the extra check introduces 22 new test failures with the LLDB clang buildbot.
Note that the unhandled DWARF_OP codes in DWARFExpression::Evaluate don't cause test failures if the check is ignored.
llvm-svn: 187480
list have a shared pointer back to their DisassemblerLLVMC. This checkin force clears the InstructionList
in all the places we use the DisassemblerSP to stop the leaking for now. I'll go back and fix this
for real when I have time to do so.
<rdar://problem/14581918>
llvm-svn: 187473
in LLDB that load the canonical frame address rather than a location list.
- Handles the simple case where a CFA can be pulled from the current stack frame.
- Fixes more than one hundred failing tests with gcc 4.8!
TODO: Use UnwindPlan::GetRowForFunctionOffset if the DWARFExpression needs
to be evaluated in a context analogous to a virtual unwind (perhaps using RegisterContextLLDB).
- Also adds some comments to DWARFCallFrameInfo whenever I got confused.
llvm-svn: 187361
If we are replacing a function with the nobuiltin attribute, it may be called
with the builtin attribute on call sites. Remove any such attributes since it's
illegal to have a builtin call to something other than a nobuiltin function.
This fixes the current buildbot breakage (where LLDB crashes on
"expression new foo(42)").
llvm-svn: 186990
delete a constant after we replaced it with a
dynamically-computed value. Also ensured that we
replace all users of the constant if there are
multiple ones. Added a testcase.
<rdar://problem/14379043>
llvm-svn: 186363
write to registers if they were modified in the
expression. This eliminates spurious errors if
the register can't be written to but the
expression didn't write to it anyway.
Also improved error handling for the materializer
to make "couldn't materialize struct" errors more
informative.
<rdar://problem/14322579>
llvm-svn: 186228
A long time ago we start with clang types that were created by the symbol files and there were many functions in lldb_private::ClangASTContext that helped. Later we create ClangASTType which contains a clang::ASTContext and an opauque QualType, but we didn't switch over to fully using it. There were a lot of places where we would pass around a raw clang_type_t and also pass along a clang::ASTContext separately. This left room for error.
This checkin change all type code over to use ClangASTType everywhere and I cleaned up the interfaces quite a bit. Any code that was in ClangASTContext that was type related, was moved over into ClangASTType. All code that used these types was switched over to use all of the new goodness.
llvm-svn: 186130
- ObjectFile::GetSymtab() and ObjectFile::ClearSymtab() no longer takes any flags
- Module coordinates with the object files and contain a unified section list so that object file and symbol file can share sections when they need to, yet contain their own sections.
Other cleanups:
- Fixed Symbol::GetByteSize() to not have the symbol table compute the byte sizes on the fly
- Modified the ObjectFileMachO class to compute symbol sizes all at once efficiently
- Modified the Symtab class to store a file address lookup table for more efficient lookups
- Removed Section::Finalize() and SectionList::Finalize() as they did nothing
- Improved performance of the detection of symbol files that have debug maps by excluding stripped files and core files, debug files, object files and stubs
- Added the ability to tell if an ObjectFile has been stripped with ObjectFile::IsStripped() (used this for the above performance improvement)
llvm-svn: 185990
been suitable for preparing a single IR function
for operation in the target. However, using blocks
and lambdas creates other IR functions that also
need to be processed.
I have audited IRForTarget to make it process
multiple functions. Where IRForTarget would add
new instructions at the beginning of the main
expression function, it now adds them on-demand
in the function where they are needed. This is
enabled by a system of FunctionValueCaches, which
invoke a lambda to create or derive the values as
needed, or report the result of that lambda if it
has already been called for the given function.
<rdar://problem/14180236>
llvm-svn: 185224
has more than one function with a body. This
prevents declarations e.g. of blocks from being
passed to the IRInterpreter; they must pass
through to the JIT.
<rdar://problem/14180236>
llvm-svn: 185057
correctly. We have been getting lucky since most
expressions generate only one section (or the first
code section contains all the code), but sometimes
it actually matters.
<rdar://problem/14180236>
llvm-svn: 185054
bother checking if a region is safe to use. In
cases where regions need to be synthesized rather
than properly allocated, the memory reads required
to determine whether the area is used are
- insufficient, because intermediate locations
could be in use, and
- unsafe, because on some platforms reading from
memory can trigger events.
All this only makes a difference on platforms
where memory allocation in the target is impossible.
Behavior on platforms where it is possible should
stay the same.
<rdar://problem/14023970>
llvm-svn: 185046
dematerialization of registers that caused
conditional breakpoint expressions not to
work properly. Also added a testcase.
<rdar://problem/14129252>
llvm-svn: 184451
- Implemented the SExt instruction, and
- eliminated redundant codepaths for constant
handling.
Added test cases.
<rdar://problem/13244258>
<rdar://problem/13955820>
llvm-svn: 183344
live as long as they needed to. This led to
equality tests involving persistent variables
often failing or succeeding when they had no
business doing so.
To do this, I introduced the ability for a
memory allocation to "leak" - that is, to
persist in the process beyond the lifetime of
the expression. Hand-declared persistent
variables do this now.
<rdar://problem/13956311>
llvm-svn: 182528
Show variables that were in the debug info but optimized out. Also display a good error message when one of these variables get used in an expression.
llvm-svn: 182066
regions that aren't actually allocated in the
process. This cache is used by the expression
parser if the underlying process doesn't support
memory allocation, to avoid needless repeated
searches for unused address ranges.
Also fixed a silly bug in IRMemoryMap where it
would continue searching even after it found a
valid region.
<rdar://problem/13866629>
llvm-svn: 182028
to the DeclContext. This fulfils the contract that
we make with Clang by returning ELR_AlreadyLoaded.
This is a little aggressive in that it does not allow
the ASTImporter to import the child decls with any
lexical parent other than the Decl that reported them
as children.
<rdar://problem/13517713>
llvm-svn: 181498
support operands with vector types, it now reports
that it cannot interpret expressions that use
vector types. They get sent to the JIT instead.
<rdar://problem/13733651>
llvm-svn: 180899
mostly related to management of the stack frame
for the interpreter.
- First, if the expression can be interpreted,
allocate the stack frame in the target process
(to make sure pointers are valid) but only
read/write to the copy in the host's memory.
- Second, keep the memory allocations for the
stack frame and the materialized struct as
member variables of ClangUserExpression. This
avoids memory allocations and deallocations
each time the expression runs.
<rdar://problem/13043685>
llvm-svn: 180664
interpreter. They are a legacy from when the IR
interpreter didn't work with materialized values
but rather got values directly from
ClangExpressionDeclMap.
Also updated the #includes for IRInterpreter
accordingly.
llvm-svn: 180565
not find multiple functions with the same name but
different types. Now we keep track of what types
we've already reported for a function and only elide
functions if we've already reported a conflicting
one.
Also added a test case.
<rdar://problem/11367837>
llvm-svn: 180167
and persistent variables so that they are not
treated as remaining in the target process (i.e.,
having live data) when the process does not allow
persistent allocations (e.g., when there is no
process or in the case of kernel core files).
llvm-svn: 179919
variables in the ValueObject code:
- Report an error if the variable does not have
a valid address.
- Return the contents of the data to GetData(),
even if the value is constant.
<rdar://problem/13690855>
llvm-svn: 179876
Previously, the options for a breakopint or its
locations stored only the text of the breakpoint
condition (ironically, they used ClangUserExpression
as a glorified std::string) and, each time the condition
had to be evaluated in the StopInfo code, the expression
parser would be invoked via a static method to parse and
then execute the expression.
I made several changes here:
- Each breakpoint location now has its own
ClangUserExpressionSP containing a version of
the breakpoint expression compiled for that exact
location.
- Whenever the breakpoint is hit, the breakpoint
condition expression is simply re-run to determine
whether to stop.
- If the process changes (e.g., it's re-run) or
the source code of the expression changes (we use
a hash so as to avoid doing string comparisons)
the ClangUserExpressionSP is re-generated.
This should improve performance of breakpoint
conditions significantly, and takes advantage of
the recent expression re-use work.
llvm-svn: 179838
and made attempts to allocate memory in the process
fall back to FindSpace and just allocate memory on
the host (but with real-looking pointers, hence
FindSpace) if the process doesn't allow allocation.
This allows expressions to run on processes that don't
support allocation, like core files.
This introduces an extremely rare potential problem:
If all of the following are true:
- The Process doesn't support allocation;
- the user writes an expression that refers to an
address that does not yet map to anything, or is
dynamically generated (e.g., the result of calling
a function); and
- the randomly-selected address for the static data
for that specific expression runs into the
address the user was expecting to work with;
then dereferencing the pointer later results
in the user seeing something unexpected. This is
unlikely but possible; as a future piece of work,
we should have processes be able to hint to the
expression parser where it can allocate temporary data
of this kind.
llvm-svn: 179827
expressions.
Previously, ClangUserExpression assumed that if
there was a constant result for an expression
then it could be determined during parsing. In
particular, the IRInterpreter ran while parser
state (in particular, ClangExpressionDeclMap)
was present. This approach is flawed, because
the IRInterpreter actually is capable of using
external variables, and hence the result might
be different each run. Until now, we papered
over this flaw by re-parsing the expression each
time we ran it.
I have rewritten the IRInterpreter to be
completely independent of the ClangExpressionDeclMap.
Instead of special-casing external variable lookup,
which ties the IRInterpreter closely to LLDB,
we now interpret the exact same IR that the JIT
would see. This IR assumes that materialization
has occurred; hence the recent implementation of the
Materializer, which does not require parser state
(in the form of ClangExpressionDeclMap) to be
present.
Materialization, interpretation, and dematerialization
are now all independent of parsing. This means that
in theory we can parse expressions once and run them
many times. I have three outstanding tasks before
shutting this down:
- First, I will ensure that all of this works with
core files. Core files have a Process but do not
allow allocating memory, which currently confuses
materialization.
- Second, I will make expression breakpoint
conditions remember their ClangUserExpression and
re-use it.
- Third, I will tear out all the redundant code
(for example, materialization logic in
ClangExpressionDeclMap) that is no longer used.
While implementing this fix, I also found a bug in
IRForTarget's handling of floating-point constants.
This should be fixed.
llvm-svn: 179801
will be gone soon!) that lets it interpret a function
using just an llvm::Module, an llvm::Function, and a
MemoryMap.
Also added an API to IRExecutionUnit to get at its
llvm::Function, so that the IRInterpreter can work
with it.
llvm-svn: 179704
a ClangExpressionDeclMap. Any functions that
require value resolution etc. fail if the
ClangExpressionDeclMap isn't present - which is
exactly what is desired.
llvm-svn: 179695
IRMemoryMap rather than through its own memory
abstraction. This considerably simplifies the
code, and makes it possible to run the
IRInterpreter multiple times on an already-parsed
expression in the absence of a ClangExpressionDeclMap.
Changes include:
- ClangExpressionDeclMap's interface methods
for the IRInterpreter now take IRMemoryMap
arguments. They are not long for this world,
however, since the IRInterpreter will soon be
working with materialized variables.
- As mentioned above, removed the Memory class
from the IR interpreter altogether. It had a
few functions that remain useful, such as
keeping track of Values that have been placed
in memory, so I moved those into methods on
InterpreterStackFrame.
- Changed IRInterpreter to work with lldb::addr_t
rather than Memory::Region as its primary
currency.
- Fixed a bug in the IRMemoryMap where it did not
report correct address byte size and byte order
if no process was present, because it was using
Target::GetDefaultArchitecture() rather than
Target::GetArchitecture().
- Made IRMemoryMap methods clear the Errors they
receive before running. Having to do this by
hand is just annoying.
The testsuite seems happy with these changes, but
please let me know if you see problems (especially
in use cases without a process).
llvm-svn: 179675
Materializer for all expressions that need to
run in the target. This includes the following
changes:
- Removed a bunch of (de-)materialization code
from ClangExpressionDeclMap and assumed the
presence of a Materializer where we previously
had a fallback.
- Ensured that an IRMemoryMap is passed into
ClangExpressionDeclMap::Materialize().
- Fixed object ownership on LLVMContext; it is
now owned by the IRExecutionUnit, since the
Module and the ExecutionEngine both depend on
its existence.
- Fixed a few bugs in IRMemoryMap and the
Materializer that showed up during testing.
llvm-svn: 179649
- If an allocation is mirrored between the host
and the process, update the host's version
before returning a DataExtractor pointing to
it.
- If anyone attempts to access memory in a
process/target that does not have a corresponding
allocation, try accessing the memory directly
before erroring out.
llvm-svn: 179561
for variables in the new Materializer. This is
much easier now that the ValueObject API is solid.
I still have to implement reading bytes into a
ValueObject, but committing what I have so far.
This code is not yet used, so there will be fixes
when I switch the expression parser over to use the
new Materializer.
llvm-svn: 179416
to the Materializer. Materialization is still done by
the ClangExpressionDeclMap; this will be the next thing
to move.
Also fixed a layout bug that this uncovered.
llvm-svn: 179318
information about each variable that needs to
be materialized for an expression to work. The
next step is to migrate all materialization code
from ClangExpressionDeclMap to Materializer, and
to use it for variable materialization.
llvm-svn: 179245
from IRExecutionUnit into a superclass called
IRMemoryMap. IRMemoryMap handles all reading and
writing, ensuring that areas are kept track of and
memory is properly cached (and deleted).
Also fixed several cases where we would simply leak
binary data in the target process over time. Now
the expression objects explicitly own their
IRExecutionUnit and delete it when they go away. This
is why I had to modify ClangUserExpression,
ClangUtilityFunction, and ClangFunction.
As a side effect of this, I am removing the JIT
mutex for an IRMemoryMap. If it turns out that we
need this mutex, I'll add it in then, but right now
it's just adding complexity.
This is part of a more general project to make
expressions fully reusable. The next step is to
make materialization and dematerialization use
the IRMemoryMap API rather than writing and
reading directly from the process's memory.
This will allow the IR interpreter to use the
same data, but in the host's memory, without having
to use a different set of pointers.
llvm-svn: 178832
Symbol table function names should support lookups like symbols with debug info.
To fix this I:
- Gutted the way FindFunctions is used, there used to be way too much smarts only in the DWARF plug-in
- Made it more efficient by chopping the name up once and using simpler queries so that SymbolFile and Symtab plug-ins don't need to do as much
- Filter the results at a higher level
- Make the lldb_private::Symtab able to chop up C++ mangled names and make as much sense out of them as possible and also be able to search by basename, fullname, method name, and selector name.
llvm-svn: 178608
Note: although it is now possible to declare blocks
and call them inside the same expression, we do not
generate correct block descriptors so these blocks
cannot be passed to functions like dispatch_async.
<rdar://problem/12578656>
llvm-svn: 178509
PC relative loads are missing disassembly comments when disassembled in a live process.
This issue was because some sections, like __TEXT and __DATA in libobjc.A.dylib, were being moved when they were put into the dyld shared cache. This could also affect any other system that slides sections individually.
The solution is to keep track of wether the bytes we will disassemble are from an executable file (file address), or from a live process (load address). We now do the right thing based off of this input in all cases.
llvm-svn: 178315
LLDB is crashing when logging is enabled from lldb-perf-clang. This has to do with the global destructor chain as the process and its threads are being torn down.
All logging channels now make one and only one instance that is kept in a global pointer which is never freed. This guarantees that logging can correctly continue as the process tears itself down.
llvm-svn: 178191
Ashok Thirumurthi