment for the
target as a separate block of stack memory, with their own virtual
base pointer (which gets aligned). Doing it that way avoids needing to
implement per-target support for stack realignment, except for the
targets which *actually* have an ABI-specified stack alignment which
is too small for the CPU's requirements.
Further unfortunately in LLVM, the default canRealignStack for all
targets effectively returns true, despite that implementing that is
something a target needs to do specifically. So, the previous behavior
on Sparc was to silently ignore the user's specified stack
alignment. Ugh.
Yet MORE unfortunate, if a target actually does return false from
canRealignStack, that also causes the user-specified alignment to be
*silently ignored*, rather than emitting an error.
(I started looking into fixing that last, but it broke a bunch of
tests, because LLVM actually *depends* on having it silently ignored:
some architectures (e.g. non-linux i386) have smaller stack alignment
than spilled-register alignment. But, the fact that a register needs
spilling is not known until within the register allocator. And by that
point, the decision to not reserve the frame pointer has been frozen
in place. And without a frame pointer, stack realignment is not
possible. So, canRealignStack() returns false, and
needsStackRealignment() then returns false, assuming everyone can just
go on their merry way assuming the alignment requirements were
probably just suggestions after-all. Sigh...)
Differential Revision: http://reviews.llvm.org/D12208
llvm-svn: 245668
The LDD/STD instructions can load/store a 64bit quantity from/to
memory to/from a consecutive even/odd pair of (32-bit) registers. They
are part of SparcV8, and also present in SparcV9. (Although deprecated
there, as you can store 64bits in one register).
As recommended on llvmdev in the thread "How to enable use of 64bit
load/store for 32bit architecture" from Apr 2015, I've modeled the
64-bit load/store operations as working on a v2i32 type, rather than
making i64 a legal type, but with few legal operations. The latter
does not (currently) work, as there is much code in llvm which assumes
that if i64 is legal, operations like "add" will actually work on it.
The same assumption does not hold for v2i32 -- for vector types, it is
workable to support only load/store, and expand everything else.
This patch:
- Adds a new register class, IntPair, for even/odd pairs of registers.
- Modifies the list of reserved registers, the stack spilling code,
and register copying code to support the IntPair register class.
- Adds support in AsmParser. (note that in asm text, you write the
name of the first register of the pair only. So the parser has to
morph the single register into the equivalent paired register).
- Adds the new instructions themselves (LDD/STD/LDDA/STDA).
- Hooks up the instructions and registers as a vector type v2i32. Adds
custom legalizer to transform i64 load/stores into v2i32 load/stores
and bitcasts, so that the new instructions can actually be
generated, and marks all operations other than load/store on v2i32
as needing to be expanded.
- Copies the unfortunate SelectInlineAsm hack from ARMISelDAGToDAG.
This hack undoes the transformation of i64 operands into two
arbitrarily-allocated separate i32 registers in
SelectionDAGBuilder. and instead passes them in a single
IntPair. (Arbitrarily allocated registers are not useful, asm code
expects to be receiving a pair, which can be passed to ldd/std.)
Also adds a bunch of test cases covering all the bugs I've added along
the way.
Differential Revision: http://reviews.llvm.org/D8713
llvm-svn: 244484
- Implement copying ASR to/from GPR regs.
- Mark ASRs as non-allocatable, so it won't try to arbitrarily use
them inappropriately.
- Instead of inserting explicit WRASR/RDASR nodes in the MUL/DIV
routines, just do normal register copies.
- Also...mark div as using Y, not just writing it.
Added a test case with some code which previously died with an
assertion failure (with -O0), or produced wrong code (otherwise).
(Third time's the charm?)
Differential Revision: http://reviews.llvm.org/D10401
llvm-svn: 241686
This causes errors like:
ld: error: blah.o: requires dynamic R_X86_64_PC32 reloc against '' which
may overflow at runtime; recompile with -fPIC
blah.cc:function f(): error: undefined reference to ''
blah.o:g(): error: undefined reference to ''
I have not yet come up with an appropriate reproduction.
llvm-svn: 240394
Now that pr23900 is fixed, we can bring it back with no changes.
Original message:
Make all temporary symbols unnamed.
What this does is make all symbols that would otherwise start with a .L
(or L on MachO) unnamed.
Some of these symbols still show up in the symbol table, but we can just
make them unnamed.
In order to make sure we produce identical results when going thought assembly,
all .L (not just the compiler produced ones), are now unnamed.
Running llc on llvm-as.opt.bc, the peak memory usage goes from 208.24MB to
205.57MB.
llvm-svn: 240302
What this does is make all symbols that would otherwise start with a .L
(or L on MachO) unnamed.
Some of these symbols still show up in the symbol table, but we can just
make them unnamed.
In order to make sure we produce identical results when going thought assembly,
all .L (not just the compiler produced ones), are now unnamed.
Running llc on llvm-as.opt.bc, the peak memory usage goes from 208.24MB to
205.57MB.
llvm-svn: 240130
They had been getting emitted as a section + offset reference, which
is bogus since the value needs to be the offset within the GOT, not
the actual address of the symbol's object.
Differential Revision: http://reviews.llvm.org/D10441
llvm-svn: 240020
The personality routine currently lives in the LandingPadInst.
This isn't desirable because:
- All LandingPadInsts in the same function must have the same
personality routine. This means that each LandingPadInst beyond the
first has an operand which produces no additional information.
- There is ongoing work to introduce EH IR constructs other than
LandingPadInst. Moving the personality routine off of any one
particular Instruction and onto the parent function seems a lot better
than have N different places a personality function can sneak onto an
exceptional function.
Differential Revision: http://reviews.llvm.org/D10429
llvm-svn: 239940
(Note that register "Y" is essentially just ASR0).
Also added some test cases for divide and multiply, which had none before.
Differential Revision: http://reviews.llvm.org/D8670
llvm-svn: 237580
See r230786 and r230794 for similar changes to gep and load
respectively.
Call is a bit different because it often doesn't have a single explicit
type - usually the type is deduced from the arguments, and just the
return type is explicit. In those cases there's no need to change the
IR.
When that's not the case, the IR usually contains the pointer type of
the first operand - but since typed pointers are going away, that
representation is insufficient so I'm just stripping the "pointerness"
of the explicit type away.
This does make the IR a bit weird - it /sort of/ reads like the type of
the first operand: "call void () %x(" but %x is actually of type "void
()*" and will eventually be just of type "ptr". But this seems not too
bad and I don't think it would benefit from repeating the type
("void (), void () * %x(" and then eventually "void (), ptr %x(") as has
been done with gep and load.
This also has a side benefit: since the explicit type is no longer a
pointer, there's no ambiguity between an explicit type and a function
that returns a function pointer. Previously this case needed an explicit
type (eg: a function returning a void() function was written as
"call void () () * @x(" rather than "call void () * @x(" because of the
ambiguity between a function returning a pointer to a void() function
and a function returning void).
No ambiguity means even function pointer return types can just be
written alone, without writing the whole function's type.
This leaves /only/ the varargs case where the explicit type is required.
Given the special type syntax in call instructions, the regex-fu used
for migration was a bit more involved in its own unique way (as every
one of these is) so here it is. Use it in conjunction with the apply.sh
script and associated find/xargs commands I've provided in rr230786 to
migrate your out of tree tests. Do let me know if any of this doesn't
cover your cases & we can iterate on a more general script/regexes to
help others with out of tree tests.
About 9 test cases couldn't be automatically migrated - half of those
were functions returning function pointers, where I just had to manually
delete the function argument types now that we didn't need an explicit
function type there. The other half were typedefs of function types used
in calls - just had to manually drop the * from those.
import fileinput
import sys
import re
pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)')
addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$")
func_end = re.compile("(?:void.*|\)\s*)\*$")
def conv(match, line):
if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)):
return line
return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():]
for line in sys.stdin:
sys.stdout.write(conv(re.search(pat, line), line))
llvm-svn: 235145
Many of these predate llvm-readobj. With elf-dump we had to match
a relocation to symbol number and symbol number to symbol name or
section number.
llvm-svn: 235015
Similar to gep (r230786) and load (r230794) changes.
Similar migration script can be used to update test cases, which
successfully migrated all of LLVM and Polly, but about 4 test cases
needed manually changes in Clang.
(this script will read the contents of stdin and massage it into stdout
- wrap it in the 'apply.sh' script shown in previous commits + xargs to
apply it over a large set of test cases)
import fileinput
import sys
import re
rep = re.compile(r"(getelementptr(?:\s+inbounds)?\s*\()((<\d*\s+x\s+)?([^@]*?)(|\s*addrspace\(\d+\))\s*\*(?(3)>)\s*)(?=$|%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|zeroinitializer|<|\[\[[a-zA-Z]|\{\{)", re.MULTILINE | re.DOTALL)
def conv(match):
line = match.group(1)
line += match.group(4)
line += ", "
line += match.group(2)
return line
line = sys.stdin.read()
off = 0
for match in re.finditer(rep, line):
sys.stdout.write(line[off:match.start()])
sys.stdout.write(conv(match))
off = match.end()
sys.stdout.write(line[off:])
llvm-svn: 232184
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
llvm-svn: 230794
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
Now that `Metadata` is typeless, reflect that in the assembly. These
are the matching assembly changes for the metadata/value split in
r223802.
- Only use the `metadata` type when referencing metadata from a call
intrinsic -- i.e., only when it's used as a `Value`.
- Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode`
when referencing it from call intrinsics.
So, assembly like this:
define @foo(i32 %v) {
call void @llvm.foo(metadata !{i32 %v}, metadata !0)
call void @llvm.foo(metadata !{i32 7}, metadata !0)
call void @llvm.foo(metadata !1, metadata !0)
call void @llvm.foo(metadata !3, metadata !0)
call void @llvm.foo(metadata !{metadata !3}, metadata !0)
ret void, !bar !2
}
!0 = metadata !{metadata !2}
!1 = metadata !{i32* @global}
!2 = metadata !{metadata !3}
!3 = metadata !{}
turns into this:
define @foo(i32 %v) {
call void @llvm.foo(metadata i32 %v, metadata !0)
call void @llvm.foo(metadata i32 7, metadata !0)
call void @llvm.foo(metadata i32* @global, metadata !0)
call void @llvm.foo(metadata !3, metadata !0)
call void @llvm.foo(metadata !{!3}, metadata !0)
ret void, !bar !2
}
!0 = !{!2}
!1 = !{i32* @global}
!2 = !{!3}
!3 = !{}
I wrote an upgrade script that handled almost all of the tests in llvm
and many of the tests in cfe (even handling many `CHECK` lines). I've
attached it (or will attach it in a moment if you're speedy) to PR21532
to help everyone update their out-of-tree testcases.
This is part of PR21532.
llvm-svn: 224257
On MachO, and MachO only, we cannot have a truly empty function since that
breaks the linker logic for atomizing the section.
When we are emitting a frame pointer, the presence of an unreachable will
create a cfi instruction pointing past the last instruction. This is perfectly
fine. The FDE information encodes the pc range it applies to. If some tool
cannot handle this, we should explicitly say which bug we are working around
and only work around it when it is actually relevant (not for ELF for example).
Given the unreachable we could omit the .cfi_def_cfa_register, but then
again, we could also omit the entire function prologue if we wanted to.
llvm-svn: 217801
This commit adds a weak variant of the cmpxchg operation, as described
in C++11. A cmpxchg instruction with this modifier is permitted to
fail to store, even if the comparison indicated it should.
As a result, cmpxchg instructions must return a flag indicating
success in addition to their original iN value loaded. Thus, for
uniformity *all* cmpxchg instructions now return "{ iN, i1 }". The
second flag is 1 when the store succeeded.
At the DAG level, a new ATOMIC_CMP_SWAP_WITH_SUCCESS node has been
added as the natural representation for the new cmpxchg instructions.
It is a strong cmpxchg.
By default this gets Expanded to the existing ATOMIC_CMP_SWAP during
Legalization, so existing backends should see no change in behaviour.
If they wish to deal with the enhanced node instead, they can call
setOperationAction on it. Beware: as a node with 2 results, it cannot
be selected from TableGen.
Currently, no use is made of the extra information provided in this
patch. Test updates are almost entirely adapting the input IR to the
new scheme.
Summary for out of tree users:
------------------------------
+ Legacy Bitcode files are upgraded during read.
+ Legacy assembly IR files will be invalid.
+ Front-ends must adapt to different type for "cmpxchg".
+ Backends should be unaffected by default.
llvm-svn: 210903
TableGen has a fairly dubious heuristic to decide whether an alias should be
printed: does the alias have lest operands than the real instruction. This is
bad enough (particularly with no way to override it), but it should at least be
calculated consistently for both strings.
This patch implements that logic: first get the *correct* string for the
variant, in the same way as the Matcher, without guessing; then count the
number of whitespace chars.
There are basically 4 changes this brings about after the previous
commits; all of these appear to be good, so I have changed the tests:
+ ARM64: we print "neg X, Y" instead of "sub X, xzr, Y".
+ ARM64: we skip implicit "uxtx" and "uxtw" modifiers.
+ Sparc: we print "mov A, B" instead of "or %g0, A, B".
+ Sparc: we print "fcmpX A, B" instead of "fcmpX %fcc0, A, B"
llvm-svn: 208969
MSVC always places the implicit sret parameter after the implicit this
parameter of instance methods. We used to handle this for
x86_thiscallcc by allocating the sret parameter on the stack and leaving
the this pointer in ecx, but that doesn't handle alternative calling
conventions like cdecl, stdcall, fastcall, or the win64 convention.
Instead, change the verifier to allow sret on the second parameter.
This also requires changing the Mips and X86 backends to return the
argument with the sret parameter, instead of assuming that the sret
parameter comes first.
The Sparc backend also returns sret parameters in a register, but I
wasn't able to update it to handle secondary sret parameters. It
currently calls report_fatal_error if you feed it an sret in the second
parameter.
Reviewers: rafael.espindola, majnemer
Differential Revision: http://reviews.llvm.org/D3617
llvm-svn: 208453
These tests were failing on some buildbots after r206548 (reverted in
r206556), but passing locally.
They were missing target triples, so maybe that's the problem?
llvm-svn: 206621
These linkages were introduced some time ago, but it was never very
clear what exactly their semantics were or what they should be used
for. Some investigation found these uses:
* utf-16 strings in clang.
* non-unnamed_addr strings produced by the sanitizers.
It turns out they were just working around a more fundamental problem.
For some sections a MachO linker needs a symbol in order to split the
section into atoms, and llvm had no idea that was the case. I fixed
that in r201700 and it is now safe to use the private linkage. When
the object ends up in a section that requires symbols, llvm will use a
'l' prefix instead of a 'L' prefix and things just work.
With that, these linkages were already dead, but there was a potential
future user in the objc metadata information. I am still looking at
CGObjcMac.cpp, but at this point I am convinced that linker_private
and linker_private_weak are not what they need.
The objc uses are currently split in
* Regular symbols (no '\01' prefix). LLVM already directly provides
whatever semantics they need.
* Uses of a private name (start with "\01L" or "\01l") and private
linkage. We can drop the "\01L" and "\01l" prefixes as soon as llvm
agrees with clang on L being ok or not for a given section. I have two
patches in code review for this.
* Uses of private name and weak linkage.
The last case is the one that one could think would fit one of these
linkages. That is not the case. The semantics are
* the linker will merge these symbol by *name*.
* the linker will hide them in the final DSO.
Given that the merging is done by name, any of the private (or
internal) linkages would be a bad match. They allow llvm to rename the
symbols, and that is really not what we want. From the llvm point of
view, these objects should really be (linkonce|weak)(_odr)?.
For now, just keeping the "\01l" prefix is probably the best for these
symbols. If we one day want to have a more direct support in llvm,
IMHO what we should add is not a linkage, it is just a hidden_symbol
attribute. It would be applicable to multiple linkages. For example,
on weak it would produce the current behavior we have for objc
metadata. On internal, it would be equivalent to private (and we
should then remove private).
llvm-svn: 203866
The syntax for "cmpxchg" should now look something like:
cmpxchg i32* %addr, i32 42, i32 3 acquire monotonic
where the second ordering argument gives the required semantics in the case
that no exchange takes place. It should be no stronger than the first ordering
constraint and cannot be either "release" or "acq_rel" (since no store will
have taken place).
rdar://problem/15996804
llvm-svn: 203559
Summary:
AsmPrinter::EmitInlineAsm() will no longer use the EmitRawText() call for
targets with mature MC support. Such targets will always parse the inline
assembly (even when emitting assembly). Targets without mature MC support
continue to use EmitRawText() for assembly output.
The hasRawTextSupport() check in AsmPrinter::EmitInlineAsm() has been replaced
with MCAsmInfo::UseIntegratedAs which when true, causes the integrated assembler
to parse inline assembly (even when emitting assembly output). UseIntegratedAs
is set to true for targets that consider any failure to parse valid assembly
to be a bug. Target specific subclasses generally enable the integrated
assembler in their constructor. The default value can be overridden with
-no-integrated-as.
All tests that rely on inline assembly supporting invalid assembly (for example,
those that use mnemonics such as 'foo' or 'hello world') have been updated to
disable the integrated assembler.
Changes since review (and last commit attempt):
- Fixed test failures that were missed due to configuration of local build.
(fixes crash.ll and a couple others).
- Fixed tests that happened to pass because the local build was on X86
(should fix 2007-12-17-InvokeAsm.ll)
- mature-mc-support.ll's should no longer require all targets to be compiled.
(should fix ARM and PPC buildbots)
- Object output (-filetype=obj and similar) now forces the integrated assembler
to be enabled regardless of default setting or -no-integrated-as.
(should fix SystemZ buildbots)
Reviewers: rafael
Reviewed By: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2686
llvm-svn: 201333
The SWAP instruction only exists in a 32-bit variant, but the 64-bit
atomic swap can be implemented in terms of CASX, like the other atomic
rmw primitives.
llvm-svn: 200453
Otherwise, assembler (gas) fails to assemble them with error message "operation
combines symbols in different segments". This is because MC computes
pc_rel entries with subtract expression between labels from different sections.
llvm-svn: 200373
When creating a virtual register for a def, the value type should be
used to pick the register class. If we only use the register class
constraint on the instruction, we might pick a too large register class.
Some registers can store values of different sizes. For example, the x86
xmm registers can hold f32, f64, and 128-bit vectors. The three
different value sizes are represented by register classes with identical
register sets: FR32, FR64, and VR128. These register classes have
different spill slot sizes, so it is important to use the right one.
The register class constraint on an instruction doesn't necessarily care
about the size of the value its defining. The value type determines
that.
This fixes a problem where InstrEmitter was picking 32-bit register
classes for 64-bit values on SPARC.
llvm-svn: 199187
Targets like SPARC and MIPS have delay slots and normally bundle the
delay slot instruction with the corresponding terminator.
Teach isBlockOnlyReachableByFallthrough to find any MBB operands on
bundled terminators so SPARC doesn't need to specialize this function.
llvm-svn: 199061
This is different from the argument passing convention which puts the
first float argument in %f1.
With this patch, all returned floats are treated as if the 'inreg' flag
were set. This means multiple float return values get packed in %f0,
%f1, %f2, ...
Note that when returning a struct in registers, clang will set the
'inreg' flag on the return value, so that behavior is unchanged. This
also happens when returning a float _Complex.
llvm-svn: 199028
Walter Lee