If a base pointer load is preloaded, we have change the base pointer of
the derived SAI. However, as the derived SAI relationship is is
coarse grained, we need to check if we actually preloaded the base
pointer or a different element of the base pointer SAI array.
llvm-svn: 251881
Sorting is replaced by a demand driven code generation that will pre-load a
value when it is needed or, if it was not needed before, at some point
determined by the order of invariant accesses in the program. Only in very
little cases this demand driven pre-loading will kick in, though it will
prevent us from generating faulty code. An example where it is needed is
shown in:
test/ScopInfo/invariant_loads_complicated_dependences.ll
Invariant loads that appear in parameters but are not on the top-level (e.g.,
the parameter is not a SCEVUnknown) will now be treated correctly.
Differential Revision: http://reviews.llvm.org/D13831
llvm-svn: 250655
If a (assumed) invariant location is loaded multiple times we
generated a parameter for each location. However, this caused compile
time problems for several benchmarks (e.g., 445_gobmk in SPEC2006 and
BT in the NAS benchmarks). Additionally, the code we generate is
suboptimal as we preload the same location multiple times and perform
the same checks on all the parameters that refere to the same value.
With this patch we consolidate the invariant loads in three steps:
1) During SCoP initialization required invariant loads are put in
equivalence classes based on their pointer operand. One
representing load is used to generate a parameter for the whole
class, thus we never generate multiple parameters for the same
location.
2) During the SCoP simplification we remove invariant memory
accesses that are in the same equivalence class. While doing so
we build the union of all execution domains as it is only
important that the location is at least accessed once.
3) During code generation we only preload one element of each
equivalence class with the unified execution domain. All others
are mapped to that preloaded value.
Differential Revision: http://reviews.llvm.org/D13338
llvm-svn: 249853
This patch allows invariant loads to be used in the SCoP description,
e.g., as loop bounds, conditions or in memory access functions.
First we collect "required invariant loads" during SCoP detection that
would otherwise make an expression we care about non-affine. To this
end a new level of abstraction was introduced before
SCEVValidator::isAffineExpr() namely ScopDetection::isAffine() and
ScopDetection::onlyValidRequiredInvariantLoads(). Here we can decide
if we want a load inside the region to be optimistically assumed
invariant or not. If we do, it will be marked as required and in the
SCoP generation we bail if it is actually not invariant. If we don't
it will be a non-affine expression as before. At the moment we
optimistically assume all "hoistable" (namely non-loop-carried) loads
to be invariant. This causes us to expand some SCoPs and dismiss them
later but it also allows us to detect a lot we would dismiss directly
if we would ask e.g., AliasAnalysis::canBasicBlockModify(). We also
allow potential aliases between optimistically assumed invariant loads
and other pointers as our runtime alias checks are sound in case the
loads are actually invariant. Together with the invariant checks this
combination allows to handle a lot more than LICM can.
The code generation of the invariant loads had to be extended as we
can now have dependences between parameters and invariant (hoisted)
loads as well as the other way around, e.g.,
test/Isl/CodeGen/invariant_load_parameters_cyclic_dependence.ll
First, it is important to note that we cannot have real cycles but
only dependences from a hoisted load to a parameter and from another
parameter to that hoisted load (and so on). To handle such cases we
materialize llvm::Values for parameters that are referred by a hoisted
load on demand and then materialize the remaining parameters. Second,
there are new kinds of dependences between hoisted loads caused by the
constraints on their execution. If a hoisted load is conditionally
executed it might depend on the value of another hoisted load. To deal
with such situations we sort them already in the ScopInfo such that
they can be generated in the order they are listed in the
Scop::InvariantAccesses list (see compareInvariantAccesses). The
dependences between hoisted loads caused by indirect accesses are
handled the same way as before.
llvm-svn: 249607
Value maps are created and used in many places and it is not always
possible to include CodeGen/Blockgenerators.h. To this end, ValueMapT
now lives in the ScopHelper.h which does not have any dependences itself.
This patch also replaces uses of different other value map types with
the ValueMapT.
llvm-svn: 249606
There have been various places where llvm::DenseMap<const llvm::Value *,
llvm::Value *> types have been defined, but all types have been expected to be
identical. We make this more clear by consolidating the different types and use
BlockGenerator::ValueMapT wherever there is a need for types to match
BlockGenerator::ValueMapT.
llvm-svn: 249264
If a value is globally mapped (IslNodeBuilder::ValueMap) and
referenced in the code that will be put into a subfunction, we hand
down the new value to the subfunction.
This patch also removes code that handed down all invariant loads to
the subfunction. Instead, only needed invariant loads are given to the
subfunction. There are two possible reasons for an invariant load to
be handed down:
1) The invariant load is used in a block that is placed in the
subfunction but which is not the parent of the load. In this
case, the scalar access that will read the loaded value, will
cause its base pointer (the preloaded value) to be handed down to
the subfunction.
2) The invariant load is defined and used in a block that is placed
in the subfunction. With this patch we will hand down the
preloaded value to the subfunction as the invariant load is
globally mapped to that value.
llvm-svn: 249126
Before we unconditinoally forced all users outside the SCoP to use
the preloaded value. However, if the SCoP is not executed due to the
runtime checks, we need to use the original value because it might not
be invariant in the first place.
llvm-svn: 248881
As a first step in the direction of assumed invariant loads (loads
that are not written in some context) we now detect and hoist
definitively invariant loads. These invariant loads will be preloaded
in the code generation and used in the optimized version of the SCoP.
If the load is only conditionally executed the preloaded version will
also only be executed under the same condition, hence we will never
access memory that wouldn't have been accessed otherwise. This is also
the most distinguishing feature to licm.
As hoisting can make statements empty we will simplify the SCoP and
remove empty statements that would otherwise cause artifacts in the
code generation.
Differential Revision: http://reviews.llvm.org/D13194
llvm-svn: 248861
This commit basically reverts r246427 but still solves the issue
tackled by that commit. Instead of emitting initialization code in the
beginning of the start block we now generate parallel code in its own
block and thereby guarantee separation. This is necessary as we cannot
generate code for hoisted loads prior to the start block but it still
needs to be placed prior to everything else.
llvm-svn: 248674
There are three possible reasons to add a memory memory access: For explicit load and stores, for llvm::Value defs/uses, and to emulate PHI nodes (the latter two called implicit accesses). Previously MemoryAccess only stored IsPHI. Register accesses could be identified through the isScalar() method if it was no IsPHI. isScalar() determined the number of dimensions of the underlaying array, scalars represented by zero dimensions.
For the work on de-LICM, implicit accesses can have more than zero dimensions, making the distinction of isScalars() useless, hence now stored explicitly in the MemoryAccess. Instead, we replace it by isImplicit() and avoid the term scalar for zero-dimensional arrays as it might be confused with llvm::Value which are also often referred to as scalars (or alternatively, as registers).
No behavioral change intended, under the condition that it was impossible to create explicit accesses to zero-dimensional "arrays".
llvm-svn: 248616
This prepares for a series of patches that merges TempScopInfo into ScopInfo to
reduce Polly's code complexity. Only ScopInfo.{cpp|h} will be left thereafter.
Moving the code of TempScopInfo in one commit makes the mains diffs simpler to
understand.
In detail, merging the following classes is planned:
TempScopInfo into ScopInfo
TempScop into Scop
IRAccess into MemoryAccess
Only moving code, no functional changes intended.
Differential Version: http://reviews.llvm.org/D12693
llvm-svn: 247274
Not all users of our IslNodeBuilder will attach scheduling information to the
AST in the same way IslAstInfo is doing it today. By going through a virtual
function when extracting the schedule of an AST node other users can provide
their own functions for extract scheduling information in case they attach
scheduling information in a different way to the AST nodes.
No functional change for Polly itself intended.
llvm-svn: 247126
Some of the structures are renamed, subfunction introduced to clarify the
individual steps and comments are added describing their functionality.
llvm-svn: 246929
In the common case, the access functions are not modified, hence there is no
need to obtain the IslAstBuild context at all. This should not only be minimally
faster, but this also allows the IslNodeBuilder to work on asts that are not
annotated with isl_ast_builds as long as the memory accesses are not modified.
llvm-svn: 246928
The GlobalMap variable used in BlockGenerator should always reference the same
list througout the entire code generation, hence we can make it a member
variable to avoid passing it around through every function call.
History: Before we switched to the SCEV based code generation the GlobalMap
also contained a mapping form old to new induction variables, hence it was
different for each ScopStmt, which is why we passed it as function argument
to copyStmt. The new SCEV based code generation now uses a separate mapping
called LTS -> LoopToSCEV that maps each original loop to a new loop iteration
variable provided as a SCEVExpr. The GlobalMap is currently mostly used for
OpenMP code generation, where references to parameters in the original function
need to be rewritten to the locations of these variables after they have been
passed to the subfunction.
Suggested-by: Johannes Doerfert <doerfert@cs.uni-saarland.de>
llvm-svn: 246920
Scalar dependences between scop statements have caused troubles during parallel
code generation as we did not pass on the new stack allocation created for such
scalars to the parallel subfunctions. This change now detects all scalar
reads/writes in parallel subfunctions, creates the allocas for these scalar
objects, passes the resulting memory locations to the subfunctions and ensures
that within the subfunction requests for these memory locations will return the
rewritten values.
Johannes suggested as a future optimization to privatizing some of the scalars
in the subfunction.
llvm-svn: 246414
This change allows the BlockGenerator to be reused in contexts where we want to
provide different/modified isl_ast_expressions, which are not only changed to
a different access relation than the original statement, but which may indeed
be different for each code-generated instance of the statement.
We ensure testing of this feature by moving Polly's support to import changed
access functions through a jscop file to use the BlockGenerators support for
generating arbitary access functions if provided.
This commit should not change the behavior of Polly for now. The diff is rather
large, but most changes are due to us passing the NewAccesses hash table through
functions. This style, even though rather verbose, matches what is done
throughout the BlockGenerator with other per-statement properties.
llvm-svn: 246144
To make alias scope metadata generation work in OpenMP mode we now provide
the ScopAnnotator with information about the base pointer rewrite that happens
when passing arrays into the OpenMP subfunction.
llvm-svn: 245451
The SCEVExpander cannot deal with all SCEVs Polly allows in all kinds
of expressions. To this end we introduce a ScopExpander that handles
the additional expressions separatly and falls back to the
SCEVExpander for everything else.
Reviewers: grosser, Meinersbur
Subscribers: #polly
Differential Revision: http://reviews.llvm.org/D12066
llvm-svn: 245288
Instead of flat schedules, we now use so-called schedule trees to represent the
execution order of the statements in a SCoP. Schedule trees make it a lot easier
to analyze, understand and modify properties of a schedule, as specific nodes
in the tree can be choosen and possibly replaced.
This patch does not yet fully move our DependenceInfo pass to schedule trees,
as some additional performance analysis is needed here. (In general schedule
trees should be faster in compile-time, as the more structured representation
is generally easier to analyze and work with). We also can not yet perform the
reduction analysis on schedule trees.
For more information regarding schedule trees, please see Section 6 of
https://lirias.kuleuven.be/handle/123456789/497238
llvm-svn: 242130
Upcoming revisions of isl require us to include header files explicitly, which
have previously been already transitively included. Before we add them, we sort
the existing includes.
Thanks to Chandler for sort_includes.py. A simple, but very convenient script.
llvm-svn: 236930
Johannes Doerfert