When we see a .arch or .cpu directive, we should try to avoid switching
ARM/Thumb mode if possible.
If we do have to switch modes, we also need to emit the correct mapping
symbol for the new ISA. We did not do this previously, so could emit
ARM code with Thumb mapping symbols (or vice-versa).
The GAS behaviour is to always stay in the same mode, and to emit an
error on any instructions seen when the current mode is not available on
the current target. We can't represent that situation easily (we assume
that Thumb mode is available if ModeThumb is set), so we differ from the
GAS behaviour when switching to a target that can't support the old
mode. I've added a warning for when this implicit mode-switch occurs.
Differential Revision: http://reviews.llvm.org/D18955
llvm-svn: 265936
Restrict the max length of long nops for Lakemont to 7. Experiments on MCU
benchmarks (Dhrystone, Coremark) show that this is the most optimal length.
Differential Revision: http://reviews.llvm.org/D18897
llvm-svn: 265924
For VGPR_32 operand disassembler expects a VGPR register encoded as 0..255 (enum8 src operand).
readfirstlane/readline actually has enum9 operand and this change fixes VGPR_32 to VS_32 (enum9 encoding).
Differential Revision: http://reviews.llvm.org/D18696
llvm-svn: 265670
This patch implements the following BookII and Book III instructions:
- copy copy_first cp_abort paste paste. paste_last
- msgsync
- slbieg slbsync
- stop
Total 10 instructions
Reviewers: nemanjai hfinkel tjablin amehsan kbarton
llvm-svn: 265504
This patch adds support for compact jumps similiar to the previous compact
branch support for MIPSR6. Unlike compact branches, compact jumps do not
have a forbidden slot.
As MipsInstrInfo::getEquivalentCompactForm can determine the correct
expansion for jumps and branches for both microMIPS and MIPSR6, remove the
unnecessary distinction in the delay slot filler.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
llvm-svn: 265390
Summary:
At this point we should be able to enable IAS by default for O32 without
breaking check-all, or recursion.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18439
llvm-svn: 265302
This adds MC support for fused compare + indirect branch instructions,
ie. CRB, CGRB, CLRB, CLGRB, CIB, CGIB, CLIB, CLGIB. They aren't actually
generated yet -- this is preparation for their use for conditional
returns in the next iteration of D17339.
Author: koriakin
Differential Revision: http://reviews.llvm.org/D18742
llvm-svn: 265296
Add support for the AArch64 .cpu directive. This is a slightly involved
directive since the parameter is actually a variable encoded string. The
general structure is:
<cpu>[[+-]<feature>]*
We now map some of the supported string names for features for internal
representation of feature flags. If we encounter one which we do not support,
bail out as we cannot validate the assembly any longer.
Resolves PR27010.
llvm-svn: 265240
Summary: The assembler was picking the wrong JR variant because the pre-R6 one was still enabled at R6.
Author: nitesh.jain
Reviewers: vkalintiris, dsanders
Subscribers: dsanders, llvm-commits, mohit.bhakkad, sagar, bhushan, jaydeep
Differential: D18387
llvm-svn: 265134
Some ARM instructions encode 32-bit immediates as a 8-bit integer (0-255)
and a 4-bit rotation (0-30, even) in its least significant 12 bits. The
original fixup, FK_Data_4, patches the instruction by the value bit-to-bit,
regardless of the encoding. For example, assuming the label L1 and L2 are
0x0 and 0x104 respectively, the following instruction:
add r0, r0, #(L2 - L1) ; expects 0x104, i.e., 260
would be assembled to the following, which adds 1 to r0, instead of 260:
e2800104 add r0, r0, #4, 2 ; equivalently 1
The new fixup kind fixup_arm_mod_imm takes care of the encoding:
e2800f41 add r0, r0, #260
Patch by Ting-Yuan Huang!
llvm-svn: 265122
When a fixup that can be resolved by the assembler is out of range, we should
report an error in the source, rather than crashing.
Differential Revision: http://reviews.llvm.org/D18402
llvm-svn: 265120
isBrImm should accept any non-constant immediate. Previously it was only accepting LanaiMCExpr ones which was wrong.
Differential Revision: http://reviews.llvm.org/D18571
llvm-svn: 265032
This patch corresponds to review:
http://reviews.llvm.org/D18032
This patch provides asm implementation for the following instructions:
lwat, ldat, stwat, stdat, ldmx, mcrxrx
llvm-svn: 265022
Summary:
There are too many instructions to exhaustively test so addiu and lwc2 are
used as representative examples.
It should be noted that many memory instructions that should have simm16
range checking do not because it is also necessary to support the macro
of the same name which accepts simm32. The range checks for these occur in
the macro expansion.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18437
llvm-svn: 265019
Summary:
ldc2/sdc2 now emit slightly worse diagnostics for MIPS-I. The problem
is that they don't trigger the custom parser because all the candidates
are disabled by feature bits. On all other subtargets, the diagnostics are
accurate but are subject to the usual issues of needing to report multiple
ways to correct the code (e.g. smaller offset, enable a CPU feature) but
only being able to report one error.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18436
llvm-svn: 265018
Summary:
Also, made test_mi10.s formatting consistent with the majority of the
MC tests.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18435
llvm-svn: 265014
Summary:
The bug was that microMIPS's [ls]w[lr]e instructions claimed to support a
12-bit offset when it is only 9-bit.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D18434
llvm-svn: 265010
For compatability with GAS, nop and nopr are recognized as alises for
bc and bcr, respectively. A mask of 0 turns these instructions
effectively into no-operations.
Reviewed by Ulrich Weigand.
llvm-svn: 264875
This is a fix for PR26941.
When there is both a section and a global definition with the same
name, the global wins.
Section symbols are not added to the symbol table; section references
are left undefined and fixed up in the object writer unless they've
been satisfied by some other definition.
llvm-svn: 264649
The `MipsMCInstrAnalysis` class overrides the `evaluateBranch` method
and calculates target addresses for branch and calls instructions.
That allows llvm-objdump to print functions' names in branch instructions
in the disassemble mode.
Differential Revision: http://reviews.llvm.org/D18209
llvm-svn: 264309
The patch supports common STV_xxx visibility flags and MIPS specific
STO_MIPS_xxx flags.
Differential Revision: http://reviews.llvm.org/D18447
llvm-svn: 264300
If we can't handle a relocation type, report it as an error in the source,
rather than asserting. I've added a more descriptive message and a test for the
only cases of this that I've been able to trigger.
Differential Revision: http://reviews.llvm.org/D18388
llvm-svn: 264156
Daniel Sanders