This changes the order of output sections and the output assembly, but
is otherwise NFC.
It simplifies the TLOF interface by removing two COFF-only methods.
This rewrites big parts of the fast register allocator. The basic
strategy of doing block-local allocation hasn't changed but I tweaked
several details:
Track register state on register units instead of physical
registers. This simplifies and speeds up handling of register aliases.
Process basic blocks in reverse order: Definitions are known to end
register livetimes when walking backwards (contrary when walking
forward then uses may or may not be a kill so we need heuristics).
Check register mask operands (calls) instead of conservatively
assuming everything is clobbered. Enhance heuristics to detect
killing uses: In case of a small number of defs/uses check if they are
all in the same basic block and if so the last one is a killing use.
Enhance heuristic for copy-coalescing through hinting: We check the
first k defs of a register for COPYs rather than relying on there just
being a single definition. When testing this on the full llvm
test-suite including SPEC externals I measured:
average 5.1% reduction in code size for X86, 4.9% reduction in code on
aarch64. (ranging between 0% and 20% depending on the test) 0.5%
faster compiletime (some analysis suggests the pass is slightly slower
than before, but we more than make up for it because later passes are
faster with the reduced instruction count)
Also adds a few testcases that were broken without this patch, in
particular bug 47278.
Patch mostly by Matthias Braun
This seems to have caused incorrect register allocation in some cases,
breaking tests in the Zig standard library (PR47278).
As discussed on the bug, revert back to green for now.
> Record internal state based on register units. This is often more
> efficient as there are typically fewer register units to update
> compared to iterating over all the aliases of a register.
>
> Original patch by Matthias Braun, but I've been rebasing and fixing it
> for almost 2 years and fixed a few bugs causing intermediate failures
> to make this patch independent of the changes in
> https://reviews.llvm.org/D52010.
This reverts commit 66251f7e1d, and
follow-ups 931a68f26b
and 0671a4c508. It also adjust some
test expectations.
This adds SoftenFloatRes, PromoteFloatRes and SoftPromoteHalfRes
legalizations for VECREDUCE, to fill the remaining hole in the SDAG
legalization. These legalizations simply expand the reduction and
let it be recursively legalized. For the PromoteFloatRes case at
least it is possible to do better than that, but it's pretty tricky
(because we need to consider the interaction of three different
vector legalizations and the type promotion) and probably not
really worthwhile.
I haven't added ExpandFloatRes support, as I am not familiar with
ppc_fp128.
Differential Revision: https://reviews.llvm.org/D87569
Similar to D87415, this folds the various float min/max opcodes
with a constant INF or -INF operand, or FLT_MAX / -FLT_MAX operand
if the ninf flag is set. Some of the folds are only possible under
nnan.
The fminnum(X, INF) with nnan and fmaxnum(X, -INF) with nnan cases
are needed to improve the VECREDUCE_FMIN/FMAX lowerings on X86,
the rest is here for the sake of completeness.
Differential Revision: https://reviews.llvm.org/D87571
LLVM will canonicalize conditional selectors to a different pattern than the old code that was used.
This is updating the function to match the new expected patterns and select SSAT or USAT when successful.
Tests have also been updated to use the new patterns.
Differential Review: https://reviews.llvm.org/D87379
Treating an SoImm offset as a multiple of 4 between -1020 and 1020
mis-handles the second of a pair of 16-bit constants where the offset is a multiple of 2 but not a multiple of 4,
leading to an LLVM ERROR: out of range pc-relative fixup value
For 32-bit and larger (64-bit) constants, continue to treat an SoImm offset as a multiple of 4 between -1020 and 1020.
For smaller (16-bit) constants, treat an SoImm offset as a multiple of 1 between -255 and 255.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D86949
Clang emits (and (ctpop X), 1) for __builtin_parity. If ctpop
isn't natively supported by the target, this leads to poor codegen
due to the expansion of ctpop being more complex than what is needed
for parity.
This adds a DAG combine to convert the pattern to ISD::PARITY
before operation legalization. Type legalization is updated
to handled Expanding and Promoting this operation. If after type
legalization, CTPOP is supported for this type, LegalizeDAG will
turn it back into CTPOP+AND. Otherwise LegalizeDAG will emit a
series of shifts and xors followed by an AND with 1.
I've avoided vectors in this patch to avoid more legalization
complexity for this patch.
X86 previously had a custom DAG combiner for this. This is now
moved to Custom lowering for the new opcode. There is a minor
regression in vector-reduce-xor-bool.ll, but a follow up patch
can easily fix that.
Fixes PR47433
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D87209
fminnum(X, NaN) is X, fminimum(X, NaN) is NaN. This mirrors the
behavior of existing InstSimplify folds.
This is expected to improve the reduction lowerings in D87391,
which use NaN as a neutral element.
Differential Revision: https://reviews.llvm.org/D87415
In getMemcpyLoadsAndStores(), a memcpy where the source is a zero constant is expanded to a MemOp::Set instead of a MemOp::Copy, even when the memcpy is volatile.
This is incorrect.
The fix is to add a check for volatile, and expand to MemOp::Copy in the volatile case.
Reviewed By: chill
Differential Revision: https://reviews.llvm.org/D87134
This patch implements the foldMemoryOperand hook in Thumb1InstrInfo,
allowing tBLXr and a spilled function address to be combined back into a
tBL. This can help with codesize at Oz, especailly in the tinycrypt
library.
Differential Revision: https://reviews.llvm.org/D79785
Skip this for now, to avoid a backend crash in:
UNREACHABLE executed at llvm/lib/Target/ARM/ARMISelLowering.cpp:13412
This should fix PR45824.
Differential Revision: https://reviews.llvm.org/D86784
This patch adjusts the following ARM/AArch64 LLVM IR intrinsics:
- neon_bfmmla
- neon_bfmlalb
- neon_bfmlalt
so that they take and return bf16 and float types. Previously these
intrinsics used <8 x i8> and <4 x i8> vectors (a rudiment from
implementation lacking bf16 IR type).
The neon_vbfdot[q] intrinsics are adjusted similarly. This change
required some additional selection patterns for vbfdot itself and
also for vector shuffles (in a previous patch) because of SelectionDAG
transformations kicking in and mangling the original code.
This patch makes the generated IR cleaner (less useless bitcasts are
produced), but it does not affect the final assembly.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D86146
When joining the legal parts of vector arguments into its original value
during the lower of Formal Arguments in SelectionDAGBuilder, the Calling
Convention information was not being propagated for the handling of each
individual parts. The same did not happen when lowering calls, causing a
mismatch.
This patch fixes the issue by properly propagating the Calling
Convention details.
This fixes Bugzilla #47001.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D86715
Enable default outlining when the function has the minsize attribute
and we're targeting an m-class core.
Differential Revision: https://reviews.llvm.org/D82951
Fix the ARM backend's analyzeBranch so it doesn't ignore predicated
return instructions, and make the MachineVerifier rule more strict.
Differential Revision: https://reviews.llvm.org/D40061
Use the stack to save and restore the link register when there is no
available register to do it.
Differential Revision: https://reviews.llvm.org/D76069
The ARM backend breaks some specific immediates to two parts
in binary operations. And this patch adds more tests
for that.
Reviewed By: samparker
Differential Revision: https://reviews.llvm.org/D84100
This patch restricts the behaviour of referencing via .Lfoo$local
local aliases, introduced in https://reviews.llvm.org/D73230, to
STV_DEFAULT globals only.
Hidden symbols via --fvisiblity=hidden (https://gcc.gnu.org/wiki/Visibility)
is an important scenario.
Benefits:
- Improves the size of object files by using fewer STT_SECTION symbols.
- The code reads a bit better (it was not obvious to me without going
back to the code reviews why the canBenefitFromLocalAlias function
currently doesn't consider visibility).
- There is also a side benefit in restoring the effectiveness of the
--wrap linker option and making the behavior of --wrap consistent
between LTO and normal builds for references within a translation-unit.
Note: this --wrap behavior (which is specific to LLD) should not be
considered reliable. See comments on https://reviews.llvm.org/D73230
for more.
Differential Revision: https://reviews.llvm.org/D85782
Similarly as for pointers, even for integers a == b is usually false.
GCC also uses this heuristic.
Reviewed By: ebrevnov
Differential Revision: https://reviews.llvm.org/D85781
Similarly as for pointers, even for integers a == b is usually false.
GCC also uses this heuristic.
Reviewed By: ebrevnov
Differential Revision: https://reviews.llvm.org/D85781
Similarly as for pointers, even for integers a == b is usually false.
GCC also uses this heuristic.
Reviewed By: ebrevnov
Differential Revision: https://reviews.llvm.org/D85781
IT blocks with more than one instruction were performance deprecated in Armv8
but that doesn't mean we should follow that advise when optimising for size.
Differential Revision: https://reviews.llvm.org/D85638
As mentioned on D85463, we should be using SimplifyMultipleUseDemandedBits (which is the default fallback).
The minor regression in illegal-bitfield-loadstore.ll will be addressed properly by D77804.
Added patterns so that both SSAT and USAT instructions are generated with shifts. Added corresponding regression tests.
Differential Review: https://reviews.llvm.org/D85120
In MachineCopyPropagation::BackwardPropagatableCopy(),
a check is added for multiple destination registers.
The copy propagation is avoided if the copied destination register
is the same register as another destination on the same instruction.
A new test is added. This used to fail on ARM like this:
error: unpredictable instruction, RdHi and RdLo must be different
umull r9, r9, lr, r0
Reviewed By: lkail
Differential Revision: https://reviews.llvm.org/D82638
Optimize some specific immediates selection by materializing them with sub/mvn
instructions as opposed to loading them from the constant pool.
Patch by Ben Shi, powerman1st@163.com.
Differential Revision: https://reviews.llvm.org/D83745
Many Thumb1 instructions are defined to set CPSR if executed outside an IT
block, but leave it alone from inside one. In MachineIR this is represented by
whether an optional register is CPSR or NoReg (0), and affects how the
instructions are printed.
This sets the instruction to the appropriate form during if-conversion.
Summary:
[Thumb] set code alignment for 16-bit load from constant pool
LLVM miscompiles this code when compiling for a target with v8.2-A FP16 and the Thumb ISA at -O0:
extern void bar(__fp16 P5);
int main() {
__fp16 P5 = 1.96875;
bar(P5);
}
The code section containing main has 2 byte alignment.
It needs to have 4 byte alignment,
because the load literal instruction has an offset from the
load address with the low 2 bits zeroed.
I do not include a test case in this check-in.
llc and llvm-mc do not exhibit this bug. They do not set code section alignment
in the same manner as clang.
Reviewers: dnsampaio
Reviewed By: dnsampaio
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D84169
Its effect could be achieved by
`-stop-after`,`-print-after`,`-print-after-all`. But a few tests need to
print MIR after ISel which could not be done with
`-print-after`/`-stop-after` since isel pass does not have commandline name.
That's the reason `--print-machineinstrs` is downgraded to
`--print-after-isel` in this patch. `--print-after-isel` could be
removed after we switch to new pass manager since isel pass would have a
commandline text name to use `print-after` or equivalent switches.
The motivation of this patch is to reduce tests dependency on
would-be-deprecated feature.
Reviewed By: arsenm, dsanders
Differential Revision: https://reviews.llvm.org/D83275
MBBs are not allowed to have non-terminator instructions after the first
terminator. Currently in some cases (see the modified test),
EmitSchedule can add DBG_VALUEs after the last terminator, for example
when referring a debug value that gets folded into a TCRETURN
instruction on ARM.
This patch updates EmitSchedule to move inserted DBG_VALUEs just before
the first terminator. I am not sure if there are terminators produce
values that can in turn be used by a DBG_VALUE. In that case, moving the
DBG_VALUE might result in referencing an undefined register. But in any
case, it seems like currently there is no way to insert a proper DBG_VALUEs
for such registers anyways.
Alternatively it might make sense to just remove those extra DBG_VALUES.
I am not too familiar with the details of debug info in the backend and
would appreciate any suggestions on how to address the issue in the best
possible way.
Reviewers: vsk, aprantl, jpaquette, efriedma, paquette
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83561
Vector bitwise selects are matched by pseudo VBSP instruction
and expanded to VBSL/VBIT/VBIF after register allocation
depend on operands registers to minimize extra copies.
The existing code already considered this case. Unfortunately a typo in
the condition prevents it from triggering. Also the existing code, had
it run, forgot to do the folding.
This fixes PR42876.
Differential Revision: https://reviews.llvm.org/D65802
The following: https://reviews.llvm.org/D82552
fixed an assert in the SelectionDag ISel legalizer for some CCs on armv7.
I noticed that this fix also fixes the assert when using fastcc, so I am
adding a fastcc regression test here.
Differential Revision: https://reviews.llvm.org/D82443
Summary:
When legalizing a biscast operation from an fp16 operand to an i16 on a
target that requires both input and output types to be promoted to
32-bits, an assertion can fail when building the new node due to a
mismatch between the the operation's result size and the type specified to
the node.
This patches fix the issue by making sure the bit width of the types
match for the FP_TO_FP16 node, covering the difference with an extra
ANYEXTEND operation.
Reviewers: ostannard, efriedma, pirama, jmolloy, plotfi
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82552
Whether an instruction is deemed to have side effects in determined by
whether it has a tblgen pattern that emits a single instruction.
Because of the way a lot of the the vcvt instructions are specified
either in dagtodag code or with patterns that emit multiple
instructions, they don't get marked as not having side effects.
This just marks them as not having side effects manually. It can help
especially with instruction scheduling, to not create artificial
barriers, but one of these tests also managed to produce fewer
instructions.
Differential Revision: https://reviews.llvm.org/D81639
Move the Thumb2SizeReduce pass to before IfConversion when optimising
for minimal code size.
Running the Thumb2SizeReduction pass before IfConversionallows T1
instructions to propagate to the final output, rather than the
ifConverter modifying T2 instructions and preventing them from being
reduced later.
This change does introduce a regression regarding execution time, so
it's only applied when optimising for size.
Running the LLVM Test Suite with this change produces a geomean
difference of -0.1% for the size..text metric.
Differential Revision: https://reviews.llvm.org/D82439
Before this instruction supported output values, it fit fairly
naturally as a terminator. However, being a terminator while also
supporting outputs causes some trouble, as the physreg->vreg COPY
operations cannot be in the same block.
Modeling it as a non-terminator allows it to be handled the same way
as invoke is handled already.
Most of the changes here were created by auditing all the existing
users of MachineBasicBlock::isEHPad() and
MachineBasicBlock::hasEHPadSuccessor(), and adding calls to
isInlineAsmBrIndirectTarget or mayHaveInlineAsmBr, as appropriate.
Reviewed By: nickdesaulniers, void
Differential Revision: https://reviews.llvm.org/D79794
Similar to the recent patch for fpext, this adds vcvtb and vcvtt with
insert into vector instruction selection patterns for fptruncs. This
helps clear up a lot of register shuffling that we would otherwise do.
Differential Revision: https://reviews.llvm.org/D81637
We current extract and convert from a top lane of a f16 vector using a
VMOVX;VCVTB pair. We can simplify that to use a single VCVTT. The
pattern is mostly copied from a vector extract pattern, but produces a
VCVTTHS f32 directly.
This had to move some code around so that ARMInstrVFP had access to the
required pattern frags that were previously part of ARMInstrNEON.
Differential Revision: https://reviews.llvm.org/D81556
Summary:
This change permits scalar bfloats to be loaded, stored, moved and
used as function call arguments and return values, whenever the bf16
feature is supported by the subtarget.
Previously that was only supported in the presence of the fullfp16
feature, because the code generation strategy depended on instructions
from that extension. This change adds alternative code generation
strategies so that those operations can be done even without fullfp16.
The strategy for loads and stores is to replace VLDRH/VSTRH with
integer LDRH/STRH plus a move between register classes. I've written
isel patterns for those, conditional on //not// having the fullfp16
feature (so that in the fullfp16 case, the existing patterns will
still be used).
For function arguments and returns, instead of writing isel patterns
to match `VMOVhr` and `VMOVrh`, I've avoided generating those SDNodes
in the first place, by factoring out the code that constructs them
into helper functions `MoveToHPR` and `MoveFromHPR` which have a
fallback for non-fullfp16 subtargets.
The current output code is not especially pretty: in the new test file
you can see unnecessary store/load pairs implementing no-op bitcasts,
and lots of pointless moves back and forth between FP registers and
GPRs. But it at least works, which is an improvement on the previous
situation.
Reviewers: dmgreen, SjoerdMeijer, stuij, chill, miyuki, labrinea
Reviewed By: dmgreen, labrinea
Subscribers: labrinea, kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82372
The VLLDM and VLSTM instructions are incompletely specified. They
(potentially) write (or read, respectively) registers Q0-Q7, VPR, and
FPSCR, but the compiler is unaware of it.
In the new test case `cmse-vlldm-no-reorder.ll` case the compiler
missed an anti-dependency and reordered a `VLLDM` ahead of the
instruction, which stashed the return value from the non-secure call,
effectively clobbering said value.
This test case does not fail with upstream LLVM, because of scheduling
differences and I couldn't find a test case for the VLSTM either.
Differential Revision: https://reviews.llvm.org/D81586
This patch adds codegen for the following BFloat
operations to the ARM backend:
* concatenation of bf16 vectors
* bf16 vector element extraction
* bf16 vector element insertion
* duplication of a bf16 value into each lane of a vector
* duplication of a bf16 vector lane into each lane
Differential Revision: https://reviews.llvm.org/D81411
This patch adds basic support for BFloat in the Arm backend.
For now the code generation relies on fullfp16 being present.
Briefly:
* adds the bfloat scalar and vector types in the necessary register classes,
* adjusts the calling convention to cope with bfloat argument passing and return,
* adds codegen patterns for moves, loads and stores.
It's tested mostly by the intrinsic patches that depend on it (load/store, convert/copy).
The following people contributed to this patch:
* Alexandros Lamprineas
* Ties Stuij
Differential Revision: https://reviews.llvm.org/D81373
Summary:
As half-precision floating point arguments and returns were previously
coerced to either float or int32 by clang's codegen, the CMSE handling
of those was also performed in clang's side by zeroing the unused MSBs
of the coercer values.
This patch moves this handling to the backend's calling convention
lowering, making sure the high bits of the registers used by
half-precision arguments and returns are zeroed.
Reviewers: chill, rjmccall, ostannard
Reviewed By: ostannard
Subscribers: kristof.beyls, hiraditya, danielkiss, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D81428
Summary:
Half-precision floating point arguments and returns are currently
promoted to either float or int32 in clang's CodeGen and there's
no existing support for the lowering of `half` arguments and returns
from IR in AArch32's backend.
Such frontend coercions, implemented as coercion through memory
in clang, can cause a series of issues in argument lowering, as causing
arguments to be stored on the wrong bits on big-endian architectures
and incurring in missing overflow detections in the return of certain
functions.
This patch introduces the handling of half-precision arguments and returns in
the backend using the actual "half" type on the IR. Using the "half"
type the backend is able to properly enforce the AAPCS' directions for
those arguments, making sure they are stored on the proper bits of the
registers and performing the necessary floating point convertions.
Reviewers: rjmccall, olista01, asl, efriedma, ostannard, SjoerdMeijer
Reviewed By: ostannard
Subscribers: stuij, hiraditya, dmgreen, llvm-commits, chill, dnsampaio, danielkiss, kristof.beyls, cfe-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75169
Outline chunks of code which need to save and restore the link register
when a spare register can be used to it.
Differential Revision: https://reviews.llvm.org/D80127
Summary:
The naked function attribute is meant to suppress all function
prologue/epilogue instructions.
On ARM, some are still emitted if an argument greater than 64 bytes in size
(the threshold for using the byval attribute in IR) is passed partially
in registers.
Perform the check for Attribute::Naked and early exit in
SelectionDAGISel::LowerArguments().
Checking in ARMFrameLowering::determineCalleeSaves() is too late.
A test case is included.
Reviewers: llvm-commits, olista01, danielkiss
Reviewed By: danielkiss
Subscribers: kristof.beyls, hiraditya, danielkiss
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80715
Change-Id: Icedecf2a4ad31bc3c35ab0df7489a9d346e1f7cc
Summary:
With -mbig-endian -mexecute-only and targeting an fpu,
an incorrect sequence of movw/movt was generated to construct a double literal.
The test suite was hardwired to check these wrong values.
The fault was caused by the explicit word swap in LowerConstantFP().
With -mbig-endian -mexecute-only -mfpu=none, a correct sequence of
movw/movt is generated to construct a double literal.
The test suite did not test this no fpu case.
The test suite expected values have been corrected.
The test file is updated to add testing of fpu=none case
Reviewers: christof, llvm-commits, dmgreen
Reviewed By: dmgreen
Subscribers: dmgreen, kristof.beyls, hiraditya, danielkiss
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81259
Change-Id: Ia3737df243218c89c82f02b7f9f4032ecd5a3917
Record internal state based on register units. This is often more
efficient as there are typically fewer register units to update
compared to iterating over all the aliases of a register.
Original patch by Matthias Braun, but I've been rebasing and fixing it
for almost 2 years and fixed a few bugs causing intermediate failures
to make this patch independent of the changes in
https://reviews.llvm.org/D52010.
Let the codegen recognized the nomerge attribute and disable branch folding when the attribute is given
Differential Revision: https://reviews.llvm.org/D79537
Summary:
Instead of generating two i32 instructions for each load or store of a volatile
i64 value (two LDRs or STRs), now emit LDRD/STRD.
These improvements cover architectures implementing ARMv5TE or Thumb-2.
The code generation explicitly deviates from using the register-offset
variant of LDRD/STRD. In this variant, the register allocated to the
register-offset cannot be reused in any of the remaining operands. Such
restriction seems to be non-trivial to implement in LLVM, thus it is
left as a to-do.
Differential Revision: https://reviews.llvm.org/D70072
When performing codegen at optnone, don't add alias analysis to
the pipeline. We don't need it, but it causes an unnecessary
dominator tree calculation.
I've also moved the module verifier call to the top so that a bunch
of disabled-at-optnone passes group more nicely.
Differential Revision: https://reviews.llvm.org/D80378
This temporarily reverts commit 7019cea26d.
It seems that, for some targets, there are instructions with a lot of memory operands (probably more than would be expected). This causes a lot of buildbots to timeout and notify failed builds. While investigations are ongoing to find out why this happens, revert the changes.
This reverts commit 8a12553223.
A bug has been found when generating code for Thumb2. In some very
specific cases, the prologue/epilogue emitter generates erroneous stack
offsets for the new LDRD instructions that access the stack.
This bug does not seem to be caused by the reverted patch though. Likely
the latter has made an undiscovered issue emerge in the
prologue/epilogue emission pass. Nevertheless, this reversion is
necessary since it is blocking users of the ARM backend.
Summary:
To support all targets, the mayAlias member function needs to support instructions with multiple operands.
This revision also changes the order of the emitted instructions in some test cases.
Reviewers: efriedma, hfinkel, craig.topper, dmgreen
Reviewed By: efriedma
Subscribers: MatzeB, dmgreen, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80161
Summary:
In the the given example, a stack slot pointer is merged
between a setjmp and longjmp. This pointer is spilled,
so it does not get correctly restored, addinga undefined
behaviour where it shouldn't.
Change-Id: I60ec010844f2a24ce01ceccf12eb5eba5ab94abb
Reviewers: eli.friedman, thanm, efriedma
Reviewed By: efriedma
Subscribers: MatzeB, qcolombet, tpr, rnk, efriedma, hiraditya, llvm-commits, chill
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77767
Enables Machine Outlining for ARM and Thumb2 modes. This is the first
patch of the series which adds all the basic logic for the support, and
only handles tail-calls and thunks.
The outliner can be turned on by using clang -moutline option or -mllvm
-enable-machine-outliner one (like AArch64).
Differential Revision: https://reviews.llvm.org/D76066
For IR generated by a compiler, this is really simple: you just take the
datalayout from the beginning of the file, and apply it to all the IR
later in the file. For optimization testcases that don't care about the
datalayout, this is also really simple: we just use the default
datalayout.
The complexity here comes from the fact that some LLVM tools allow
overriding the datalayout: some tools have an explicit flag for this,
some tools will infer a datalayout based on the code generation target.
Supporting this properly required plumbing through a bunch of new
machinery: we want to allow overriding the datalayout after the
datalayout is parsed from the file, but before we use any information
from it. Therefore, IR/bitcode parsing now has a callback to allow tools
to compute the datalayout at the appropriate time.
Not sure if I covered all the LLVM tools that want to use the callback.
(clang? lli? Misc IR manipulation tools like llvm-link?). But this is at
least enough for all the LLVM regression tests, and IR without a
datalayout is not something frontends should generate.
This change had some sort of weird effects for certain CodeGen
regression tests: if the datalayout is overridden with a datalayout with
a different program or stack address space, we now parse IR based on the
overridden datalayout, instead of the one written in the file (or the
default one, if none is specified). This broke a few AVR tests, and one
AMDGPU test.
Outside the CodeGen tests I mentioned, the test changes are all just
fixing CHECK lines and moving around datalayout lines in weird places.
Differential Revision: https://reviews.llvm.org/D78403
This patch implements the final bits of CMSE code generation:
* emit special linker symbols
* restrict parameter passing to no use memory
* emit BXNS and BLXNS instructions for returns from non-secure entry
functions, and non-secure function calls, respectively
* emit code to save/restore secure floating-point state around calls
to non-secure functions
* emit code to save/restore non-secure floating-pointy state upon
entry to non-secure entry function, and return to non-secure state
* emit code to clobber registers not used for arguments and returns
* when switching to no-secure state
Patch by Momchil Velikov, Bradley Smith, Javed Absar, David Green,
possibly others.
Differential Revision: https://reviews.llvm.org/D76518
allocas in LLVM IR have a specified alignment. When that alignment is
specified, the alloca has at least that alignment at runtime.
If the specified type of the alloca has a higher preferred alignment,
SelectionDAG currently ignores that specified alignment, and increases
the alignment. It does this even if it would trigger stack realignment.
I don't think this makes sense, so this patch changes that.
I was looking into this for SVE in particular: for SVE, overaligning
vscale'ed types is extra expensive because it requires realigning the
stack multiple times, or using dynamic allocation. (This currently isn't
implemented.)
I updated the expected assembly for a couple tests; in particular, for
arg-copy-elide.ll, the optimization in question does not increase the
alignment the way SelectionDAG normally would. For the rest, I just
increased the specified alignment on the allocas to match what
SelectionDAG was inferring.
Differential Revision: https://reviews.llvm.org/D79532
CorrectExtraCFGEdges function.
The latter was a workaround for "Various pieces of code" leaving bogus
extra CFG edges in place. Where by "various" it meant only
IfConverter::MergeBlocks, which failed to clear all of the successors
of dead blocks it emptied out. This wouldn't matter a whole lot,
except that the dead blocks remained listed as predecessors of
still-useful blocks, inhibiting optimizations.
This fix slightly changed two thumb tests, because the correct CFG
successors allowed for the "diamond" if-conversion pattern to be
detected, when it could only use "simple" before.
Additionally, the removal of a now-redundant call to analyzeBranch
(with AllowModify=true) in BranchFolder::OptimizeFunction caused a
later check for an empty block in BranchFolder::OptimizeBlock to
fail. Correct this by moving the call to analyzeBranch in
OptimizeBlock higher.
Differential Revision: https://reviews.llvm.org/D79527
This patch implements the final bits of CMSE code generation:
* emit special linker symbols
* restrict parameter passing to not use memory
* emit BXNS and BLXNS instructions for returns from non-secure entry
functions, and non-secure function calls, respectively
* emit code to save/restore secure floating-point state around calls
to non-secure functions
* emit code to save/restore non-secure floating-pointy state upon
entry to non-secure entry function, and return to non-secure state
* emit code to clobber registers not used for arguments and returns
when switching to no-secure state
Patch by Momchil Velikov, Bradley Smith, Javed Absar, David Green,
possibly others.
Differential Revision: https://reviews.llvm.org/D76518
Summary: Currenlty BPI unconditionally creates post dominator tree each time. While this is not incorrect we can save compile time by reusing existing post dominator tree (when it's valid) provided by analysis manager.
Reviewers: skatkov, taewookoh, yrouban
Reviewed By: skatkov
Subscribers: hiraditya, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78987
The code assumed that zero-extending the integer constant to the
designated alloc size would be fine even for BE targets, but that's not
the case as that pulls in zeros from the MSB side while we actually
expect the padding zeros to go after the LSB.
I've changed the codepath handling the constant integers to use the
store size for both small(er than u64) and big constants and then add
zero padding right after that.
Differential Revision: https://reviews.llvm.org/D78011
When compiling for a arm5te cpu from clang, the +dsp attribute is set.
This meant we could try and generate qadd8 instructions where we would
end up having no pattern. I've changed the condition here to be hasV6Ops
&& hasDSP, which is what other parts of ARMISelLowering seem to use for
similar instructions.
Fixed PR45677.
Differential Revision: https://reviews.llvm.org/D78877
Follow-up of D78082 (x86-64).
This change avoids dynamic relocations in `xray_instr_map` for ARM/AArch64/powerpc64le.
MIPS64 cannot use 64-bit PC-relative addresses because R_MIPS_PC64 is not defined.
Because MIPS32 shares the same code, for simplicity, we don't use PC-relative addresses for MIPS32 as well.
Tested on AArch64 Linux and ppc64le Linux.
Reviewed By: ianlevesque
Differential Revision: https://reviews.llvm.org/D78590
This patch upstreams support for the Armv8.6-a Matrix Multiplication
Extension. A summary of the features can be found here:
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
This patch includes:
- Assembly support for AArch32
- Intrinsics Support for AArch32 Neon Intrinsics for Matrix
Multiplication
Note: these extensions are optional in the 8.6a architecture and so have
to be enabled by default
No additional IR types or C Types are needed for this extension.
This is part of a patch series, starting with BFloat16 support and
the other components in the armv8.6a extension (in previous patches
linked in phabricator)
Based on work by:
- Luke Geeson
- Oliver Stannard
- Luke Cheeseman
Reviewers: t.p.northover, miyuki
Reviewed By: miyuki
Subscribers: miyuki, ostannard, kristof.beyls, hiraditya, danielkiss,
cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77872
These tests contain debug instructions which get checked, so we can't
insert synthetic debug info and expect the tests to pass.
The rest of the ARM backend tests appear to be fair game.
This adds some extra processing into the Pre-RA ARM load/store optimizer
to detect and merge MVE loads/stores and adds of the same base. This we
don't always turn into a post-inc during ISel, and due to the nature of
it being a graph we don't always know an order to use for the nodes, not
knowing which nodes to make post-inc and which to use the new post-inc
of. After ISel, we have an order that we can use to post-inc the
following instructions.
So this looks for a loads/store with a starting offset of 0, and an
add/sub from the same base, plus a number of other loads/stores. We then
do some checks and convert the zero offset load/store into a postinc
variant. Any loads/stores after it have the offset subtracted from their
immediates. For example:
LDR #4 LDR #4
LDR #0 LDR_POSTINC #16
LDR #8 LDR #-8
LDR #12 LDR #-4
ADD #16
It only handles MVE loads/stores at the moment. Normal loads/store will
be added in a followup patch, they just have some extra details to
ensure that we keep generating LDRD/LDM successfully.
Differential Revision: https://reviews.llvm.org/D77813
The logic in ARMParallelDSP is setup to merge two 16-bits loads into
a 32-bit load and feed them into the smlads. This requires that four
loads are combined for the four inputs, but there wasn't actually a
check for this.
Differential Revision: https://reviews.llvm.org/D78492
BreakPHIEdge would be set based on whether the instruction needs to
insert a new critical edge to allow sinking into a block where the uses
are PHI nodes. But for instructions with multiple defs it would be reset
on the second def, allowing the instruciton to sink where it should not.
Fixes PR44981
Differential Revision: https://reviews.llvm.org/D78087
Summary:
The INLINEASM MIR instructions use immediate operands to encode the values of some operands.
The MachineInstr pretty printer function already handles those operands and prints human readable annotations instead of the immediates. This patch adds similar annotations to the output of the MIRPrinter, however uses the new MIROperandComment feature.
Reviewers: SjoerdMeijer, arsenm, efriedma
Reviewed By: arsenm
Subscribers: qcolombet, sdardis, jvesely, wdng, nhaehnle, hiraditya, jrtc27, atanasyan, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78088
Summary:
No error or warning is emitted when specific reserved registers are
written to in inline assembly. Therefore, writes to the program counter
or to the frame pointer, for instance, were permitted, which could have
led to undesirable behaviour.
Example:
int foo() {
register int a __asm__("r7"); // r7 = frame-pointer in M-class ARM
__asm__ __volatile__("mov %0, r1" : "=r"(a) : : );
return a;
}
In contrast, GCC issues an error in the same scenario.
This patch detects writes to specific reserved registers in inline
assembly for ARM and emits an error in such case. The detection works
for output and input operands. Clobber operands are not handled here:
they are already covered at a later point in
AsmPrinter::emitInlineAsm(const MachineInstr *MI). The registers
covered are: program counter, frame pointer and base pointer.
This is ARM only. Therefore the implementation of other targets'
counterparts remain open to do.
Reviewers: efriedma
Reviewed By: efriedma
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76848
Previously, getWithOffset() would drop the offset if the base was null.
Because of this, MachineMemOperand would return the wrong result from
getAlign() in these cases. MachineMemOperand stores the alignment of
the pointer without the offset.
A bunch of MIR tests changed because we print the offset now.
Split off from D77687.
Differential Revision: https://reviews.llvm.org/D78049
The change introduces the usage of physical registers for non-gc deopt values.
This require runtime support to know how to take a value from register.
By default usage is off and can be switched on by option.
The change also introduces additional fix-up patch which forces the spilling
of caller saved registers (clobbered after the call) and re-writes statepoint
to use spill slots instead of caller saved registers.
Reviewers: reames, danstrushin
Reviewed By: dantrushin
Subscribers: mgorny, hiraditya, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D77797
Summary:
This fixes PR45302.
Previously the case
BB1
/ \
| |
TBB FBB
| |
\ /
BB2
was treated as a valid diamond also when TBB and FBB was the same basic
block. This then lead to a failed assertion in IfConvertDiamond.
Since TBB == FBB is quite a degenerated case of a diamond, we now
don't treat it as a valid diamond anymore, and thus we will avoid the
trouble of making IfConvertDiamond handle it correctly.
Reviewers: efriedma, kparzysz
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77651
This patch adds an analysis of the offset addresses used by gathers
and scatters to the MVEGatherScatterLowering pass to find
multiplications and additions that are loop invariant and thus can
be moved into the loop preheader, avoiding to execute them each time.
Differential Revision: https://reviews.llvm.org/D76681
Currently when the target is big-endian vmov.i64 reverses the order of the two
words of the vector. This is correct only when the underlying element type is
32-bit, as actually what it should be doing is considering it a vector of the
underlying type and reversing the elements of that.
Differential Revision: https://reviews.llvm.org/D76515
If we have an element-wise vmov immediate instruction then a subsequent vrev
with width greater or equal to the vmov element width, then that vrev won't do
anything. Add a DAG combine to convert bitcasts that would become such vrevs
into vector_reg_casts instead.
Differential Revision: https://reviews.llvm.org/D76514
Move ARM ConstantIsland and LowOverheadLopps passes later in the pipeline
such that they will be run after the upcoming Machine Outlining pass.
Differential Revision: https://reviews.llvm.org/D76065
When optimising for code size at the expense of performance, it is often
worth saving and restoring some of r0-r3, if IPRA will be able to take
advantage of them. This doesn't cost any extra code size if we already
have a PUSH/POP pair, and increases the number of available registers
across any calls to the function.
We already have an optimisation which tries fold the subtract/add of the
SP into the PUSH/POP by using extra registers, which somewhat conflicts
with this. I've made the new optimisation less aggressive in cases where
the existing one is likely to trigger, which gives better results than
either of these optimisations by themselves.
Differential revision: https://reviews.llvm.org/D69936
Summary:
This is a simple fix for CodeGenPrepare that freezes branch condition when transforming select to branch.
If it is not frozen, instsimplify or the later pipeline can potentially exploit undefined behavior.
The diff shows optimized form becase D75859 and D76048 already made a few changes to CodeGenPrepare for optimizing freeze(cmp).
Reviewers: jdoerfert, spatel, lebedev.ri, efriedma
Reviewed By: lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76179
Summary:
This is a simple fix for CodeGenPrepare that freezes branch condition when transforming select to branch.
If it is not freezed, instsimplify or the later pipeline can potentially exploit undefined behavior.
The diff shows optimized form becase D75859 and D76048 already made a few changes to CodeGenPrepare for optimizing freeze(cmp).
Reviewers: jdoerfert, spatel, lebedev.ri, efriedma
Reviewed By: lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76179
Summary:
Instead of generating two i32 instructions for each load or store of a volatile
i64 value (two LDRs or STRs), now emit LDRD/STRD.
These improvements cover architectures implementing ARMv5TE or Thumb-2.
The code generation explicitly deviates from using the register-offset
variant of LDRD/STRD. In this variant, the register allocated to the
register-offset cannot be reused in any of the remaining operands. Such
restriction seems to be non-trivial to implement in LLVM, thus it is
left as a to-do.
Reviewers: dmgreen, efriedma, john.brawn, nickdesaulniers
Reviewed By: efriedma, nickdesaulniers
Subscribers: danielkiss, alanphipps, hans, nathanchance, nickdesaulniers, vvereschaka, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70072
On some Arm cores there is a performance penalty when forwarding from an
S register to a D register. Calculating VMAX in a D register creates
false forwarding hazards, so don't do that unless we're on a core which
specifically asks for it.
Patch by James Greenhalgh
Differential Revision: https://reviews.llvm.org/D75248
The new behavior matches GNU objdump. A pair of angle brackets makes tests slightly easier.
`.foo:` is not unique and thus cannot be used in a `CHECK-LABEL:` directive.
Without `-LABEL`, the CHECK line can match the `Disassembly of section`
line and causes the next `CHECK-NEXT:` to fail.
```
Disassembly of section .foo:
0000000000001634 .foo:
```
Bdragon: <> has metalinguistic connotation. it just "feels right"
Reviewed By: rupprecht
Differential Revision: https://reviews.llvm.org/D75713
This patch upstreams support for the ARM Armv8.1m cpu Cortex-M55.
In detail adding support for:
- mcpu option in clang
- Arm Target Features in clang
- llvm Arm TargetParser definitions
details of the CPU can be found here:
https://developer.arm.com/ip-products/processors/cortex-m/cortex-m55
Reviewers: chill
Reviewed By: chill
Subscribers: dmgreen, kristof.beyls, hiraditya, cfe-commits,
llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74966
The alias analysis in DAG Combine looks at the BaseAlign, the Offset and
the Size of two accesses, and determines if they are known to access
different parts of memory by the fact that they are different offsets
from inside that "alignment window". It does not seem to account for
accesses that are not a multiple of the size, and may overflow from one
alignment window into another.
For example in the test case we have a 19byte memset that is splits into
a 16 byte neon store and an unaligned 4 byte store with a 15 byte
offset. This 15byte offset (with a base align of 8) wraps around to the
next alignment windows. When compared to an access that is a 16byte
offset (of the same 4byte size and 8byte basealign), the two accesses
are said not to alias.
I've fixed this here by just ensuring that the offsets are a multiple of
the size, ensuring that they don't overlap by wrapping. Fixes PR45035,
which was exposed by the UseAA changes in the arm backend.
Differential Revision: https://reviews.llvm.org/D75238
Under fp16 we optimise the bitcast between a VMOVhr and a CopyToReg via
custom lowering. This rewrites that to be a DAG combine instead, which
helps produce better code in the cases where the bitcast is actaully
legal.
Differential Revision: https://reviews.llvm.org/D72753
This adds infrastructure to print and parse MIR MachineOperand comments.
The motivation for the ARM backend is to print condition code names instead of
magic constants that are difficult to read (for human beings). For example,
instead of this:
dead renamable $r2, $cpsr = tEOR killed renamable $r2, renamable $r1, 14, $noreg
t2Bcc %bb.4, 0, killed $cpsr
we now print this:
dead renamable $r2, $cpsr = tEOR killed renamable $r2, renamable $r1, 14 /* CC::always */, $noreg
t2Bcc %bb.4, 0 /* CC:eq */, killed $cpsr
This shows that MachineOperand comments are enclosed between /* and */. In this
example, the EOR instruction is not conditionally executed (i.e. it is "always
executed"), which is encoded by the 14 immediate machine operand. Thus, now
this machine operand has /* CC::always */ as a comment. The 0 on the next
conditional branch instruction represents the equal condition code, thus now
this operand has /* CC:eq */ as a comment.
As it is a comment, the MI lexer/parser completely ignores it. The benefit is
that this keeps the change in the lexer extremely minimal and no target
specific parsing needs to be done. The changes on the MIPrinter side are also
minimal, as there is only one target hooks that is used to create the machine
operand comments.
Differential Revision: https://reviews.llvm.org/D74306
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
mutateStrictFPToFP can delete the node and replace it with another with the same
value which can later cause problems, and returning the result of
mutateStrictFPToFP doesn't work because SelectionDAGLegalize expects that the
returned value has the same number of results as the original. Instead handle
things by doing the mutation manually.
Differential Revision: https://reviews.llvm.org/D74726
This reverts commit 80a34ae311 with fixes.
Previously, since bots turning on EXPENSIVE_CHECKS are essentially turning on
MachineVerifierPass by default on X86 and the fact that
inline-asm-avx-v-constraint-32bit.ll and inline-asm-avx512vl-v-constraint-32bit.ll
are not expected to generate functioning machine code, this would go
down to `report_fatal_error` in MachineVerifierPass. Here passing
`-verify-machineinstrs=0` to make the intent explicit.
This reverts commit 80a34ae311 with fixes.
On bots llvm-clang-x86_64-expensive-checks-ubuntu and
llvm-clang-x86_64-expensive-checks-debian only,
llc returns 0 for these two tests unexpectedly. I tweaked the RUN line a little
bit in the hope that LIT is the culprit since this change is not in the
codepath these tests are testing.
llvm\test\CodeGen\X86\inline-asm-avx-v-constraint-32bit.ll
llvm\test\CodeGen\X86\inline-asm-avx512vl-v-constraint-32bit.ll
If the target has FP64 but not FP16 then we have custom lowering for FP_EXTEND
and STRICT_FP_EXTEND with type f64. However if the extend is from f32 to f64 the
current implementation will cause in infinite loop for STRICT_FP_EXTEND due to
emitting a merge_values of the original node which after replacement becomes a
merge_values of itself.
Fix this by not doing anything for f32 to f64 extend when we have FP64, though
for STRICT_FP_EXTEND we have to do the strict-to-nonstrict mutation as that
doesn't happen automatically for opcodes with custom lowering.
Differential Revision: https://reviews.llvm.org/D74559
Simon pointed out that this function is doing a bitcast, which can be
incorrect for big endian. That makes the lowering of VMOVN in MVE
wrong, but the function is shared between Neon and MVE so both can
be incorrect.
This attempts to fix things by using the newly added VECTOR_REG_CAST
instead of the BITCAST. As it may now be used on Neon, I've added the
relevant patterns for it there too. I've also added a quick dag combine
for it to remove them where possible.
Differential Revision: https://reviews.llvm.org/D74485
Summary:
GNU objdump prints the file format in lowercase, e.g. `elf64-x86-64`. llvm-objdump prints `ELF64-x86-64` right now, even though piping that into llvm-objcopy refuses that as a valid arch to use.
As an example of a problem this causes, see: https://github.com/ClangBuiltLinux/linux/issues/779
Reviewers: MaskRay, jhenderson, alexshap
Reviewed By: MaskRay
Subscribers: tpimh, sbc100, grimar, jvesely, nhaehnle, kerbowa, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74433
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
This reverts commit rGcd5b308b828e, rGcd5b308b828e, rG8cedf0e2994c.
There are issues to be investigated for polly bots and bots turning on
EXPENSIVE_CHECKS.
Printing floating point number in decimal is inconvenient for humans.
Verbose asm output will print out floating point values in comments, it
helps.
But in lots of cases, users still need additional work to covert the
decimal back to hex or binary to check the bit patterns,
especially when there are small precision difference.
Hexadecimal form is one of the supported form in LLVM IR, and easier for
debugging.
This patch try to print all FP constant in hex form instead.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D73566
The type passed to lower was invalid, so I'm not sure how this was
even working before. The source and destination type also do not have
to match, so make sure to use the right ones.
This reverts commit ed29dbaafa.
I'm backing out D68945, which as the discussion for D73526 shows, doesn't
seem to handle the -O0 path through the codegen backend correctly. I'll
reland the patch when a fix is worked out, apologies for all the churn.
The two parent commits are part of this revert too.
Conflicts:
llvm/lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
llvm/test/DebugInfo/X86/dbg-addr-dse.ll
SelectionDAGBuilder conflict is due to a nearby change in e39e2b4a79
that's technically unrelated. dbg-addr-dse.ll conflicted because
41206b61e3 (legitimately) changes the order of two lines.
There are further modifications to dbg-value-func-arg.ll: it landed after
the patch being reverted, and I've converted indirection to be represented
by the isIndirect field rather than DW_OP_deref.
This test case was XFAIL'ed because the peepholer was missing an optimisation.
But the peepholer is now able to handle this case, so enable this test. I will
close the corresponding and very old PR11364.
Followup to D73135. If the target doesn't have hard float (default
for ARM), then we assert when trying to soften the result of vector
reduction intrinsics. This patch marks these for expansion as well.
(A bit odd to use vectors on a target without hard float ... but
that's where you end up if you expose target-independent vector types.)
Differential Revision: https://reviews.llvm.org/D73854
These can be lowered to code sequences using CMPFP and CMPFPE which then get
selected to VCMP and VCMPE. The implementation isn't fully correct, as the chain
operand isn't handled correctly, but resolving that looks like it would involve
changes around FPSCR-handling instructions and how the FPSCR is modelled.
The fp-intrinsics test was already testing some of this but as the entire test
was being XFAILed it wasn't noticed. Un-XFAIL the test and instead leave the
cases where we aren't generating the right instruction sequences as FIXME.
Differential Revision: https://reviews.llvm.org/D73194
This reverts commit e34801c8e6 and the followup due to multiple
problems.
I've tried to keep the tests and RDA parts where possible, as those
still seem useful.
fadd/fmul reductions without reassoc are lowered to
VECREDUCE_STRICT_FADD/FMUL nodes, which don't have legalization
support. Until that is in place, expand these intrinsics on
ARM and AArch64. Other targets always expand the vector reduction
intrinsics.
Additionally expand fmax/fmin reductions without nonan flag on
AArch64, as the backend asserts that the flag is present when
lowering VECREDUCE_FMIN/FMAX.
This fixes https://bugs.llvm.org/show_bug.cgi?id=44600.
Differential Revision: https://reviews.llvm.org/D73135
For `MC_GlobalAddress` operands referencing **certain** GlobalObjects,
we can lower them to STB_LOCAL aliases to avoid costs brought by
assembler/linker's conservative decisions about symbol interposition:
* An assembler conservatively assumes a global default visibility symbol interposable (ELF
semantics). So relocations in object files are needed even if the code generator assumed
the definition exact and non-interposable.
* The relocations can cause the creation of PLT entries on some targets for -shared links.
A linker conservatively assumes a global default visibility symbol interposable (if not
otherwise constrained by -Bsymbolic/--dynamic-list/VER_NDX_LOCAL/etc).
"certain" refers to GlobalObjects in the intersection of
`hasExactDefinition() and !isInterposable()`: `external`, `appending`, `internal`, `private`.
Local linkages (`internal` and `private`) cannot be interposed. `appending` is for very
few objects LLVM interpret specially. So the set just includes `external`.
This patch emits STB_LOCAL aliases (.Lfoo$local) for such GlobalObjects, so that targets can lower
MC_GlobalAddress operands to STB_LOCAL aliases if applicable.
We may extend the scope and include GlobalAlias in the future.
LLVM's existing -fno-semantic-interposition behaviors give us license to do such optimizations:
* Various optimizations (ipconstprop, inliner, sccp, sroa, etc) treat normal ExternalLinkage
GlobalObjects as non-interposable.
* Before D72197, MC resolved a PC-relative VK_None fixup to a non-local symbol at assembly time (no
outstanding relocation), if the target is defined in the same section. Put it simply, even if IR
optimizations failed to optimize and allowed interposition for the function call in
`void foo() {} void bar() { foo(); }`, the assembler would disallow it.
This patch sets up AsmPrinter infrastructure to make -fno-semantic-interposition more so.
With and without the patch, the object file output should be identical:
`.Lfoo$local` does not take a symbol table entry.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D73228
This intention is to move patchable-function before aarch64-branch-targets
(configured in AArch64PassConfig::addPreEmitPass) so that we emit BTI before NOPs
(see https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92424).
This also allows addPreEmitPass() passes to know the precise instruction sizes if they want.
Tried x86-64 Debug/Release builds of ccls with -fxray-instrument -fxray-instruction-threshold=1.
No output difference with this commit and the previous commit.
Summary:
This patch could be treated as a rebase of D33960. It also fixes PR35547.
A fix for `llvm/test/Other/close-stderr.ll` is proposed in D68164. Seems
the consensus is that the test is passing by chance and I'm not
sure how important it is for us. So it is removed like in D33960 for now.
The rest of the test fixes are just adding `--crash` flag to `not` tool.
** The reason it fixes PR35547 is
`exit` does cleanup including calling class destructor whereas `abort`
does not do any cleanup. In multithreading environment such as ThinLTO or JIT,
threads may share states which mostly are ManagedStatic<>. If faulting thread
tearing down a class when another thread is using it, there are chances of
memory corruption. This is bad 1. It will stop error reporting like pretty
stack printer; 2. The memory corruption is distracting and nondeterministic in
terms of error message, and corruption type (depending one the timing, it
could be double free, heap free after use, etc.).
Reviewers: rnk, chandlerc, zturner, sepavloff, MaskRay, espindola
Reviewed By: rnk, MaskRay
Subscribers: wuzish, jholewinski, qcolombet, dschuff, jyknight, emaste, sdardis, nemanjai, jvesely, nhaehnle, sbc100, arichardson, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, lenary, s.egerton, pzheng, cfe-commits, MaskRay, filcab, davide, MatzeB, mehdi_amini, hiraditya, steven_wu, dexonsmith, rupprecht, seiya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D67847
Summary:
This patch fixes pr23772 [ARM] r226200 can emit illegal thumb2 instruction: "sub sp, r12, #80".
The violation was that SUB and ADD (reg, immediate) instructions can only write to SP if the source register is also SP. So the above instructions was unpredictable.
To enforce that the instruction t2(ADD|SUB)ri does not write to SP we now enforce the destination register to be rGPR (That exclude PC and SP).
Different than the ARM specification, that defines one instruction that can read from SP, and one that can't, here we inserted one that can't write to SP, and other that can only write to SP as to reuse most of the hard-coded size optimizations.
When performing this change, it uncovered that emitting Thumb2 Reg plus Immediate could not emit all variants of ADD SP, SP #imm instructions before so it was refactored to be able to. (see test/CodeGen/Thumb2/mve-stacksplot.mir where we use a subw sp, sp, Imm12 variant )
It also uncovered a disassembly issue of adr.w instructions, that were only written as SUBW instructions (see llvm/test/MC/Disassembler/ARM/thumb2.txt).
Reviewers: eli.friedman, dmgreen, carwil, olista01, efriedma, andreadb
Reviewed By: efriedma
Subscribers: gbedwell, john.brawn, efriedma, ostannard, kristof.beyls, hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70680
Some target like arm/riscv with soft-float will have compiling crash when using -fno-unsafe-math-optimization option.
This patch will add the missing strict FP support to SoftenFloatRes_XINT_TO_FP.
Differential Revision: https://reviews.llvm.org/D72277
As detailed in https://blog.regehr.org/archives/1709 we don't make use of the known leading/trailing zeros for shifted values in cases where we don't know the shift amount value.
This patch adds support to SelectionDAG::ComputeKnownBits to use KnownBits::countMinTrailingZeros and countMinLeadingZeros to set the minimum guaranteed leading/trailing known zero bits.
Differential Revision: https://reviews.llvm.org/D72573
Summary:
Avoid using the `nocf_check` attribute with Control Flow Guard. Instead, use a
new `"guard_nocf"` function attribute to indicate that checks should not be
added on indirect calls within that function. Add support for
`__declspec(guard(nocf))` following the same syntax as MSVC.
Reviewers: rnk, dmajor, pcc, hans, aaron.ballman
Reviewed By: aaron.ballman
Subscribers: aaron.ballman, tomrittervg, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72167
Summary:
This patch fixes pr23772 [ARM] r226200 can emit illegal thumb2 instruction: "sub sp, r12, #80".
The violation was that SUB and ADD (reg, immediate) instructions can only write to SP if the source register is also SP. So the above instructions was unpredictable.
To enforce that the instruction t2(ADD|SUB)ri does not write to SP we now enforce the destination register to be rGPR (That exclude PC and SP).
Different than the ARM specification, that defines one instruction that can read from SP, and one that can't, here we inserted one that can't write to SP, and other that can only write to SP as to reuse most of the hard-coded size optimizations.
When performing this change, it uncovered that emitting Thumb2 Reg plus Immediate could not emit all variants of ADD SP, SP #imm instructions before so it was refactored to be able to. (see test/CodeGen/Thumb2/mve-stacksplot.mir where we use a subw sp, sp, Imm12 variant )
It also uncovered a disassembly issue of adr.w instructions, that were only written as SUBW instructions (see llvm/test/MC/Disassembler/ARM/thumb2.txt).
Reviewers: eli.friedman, dmgreen, carwil, olista01, efriedma
Reviewed By: efriedma
Subscribers: john.brawn, efriedma, ostannard, kristof.beyls, hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70680
Architecturally, it's allowed to have MVE-I without an FPU, thus
-mfpu=none should not disable MVE-I, or moves to/from FP-registers.
This patch removes `+/-fpregs` from features unconditionally added to
target feature list, depending on FPU and moves the logic to Clang
driver, where the negative form (`-fpregs`) is conditionally added to
the target features list for the cases of `-mfloat-abi=soft`, or
`-mfpu=none` without either `+mve` or `+mve.fp`. Only the negative
form is added by the driver, the positive one is derived from other
features in the backend.
Differential Revision: https://reviews.llvm.org/D71843
Adds a pass to the ARM backend that takes a v4i32
gather and transforms it into a call to MVE's
masked gather intrinsics.
Differential Revision: https://reviews.llvm.org/D71743
This is a recommit of D71330, but with a few things fixed and changed:
1) ReachingDefAnalysis: this was not running with optnone as it was checking
skipFunction(), which other analysis passes don't do. I guess this is a
copy-paste from a codegen pass.
2) VPTBlockPass: here I've added skipFunction(), because like most/all
optimisations, we don't want to run this with optnone.
This fixes the issues with the initial/previous commit: the VPTBlockPass was
running with optnone, but ReachingDefAnalysis wasn't, and so VPTBlockPass was
crashing querying ReachingDefAnalysis.
I've added test case mve-vpt-block-optnone.mir to check that we don't run
VPTBlock with optnone.
Differential Revision: https://reviews.llvm.org/D71470
Summary:
Instead of generating two i32 instructions for each load or store of a volatile
i64 value (two LDRs or STRs), now emit LDRD/STRD.
These improvements cover architectures implementing ARMv5TE or Thumb-2.
Reviewers: dmgreen, efriedma, john.brawn, nickdesaulniers
Reviewed By: efriedma, nickdesaulniers
Subscribers: nickdesaulniers, vvereschaka, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70072
We were previously unconditionally using the ARM::TRAP opcode, even
under Thumb. My understanding is that these are essentially the same
thing (they both result in a trap under Thumb), but the ARM::TRAP opcode
is marked as requiring IsARM, so it is more correct to use ARM::tTRAP.
Differential Revision: https://reviews.llvm.org/D72075
This adds extra scalar handling to isFMAFasterThanFMulAndFAdd, allowing
the target independent code to handle more folds in more situations (for
example if the fast math flags are present, but the global
AllowFPOpFusion option isnt). It also splits apart the HasSlowFPVMLx
into HasSlowFPVFMx, to allow VFMA and VMLA to be controlled separately
if needed.
Differential Revision: https://reviews.llvm.org/D72139
This patch attempts to peek through vectors based on the demanded bits/elt of a particular ISD::EXTRACT_VECTOR_ELT node, allowing us to avoid dependencies on ops that have no impact on the extract.
In particular this helps remove some unnecessary scalar->vector->scalar patterns.
The wasm shift patterns are annoying - @tlively has indicated that the wasm vector shift codegen are to be refactored in the near-term and isn't considered a major issue.
Reapplied after reversion at rL368660 due to PR42982 which was fixed at rGca7fdd41bda0.
Differential Revision: https://reviews.llvm.org/D65887
For now, we didn't set the default operation action for SIGN_EXTEND_INREG for
vector type, which is 0 by default, that is legal. However, most target didn't
have native instructions to support this opcode. It should be set as expand by
default, as what we did for ANY_EXTEND_VECTOR_INREG.
Differential Revision: https://reviews.llvm.org/D70000
Some of the instructions in these tests were technically invalid
combinations (using ARM opcodes in Thumb mode, for example). Update the
targets and the instructions used to be more correct.
This moves the X86 specific transform from rL364407
into DAGCombiner to generically handle 'little to big' cases
(for example: extract_subvector(v2i64 bitcast(v16i8))). This
allows us to remove both the x86 implementation and the aarch64
bitcast(extract_subvector(bitcast())) combine.
Earlier patches that dealt with regressions initially exposed
by this patch:
rG5e5e99c041e4
rG0b38af89e2c0
Patch by: @RKSimon (Simon Pilgrim)
Differential Revision: https://reviews.llvm.org/D63815
As the extern_weak target might be missing, resolving to the absolute
address zero, we can't use the normal direct PC-relative branch
instructions (as that would result in relocations out of range).
Instead check the shouldAssumeDSOLocal method and load the address
from a COFF stub.
This matches what was done for X86 in 6bf108d77a.
Differential Revision: https://reviews.llvm.org/D71720
Summary:
Instead of generating two i32 instructions for each load or store of a volatile
i64 value (two LDRs or STRs), now emit LDRD/STRD.
These improvements cover architectures implementing ARMv5TE or Thumb-2.
Reviewers: dmgreen, efriedma, john.brawn
Reviewed By: efriedma
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70072
This reverts commit 1f3dd83cc1, reapplying
commit bb1b0bc4e5.
The original commit failed on some builds seemingly due to the use of a
bracketed constructor with an std::array, i.e. `std::array<> arr({...})`.
Previously, LLVM had no functional way of performing casts inside of a
DIExpression(), which made salvaging cast instructions other than Noop
casts impossible. This patch enables the salvaging of casts by using the
DW_OP_LLVM_convert operator for SExt and Trunc instructions.
There is another issue which is exposed by this fix, in which fragment
DIExpressions (which are preserved more readily by this patch) for
values that must be split across registers in ISel trigger an assertion,
as the 'split' fragments extend beyond the bounds of the fragment
DIExpression causing an error. This patch also fixes this issue by
checking the fragment status of DIExpressions which are to be split, and
dropping fragments that are invalid.
The following intrinsics currently carry a rounding mode metadata argument:
llvm.experimental.constrained.minnum
llvm.experimental.constrained.maxnum
llvm.experimental.constrained.ceil
llvm.experimental.constrained.floor
llvm.experimental.constrained.round
llvm.experimental.constrained.trunc
This is not useful since the semantics of those intrinsics do not in any way
depend on the rounding mode. In similar cases, other constrained intrinsics
do not have the rounding mode argument. Remove it here as well.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D71218
The big switch in `ARMBaseInstrInfo::getNumMicroOps` is missing cases for
`VLLDM` and `VLSTM`, which are currently defined with itineraries having a
dynamic count of micro-ops.
Assuming an optimistic case in which these instruction do not actually perform
loads or stores, and with the idea that Armv8-m cores are supposed to use the
new style scheduling models, this patch just sets the itinerary for those two
instructions to `NoItinerary`.
Differential Revision: https://reviews.llvm.org/D71266
This reverts commit 9468e3334b.
There's a test that doesn't like this change. The RDA analysis
gets invalided by changes in the block, which is not taken into
account. Revert while I work on a fix for this.
This adds ReachingDefAnalysis (RDA) to the VPTBlock pass, so that we can
reimplement findVCMPToFoldIntoVPS with just a few calls to RDA.
Differential Revision: https://reviews.llvm.org/D71330
During SelectionDAG, if a value which is associated with a DBG_VALUE
needs to be split across multiple registers, the DBG_VALUE will be split
into a set of fragment expressions to recreate the original value.
If one or more of these fragments cannot be created, they would
previously be silently dropped, causing the old debug value to live past
its expiry date. This patch fixes this issue by keeping invalid
fragments while setting their value as Undef.
Differential revision: https://reviews.llvm.org/D70248
Summary:
This fixes PR44135.
The special case when we promote a bitcast from a vector to an int
needs special handling when we are on a big-endian target.
Prior to this fix, for the added vec_to_int we see the following in the
SelectionDAG printouts
Type-legalized selection DAG: %bb.1 'foo:bb.1'
SelectionDAG has 9 nodes:
t0: ch = EntryToken
t2: v8i16,ch = CopyFromReg t0, Register:v8i16 %0
t17: v4i32 = bitcast t2
t23: i32 = extract_vector_elt t17, Constant:i32<3>
t8: ch,glue = CopyToReg t0, Register:i32 $r0, t23
t9: ch = ARMISD::RET_FLAG t8, Register:i32 $r0, t8:1
and I think here the extract_vector_elt is wrong and extracts the value
from the wrong index.
The program program should return the 32 bits made up of the elements at
index 4 and 5 in the vec6 array, but with
t23: i32 = extract_vector_elt t17, Constant:i32<3>
as far as I can tell, we will extract values that originally didn't even
exist in the vec6 vectore.
If we would instead extract the element at index 2 we would get the wanted
values.
With this fix we insert a right shift after the bitcast in
DAGTypeLegalizer::PromoteIntRes_BITCAST which then gives us
Type-legalized selection DAG: %bb.1 'vec_to_int:bb.1'
SelectionDAG has 9 nodes:
t0: ch = EntryToken
t2: v8i16,ch = CopyFromReg t0, Register:v8i16 %0
t23: v4i32 = bitcast t2
t27: i32 = extract_vector_elt t23, Constant:i32<2>
t8: ch,glue = CopyToReg t0, Register:i32 $r0, t27
t9: ch = ARMISD::RET_FLAG t8, Register:i32 $r0, t8:1
So now we get
t27: i32 = extract_vector_elt t23, Constant:i32<2>
which is what we want.
Similarly, the new int_to_vec testcase exposes a bug where we cast the other
direction. Then we instead need to add a left shift before the bitcast on
big-endian targets for the bits in the input integer to end up at the exptected
place in the vector.
Reviewers: bogner, spatel, craig.topper, t.p.northover, dmgreen, efriedma, SjoerdMeijer, samparker
Reviewed By: efriedma
Subscribers: eli.friedman, bjope, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70942
Summary:
Split off of D67120.
Add the profile guided size optimization instrumentation / queries in the code
gen or target passes. This doesn't enable the size optimizations in those passes
yet as they are currently disabled in shouldOptimizeForSize (for non-IR pass
queries).
A second try after reverted D71072.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71149
Summary:
Split off of D67120.
Add the profile guided size optimization instrumentation / queries in the code
gen or target passes. This doesn't enable the size optimizations in those passes
yet as they are currently disabled in shouldOptimizeForSize (for non-IR pass
queries).
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71072
https://reviews.llvm.org/D70922
This adds a hook to allow targets to define exactly what extension
operation should be performed for widening constants. This handles cases
like widening i1 true which would end up becoming -1 which affects code
quality during combines.
Additionally, in order to stay consistent with how DAG is promoting
constants, we now signextend for byte sized types and zero extend
otherwise (by default). Targets can of course override this if
necessary.
Convert ARMCodeGenPrepare into a generic type promotion pass by:
- Removing the insertion of arm specific intrinsics to handle narrow
types as we weren't using this.
- Removing ARMSubtarget references.
- Now query a generic TLI object to know which types should be
promoted and what they should be promoted to.
- Move all codegen tests into Transforms folder and testing using opt
and not llc, which is how they should have been written in the
first place...
The pass searches up from icmp operands in an attempt to safely
promote types so we can avoid generating unnecessary unsigned extends
during DAG ISel.
Differential Revision: https://reviews.llvm.org/D69556
Summary:
Add support for vcadd_* family of intrinsics. This set of intrinsics is
available in Armv8.3-A.
The fp16 versions require the FP16 extension, which has been available
(opt-in) since Armv8.2-A.
Reviewers: t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D70862
Summary:
In the cases where the CMOV (f16) SDNode is used with condition codes
LT, LE, VC or NE, it is successfully selected into a VSEL instruction.
In the remaining cases, however, instruction selection fails since VSEL
does not support other condition codes.
This patch handles such cases by using the single-precision version of
the VMOV instruction.
Reviewers: ostannard, dmgreen
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70667
This replaces the A32 NEON vqadds, vqaddu, vqsubs and vqsubu intrinsics
with the target independent sadd_sat, uadd_sat, ssub_sat and usub_sat.
This helps generate vqadds from standard IR nodes, which might be
produced from the vectoriser. The old variants are removed in the
process.
Differential Revision: https://reviews.llvm.org/D69350
Add several new methods to ReachingDefAnalysis:
- getReachingMIDef, instead of returning an integer, return the
MachineInstr that produces the def.
- getInstFromId, return a MachineInstr for which the given integer
corresponds to.
- hasSameReachingDef, return whether two MachineInstr use the same
def of a register.
- isRegUsedAfter, return whether a register is used after a given
MachineInstr.
These methods have been used in ARMLowOverhead to replace searching
for uses/defs.
Differential Revision: https://reviews.llvm.org/D70009
This patch adds instruction selection patterns for the TT, TTT, TTA, and TTAT
instructions and tests for llvm.arm.cmse.tt, llvm.arm.cmse.ttt,
llvm.arm.cmse.tta, and llvm.arm.cmse.ttat intrinsics (added in a previous
patch).
Patch by Javed Absar.
Differential Revision: https://reviews.llvm.org/D70407
Reid Kleckner