In some cases it is desirable to match the same pattern repeatedly
many times. Currently the only way to do it is to copy the same
check pattern as many times as needed. And that gets pretty unwieldy
when its more than count is big.
Introducing CHECK-COUNT-<num> directive which acts like a plain CHECK
directive yet matches the same pattern exactly <num> times.
Extended FileCheckType to a struct to add Count there.
Changed some parsing routines to handle non-fixed length of directive
(all currently existing directives were fixed-length).
The code is generic enough to allow future support for COUNT in more
than just PlainCheck directives.
See motivating example for this feature in reviews.llvm.org/D54223.
Reviewed By: chandlerc, dblaikie
Differential Revision: https://reviews.llvm.org/D54336
llvm-svn: 346722
This feature makes it easy to tune FileCheck diagnostic output when
running the test suite via ninja, a bot, or an IDE. For example:
```
$ FILECHECK_OPTS='-color -v -dump-input-on-failure' \
LIT_FILTER='OpenMP/for_codegen.cpp' ninja check-clang \
| less -R
```
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D53517
llvm-svn: 346272
(Relands r344930, reverted in r344935, and now hopefully fixed for
Windows.)
While this change specifically targets FileCheck, it affects any tool
using the same SourceMgr facilities.
Previously, -color was documented in FileCheck's -help output, but
-color had no effect. Now, -color obeys its documentation: it forces
colors to be used in FileCheck diagnostics even when stderr is not a
terminal.
-color is especially helpful when combined with FileCheck's -v, which
can produce a long series of diagnostics that you might wish to pipe
to a pager, such as less -R. The WithColor extensions here will also
help to clean up color usage in FileCheck's annotated dump of input,
which is proposed in D52999.
Reviewed By: JDevlieghere, zturner
Differential Revision: https://reviews.llvm.org/D53419
llvm-svn: 345202
While this change specifically targets FileCheck, it affects any tool
using the same SourceMgr facilities.
Previously, -color was documented in FileCheck's -help output, but
-color had no effect. Now, -color obeys its documentation: it forces
colors to be used in FileCheck diagnostics even when stderr is not a
terminal.
-color is especially helpful when combined with FileCheck's -v, which
can produce a long series of diagnostics that you might wish to pipe
to a pager, such as less -R. The WithColor extensions here will also
help to clean up color usage in FileCheck's annotated dump of input,
which is proposed in D52999.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D53419
llvm-svn: 344930
-v prints all directive pattern matches.
-vv additionally prints info that might be noise to users but that can
be helpful to FileCheck developers.
To maximize code reuse and to make diagnostics more consistent, this
patch also adjusts and extends some of the existing diagnostics.
CHECK-NOT failures now report variables uses. Many more diagnostics
now report the check prefix and kind of directive.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D47114
llvm-svn: 336967
That is, make CHECK-DAG skip matches that overlap the matches of any
preceding consecutive CHECK-DAG directives. This change makes
CHECK-DAG more consistent with other directives, and there is evidence
it makes CHECK-DAG more intuitive and less error-prone. See the RFC
discussion starting at:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123010.html
Moreover, this behavior enables CHECK-DAG groups for unordered,
non-unique strings or patterns. For example, it is useful for
verifying output or logs from a parallel program, such as the OpenMP
runtime.
This patch also implements the command-line option
-allow-deprecated-dag-overlap, which reverts CHECK-DAG to the old
overlapping behavior. This option should not be used in new tests.
It is meant only for the existing tests that are broken by this change
and that need time to update.
See the following bugzilla issue for tracking of such tests:
https://bugs.llvm.org/show_bug.cgi?id=37532
Patches to add -allow-deprecated-dag-overlap to those tests will
follow immediately.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D47106
llvm-svn: 336847
That is, make CHECK-DAG skip matches that overlap the matches of any
preceding consecutive CHECK-DAG directives. This change makes
CHECK-DAG more consistent with other directives, and there is evidence
it makes CHECK-DAG more intuitive and less error-prone. See the RFC
discussion starting at:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123010.html
Moreover, this behavior enables CHECK-DAG groups for unordered,
non-unique strings or patterns. For example, it is useful for
verifying output or logs from a parallel program, such as the OpenMP
runtime.
This patch also implements the command-line option
-allow-deprecated-dag-overlap, which reverts CHECK-DAG to the old
overlapping behavior. This option should not be used in new tests.
It is meant only for the existing tests that are broken by this change
and that need time to update.
See the following bugzilla issue for tracking of such tests:
https://bugs.llvm.org/show_bug.cgi?id=37532
Patches to add -allow-deprecated-dag-overlap to those tests will
follow immediately.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D47106
llvm-svn: 336830
Prior to this change, there was no clean way of getting FileCheck to
check that a line is completely empty. The expected way of using
"CHECK: {{^$}}" does not work because the '^' matches the end of the
previous match (this behaviour may be desirable in certain instances).
For the same reason, "CHECK-NEXT: {{^$}}" will fail when the previous
match was at the end of the line, as the pattern will match there.
Using the recommended [[:space:]] to match an explicit new line could
also match a space, and thus is not always desired. Literal '\n'
matches also do not work. A workaround was suggested in the review, but
it is a little clunky.
This change adds a new directive that behaves the same as CHECK-NEXT,
except that it only matches against empty lines (nothing, not even
whitespace, is allowed). As with CHECK-NEXT, it will fail if more than
one newline occurs before the next blank line. Example usage:
; test.txt
foo
bar
; CHECK: foo
; CHECK-EMPTY:
; CHECK-NEXT: bar
Differential Revision: https://reviews.llvm.org/D28896
Reviewed by: probinson
llvm-svn: 335613
Summary:
This makes it very easy to test files that only differ in a constant
value somewhere in the test case.
Reviewers: jlebar, hfinkel, chandlerc, probinson
Reviewed By: probinson
Subscribers: probinson, llvm-commits
Differential Revision: https://reviews.llvm.org/D39629
llvm-svn: 317572
Minor doc update that the FileCheck matcher supports POSIX ERE.
It also fixes a minor issue in the regexp describing a variable
name: underscores are allowed too.
Differential Revision: https://reviews.llvm.org/D38787
llvm-svn: 315679
If `--enable-var-scope` is in effect, variables with names that
start with `$` are considered to be global. All other variables are
local. All local variables get undefined at the beginning of each
CHECK-LABEL block. Global variables are not affected by CHECK-LABEL.
This makes it easier to ensure that individual tests are not affected
by variables set in preceding tests.
Differential Revision: https://reviews.llvm.org/D30749
llvm-svn: 297396
Lots of blocks had "llvm" or "nasm" syntax types but either weren't following
the syntax, or the syntax has changed (and sphinx hasn't keep up) or the type
doesn't even exist (nasm?).
Other documents had :options: what were invalid. I only removed those that had
warnings, and left the ones that didn't, in order to follow the principle of
least surprise.
This is like this for ages, but the buildbot is now failing on errors. It may
take a while to upgrade the buildbot's sphinx, if that's even possible, but
that shouldn't stop us from getting docs updates (which seem down for quite
a while).
Also, we're not losing any syntax highlight, since when it doesn't parse, it
doesn't colour. Ie. those blocks are not being highlighted anyway.
I'm trying to get all docs in one go, so that it's easy to revert later if we
do fix, or at least easy to know what's to fix.
llvm-svn: 276109
Finish off PR23080 by renaming the debug info IR constructs from `MD*`
to `DI*`. The last of the `DIDescriptor` classes were deleted in
r235356, and the last of the related typedefs removed in r235413, so
this has all baked for about a week.
Note: If you have out-of-tree code (like a frontend), I recommend that
you get everything compiling and tests passing with the *previous*
commit before updating to this one. It'll be easier to keep track of
what code is using the `DIDescriptor` hierarchy and what you've already
updated, and I think you're extremely unlikely to insert bugs. YMMV of
course.
Back to *this* commit: I did this using the rename-md-di-nodes.sh
upgrade script I've attached to PR23080 (both code and testcases) and
filtered through clang-format-diff.py. I edited the tests for
test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns
were off-by-three. It should work on your out-of-tree testcases (and
code, if you've followed the advice in the previous paragraph).
Some of the tests are in badly named files now (e.g.,
test/Assembler/invalid-mdcompositetype-missing-tag.ll should be
'dicompositetype'); I'll come back and move the files in a follow-up
commit.
llvm-svn: 236120
Summary:
Add FileCheck -implicit-check-not option which allows specifying a
pattern that should only occur in the input when explicitly matched by a
positive check. This feature allows checking tool diagnostics in a way
clang -verify does it for compiler diagnostics.
The option has been tested on a number of clang-tidy checks, I'll post a link to
the clang-tidy patch to this thread.
Once there's an agreement on the general direction, I can add tests and
documentation.
Reviewers: djasper, bkramer
Reviewed By: bkramer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4462
llvm-svn: 212810
CHECK-LABEL is meant to be used in place on CHECK on lines containing identifiers or other unique labels (they need not actually be labels in the source or output language, though.) This is used to break up the input stream into separate blocks delineated by CHECK-LABEL lines, each of which is checked independently. This greatly improves the accuracy of errors and fix-it hints in many cases, and allows for FileCheck to recover from errors in one block by continuing to subsequent blocks.
Some tests will be converted to use this new directive in forthcoming patches.
llvm-svn: 186162
Fedor Sergeev