The referenced tests are derived from:
https://bugs.llvm.org/show_bug.cgi?id=32791
and:
https://reviews.llvm.org/D33172
The motivation for including negative tests may not be clear, so I'm adding an explanatory comment here.
In the post-commit thread for r303133:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20170515/453793.html
...it was mentioned that we don't want to add redundant tests. This is a valid point. But in this case,
we have a patch under review (D33172) that demonstrates that no existing regression tests are affected by
a proposed code change, but these are. Therefore, I think these tests have value not visible in any
existing regression tests regardless of whether they show a transform.
Differential Revision: https://reviews.llvm.org/D33242
llvm-svn: 303185
Using LIS can be quite expensive, so caching of calculated region
live-ins and pressure is implemented. It does two things:
1. Caches the info for the second stage when we schedule with
decreased target occupancy.
2. Tracks the basic block from top to bottom thus eliminating the
need to scan whole register file liveness at every region split
in the middle of the block.
The scheduling is now done in 3 stages instead of two, with the first
one being really a no-op and only used to collect scheduling regions
as sent by the scheduler driver.
There is no functional change to the current behavior, only compilation
speed is affected. In general computeBlockPressure() could be simplified
if we switch to backward RP tracker, because scheduler sends regions
within a block starting from the last upward. We could use a natural
order of upward tracker to seamlessly change between regions of the same
block, since live reg set of a previous tracked region would become a
live-out of the next region. That however requires fixing upward tracker
to properly account defs and uses of the same instruction as both are
contributing to the current pressure. When we converge on the produced
pressure we should be able to switch between them back and forth. In
addition, backward tracker is less expensive as it uses LIS in recede
less often than forward uses it in advance.
At the moment the worst known case compilation time has improved from 26
minutes to 8.5.
Differential Revision: https://reviews.llvm.org/D33117
llvm-svn: 303184
According to Intel's Optimization Reference Manual for SNB+:
" For LEA instructions with three source operands and some specific situations, instruction latency has increased to 3 cycles, and must
dispatch via port 1:
- LEA that has all three source operands: base, index, and offset
- LEA that uses base and index registers where the base is EBP, RBP,or R13
- LEA that uses RIP relative addressing mode
- LEA that uses 16-bit addressing mode "
This patch currently handles the first 2 cases only.
Differential Revision: https://reviews.llvm.org/D32277
llvm-svn: 303183
This factors register pressure estimation mechanism from the
GCNSchedStrategy into the forward tracker to unify interface
with other strategies and expose it to other interested phases.
Differential Revision: https://reviews.llvm.org/D33105
llvm-svn: 303179
Summary:
RewritePHIs algorithm used in building of CoroFrame inserts a placeholder
```
%placeholder = phi [%val]
```
on every edge leading to a block starting with PHI node with multiple incoming edges,
so that if one of the incoming values was spilled and need to be reloaded, we have a
place to insert a reload. We use SplitEdge helper function to split the incoming edge.
SplitEdge function does not deal with unwind edges comping into a block with an EHPad.
This patch adds an ehAwareSplitEdge function that can correctly split the unwind edge.
For landing pads, we clone the landing pad into every edge block and replace the original
landing pad with a PHI collection the values from all incoming landing pads.
For WinEH pads, we keep the original EHPad in place and insert cleanuppad/cleapret in the
edge blocks.
Reviewers: majnemer, rnk
Reviewed By: majnemer
Subscribers: EricWF, llvm-commits
Differential Revision: https://reviews.llvm.org/D31845
llvm-svn: 303172
Recommit of r303159 "[DWARF] - Use DWARFAddressRange struct instead of uint64_t pair for DWARFAddressRangesVector"
All places were shitched to use DWARFAddressRange now.
Suggested during review of D33184.
llvm-svn: 303163
The information collected when requested by -time-passes is only printed when
llvm_shutdown is called at the moment. This means that when linking against the LTO
library dynamically and using the C interface, it is not possible to see the timing
information, because llvm_shutdown cannot be called. This change modifies the LTO
code generation functions for both regular LTO and thin LTO to explicitly print and
reset the timing information.
I have tested that this works with our proprietary linker. However, as this relies
on a specific method of building and linking against the LTO library, I'm not sure
how or if this can be tested in the LLVM testsuite.
Reviewed by: mehdi_amini
Differential Revision: https://reviews.llvm.org/D32803
llvm-svn: 303152
The existing sorting order in defined CompareSCEVComplexity sorts AddRecExprs
by loop depth, but does not pay attention to dominance of loops. This can
lead us to the following buggy situation:
for (...) { // loop1
op1 = {A,+,B}
}
for (...) { // loop2
op2 = {A,+,B}
S = add op1, op2
}
In this case there is no guarantee that in operand list of S the op2 comes
before op1 (loop depth is the same, so they will be sorted just
lexicographically), so we can incorrectly treat S as a recurrence of loop1,
which is wrong.
This patch changes the sorting logic so that it places the dominated recs
before the dominating recs. This ensures that when we pick the first recurrency
in the operands order, it will be the bottom-most in terms of domination tree.
The attached test set includes some tests that produce incorrect SCEV
estimations and crashes with oldlogic.
Reviewers: sanjoy, reames, apilipenko, anna
Reviewed By: sanjoy
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D33121
llvm-svn: 303148
This function gives the wrong answer on some non-ELF platforms in some
cases. The function that does the right thing lives in Mangler.h. To try to
discourage people from using this function, give it a different name.
Differential Revision: https://reviews.llvm.org/D33162
llvm-svn: 303134
Shrink-wrapping uses post-dominators to find a restore point that
post-dominates all the uses of CSR / stack.
The way dominator trees are modeled in LLVM today is that unreachable
blocks are not present in a generic dominator tree, so, an unreachable node is
dominated by anything: include/llvm/Support/GenericDomTree.h:467.
Since for post-dominators, a no-return block is considered
"unreachable", calling findNearestCommonDominator on an unreachable node
A and a non-unreachable node B, will return B, which can be false. If we
find such node, we bail out since there is no good restore point
available.
rdar://problem/30186931
llvm-svn: 303130
We don't use section-relative relocations on AArch64, so all symbols must be at
least visible to the linker (i.e. properly global or l_whatever, but not
L_whatever).
llvm-svn: 303118
There's no need (& a bit incorrect) to mask off the high bits of the
register reference when describing a simple bool value.
Reviewers: aprantl
Differential Revision: https://reviews.llvm.org/D31062
llvm-svn: 303117
ARM Neon has native support for half-sized vector registers (64 bits). This
is beneficial for example for 2D and 3D graphics. This patch adds the option
to lower MinVecRegSize from 128 via a TTI in the SLP Vectorizer.
*** Performance Analysis
This change was motivated by some internal benchmarks but it is also
beneficial on SPEC and the LLVM testsuite.
The results are with -O3 and PGO. A negative percentage is an improvement.
The testsuite was run with a sample size of 4.
** SPEC
* CFP2006/482.sphinx3 -3.34%
A pretty hot loop is SLP vectorized resulting in nice instruction reduction.
This used to be a +22% regression before rL299482.
* CFP2000/177.mesa -3.34%
* CINT2000/256.bzip2 +6.97%
My current plan is to extend the fix in rL299482 to i16 which brings the
regression down to +2.5%. There are also other problems with the codegen in
this loop so there is further room for improvement.
** LLVM testsuite
* SingleSource/Benchmarks/Misc/ReedSolomon -10.75%
There are multiple small SLP vectorizations outside the hot code. It's a bit
surprising that it adds up to 10%. Some of this may be code-layout noise.
* MultiSource/Benchmarks/VersaBench/beamformer/beamformer -8.40%
The opt-viewer screenshot can be seen at F3218284. We start at a colder store
but the tree leads us into the hottest loop.
* MultiSource/Applications/lambda-0.1.3/lambda -2.68%
* MultiSource/Benchmarks/Bullet/bullet -2.18%
This is using 3D vectors.
* SingleSource/Benchmarks/Shootout-C++/Shootout-C++-lists +6.67%
Noise, binary is unchanged.
* MultiSource/Benchmarks/Ptrdist/anagram/anagram +4.90%
There is an additional SLP in the cold code. The test runs for ~1sec and
prints out over 2000 lines. This is most likely noise.
* MultiSource/Applications/aha/aha +1.63%
* MultiSource/Applications/JM/lencod/lencod +1.41%
* SingleSource/Benchmarks/Misc/richards_benchmark +1.15%
Differential Revision: https://reviews.llvm.org/D31965
llvm-svn: 303116
This caused PR33053.
Original commit message:
> The new experimental reduction intrinsics can now be used, so I'm enabling this
> for AArch64. We will need this for SVE anyway, so it makes sense to do this for
> NEON reductions as well.
>
> The existing code to match shufflevector patterns are replaced with a direct
> lowering of the reductions to AArch64-specific nodes. Tests updated with the
> new, simpler, representation.
>
> Differential Revision: https://reviews.llvm.org/D32247
llvm-svn: 303115
We were silently ignoring any features we couldn't match up, which led to
errors in an inline asm block missing the conventional "\n\t".
llvm-svn: 303108
Matthias Braun