Summary:
In C++, the behavior of casting a double value that is beyond the range
of a single precision floating-point to a float value is undefined. This
change replaces such a cast with APFloat::convert to convert the value,
which is consistent with how we convert a double value to a half value.
Reviewers: sanjoy
Subscribers: lebedev.ri, sanjoy, jlebar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59500
llvm-svn: 356781
In all the other clang-foo tools, the main library file is called
Foo.cpp and the file in the tool/ folder is called ClangFoo.cpp.
Do this for clang-move too.
No intended behavior change.
Differential Revision: https://reviews.llvm.org/D59700
llvm-svn: 356780
This reverts commit r356682 because it breaks the DWO flavours of some
tests:
lldb-Suite :: lang/c/const_variables/TestConstVariables.py
lldb-Suite :: lang/c/local_variables/TestLocalVariables.py
lldb-Suite :: lang/c/vla/TestVLA.py
llvm-svn: 356773
This helps to avoid the situation where RA spots that only 3 of the
v4f32 result of a load are used, and immediately reallocates the 4th
register for something else, requiring a stall waiting for the load.
Differential Revision: https://reviews.llvm.org/D58906
Change-Id: I947661edfd5715f62361a02b100f14aeeada29aa
llvm-svn: 356768
Summary:
Currently, llvm-readobj can dump symbol version sections only in LLVM style. In this patch, I would like to separate these dumpers into GNU style and
LLVM style for future implementation.
Reviewers: grimar, jhenderson, mattd, rupprecht
Reviewed By: rupprecht
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59186
llvm-svn: 356764
dynamic_allocators.
According to the OpenMP 5.0, 2.11.3 allocate Directive, Restrictions,
allocate directives that appear in a target region must specify an
allocator clause unless a requires directive with the dynamic_allocators
clause is present in the same compilation unit. Patch adds a check for a
presence of the requires directive with the dynamic_allocators clause.
llvm-svn: 356758
Some image ops return three or five dwords. Previously, we modeled that
with a 4 or 8 dword register class. The register allocator could
cleverly spot that some subregs were dead and allocate something else
there, but that caused the de-optimization that waitcnt insertion would
think that the result was used immediately.
This commit allows such an image op to have a result with a three or
five dword result, avoiding the above de-optimization.
Differential Revision: https://reviews.llvm.org/D58905
Change-Id: I3651211bbd7ed22721ee7b9fefd7bcc60a809d8b
llvm-svn: 356757
Rename the Preprocessor field to fix the
declaration of ‘std::unique_ptr<clang::Preprocessor> clang::tooling::ExpandModularHeadersPPCallbacks::Preprocessor’ changes the meaning of ‘Preprocessor’ from ‘class clang::Preprocessor’ [-fpermissive]
warning.
llvm-svn: 356756
Now we have vec3 MVTs, this commit implements dwordx3 variants of the
buffer intrinsics.
On gfx6, a dwordx3 buffer load intrinsic is implemented as a dwordx4
instruction, and a dwordx3 buffer store intrinsic is not supported.
We need to support the dwordx3 load intrinsic because it is generated by
subtarget-unaware code in InstCombine.
Differential Revision: https://reviews.llvm.org/D58904
Change-Id: I016729d8557b98a52f529638ae97c340a5922a4e
llvm-svn: 356755
Summary:
This patch adds the ability to read a yaml form of a minidump file and
write it out as binary. Apart from the minidump header and the stream
directory, only three basic stream kinds are supported:
- Text: This kind is used for streams which contain textual data. This
is typically the contents of a /proc file on linux (e.g.
/proc/PID/maps). In this case, we just put the raw stream contents
into the yaml.
- SystemInfo: This stream contains various bits of information about the
host system in binary form. We expose the data in a structured form.
- Raw: This kind is used as a fallback when we don't have any special
knowledge about the stream. In this case, we just print the stream
contents in hex.
For this code to be really useful, more stream kinds will need to be
added (particularly for things like lists of memory regions and loaded
modules). However, these can be added incrementally.
Reviewers: jhenderson, zturner, clayborg, aprantl
Subscribers: mgorny, lemo, llvm-commits, lldb-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59482
llvm-svn: 356753
clause in target region.
According to the OpenMP 5.0, 2.11.3 allocate Directive, Restrictions,
allocate directives that appear in a target region must specify an
allocator clause unless a requires directive with the dynamic_allocators
clause is present in the same compilation unit.
llvm-svn: 356752
Breakpad (but not crashpad) will insert an empty (all-zero) build-id
record for modules which do not have a build-id. This tells lldb to
treat such records as empty/invalid uuids.
llvm-svn: 356751
Summary:
Add a way to expand modular headers for PPCallbacks. Checks can opt-in for this
expansion by overriding the new registerPPCallbacks virtual method and
registering their PPCallbacks in the preprocessor created for this specific
purpose.
Use module expansion in the readability-identifier-naming check
Reviewers: gribozavr, usaxena95, sammccall
Reviewed By: gribozavr
Subscribers: nemanjai, mgorny, xazax.hun, kbarton, jdoerfert, cfe-commits
Tags: #clang, #clang-tools-extra
Differential Revision: https://reviews.llvm.org/D59528
llvm-svn: 356750
Summary: To show that dbscan is insensitive to the order of the points.
Subscribers: tschuett, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59693
llvm-svn: 356747
Also fix up a couple of minor issues in the test being updated, where
FileCheck could match on incorrect output and fix the test case order to
match the struct order.
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D59691
llvm-svn: 356746
The RISC-V ISA defines RV32E as an alternative "base" instruction set
encoding, that differs from RV32I by having only 16 rather than 32 registers.
This patch adds basic definitions for RV32E as well as MC layer support
(assembling, disassembling) and tests. The only supported ABI on RV32E is
ILP32E.
Add a new RISCVFeatures::validate() helper to RISCVUtils which can be called
from codegen or MC layer libraries to validate the combination of TargetTriple
and FeatureBitSet. Other targets have similar checks (e.g. erroring if SPE is
enabled on PPC64 or oddspreg + o32 ABI on Mips), but they either duplicate the
checks (Mips), or fail to check for both codegen and MC codepaths (PPC).
Codegen for the ILP32E ABI support and RV32E codegen are left for a future
patch/patches.
Differential Revision: https://reviews.llvm.org/D59470
llvm-svn: 356744
This patch optimizes the emission of a sequence of SELECTs with the same
condition, avoiding the insertion of unnecessary control flow. Such a sequence
often occurs when a SELECT of values wider than XLEN is legalized into two
SELECTs with legal types. We have identified several use cases where the
SELECTs could be interleaved with other instructions. Therefore, we extend the
sequence to include non-SELECT instructions if we are able to detect that the
non-SELECT instructions do not impact the optimization.
This patch supersedes https://reviews.llvm.org/D59096, which attempted to
address this issue by introducing a new SelectionDAG node. Hat tip to Eli
Friedman for his feedback on how to best handle this issue.
Differential Revision: https://reviews.llvm.org/D59355
Patch by Luís Marques.
llvm-svn: 356741
Indicates in the TargetLowering interface that conversions from CC logic to
bitwise logic are allowed. Adds tests that show the benefit when optimization
opportunities are detected. Also adds tests that show that when the optimization
is not applied correct code is generated (but opportunities for other
optimizations remain).
Differential Revision: https://reviews.llvm.org/D59596
Patch by Luís Marques.
llvm-svn: 356740
Spec says about the first symbol table entry that index 0 both designates the first entry in the table
and serves as the undefined symbol index. It should have zero value.
Hence the first symbol table entry has no name. And so has to have a st_name == 0.
(http://refspecs.linuxbase.org/elf/gabi4+/ch4.symtab.html)
Currently, we do not emit zero value for the first symbol table entry.
That happens because we add empty strings to the string builder, which
for each such case adds a zero byte:
(https://github.com/llvm-mirror/llvm/blob/master/lib/MC/StringTableBuilder.cpp#L185)
After the string optimization performed it might return non zero indexes for the
empty string requested.
The patch fixes this issue for the case above and other sections with no names.
Differential revision: https://reviews.llvm.org/D59496
llvm-svn: 356739
Currently, llvm-objcopy incorrectly handles compression and decompression of the
sections from COMDAT groups, because we do not implement the
replaceSectionReferences for this type of the sections.
The patch does that.
Differential revision: https://reviews.llvm.org/D59638
llvm-svn: 356738
GNU objcopy can support output formats like elf32-i386-freebsd and
elf64-x86-64-freebsd. The only difference from their regular non-freebsd
counterparts that I have observed is that the freebsd versions set the
OS/ABI field to ELFOSABI_FREEBSD. This patch sets the OS/ABI field
according based on the format whenever --output-format is specified.
Reviewed by: rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D59645
llvm-svn: 356737
They are not used by anything yet, but a subsequent commit will start
using them for image ops that return 5 dwords.
Differential Revision: https://reviews.llvm.org/D58903
Change-Id: I63e1904081e39a6d66e4eb96d51df25ad399d271
llvm-svn: 356735
Add more complete CHECK lines for the relocations generated when relaxation is
enabled, and add cases where a locally defined symbol is referenced.
Two instances of pcrel_lo(defined_symbol) are commented out, as they will
produce an error. A follow-up patch will fix this.
llvm-svn: 356734