Summary:
Also renamed li_simm7 to li16_imm since it's not a simm7 and has an unusual
encoding (it's a uimm7 except that 0x7f represents -1).
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18145
llvm-svn: 264056
Summary:
We can't check the error message for this one because there's another lw/sw
available that covers a larger range. We therefore check the transition
between the two sizes.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D18144
llvm-svn: 264054
Adding support for section names with special characters in them (e.g. "/").
GCC successfully compiles such section names.
This also fixes PR24520.
Differential Revision: http://reviews.llvm.org/D15678
llvm-svn: 264038
Autogenerated from the corresponding assembler tests with a few FIXME added (will fix soon).
Differential Revision: http://reviews.llvm.org/D18249
llvm-svn: 263729
That allows, for example, to print hex-formatted immediates using
llvm-objdump --print-imm-hex command line option.
Differential Revision: http://reviews.llvm.org/D18195
llvm-svn: 263704
This patch adds support for the MachO .alt_entry assembly directive, and uses
it for global aliases with non-zero GEP offsets. The alt_entry flag indicates
that a symbol should be layed out immediately after the preceding symbol.
Conceptually it introduces an alternate entry point for a function or data
structure. E.g.:
safe_foo:
// check preconditions for foo
.alt_entry fast_foo
fast_foo:
// body of foo, can assume preconditions.
The .alt_entry flag is also implicitly set on assembly aliases of the form:
a = b + C
where C is a non-zero constant, since these have the same effect as an
alt_entry symbol: they introduce a label that cannot be moved relative to the
preceding one. Setting the alt_entry flag on aliases of this form fixes
http://llvm.org/PR25381.
llvm-svn: 263521
s_bitset0_b64, s_bitset1_b64 has 32-bit src0, not 64-bit.
s_rfe_b64 has just one destination operand and no source.
Uncomment S_BITCMP* and S_SETVSKIP, adjust SOPC_* classes for that.
Add s_memrealtime test and change comments in smem.s to follow common style.
Change test for s_memtime to use non-zero register to make it really test encoding.
Add tests for s_buffer_load*.
Add tests for SOPC instructions (same for SI and VI)
Differential Revision: http://reviews.llvm.org/D18040
llvm-svn: 263420
The constant is now at source operand 1 (previously at 2).
This is also how it is in legacy AMD sp3 assembler.
Update tests.
Differential Revision: http://reviews.llvm.org/D17984
llvm-svn: 263212
This will allow inline assembler code to utilize these features, but no automatic lowering is provided, except for the previously provided @llvm.trap, which lowers to "ta 5".
The change also separates out the different assembly language syntaxes for V8 and V9 Sparc. Previously, only V9 Sparc assembly syntax was provided.
The change also corrects the selection order of trap disassembly, allowing, e.g. "ta %g0 + 15" to be rendered, more readably, as "ta 15", ignoring the %g0 register. This is per the sparc v8 and v9 manuals.
Check-in includes many extra unit tests to check this works correctly on both V8 and V9 Sparc processors.
Code Reviewed at http://reviews.llvm.org/D17960.
llvm-svn: 263044
Supprot DPP syntax as used in SP3 (except several operands syntax).
Added dpp-specific operands in td-files.
Added DPP flag to TSFlags to determine if instruction is dpp in InstPrinter.
Support for VOP2 DPP instructions in td-files.
Some tests for DPP instructions.
ToDo:
- VOP2bInst:
- vcc is considered as operand
- AsmMatcher doesn't apply mnemonic aliases when parsing operands
- v_mac_f32
- v_nop
- disable instructions with 64-bit operands
- change dpp_ctrl assembler representation to conform sp3
Review: http://reviews.llvm.org/D17804
llvm-svn: 263008
s_setpc_b64 has just one 64-bit source which is the address of instruction to jump to.
Differential Revision: http://reviews.llvm.org/D17888
llvm-svn: 263005
These correspond to IMAGE_ATOMIC_* and are going to be used by Mesa for the
GL_ARB_shader_image_load_store extension.
Initial change by Nicolai H.hnle
Differential Revision: http://reviews.llvm.org/D17401
llvm-svn: 262701
Previosy, if actual instruction have one of optional operands then other optional operands listed before this also should be presented.
For example instruction v_fract_f32 v0, v1, mul:2 have one optional operand - OMod and do not have optional operand clamp. Previously this was not allowed because clamp is listed before omod in AsmString:
string AsmString = "v_fract_f32$vdst, $src0_modifiers$clamp$omod";
Making this work required some hacks (both OMod and Clamp match classes have same PredicateMethod).
Now, if MatchInstructionImpl meets formal optional operand that is not presented in actual instruction it skips this formal operand and tries to match current actual operand with next formal.
Patch by: Sam Kolton
Review: http://reviews.llvm.org/D17568
[AMDGPU] Assembler: Check immediate types for several optional operands in predicate methods
With this change you should place optional operands in order specified by asm string:
clamp -> omod
offset -> glc -> slc -> tfe
Fixes for several tests.
Depends on D17568
Patch by: Sam Kolton
Review: http://reviews.llvm.org/D17644
llvm-svn: 262314
Summary:
The bug was that dextu's operand 3 would print 0-31 instead of 32-63 when
printing assembly. This came up when replacing
MipsInstPrinter::printUnsignedImm() with a version that could handle arbitrary
bit widths.
MipsAsmPrinter::printUnsignedImm*() don't seem to be used so they have been
removed.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15521
llvm-svn: 262231
Summary:
Previously, it would always select DEXT and substitute any invalid matches
for DEXTU/DEXTM during MipsMCCodeEmitter::encodeInstruction(). This works
but causes problems when adding range checked immediates to IAS.
Now isel selects the correct variant up front.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D16810
llvm-svn: 262229
Previous check-in message was:
The patch adds missing registers and instructions to complete all the registers supported by the Sparc v8 manual.
These are all co-processor registers, with the exception of the floating-point deferred-trap queue register.
Although these will not be lowered automatically by any instructions, it allows the use of co-processor
instructions implemented by inline-assembly.
Code Reviewed at http://reviews.llvm.org/D17133, with the exception of a very small change in brace placement in SparcInstrInfo.td,
which was formerly causing a problem in the disassembly of the %fq register.
llvm-svn: 262135
These are all co-processor registers, with the exception of the floating-point deferred-trap queue register.
Although these will not be lowered automatically by any instructions, it allows the use of co-processor
instructions implemented by inline-assembly.
Code Reviewed at http://reviews.llvm.org/D17133, with the exception of a very small change in brace placement in SparcInstrInfo.td,
which was formerly causing a problem in the disassembly of the %fq register.
llvm-svn: 262133
This matches the behavior of the HSAIL clock instruction.
s_realmemtime is used if the subtarget supports it, and falls
back to s_memtime if not.
Also introduces new intrinsics for each of s_memtime / s_memrealtime.
llvm-svn: 262119
Add parsing and printing of image operands. Matches legacy sp3 assembler.
Change image instruction order to have data/image/sampler operands in the beginning. This is needed because optional operands in MC are always last.
Update SITargetLowering for new order.
Add basic MC test.
Update CodeGen tests.
Review: http://reviews.llvm.org/D17574
llvm-svn: 261995
Support all instructions with VOP1 encoding with 32 or 64-bit operands for VI subtarget:
VGPR_32 and VReg_64 operand register classes
VS_32 and VS_64 operand register classes with inline and literal constants
Tests for VOP1 instructions.
Patch by: skolton
Reviewers: arsenm, tstellarAMD
Review: http://reviews.llvm.org/D17194
llvm-svn: 261878
We were emitting only one half of a the paired relocations needed for these
instructions because we decided that an offset needed a scattered relocation.
In fact, movw/movt relocations can be paired without being scattered.
llvm-svn: 261679
src1 of s_bfe_u64 is 32-bit (same as s_bfe_i64).
src0 and src1 of s_bfm_b64 are 32-bit.
Update tests.
Review: http://reviews.llvm.org/D17480
Reviewers: arsenm
llvm-svn: 261621
Changes:
- Added disassembler project
- Fixed all decoding conflicts in .td files
- Added DecoderMethod=“NONE” option to Target.td that allows to
disable decoder generation for an instruction.
- Created decoding functions for VS_32 and VReg_32 register classes.
- Added stubs for decoding all register classes.
- Added several tests for disassembler
Disassembler only supports:
- VI subtarget
- VOP1 instruction encoding
- 32-bit register operands and inline constants
[Valery]
One of the point that requires to pay attention to is how decoder
conflicts were resolved:
- Groups of target instructions were separated by using different
DecoderNamespace (SICI, VI, CI) using similar to AssemblerPredicate
approach.
- There were conflicts in IMAGE_<> instructions caused by two
different reasons:
1. dmask wasn’t specified for the output (fixed)
2. There are image instructions that differ only by the number of
the address components but have the same encoding by the HW spec. The
actual number of address components is determined by the HW at runtime
using image resource descriptor starting from the VGPR encoded in an
IMAGE instruction. This means that we should choose only one instruction
from conflicting group to be the rule for decoder. I didn’t find the way
to disable decoder generation for an arbitrary instruction and therefore
made a onelinear fix to tablegen generator that would suppress decoder
generation when DecoderMethod is set to “NONE”. This is a change that
should be reviewed and submitted first. Otherwise I would need to
specify different DecoderNamespace for every instruction in the
conflicting group. I haven’t checked yet if DecoderMethod=“NONE” is not
used in other targets.
3. IMAGE_GATHER decoder generation is for now disabled and to be
done later.
[/Valery]
Patch By: Sam Kolton
Differential Revision: http://reviews.llvm.org/D16723
llvm-svn: 261185
This section is used for debug information and has no need to be
in memory at runtime. This patch also fixes an error when compiling
the Linux kernel. The error is that there are relocations within the
.pdr section in a VDSO. SHT_REL was removed as it is a section type
and not a section flag, therefore it does not make sense for it to
be there. With this patch, LLVM now emits the same flags as
the GNU assembler.
llvm-svn: 261083
The usual way to get a 32-bit relocation is to use a constant extender which doubles the size of the instruction, 4 bytes to 8 bytes.
Another way is to put a .word32 and mix code and data within a function. The disadvantage is it's not a valid instruction encoding and jumping over it causes prefetch stalls inside the hardware.
This relocation packs a 23-bit value in to an "r0 = add(rX, #a)" instruction by overwriting the source register bits. Since r0 is the return value register, if this instruction is placed after a function call which return void, r0 will be filled with an undefined value, the prefetch won't be confused, and the callee can access the constant value by way of the link register.
llvm-svn: 261006
Summary:
In order to pass the tests, this required marking R_MIPS_16 relocations
as needing to point to the symbol and not the section.
Reviewers: vkalintiris, dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D17200
llvm-svn: 260896
Summary:
This section is used for debug information and has no need to be
in memory at runtime. With this patch, LLVM now emits the same flags as
the GNU assembler. This patch also fixes an error when compiling
the Linux kernel, The error is that there are relocations within the
.pdr section in a VDSO.
Reviewers: vkalintiris, dsanders
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D17199
llvm-svn: 260879
Historically, AMD internal sp3 assembler has flat_store* addr, data
format. To match existing code and to enable reuse, change LLVM
definitions to match. Also update MC and CodeGen tests.
Differential Revision: http://reviews.llvm.org/D16927
Patch by: Nikolay Haustov
llvm-svn: 260694
Summary:
Added support for "VOP3Only" attribute in VOP3bInst encoding.
Set VOP3Only=1 for V_DIV_SCALE_F64/32 insns.
Added support for multi-dest instructions in AMDGPUAs::cvt*().
Added lit test for "V_DIV_SCALE_F64|F32 vreg,vcc|sreg,vreg,vreg,vreg".
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, SamWot, nhaustov, vpykhtin
Differential Revision: http://reviews.llvm.org/D16995
Patch By: Artem Tamazov
llvm-svn: 260560
Summary:
Fixed an issue for mips with an instruction such as 'sdc1 $f1, 272 +8(a0)' which has a space between '272' and '+'. The parser would then parse '272' and '+8' as two arguments instead of a single expression resulting in one too many arguments in the pseudo instruction.
The reason that the test case has been changed is so that the expected
output matches the output of the GNU assembler.
Reviewers: vkalintiris, dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13592
llvm-svn: 260521
Separate methods to convert parsed instructions to MCInst:
- VOP3 only instructions (always create modifiers as operands in MCInst)
- VOP2 instrunctions with modifiers (create modifiers as operands
in MCInst when e64 encoding is forced or modifiers are parsed)
- VOP2 instructions without modifiers (do not create modifiers
as operands in MCInst)
- Add VOP3Only flag. Pass HasMods flag to VOP3Common.
- Simplify code that deals with modifiers (-1 is now same as
0). This is no longer needed.
- Add few tests (more will be added separately).
Update error message now correct.
Patch By: Nikolay Haustov
Differential Revision: http://reviews.llvm.org/D16778
llvm-svn: 260483
New option --elf-output-style=LLVM or GNU
Enables -file-headers in readelf style when elf-output-style=GNU
Differential revision: http://reviews.llvm.org/D14128
llvm-svn: 260430
New option --elf-output-style=LLVM or GNU
Enables -file-headers in readelf style when elf-output-style=GNU
Differential revision: http://reviews.llvm.org/D14128
llvm-svn: 260391
The encodings for floating point conditions A(lways) and N(ever) were
incorrectly specified for the assembly parser, per Sparc manual v8 page
121. This change corrects that mistake.
Also, strangely, all of the branch instructions already had MC test
cases, except for the broken ones. Added the tests.
Patch by Chris Dewhurst
Differential Revision: http://reviews.llvm.org/D17074
llvm-svn: 260390
Now the parser supports `%got(sym)` expressions only but `%got(sym + const)`
variant is also valid and accepted by GAS.
Differential Revision: http://reviews.llvm.org/D16885
llvm-svn: 260305
CodeView, like most other debug formats, represents the live range of a
variable so that debuggers might print them out.
They use a variety of records to represent how a particular variable
might be available (in a register, in a frame pointer, etc.) along with
a set of ranges where this debug information is relevant.
However, the format only allows us to use ranges which are limited to a
maximum of 0xF000 in size. This means that we need to split our debug
information into chunks of 0xF000.
Because the layout of code is not known until *very* late, we must use a
new fragment to record the information we need until we can know
*exactly* what the range is.
llvm-svn: 259868
CodeView requires us to accurately describe the extent of the inlined
code. We did this by grabbing the next debug location in source order
and using *that* to denote where we stopped inlining. However, this is
not sufficient or correct in instances where there is no next debug
location or the next debug location belongs to the start of another
function.
To get this correct, use the end symbol of the function to denote the
last possible place the inlining could have stopped at.
llvm-svn: 259548
This directive emits the binary annotations that describe line and code
deltas in inlined call sites. Single-stepping through inlined frames in
windbg now works.
llvm-svn: 259535
Summary:
Enables eip-based addressing, e.g.,
lea constant(%eip), %rax
lea constant(%eip), %eax
in MC, (used for the x32 ABI). EIP-base addressing is also valid in x86_64,
it is left enabled for that architecture as well.
Patch by João Porto
Differential Revision: http://reviews.llvm.org/D16581
llvm-svn: 259528
Summary:
The bugs were:
* teq and similar take 4-bit unsigned immediates on microMIPS.
* teqi and similar have side-effects like teq do.
* shll_s.w and shra_r.w take 5-bit unsigned immediates.
* The various DSP ext* instructions take a 5-bit immediate.
* repl.qh takes an 8-bit unsigned immediate.
* repl.ph takes a 10-bit unsigned immediate.
* rddsp/wrdsp take a 10-bit unsigned immediate.
* teqi and similar take signed 16-bit immediates (10-bit for microMIPS).
* Out-of-range immediate macros for or/xor take a simm32/simm64 depending
on architecture. I'll fix the simm64 case properly when I reach simm32.
lui is a bit more lenient than GAS and accepts signed immediates in addition
to unsigned. This is because MipsMCExpr can produce signed values when
constant folding and it currently lacks a way of knowing it should fold to
an unsigned value.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15446
llvm-svn: 259360
This support is _very_ rudimentary, just enough to get some basic data
into the CodeView debug section.
Left to do is:
- Use the combined opcodes to save space.
- Do something about code offsets.
llvm-svn: 259230
This reverts commit r259117.
The LineInfo constructor is defined in the codeview library and we have
to link against it now. Doing that isn't trivial, so reverting for now.
llvm-svn: 259126
Adds a new family of .cv_* directives to LLVM's variant of GAS syntax:
- .cv_file: Similar to DWARF .file directives
- .cv_loc: Similar to the DWARF .loc directive, but starts with a
function id. CodeView line tables are emitted by function instead of
by compilation unit, so we needed an extra field to communicate this.
Rather than overloading the .loc direction further, we decided it was
better to have our own directive.
- .cv_stringtable: Emits the codeview string table at the current
position. Currently this just contains the filenames as
null-terminated strings.
- .cv_filechecksums: Emits the file checksum table for all files used
with .cv_file so far. There is currently no support for emitting
actual checksums, just filenames.
This moves the line table emission code down into the assembler. This
is in preparation for implementing the inlined call site line table
format. The inline line table format encoding algorithm requires knowing
the absolute code offsets, so it must run after the assembler has laid
out the code.
David Majnemer collaborated on this patch.
llvm-svn: 259117
Daniel Sanders