in r344626 & recommitting. Original commit msg:
Simplify LocateDSYMInVincinityOfExecutable by moving
some redundant code into a separate function,
LookForDsymNextToExecutablePath, and having that function
also look for .dSYM.yaa files in addition to .dSYM
bundles.
Differential Revision: https://reviews.llvm.org/D53305
<rdar://problem/40406580>
llvm-svn: 344646
some redundant code into a separate function,
LookForDsymNextToExecutablePath, and having that function
also look for .dSYM.yaa files in addition to .dSYM
bundles.
Differential Revision: https://reviews.llvm.org/D53305
<rdar://problem/40406580>
llvm-svn: 344626
LC_BUILD_VERSION load command handling - this
commit is a combination of patches by Adrian
Prantl and myself. llvm::Triple::BridgeOS
isn't defined yet, so all references to that
are currently commented out.
Also update Xcode project file to build the
NativePDB etc plugins.
<rdar://problem/43353615>
llvm-svn: 344209
Summary:
This function existed (with identical code) in both NativeProcessLinux
and NativeProcessNetBSD, and it is likely that it would be useful to any
future implementation of NativeProcessProtocol.
Therefore I move it to the base class.
Reviewers: krytarowski
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D52719
llvm-svn: 343683
Summary:
This function encodes the knowledge of whether the PC points to the
breakpoint instruction of the one following it after the breakpoint is
"hit". This behavior mainly(*) depends on the architecture and not on the
OS, so it makes sense for it to be implemented in the base class, where
it can be shared between different implementations (Linux and NetBSD
atm).
(*) It is possible for an OS to expose a different API, perhaps by doing
some fixups in the kernel. In this case, the implementation can override
this function to implement custom behavior.
Reviewers: krytarowski, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D52532
llvm-svn: 343409
NativeProcessProtocol::ReadMemoryWithoutTrap had a bug, where it failed
to properly remove inserted breakpoint opcodes if the memory read
partially overlapped the trap opcode. This could not happen on x86
because it has a one-byte breakpoint instruction, but it could happen on
arm, which has a 4-byte breakpoint instruction (in arm mode).
Since triggerring this condition would only be possible on an arm
machine (and even then it would be a bit tricky). I test this using a
NativeProcessProtocol unit test.
llvm-svn: 343076
Summary:
This patch adds a framework for adding descriptions to the command completions we provide.
It also adds descriptions for completed top-level commands so that we can test this code.
Completions are in general supposed to be displayed alongside the completion itself. The descriptions
can be used to provide additional information about the completion to the user. Examples for descriptions
are function signatures when completing function calls in the expression command or the binary name
when providing completion for a symbol.
There is still some boilerplate code from the old completion API left in LLDB (mostly because the respective
APIs are reused for non-completion related purposes, so the CompletionRequest doesn't make sense to be
used), so that's why I still had to change some function signatures. Also, as the old API only passes around a
list of matches, and the descriptions are for these functions just another list, I had to add some code that
essentially just ensures that both lists are always the same side (e.g. all the manual calls to
`descriptions->AddString(X)` below a `matches->AddString(Y)` call).
The initial command descriptions that come with this patch are just reusing the existing
short help that is already added in LLDB.
An example completion with descriptions looks like this:
```
(lldb) pl
Available completions:
platform -- Commands to manage and create platforms.
plugin -- Commands for managing LLDB plugins.
```
Reviewers: #lldb, jingham
Reviewed By: #lldb, jingham
Subscribers: jingham, JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D51175
llvm-svn: 342181
The two existing implementations have the function implemented
identically, and there's no reason to believe that this would be
different for other implementations.
llvm-svn: 342167
Summary:
One of the conclusions of the discussion on D49740 was that SafeMachO is better
off in the Host module (as that's the only place which should include
mach/machine.h, which is what this header is working around). Also, Utility,
which is the only module which cannot include Host, should not be doing
anything with object file formats.
This patch implements that move, and also removes any unneded includes of that
file.
I've verified that MacOS still compiles after this.
Reviewers: jingham, zturner, teemperor
Subscribers: fedor.sergeev, lldb-commits
Differential Revision: https://reviews.llvm.org/D50383
llvm-svn: 342050
This recommits r341487, which was reverted due to failing tests with
clang. It turned out I had incorrectly expected that the literal arrays
passed to ArrayRef constructor will have static (permanent) storage.
This was only the case with gcc, while clang was constructing them on
stack, leading to dangling pointers when the function returns.
The fix is to explicitly assign static storage duration to the opcode
arrays.
llvm-svn: 341758
Summary:
Previously we SetUseColor(true) wrongly when output was not a terminal so it broken some (not public) bots.
Thanks for issue report, @stella.stamenova
Reviewers: stella.stamenova, zturner
Reviewed By: stella.stamenova
Subscribers: abidh, lldb-commits, stella.stamenova
Differential Revision: https://reviews.llvm.org/D51772
llvm-svn: 341746
return the opcode as a Expected<ArrayRef> instead of a
Status+pointer+size combo.
I also move the linux implementation to the base class, as the trap
opcodes are likely to be the same for all/most implementations of the
class (except the arm one, where linux chooses a different opcode than
what the arm spec recommends, which I keep linux-specific).
llvm-svn: 341487
Summary:
LLVM provide (str)errno helpers, so convert code to use it.
Also fixes warning:
/home/xbolva00/LLVM/llvm/tools/lldb/source/Host/common/PseudoTerminal.cpp:248:25: warning: ignoring return value of ‘char* strerror_r(int, char*, size_t)’, declared with attribute warn_unused_result [-Wunused-result]
::strerror_r(errno, error_str, error_len);
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Subscribers: abidh, lldb-commits
Differential Revision: https://reviews.llvm.org/D51591
llvm-svn: 341320
Summary:
This class was initially in Host because its implementation used to be
very OS-specific. However, with C++11, it has become a very simple
std::condition_variable wrapper, with no host-specific code.
It is also a general purpose utility class, so it makes sense for it to
live in a place where it can be used by everyone.
This has no effect on the layering right now, but it enables me to later
move the Listener+Broadcaster+Event combo to a lower layer, which is
important, as these are used in a lot of places (notably for launching a
process in Host code).
Reviewers: jingham, zturner, teemperor
Reviewed By: zturner
Subscribers: xiaobai, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D50384
llvm-svn: 341089
These three classes have no external dependencies, but they are used
from various low-level APIs. Moving them down to Utility improves
overall code layering (although it still does not break any particular
dependency completely).
The XCode project will need to be updated after this change.
Differential Revision: https://reviews.llvm.org/D49740
llvm-svn: 339127
Summary:
LLDB_PLUGINS doesn't exist as a variable, so this line doesn't add any dependencies and is
just confusing. It seems this slipped in from the gdb-remote CMake I was using as a CMake template.
The gdb-remote CMake itself is using a local LLDB_PLUGINS variable, so that code is fine.
Reviewers: davide
Reviewed By: davide
Subscribers: davide, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D49695
llvm-svn: 337741
Summary: Right now we always try to retrieve ComSpec and if we fail, we give up. This rarely fails, but we can update the logic so that we fail even less frequently. Since there is a well-known path (albeit not always correct), try the path when we failed to retrieve it. Note that on other platforms, we generally just return a well-known path without any checking.
Reviewers: asmith, zturner, labath
Reviewed By: zturner, labath
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49451
llvm-svn: 337395
I've made the code accept only 16 byte UUIDs, which is technically not
NFC (previously it would also accept 20 byte ones, but use only the
first 16 bytes), but this should be more correct as mac UUIDs are always
16 byte long.
llvm-svn: 335247
Summary:
The only reason python was used in the Host module was to compute the
python path. I resolve this the same way as D47384 did for clang, by
moving the path computation into the python plugin and modifying
SBHostOS class to call into this module for ePathTypePythonDir.
Reviewers: zturner, jingham, davide
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D48215
llvm-svn: 335104
Summary:
Instead of a function taking an enum value determining which path to
return, we now have a suite of functions, each returning a single path
kind. This makes it easy to move the python-path function into a
specific plugin in a follow-up commit.
All the users of GetLLDBPath were converted to call specific functions
instead. Most of them were hard-coding the enum value anyway, so this
conversion was simple. The only exception was SBHostOS, which I've
changed to use a switch on the incoming enum value.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D48272
llvm-svn: 335052
I actually did check that macos builds before committing, but this error
was in conditionally compiled code that did not seem to be used on my
machine.
I also fix a typo in the previous speculative NetBSD patch.
llvm-svn: 334955
Summary:
This has multiple advantages:
- we need only one function argument/instance variable instead of three
- no need to default initialize variables
- no custom parsing code
- VersionTuple has comparison operators, which makes version comparisons much
simpler
Reviewers: zturner, friss, clayborg, jingham
Subscribers: emaste, lldb-commits
Differential Revision: https://reviews.llvm.org/D47889
llvm-svn: 334950
SetFile has an optional style argument which defaulted to the native
style. This patch makes that argument mandatory so clients of the
FileSpec class are forced to think about the correct syntax.
At the same time this introduces a (protected) convenience method to
update the file from within the FileSpec class that keeps the current
style.
These two changes together prevent a potential pitfall where the style
might be forgotten, leading to the path being updated and the style
unintentionally being changed to the host style.
llvm-svn: 334663
Summary:
test_set_working_dir was testing two scenario: failure to set the working dir because of a non existent directory and succeeding to set the working directory. Since the negative case fails on both Linux and Windows, the positive case was never tested. I split the test into two which allows us to always run both the negative and positive cases. The positive case now succeeds on Linux and the negative case still fails.
During the investigation, it turned out that lldbtest.py will try to execute a process launch command up to 3 times if the command failed. This means that we could be covering up intermittent failures by running any test that does process launch multiple times without ever realizing it. I've changed the counter to 1 (though it can still be overwritten with the environment variable).
This change also fixes both the positive and negative cases on Windows. There were a few issues:
1) In ProcessLauncherWindows::LaunchProcess, the error was not retrieved until CloseHandle was possibly called. Since CloseHandle is also a system API, its success would overwrite any existing error that could be retrieved using GetLastError. So by the time the error was retrieved, it was now a success.
2) In DebuggerThread::StopDebugging TerminateProcess was called on the process handle regardless of whether it was a valid handle. This was causing the process to crash when the handle was LLDB_INVALID_PROCESS (0xFFFFFFFF).
3) In ProcessWindows::DoLaunch we need to check that the working directory exists before launching the process to have the same behavior as other platforms which first check the directory and then launch process. This way we also control the exact error string.
Reviewers: labath, zturner, asmith, jingham
Reviewed By: labath
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48050
llvm-svn: 334642
Summary:
This patch adds a modulemap which allows compiling the lldb headers into C++ modules
(for example in builds with LLVM_ENABLE_MODULES=On).
Even though most of the affected code has been cleaned up to work with the more strict
C++ module semantics, there are still some workarounds left in the current modulemap
(the most obvious one is the big `lldb` wrapper module).
It also moves the Obj-C++ files in lldb to their own subdirectories. This was necessary
because we need to filter out the modules flags for this code.
Note: With the latest clang and libstdc++ it seems necessary to have a STL C++ module
to get a working LLVM_ENABLE_MODULES build for lldb. Otherwise clang will falsely
detect ODR violations in the textually included STL code inside the lldb modules.
Reviewers: aprantl, bruno
Reviewed By: aprantl, bruno
Subscribers: mgorny, yamaguchi, v.g.vassilev, lldb-commits
Differential Revision: https://reviews.llvm.org/D47929
llvm-svn: 334611
Host depended on clang because HostInfo had a function to get
the directory where clang was installed. We move this over to
the clang expression parser plugin where it's more at home.
Differential Revision: https://reviews.llvm.org/D47384
llvm-svn: 333933
Summary:
This improves the process of cross-compiling from macOS to Linux
since these files aren't used / needed at all.
Reviewers: clayborg, labath
Subscribers: lldb-commits, krytarowski
Differential Revision: https://reviews.llvm.org/D47420
llvm-svn: 333400
This call was originally being only made when launching for debug (as an
attempt to make sure we don't impart extra privileges on the launched
process), but after the debug and non-debug paths were merged, it made
it's way into generic code. This was causing problems in locked down
android environments which disallowed calling setgid even if it would be
a no-op. This prevented launching llgs from lldb-server platform.
Overall I'm not sure we should be calling setgid in the first place
(it seems random -- e.g. why don't we call setuid then as well).
However, all our other copies of launch code have it, so I choose to
keep it for now.
llvm-svn: 333073
The first fix wasn't enough, there is still a missing
ProcessInstanceInfo include in Host.mm. I won't be able to test a fix
before leaving work, so I am reverting both commits.
This reverts commit r332250 and the subsequent fix attempt.
llvm-svn: 332261
The Process class was only being referenced because of the last-ditch
effort in the process launchers to set a process death callback in case
one isn't set already.
Although launching a process for debugging is the most important kind of
"launch" we are doing, it is by far not the only one, so assuming this
particular callback is the one to be used is not a good idea (besides
breaking layering). Instead of assuming a particular exit callback, I
change the launcher code to require the callback to be set by the user (and fix
up the two call sites which did not set the callback already).
Reviewers: jingham, davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D46395
llvm-svn: 332250
Inside Xcode and in Xcode toolchains LLDB is always in lockstep
with the Swift compiler, so it can reuse its Clang resource
directory. This allows LLDB and the Swift compiler to share the
same Clang module cache.
rdar://problem/40039633
Differential Revision: https://reviews.llvm.org/D46736
llvm-svn: 332111
Summary:
The comments on this class were out of date with the implementation, and
the implementation itself was inconsistent with our usage of the Timeout
class (I started converting everything to use this class back in D27136,
but I missed this one). I avoid duplicating the waiting logic by
introducing a templated WaitFor function, and make other functions
delegate to that. This function can be also used as a replacement for
the unused WaitForBitToBeSet functions I removed, if it turns out to be
necessary.
As this changes the meaning of a "zero" timeout, I tracked down all the
callers of these functions and updated them accordingly. Propagating the
changes to all the callers of RunShellCommand was a bit too much for
this patch, so I stopped there and will continue that in a follow-up
patch.
I also add some basic unittests for the functions I modified.
Reviewers: jingham, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D46580
llvm-svn: 331880
The function can only return in one of two ways: the Predicate value is
successfully set within the allotted time, or it isn't (the wait times
out). These states can be represented in the return value, and the extra
arg adds no value.
llvm-svn: 331458
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
Summary:
The Args class is used in plenty of places besides the command
interpreter (e.g., anything requiring an argc+argv combo, such as when
launching a process), so it needs to be in a lower layer. Now that the
class has no external dependencies, it can be moved down to the Utility
module.
This removes the last (direct) dependency from the Host module to
Interpreter, so I remove the Interpreter module from Host's dependency
list.
Reviewers: zturner, jingham, davide
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D45480
llvm-svn: 330200
LLVM_ON_WIN32 is set exactly with MSVC and MinGW (but not Cygwin) in
HandleLLVMOptions.cmake, which is where _WIN32 defined too. Just use the
default macro instead of a reinvented one.
See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
No intended behavior change.
llvm-svn: 329697
These functions were unused as everyone just went straight for the
direct operations on the register context. In fact, the
Save/RestoreAllRegisters actually appear to be wrong (inverted). Thanks
to Tatyana for pointing this out.
These functions are not very useful now that we can guarantee that each
thread always contains a valid register context, so I just delete them.
llvm-svn: 328770
The difference between this and the previous patch is that now we use
ELF physical addresses only for loading objects into the target (and the
rest of the module load address logic still uses virtual addresses).
Summary:
When writing an object file over gdb-remote, use the vFlashErase, vFlashWrite, and vFlashDone commands if the write address is in a flash memory region. A bare metal target may have this kind of setup.
- Update ObjectFileELF to set load addresses using physical addresses. A typical case may be a data section with a physical address in ROM and a virtual address in RAM, which should be loaded to the ROM address.
- Add support for querying the target's qXfer:memory-map, which contains information about flash memory regions, leveraging MemoryRegionInfo data structures with minor modifications
- Update ProcessGDBRemote to use vFlash commands in DoWriteMemory when the target address is in a flash region
Original discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013093.html
Reviewers: clayborg, labath
Reviewed By: labath
Subscribers: llvm-commits, arichardson, emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D42145
Patch by Owen Shaw <llvm@owenpshaw.net>.
llvm-svn: 327970
This is a more principled approach to disabling Spotlight .dSYM
lookups while running the testsuite, most importantly it also works
for the LIT-based tests, which I overlooked in my initial fix
(renaming the test build dir to lldb-tests.noindex).
Differential Revision: https://reviews.llvm.org/D44342
llvm-svn: 327330
This reverts commit r326261 as it introduces inconsistencies in the
handling of load addresses for ObjectFileELF -- some parts of the class
use physical addresses, and some use virtual. This has manifested itself
as us not being able to set the load address of the vdso "module" on
android.
llvm-svn: 326367
Summary:
When writing an object file over gdb-remote, use the vFlashErase, vFlashWrite, and vFlashDone commands if the write address is in a flash memory region. A bare metal target may have this kind of setup.
- Update ObjectFileELF to set load addresses using physical addresses. A typical case may be a data section with a physical address in ROM and a virtual address in RAM, which should be loaded to the ROM address.
- Add support for querying the target's qXfer:memory-map, which contains information about flash memory regions, leveraging MemoryRegionInfo data structures with minor modifications
- Update ProcessGDBRemote to use vFlash commands in DoWriteMemory when the target address is in a flash region
Original discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013093.html
Reviewers: clayborg, labath
Reviewed By: labath
Subscribers: arichardson, emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D42145
Patch by Owen Shaw <llvm@owenpshaw.net>
llvm-svn: 326261
Removing the template arguments and most of the mutating methods from
CleanUp makes it easier to understand and reuse.
In its present state, CleanUp would be too cumbersome to adapt to cases
where multiple objects need to be released. Take for example this change
in swift-lldb:
https://github.com/apple/swift-lldb/pull/334/files#diff-6f474df750f75c8ba675f2a8408a5629R219
This change is simple to express with the new CleanUp, but not so simple
with the old version.
Differential Revision: https://reviews.llvm.org/D43662
llvm-svn: 325964
Summary:
The PowerPC64 ABI plugin was modified to:
- properly handle vector type return values
- implement support for struct/class return values
A refactoring in the code that handles return values was also performed, to make it possible to handle structs without repeating (when possible) code that handles its fields.
There was also an issue with CreateInstance(), that only created an instance in the first time it was called and then cached it in a static var. When restarting a process under LLDB's control, the ABI's process weak pointer would become null, and using it would result in a segmentation fault. This issue became more evident after the latest changes to PPC64 plugin, that now uses the process pointer to get the target byte order, making LLDB to seg fault when restarting a program. This was fixed by making CreateInstance() to always create a new ABI instance.
All of LLDB's ReturnValue tests are passing for PPC64le now. It should work for PPC64be too, although this was not tested.
Reviewers: labath, clayborg
Reviewed By: labath
Subscribers: lbianc, anajuliapc, llvm-commits, alexandreyy, nemanjai, kbarton
Differential Revision: https://reviews.llvm.org/D42468
Patch by Leandro Lupori <leandro.lupori@gmail.com>.
llvm-svn: 325324
I have found LLDB cannot find separate debug info of Fedora /usr/bin/gdb.
It is because:
lrwxrwxrwx 1 root root 14 Jan 25 20:41 /usr/bin/gdb -> ../libexec/gdb*
-rwxr-xr-x 1 root root 10180296 Jan 25 20:41 /usr/libexec/gdb*
ls: cannot access '/usr/lib/debug/usr/bin/gdb-8.0.1-35.fc27.x86_64.debug': No such file or directory
-r--r--r-- 1 root root 29200464 Jan 25 20:41 /usr/lib/debug/usr/libexec/gdb-8.0.1-35.fc27.x86_64.debug
FYI that -8.0.1-35.fc27.x86_64.debug may look confusing, it was always just
.debug before.
Why is /usr/bin/gdb a symlink is offtopic for this bugreport, Fedora has it so
for some reasons.
It is always safest to look at the .debug file only after resolving all
symlinks on the binary file.
Differential revision: https://reviews.llvm.org/D42853
llvm-svn: 324224
I have found the lookup by build-id
(when lookup by /usr/lib/debug/path/name/exec.debug failed) does not work as
LLDB tries the build-id hex string in uppercase but Fedora uses lowercase.
xubuntu-16.10 also uses lowercase during my test:
/usr/lib/debug/.build-id/6c/61f3566329f43d03f812ae7057e9e7391b5ff6.debug
Differential revision: https://reviews.llvm.org/D42852
llvm-svn: 324222
Fix the Linux plugin lookup path to include appropriate libdir suffix
for the system. To accomplish this, store the value of
LLVM_LIBDIR_SUFFIX in lldb/Host/Config.h as LLDB_LIBDIR_SUFFIX,
and use this variable when defining the plugin path.
Differential Revision: https://reviews.llvm.org/D42317
llvm-svn: 323673
Summary:
The ObjectFile class was used to determine the architecture of a running
process by inspecting it's main executable. There were two issues with
this:
- it's in the wrong layer
- the call can be very expensive (it can end up computing the crc of the
whole file).
Since the process is running on the host, ideally we would be able to
just query the data straight from the OS like darwin does, but there
doesn't seem to be a reasonable way to do that. So, this fixes the
layering issue by using the llvm object library to inspect the file.
Since we know the process is already running on the host, we just need
to peek at a few bytes of the elf header to determine whether it's 32-
or 64-bit (which should make this faster as well).
Pretty much the same logic was implemented in
NativeProcessProtocol::ResolveProcessArchitecture, so I delete this
logic and replace calls with GetProcessInfo.
Reviewers: eugene, krytarowski
Subscribers: mgorny, hintonda, lldb-commits
Differential Revision: https://reviews.llvm.org/D42488
llvm-svn: 323637
Summary:
These were used by Host::LaunchProcess to "resolve" the executable it
was about to launch. The only parts of Platform::ResolveExecutable, which
seem to be relevant here are the FileSpec::ResolvePath and
ResolveExecutableLocation calls.
The rest (most) of that function deals with selecting an architecture
out of a fat binary and making sure we are able to create a Module with that
slice. These are reasonable actions when selecting a binary to debug,
but not for a generic process launching framework (it's technically even
wrong because we should be able to launch a binary with execute
permissions only, but trying to parse such file will obviously fail).
I remove the platform call by inlining the relevant FileSpec calls and
ignoring the rest of the Platform::ResolveExecutable code. The
architecture found by the slice-searching code is being ignored already
anyway, as we use the one specified in the LaunchInfo, so the only
effect of this should be a different error message in case the
executable does not contain the requested architecture -- before we
would get an error message from the Platform class, but now we will get
an error from the actual posix_spawn syscall (this is only relevant on
mac, as it's the only target supporting fat binaries).
Launching targets for debugging should not be affected as here the
executable is pre-resolved at the point when the Target is created.
Reviewers: jingham, clayborg
Subscribers: lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D41902
llvm-svn: 322935
The comment seems to indicate that this function would return the "bin"
directory on linux. I've verified that this is not the case, so I'm
updating the comment to match.
llvm-svn: 322472
of a dSYM per-uuid plist that may be present (dsymutil does not
create this plist, it is only added after the fact by additional
tools) -- either the DBGBuildSourcePath + DBGSourcePath pair of
k-v entries which give us the build-time and debug-time remapping,
or the newer DBGSourcePathRemapping dictionary which may give us
multiple remappings.
I'm changing the order that we process these & add them to the
list of source remappings. If the DBGSourcePathRemapping dict
is present, it should be the first entries we will try.
<rdar://problem/36481989>
llvm-svn: 322418
Summary:
There was some confusion in the code about how to represent process
environment. Most of the code (ab)used the Args class for this purpose,
but some of it used a more basic StringList class instead. In either
case, the fact that the underlying abstraction did not provide primitive
operations for the typical environment operations meant that even a
simple operation like checking for an environment variable value was
several lines of code.
This patch adds a separate Environment class, which is essentialy a
llvm::StringMap<std::string> in disguise. To standard StringMap
functionality, it adds a couple of new functions, which are specific to
the environment use case:
- (most important) envp conversion for passing into execve() and likes.
Instead of trying to maintain a constantly up-to-date envp view, it
provides a function which creates a envp view on demand, with the
expectation that this will be called as the very last thing before
handing the value to the system function.
- insert(StringRef KeyEqValue) - splits KeyEqValue into (key, value)
pair and inserts it into the environment map.
- compose(value_type KeyValue) - takes a map entry and converts in back
into "KEY=VALUE" representation.
With this interface most of the environment-manipulating code becomes
one-liners. The only tricky part was maintaining compatibility in
SBLaunchInfo, which expects that the environment entries are accessible
by index and that the returned const char* is backed by the launch info
object (random access into maps is hard and the map stores the entry in
a deconstructed form, so we cannot just return a .c_str() value). To
solve this, I have the SBLaunchInfo convert the environment into the
"envp" form, and use it to answer the environment queries. Extra code is
added to make sure the envp version is always in sync.
(This also improves the layering situation as Args was in the Interpreter module
whereas Environment is in Utility.)
Reviewers: zturner, davide, jingham, clayborg
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D41359
llvm-svn: 322174
Summary:
For ptys (at least on Linux), the end-of-file (closing of the slave FD)
is signalled by the POLLHUP flag. We were ignoring this flag, which
meant that when this happened, we would spin in a loop, continuously
calling poll(2) and not making any progress.
This makes sure we treat POLLHUP as a read event (reading will return
0), and we call the registered callback when it happens. This is the
behavior our clients expect (and is consistent with how select(2)
works).
Reviewers: eugene, beanz
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D41008
llvm-svn: 320345
1. Move TaskPool into the namespace lldb_private.
2. Add missing std::move in TaskPoolImpl::Worker.
3. std:🧵:hardware_concurrency may return 0,
handle this case correctly.
Differential revision: https://reviews.llvm.org/D40587
Test plan: make check-all
llvm-svn: 319492
The rationale here is that ArchSpec is used throughout the codebase,
including in places which should not depend on the rest of the code in
the Core module.
This commit touches many files, but most of it is just renaming of
#include lines. In a couple of cases, I removed the #include ArchSpec
line altogether, as the file was not using it. In one or two places,
this necessitated adding other #includes like lldb-private-defines.h.
llvm-svn: 318048
Summary:
In D39387, I was quick to jump to conclusion that ArchSpec has no
external dependencies. It turns there still was one call to
HostInfo::GetArchitecture left -- for implementing the "systemArch32"
architecture and friends.
Since GetAugmentedArchSpec is the place we handle these "incomplete"
triples that don't specify os or vendor and "systemArch" looks very much
like an incomplete triple, I move its handling there.
After this ArchSpec *really* does not have external dependencies, and
I'll move it to the Utility module as a follow-up.
Reviewers: zturner, clayborg, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39896
llvm-svn: 318046
Summary:
This commit removes the concrete_frame_idx member from
NativeRegisterContext and related functions, which was always set to
zero and never used.
I also change the native thread class to store a NativeRegisterContext
as a unique_ptr (documenting the ownership) and make sure it is always
initialized (most of the code was already blindly dereferencing the
register context pointer, assuming it would always be present -- this
makes its treatment consistent).
Reviewers: eugene, clayborg, krytarowski
Subscribers: aemerson, sdardis, nemanjai, javed.absar, arichardson, kristof.beyls, kbarton, uweigand, alexandreyy, lldb-commits
Differential Revision: https://reviews.llvm.org/D39837
llvm-svn: 317881
Summary:
These functions used to return bool to signify whether they were able to
retrieve the data. This is redundant because the ArchSpec and ByteOrder
already have their own "invalid" states, *and* because both of the
current implementations (linux, netbsd) can always provide a valid
result.
This allows us to simplify bits of the code handling these values.
Reviewers: eugene, krytarowski
Subscribers: javed.absar, lldb-commits
Differential Revision: https://reviews.llvm.org/D39733
llvm-svn: 317779
SetOututFileHandle to work with IOBase.
I did make one change after checking with Larry --
I renamed SBDebugger::Flush to FlushDebuggerOutputHandles
and added a short docstring to the .i file to make it
a little clearer under which context programs may need
to use this API.
Differential Revision: https://reviews.llvm.org/D39128
<rdar://problem/34870417>
llvm-svn: 317182
SetOututFileHandle to work with IOBase.
I did make one change after checking with Larry --
I renamed SBDebugger::Flush to FlushDebuggerOutputHandles
and added a short docstring to the .i file to make it
a little clearer under which context programs may need
to use this API.
Differential Revision: https://reviews.llvm.org/D38829
llvm-svn: 317180
Summary:
ArchSpec::SetTriple was taking a Platform as an argument, and used it to
fill in missing pieces of the specified triple. I invert the dependency
by moving this code to other classes. For this purpose, I've created
three new functions.
- HostInfo::GetAugmentedArchSpec: fills in the triple using the host
platform (this used to be implemented by passing a null platform
pointer). By putting this code in the Host module, we can provide a
way to anyone who does not have a platform instance (lldb-server) an
easy way to get Host data.
- Platform::GetAugmentedArchSpec: if you have a platform instance, you
can call this to let it fill in the triple.
- static Platform::GetAugmentedArchSpec: implements the "if platform ==
0 then use_host() else use_platform()" part.
Reviewers: zturner, jingham, clayborg
Subscribers: mgorny, javed.absar, lldb-commits
Differential Revision: https://reviews.llvm.org/D39387
llvm-svn: 316987
Versions of android before kitkat implemented pselect non-atomically,
which caused flakyness, as we were relying on it atomically setting the
signal mask to implement waiting for signals.
This patch implements a direct call to the the pselect kernel syscall,
which does not suffer from this problem. The code itself is not very
pretty, but fortunately the uglyness is contained in the
android version of the MainLoop::RunImpl::Poll function.
llvm-svn: 316915
Summary:
We had a bug where if we had forked (in the ProcessLauncherPosixFork)
while another thread was writing a log message, we would deadlock. This
happened because the fork child inherited the locked log rwmutex, which
would never get unlocked. This meant the child got stuck trying to
disable all log channels.
The bug existed for a while but only started being apparent after
D37930, which started using ThreadLauncher (which uses logging) instead
of std::thread (which does not) for launching TaskPool threads.
The fix is to use pthread_atfork to disable logging in the forked child.
Reviewers: zturner, eugene, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D38938
llvm-svn: 316368
Summary:
The NativeThread class is useless without the containing process (and in
some places it is already assuming the process is always around). This
makes it clear that the NativeProcessProtocol is the object owning the
threads, and makes the destruction order deterministic (first threads,
then process). The NativeProcess is the only thing holding a thread
unique_ptr, and methods that used to hand out thread shared pointers now
return raw pointers or references.
Reviewers: krytarowski, eugene
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D35618
llvm-svn: 316007
This patch adds support for passing an arbitrary python stream
(anything inheriting from IOBase) to SetOutputFileHandle or
SetErrorFileHandle.
Differential revision: https://reviews.llvm.org/D38829
<rdar://problem/34870417>
llvm-svn: 315966
Previously LLDB required the DWP file
to be located next to the executable file.
This diff uses the helper function
Symbols::LocateExecutableSymbolFile to search for
DWP files in the standard locations for debug symbols.
Test plan:
Build a toy test example:
main.cpp
clang -gsplit-dwarf -g -O0 main.cpp -o main.exe
llvm-dwp -e main.exe -o main.exe.dwp
mkdir -p debug_symbols
mv main.exe.dwp debug_symbols/main.exe.dwp
Run lldb:
lldb
settings set target.debug-file-search-paths ./debug_symbols
file ./main.exe
br set --name f
run
Check that debugging works:
setting breakpoints, printing local variables.
Differential revision: https://reviews.llvm.org/D38568
llvm-svn: 315387
Summary:
This allows for the stack size to be configured, which isn't
possible with std::thread. Prevents overflowing the stack when
performing complex operations in the task pool on darwin,
where the default pthread stack size is only 512kb.
This also moves TaskPool from Utility to Host.
Reviewers: labath, tberghammer, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D37930
llvm-svn: 313637
attach by pid worked when running from the directory from which the
target was launched, but failed from a different directory. Use the
kern.proc.pathname sysctl to locate the target, falling back to the
original case of the target's argv[0] if that fails. Based on a patch
from Vignesh Balu.
Differential Revision: https://reviews.llvm.org/D32271
llvm-svn: 312430
The socket bind address should either be localhost or anyaddress. This bug in the listen behavior was preventing lldb-server from opening sockets for non-localhost connections.
The added test verifies that opening an anyaddress socket works and has a non-zero port assignment.
This should resolve PR34183.
llvm-svn: 312008
in a dSYM, and it's a version 2 DBGSourcePathRemapping,
in addition to the build/source paths specified, add
build/source paths with the last two filename components
removed. This more generic remapping can sometimes
help lldb to find the correct source file in complex
projects.
<rdar://problem/33973545>
llvm-svn: 311622
Add explicit linkage to the necessary system libraries in the Host
library. Otherwise, the library fails to build with -Wl,--as-needed.
The system libraries ended up being listed on the linker command-line
before the static libraries needing them, resulting in --as-needed
stripping them.
Listing the dependent libraries explicitly is the canonical way of
declaring libraries in CMake. It guarantees that the system library
dependencies will be correctly propagated to reverse dependencies.
The code used to link libraries reuses existing EXTRA_LIBS variable,
copying code from other parts of LLDB. We might eventually remove
the direct use of system libraries in the programs; however, I would
prefer if we focused on fixing the build regressions in 5.0 branch
first, and went further after the release.
Differential Revision: https://reviews.llvm.org/D36885
llvm-svn: 311354
Summary:
It defined a couple of types (condition_t) which we don't use anymore,
as we have c++11 goodies now. I remove these definitions.
Also it unnecessarily included a couple of headers which weren't
necessary for it's operation. I remove these, and place the includes in
the relevant files (usually .cpp, usually in Host code) which use them.
This allows us to reduce namespace pollution in most of the lldb files
which don't need the OS-specific definitions.
Reviewers: zturner, jingham
Subscribers: ki.stfu, lldb-commits
Differential Revision: https://reviews.llvm.org/D35113
llvm-svn: 308304
Summary:
The usage of shared_from_this forces us to separate construction and
initialization phases, because shared_from_this() is not available in
the constructor (or destructor). The shared semantics are not necessary,
as we always have a clear owner of the native process class
(GDBRemoteCommunicationServerLLDB object). Even if we need shared
semantics in the future (which I think we should strongly avoid),
reverting this will not be necessary -- the owners can still easily
store the native process object in a shared pointer if they really want
to -- this just prevents the knowledge of that from leaking into the
class implementation.
After this a NativeThread object will hold a reference to the parent
process (instead of a weak_ptr) -- having a process instance always
available allows us to simplify some logic in this class (some of it was
already simplified because we were asserting that the process is
available, but this makes it obvious).
Reviewers: krytarowski, eugene, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D35123
llvm-svn: 308282
While adding IPv6 support to debugserver I broke handling wildcard addresses and fully qualified address filtering. This patch resolves that bug and adds a test for matching the address "*".
<rdar://problem/32947613>
llvm-svn: 307957
Store file descriptors from loop.m_read_fds (if FORCE_PSELECT is
defined) and signals from loop.m_signals that need to be processed in
MainLoop::RunImpl::ProcessEvents() into a separate vector and then
iterate over this container to invoke the callbacks.
This prevents a problem where when the code iterated directly over
m_read_fds/m_signals, a callback invoked from within the loop could
modify these variables and invalidate the loop iterator. This would then
result in an assertion failure in llvm::DenseMapIterator::operator++().
Differential Revision: https://reviews.llvm.org/D35298
llvm-svn: 307782
Summary:
This replaces the static functions used for creating
NativeProcessProtocol instances with a factory pattern, and modernizes
the interface of the new class in the process -- I use llvm::Expected
instead of the Status+value combo. I also move some of the common code
(like the Delegate registration into the base class). The new
arrangement has multiple benefits:
- it removes the NativeProcess*** dependency from Process/gdb-remote
(which for example means that liblldb no longer pulls in this code).
- it enables unit testing of the GDBRemoteCommunicationServerLLGS class
(by providing a mock Native Process).
- serves as another example on how to use the llvm::Expected class (I
couldn't get rid of the Initialize-type functions completely here
because of the use of shared_from_this, but that's the next thing on
my list here)
Tests still pass on Linux and I've made sure NetBSD compiles after this.
Reviewers: zturner, eugene, krytarowski
Subscribers: srhines, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D33778
llvm-svn: 307390
Summary:
The classes have no dependencies, and they are used both by lldb and
lldb-server, so it makes sense for them to live in the lowest layers.
Reviewers: zturner, jingham
Subscribers: emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34746
llvm-svn: 306682
Summary:
This patch implements support for Intel(R) Processor Trace
in lldb server. The changes have support for
starting/stopping and reading the trace data. The code
is only available on Linux versions where the perf
attributes for aux buffers are available.
The patch also consists of Unit tests for testing the
core buffer reading function.
Reviewers: lldb-commits, labath, clayborg, zturner, tberghammer
Reviewed By: labath, clayborg
Subscribers: mgorny
Differential Revision: https://reviews.llvm.org/D33674
llvm-svn: 306516
Summary:
It had a dependency on StringConvert and file reading code, which is not
in Utility. I've replaced that code by equivalent llvm operations.
I've added a unit test to demonstrate that parsing a file still works.
Reviewers: zturner, jingham
Subscribers: kubamracek, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34625
llvm-svn: 306394
Summary:
These interfaces have no dependencies, so it makes sense for them to be
in the lowest level modules, to make sure that other parts of the
codebase can use them without introducing loops.
The only exception here is the Connection::CreateDefaultConnection
method, which I've moved to Host, as it instantiates concrete
implementations, and that's where the implementations live.
Reviewers: jingham, zturner
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D34400
llvm-svn: 306391
Summary:
Use c++11 thread_local variables instead. As far as I am aware, they are
supported by all compilers/targets we care about.
Reviewers: zturner, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D34274
llvm-svn: 305779
I was seeing some unlikely errno values here. I am not sure if this will
help, but it nontheless seems like a good idea to stash errno value
before issuing other syscalls.
llvm-svn: 305778
Summary:
A number of places were trying to decode the result of wait(). Add a simple
utility function that does that and a struct that encapsulates the
decoded result. Then also provide a pretty-printer for that class.
Reviewers: zturner, krytarowski, eugene
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D33998
llvm-svn: 305689
Summary:
ProcessLauncherPosix was using posix_spawn for launching the process,
but this function is not available on all platforms we support, and even
where it was avaialable, it did not support the full range of options we
require for launching (most importantly, launching in stop-on-entry
mode). For these reasons, the set of ifdefs around these functions has
grown untractably large, and we were forced to implement our own
launcher from more basic primitives anyway (ProcessLauncherPosixFork --
used on Linux, Android, and NetBSD).
Therefore, I remove this class, and move the relevant parts of the code
to the darwin-specific Host.mm file. This is the platform that code was
originally written for anyway, and it's the only platform where this
implementation makes sense (e.g. the lack of the "thread-specific
working directory" concept makes these functions racy on all other
platforms). This allows us to remove a lot of ifdefs and simplify the
code.
Effectively, the only change this introduces is that FreeBSD will now
use the fork-based launcher instead of posix_spawnp. That sholdn't be a
problem as this approach works at least on one other BSD-based system
already.
Reviewers: krytarowski, emaste, jingham
Subscribers: srhines, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D34236
llvm-svn: 305686
the FileSpec methods for adding/removing file path components instead
of using std::strings; feedback from Sean on the change I added in
r305441.
<rdar://problem/31825940>
llvm-svn: 305547
components to not depend on "." characters in the fileanme
(e.g. "Foundation.framework") but instead to just use path
separators. The names of the files themselves may have dots
in them ("com.apple.sbd") which would break the old scheme.
Also add a test case for this (macosx/find-dsym/bundle-with-dot-in-filename)
as well as a test case for r304520 (macosx/find-dsym/deep-bundle)
which needed a similar setup to test correctly on a single machine.
(both of these are really testing remote debug session situations
where the binary can't be found on the system where lldb is running,
complicating the test case a bit.)
<rdar://problem/31825940>
llvm-svn: 305441
strerror is not thread-safe. llvm's StrError tries hard to retrieve the
string in a thread-safe way and falls back to strerror only if it does
not have another way.
llvm-svn: 304795
lldb: libedit produces garbled, unusable input on Linux
Apply patch from Christos Zoulas, upstream libedit developer.
It has been tested on NetBSD/amd64.
New code supports combination of wide libedit and disabled
LLDB_EDITLINE_USE_WCHAR, which was the popular case on Linux
systems.
llvm-svn: 303907
The Timer destructor would grab a global mutex in order to update
execution time. Add a class to define a category once, statically; the
class adds itself to an atomic singly linked list, and thus subsequent
updates only need to use an atomic rather than grab a lock and perform a
hashtable lookup.
Differential Revision: https://reviews.llvm.org/D32823
Patch by Scott Smith <scott.smith@purestorage.com>.
llvm-svn: 303058
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
Some of the refactoring in r301492 broke UDP socket connections. This is a partial revert of that refactoring. At some point I'll spend more time diagnosing where the refactoring went wrong and how to better clean up this code, but I don't have time to do that today.
llvm-svn: 302282
Summary:
I have found a way to segfault lldb in 7 keystrokes! Steps to reproduce:
1) Launch lldb
2) Type `print` and hit enter. lldb will now prompt you to type a list of
expressions, followed by an empty line.
3) Hit enter, indicating the end of your input.
4) Segfault!
After some investigation, I've found the issue in Host/common/Editline.cpp.
Editline::MoveCursor() relies on m_input_lines not being empty when the `to`
argument is CursorPosition::BlockEnd. This scenario, as far as I can tell,
occurs in one specific instance: In Editline::EndOrAddLineCommand() when the
list of lines being processed contains exactly one string (""). Meeting this
condition is fairly simple, I have posted steps to reproduce above.
Reviewers: krytarowski, zturner, labath
Reviewed By: labath
Subscribers: scott.smith, lldb-commits
Differential Revision: https://reviews.llvm.org/D32421
Patch by Alex Langford.
llvm-svn: 302225
Summary:
This adds a couple of unit tests to the MainLoop class. To get the
kqueue based version of the signal handling passing, I needed to
modify the implementation a bit to make the queue object persistent.
Otherwise, only the signals which are send during the Run call would get
processed, which did not match the ppoll behaviour.
I also took the opportunity to remove the ForEach template functions and
replace them with something more reasonable.
Reviewers: beanz, eugene
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D32753
llvm-svn: 302133
Summary:
It turns out that even though ppoll is available on all the android
devices we support, it does not seem to be working properly on all of
them -- MainLoop just does a busy loop with ppoll returning EINTR and
not making any progress.
This brings back the pselect implementation and makes it available on
android. I could not do any cmake checks for this as the ppoll symbol is
actually avaiable -- it just does not work.
Reviewers: beanz, eugene
Subscribers: srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D32600
llvm-svn: 301636
This just adds a comment to SocketAddress about it being used by debugserver and the implications of that.
If we need to make changes to this class that make it unsuitable for debugserver we can re-implement the minimal abstractions we need from this file in debugserver. I would prefer not to do that because code duplication is bad. Nuff said.
llvm-svn: 301580
before r301492, we could specify "*:1234" as an address to lldb-server
and it would interpret that as "any". I am not sure that's a good idea,
but we have usages of that in the test suite, and without this the
remote test suite fails.
I'm adding that back, as it does not seem it was an intended side-effect
of that change, but I am open to removing it in the future, after
discussion and test suite fixup.
llvm-svn: 301534
This support was landed in r300579, and reverted in r300669 due to failures on the bots.
The failures were caused by sockets not being properly closed, and this updated version of the patches should resolve that.
Summary from the original change:
This patch adds IPv6 support to LLDB/Host's TCP socket implementation. Supporting IPv6 involved a few significant changes to the implementation of the socket layers, and I have performed some significant code cleanup along the way.
This patch changes the Socket constructors for all types of sockets to not create sockets until first use. This is required for IPv6 support because the socket type will vary based on the address you are connecting to. This also has the benefit of removing code that could have errors from the Socket subclass constructors (which seems like a win to me).
The patch also slightly changes the API and behaviors of the Listen/Accept pattern. Previously both Listen and Accept calls took an address specified as a string. Now only listen does. This change was made because the Listen call can result in opening more than one socket. In order to support listening for both IPv4 and IPv6 connections we need to open one AF_INET socket and one AF_INET6 socket. During the listen call we construct a map of file descriptors to addrin structures which represent the allowable incoming connection address. This map removes the need for taking an address into the Accept call.
This does have a change in functionality. Previously you could Listen for connections based on one address, and Accept connections from a different address. This is no longer supported. I could not find anywhere in LLDB where we actually used the APIs in that way. The new API does still support AnyAddr for allowing incoming connections from any address.
The Listen implementation is implemented using kqueue on FreeBSD and Darwin, WSAPoll on Windows and poll(2) everywhere else.
https://reviews.llvm.org/D31823
llvm-svn: 301492
Summary:
the reason for this is two-fold:
- getaddrinfo without the extra arguments will return the same
(network-level) address multiple times, once for each supported
transport protocol, which is not what is usually intended (it certainly
wasn't in D31823)
- it enables us to rewrite the getaddrinfo member function in terms of
the static GetAddressInfo function.
Reviewers: beanz, tberghammer
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32357
llvm-svn: 301168
The break the linux bots (and probably any other machine which would
run the test suite in a massively parallel way). The problem is that it
can happen that we only successfully create an IPv6 listening socket
(because the relevant IPv4 port is used by another process) and then the
connecting side attempts to connect to the IPv4 port and fails.
It's not very obvious how to fix this problem, so I am reverting this
until we come up with a solution.
llvm-svn: 300669
This is not ideal, but it should get the bot going again. I'll need to revisit this if we want to get signal handling working on Windows.
llvm-svn: 300587
Summary:
This patch adds IPv6 support to LLDB/Host's TCP socket implementation. Supporting IPv6 involved a few significant changes to the implementation of the socket layers, and I have performed some significant code cleanup along the way.
This patch changes the Socket constructors for all types of sockets to not create sockets until first use. This is required for IPv6 support because the socket type will vary based on the address you are connecting to. This also has the benefit of removing code that could have errors from the Socket subclass constructors (which seems like a win to me).
The patch also slightly changes the API and behaviors of the Listen/Accept pattern. Previously both Listen and Accept calls took an address specified as a string. Now only listen does. This change was made because the Listen call can result in opening more than one socket. In order to support listening for both IPv4 and IPv6 connections we need to open one AF_INET socket and one AF_INET6 socket. During the listen call we construct a map of file descriptors to addrin structures which represent the allowable incoming connection address. This map removes the need for taking an address into the Accept call.
This does have a change in functionality. Previously you could Listen for connections based on one address, and Accept connections from a different address. This is no longer supported. I could not find anywhere in LLDB where we actually used the APIs in that way. The new API does still support AnyAddr for allowing incoming connections from any address.
The Listen implementation is implemented using kqueue on FreeBSD and Darwin, WSAPoll on Windows and poll(2) everywhere else.
Reviewers: zturner, clayborg
Subscribers: jasonmolenda, labath, lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D31823
llvm-svn: 300579
Summary:
This patch removes the hand maintained config files in favor of auto-generating the config file. We will still need to maintain the defines for the Xcode builds on Mac, but all CMake builds use the generated header instead.
This will enable finer grained platform support tests and enable supporting LLDB on more platforms with less manual maintenance.
I have only tested this patch on Darwin, and any help testing it out on other platforms would be greatly appreciated. I've probably messed something up somewhere.
Reviewers: labath, zturner
Reviewed By: labath
Subscribers: krytarowski, emaste, srhines, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D31969
llvm-svn: 300372
Summary: This patch adds a new wrapper for getaddrinfo which returns a std::vector of SocketAddresses. While this patch doesn't add any uses of the new function, I have two separable patches that are dependent on this, so I put it in its own patch.
Reviewers: zturner
Reviewed By: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D31822
llvm-svn: 300112
Summary:
This replaces old code in Host::GetEnvironment for NetBSD
with the version from Linux. This makes parsing environment
variables correctly. It also fixes programs that depend on the
variables like curses(3) applications.
Long term this function should be moved to Process Plugin,
as currently env variables are not available with remote
debugging.
Other BSDs might want to catch up after this change.
Tested with NetBSD top(1).
Sponsored by <The NetBSD Foundation>
Reviewers: emaste, labath, joerg, kettenis
Reviewed By: emaste
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D31784
llvm-svn: 299783
This adjusts header file includes for headers and source files
in Core. In doing so, one dependency cycle is eliminated
because all the includes from Core to that project were dead
includes anyway. In places where some files in other projects
were only compiling due to a transitive include from another
header, fixups have been made so that those files also include
the header they need. Tested on Windows and Linux, and plan
to address failures on OSX and FreeBSD after watching the
bots.
llvm-svn: 299714
This patch makes adjustments to header file includes in
lldbUtility based on recommendations by the iwyu tool
(include-what-you-use). The goal here is to make sure that
all files include the exact set of headers which are needed
for that file only, to eliminate cases of dead includes (e.g.
someone deleted some code but forgot to delete the header
includes that that code necessitated), and to eliminate the
case where header includes are picked up transitively.
llvm-svn: 299676
both sending and receiving information, instead of using one socket
to send and another to receive. The two socket arrangement fails over
when a firewall is between the two systems.
<rdar://problem/31286757>
llvm-svn: 299608
Summary:
Include initial support for:
- single step mode (PT_STEP)
- single step trap handling (TRAP_TRACE)
- exec() trap (TRAP_EXEC)
- add placeholder interfaces for FPR
- initial code for NetBSD core(5) files
- minor tweaks
While there improve style of altered elf-core/ files.
This code raises the number of passing tests on NetBSD to around 50% (600+/1200+).
The introduced code is subject to improve afterwards for additional features and bug fixes.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg, emaste, kettenis
Reviewed By: labath
Subscribers: srhines, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D31450
llvm-svn: 299109
Summary:
Add basic OpenBSD support. This is enough to be able to analyze core dumps for OpenBSD/amd64, OpenBSD/arm, OpenBSD/arm64 and OpenBSD/i386.
Note that part of the changes to source/Plugins/ObjectFile/ELF/ObjectFileELF.cpp fix a bug that probably affects other platforms as well. The GetProgramHeaderByIndex() interface use 1-based indices, but in some case when looping over the headers the, the loop starts at 0 and misses the last header. This caused problems on OpenBSD since OpenBSD core dumps have the PT_NOTE segment as the last program header.
Reviewers: joerg, labath, krytarowski
Reviewed By: krytarowski
Subscribers: aemerson, emaste, rengolin, srhines, krytarowski, mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D31131
llvm-svn: 298810
This was causing a test failure in one of LLDB's tests which
specifically dealt with a limitation in LLVM's implementation
of home_directory() that LLDB's own implementation had worked
around.
This limitation has been addressed in r298513 on the LLVM side,
so the failing test (which is now unnecessary as the limitation
no longer exists) was removed in r298519, allowing this patch to
be re-submitted without modification.
llvm-svn: 298526
Summary:
NetBSD ships with NativeProcessNetBSD inherited from NativeProcessProtocol.
Link Plugins/Process/gdb-remote with lldbPluginProcessNetBSD in order to resolve
correctly the linking to Launch and Attach from the NetBSD plugin.
Sponsored by <The NetBSD Foundation>
Reviewers: kettenis, labath, emaste, joerg
Reviewed By: labath, emaste
Subscribers: mgorny, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D31231
llvm-svn: 298524
There are only two users of NativeRegisterContextRegisterInfo,
and both are in process plugins. Moving this code from Host
to Plugins/Process/Utility thus makes sense, and as it is the
only dependency from Host -> PluginProcessUtility, it also
breaks this cycle, reducing LLDB's overall cycle count from
45 to 44.
llvm-svn: 298466
In doing so, clean up the MD5 interface a little. Most
existing users only care about the lower 8 bytes of an MD5,
but for some users that care about the upper and lower,
there wasn't a good interface. Furthermore, consumers
of the MD5 checksum were required to handle endianness
details on their own, so it seems reasonable to abstract
this into a nicer interface that just gives you the right
value.
Differential Revision: https://reviews.llvm.org/D31105
llvm-svn: 298322
Summary:
GetAuxvData was causing dependencies from host to target and linux
process modules. It also does not fit netbsd use case, as there we can
only read the auxiliary vector with ptrace, which is better done in the
process plugin, with the other ptrace calls.
I resolve these issues by moving the freebsd and linux versions into the
relevant process plugins. In case of linux, this required adding an
interface in NativeProcessProtocol. The empty definitions on other
platforms can simply be removed.
To get the code compiling I had to add ProcessGdbRemote -> ProcessLinux
dependency, which was not caught before because we depended on it
transitively.
Reviewers: zturner, emaste
Subscribers: srhines, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D31031
llvm-svn: 298066
Summary:
These classes existed only because of the GetName() static function,
which can be moved to a more natural place anyway. I move the linux
version to NativeProcessLinux (and get rid of ProcFileReader), the
freebsd version to ProcessFreeBSD (and fix a bug where it was using the
current process ID, instead of the inferior pid), and remove the NetBSD
version (which was probably incorrect anyway, as it assumes the current
process instead of the inferior.
I also add an llgs test to that verifies thread names are read
correctly.
Reviewers: zturner, krytarowski, emaste
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D30981
llvm-svn: 298058
Summary:
ProcFileReader is the cause of the dependency from Host to ProcessLinux
module. Since it's interface is also obsolete (ReadIntoDataBuffer is
trivially replaceable by llvm::MemoryBuffer functions and
ProcessLineByLine is trivially implementable with StringRefs), instead
of moving it around I'm planning to obliterate it. This is the first
step, where I remove a couple of occurences in linux/Host.cpp, and
modernize some code around that.
I have introduced linux/Support.h, which holds two utility functions
now, whose resposibility is to construct the appropriate proc file names
-- the only useful feature of ProcFileReader.
I add a couple of tests for these functions, and for
Host::GetProcessInfo. It's worth noting that these are the first
host-specific unit tests in lldb.
Reviewers: zturner, eugene
Subscribers: srhines, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D30942
llvm-svn: 297843
Summary:
previously we switched to llvm streams for log output, this completes
the switch for the error streams.
I also clean up the includes and remove the unused argument from
DisableAllLogChannels().
This required adding a bit of boiler plate to convert the output in the
command interpreter, but that should go away when we switch command
results to use llvm streams as well.
Reviewers: zturner, eugene
Subscribers: lldb-commits, emaste
Differential Revision: https://reviews.llvm.org/D30894
llvm-svn: 297812
getpwent is not available on android until API level 21, and even then
it is only available when doing a non-static link. Since android's
concept of users is very different from linux, it's doubtful the home
directory resolution would be useful, so I approximate this state by
just not using getpwent on android.
We've had another getpwent occurance in FileSpec for a while -- it
wasn't causing problems because it was stripped out by the linker, but I
disable that also, for consistency's sake.
llvm-svn: 297612
FileSpec::EnumerateDirectory has a bunch of platform-specific
gunk in it for posix and non-posix platforms. We can get rid
of all this by using LLVM's easy-to-use directory iterators.
Differential Revision: https://reviews.llvm.org/D30807
llvm-svn: 297598
This was originall reverted due to some test failures in
ModuleCache and TestCompDirSymlink. These issues have all
been resolved and the code now passes all tests.
Differential Revision: https://reviews.llvm.org/D30698
llvm-svn: 297300
this reverts r297116 because it breaks the unittests and
TestCompDirSymlink. The ModuleCache unit test is trivially fixable, but
the CompDirSymlink failure is a symptom of a deeper problem: llvm's stat
functionality is not a drop-in replacement for lldb's. The former is
based on stat(2) (which does symlink resolution), while the latter is
based on lstat(2) (which does not).
This also reverts subsequent build fixes (r297128, r297120, 297117) and
r297119 (Remove FileSpec dependency on FileSystem) which builds on top
of this.
llvm-svn: 297139
This deletes LLDB's FileType enumeration and replaces all
users, and all calls to functions that check whether a file
exists etc with corresponding calls to LLVM.
Differential Revision: https://reviews.llvm.org/D30624
llvm-svn: 297116
This functionality is subsumed by DataBufferLLVM, which is
also more efficient since it will try to mmap. However, we
don't yet support mmaping writable private sections, and in
some cases we were using ReadFileContents and then modifying
the buffer. To address that I've added a flag to the
DataBufferLLVM methods that allow you to map privately, which
disables the mmaping path entirely. Eventually we should teach
DataBufferLLVM to use mmap with writable private, but that is
orthogonal to this effort.
Differential Revision: https://reviews.llvm.org/D30622
llvm-svn: 297095
All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.
Differential Revision: https://reviews.llvm.org/D30559
llvm-svn: 296909
This in turn triggered some fallout where other files had
been transitively picking up includes that they needed from
FileSpec.h, so I've fixed those up as well.
llvm-svn: 296855
After a series of patches on the LLVM side to get the mmaping
code up to compatibility with LLDB's needs, it is now ready
to go, which means LLDB's custom mmapping code is redundant.
So this patch deletes it all and uses LLVM's code instead.
In the future, we could take this one step further and delete
even the lldb DataBuffer base class and rely entirely on
LLVM's facilities, but this is a job for another day.
Differential Revision: https://reviews.llvm.org/D30054
llvm-svn: 296159
Summary: QPassSignals package allows lldb client to tell lldb-server to ignore certain types of signals and re-inject them back to inferior without stopping execution.
Reviewers: jmajors, labath
Subscribers: danalbert, srhines, emaste, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D30286
Author: Eugene Zemtsov <ezemtsov@google.com>
llvm-svn: 296101
Summary:
NetBSD 8.0 will ship with accept4(2) in libc wrapping paccept(2).
This change reduces needless difference with other platforms.
Older versions of NetBSD will not be supported.
No functional change.
Sponsored by <The NetBSD Foundation>
Reviewers: joerg, emaste, labath, clayborg
Reviewed By: emaste, labath, clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D30288
llvm-svn: 296070
effects was passed as an expression to assert() calls. If lldb is
built without asserts, the expression was eliminated and we lost
the side effects -- these methods stopped working.
<rdar://problem/30342959>
llvm-svn: 295271
With this patch, the only dependency left is from Utility
to Host. After this is broken, Utility will finally be
standalone.
Differential Revision: https://reviews.llvm.org/D29909
llvm-svn: 295088
and use it in the appropriate log statements.
Formatting of chrono types in log messages was very clunky. This should
make it much nicer to use and give better output. For details of the
formatting options see the chrono formatter in llvm.
llvm-svn: 294738
Instead just rely on LLDB_LOG().
This is part of an effort to sort out dependency hell in LLDB.
Error is in Utility, but Log is in Core. Core can depend on
Utility, but not vice versa. So this patch moves the knowledge
about how to log Errors from the Error class to the Log file.
Differential Revision: https://reviews.llvm.org/D29514
llvm-svn: 294210
Summary:
The std::call_once implementation in libstdc++ has problems on few systems: NetBSD, OpenBSD and Linux PPC. LLVM ships with a homegrown implementation llvm::call_once to help on these platforms.
This change is required in the NetBSD LLDB port. std::call_once with libstdc++ results with crashing the debugger.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg, emaste, mehdi_amini, clayborg
Reviewed By: labath, clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29288
llvm-svn: 294202
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
Summary:
Use ProcessLauncherPosixFork in Linux and NetBSD.
Changes to ProcessLauncherLinux:
- Limit personality.h and ASLR code to Linux.
- Reuse portable ptrace(2) PT_TRACE_ME operation available on Linux and BSDs.
- Limit ETXTBSY error path from execve(2) to Linux.
- In LaunchProcess declaration change virtual to override.
This code should be readily available for FreeBSD.
Sponsored by <The NetBSD Foundation>
Reviewers: joerg, clayborg, labath, emaste
Reviewed By: labath
Subscribers: danalbert, srhines, mgorny, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29347
llvm-svn: 293768
Summary:
This patch adds accurate dependency specifications to the mail LLDB libraries and tools.
In all cases except lldb-server, these dependencies are added in addition to existing dependencies (making this low risk), and I performed some code cleanup along the way.
For lldb-server I've cleaned up the LLVM dependencies down to just the minimum actually required. This is more than lldb-server actually directly references, and I've left a todo in the code to clean that up.
Reviewers: labath, zturner
Subscribers: lldb-commits, danalbert, srhines, ki.stfu, mgorny, jgosnell
Differential Revision: https://reviews.llvm.org/D29333
llvm-svn: 293686
Summary:
To retrieve the native thread ID there must be called _lwp_self().
Sponsored by <The NetBSD Foundation>
Reviewers: joerg, clayborg, emaste, labath
Reviewed By: joerg, clayborg, labath
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29264
llvm-svn: 293625
Summary:
Remove dependency on the proc (/proc) filesystem, which is optional.
KERN_PROC_PATHNAME is available in NetBSD-current and will land NetBSD 8.0.
Older stable versions of NetBSD will not be supported.
Sponsored by <The NetBSD Foundation>
Reviewers: emaste, joerg, labath, clayborg
Reviewed By: clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29089
llvm-svn: 293392
This moves the accept hack from the android toolchain file into
LLDBConfig.cmake. This allows successful lldb android compilation
without relying on our custom toolchain file.
llvm-svn: 293281
It turns out things are not as simple as I hoped. sys/personality.h
exists on all androids but it does not define the required symbols on
all platform levels.
Add a compile check for platform level to compile against both new and
old android headers.
llvm-svn: 292939
On android API level 9 the header does not get included transitively.
Include it directly.
As far as I can see, all non-windows platforms should have this header.
If that turns out to be incorrect, we can add some ifdefs around that.
llvm-svn: 292931
Summary:
getcwd() is not available (well.. um.. deprecated?) on windows, and the way
PosixApi.h is providing it causes strange compile errors when it's included in
the wrong order. The best way to avoid that is to just not use chdir.
This replaces all uses of getcwd in generic code. There are still a couple of
more uses, but these are in platform-specific code.
chdir() is causing a similar problem, but for that there is no llvm equivalent
for that (yet).
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D28858
llvm-svn: 292795
Jason Molenda