GNU as and Darwin give the various binary operators different
precedence. LLVM's MC supported the Darwin semantics but not the GNU
semantics.
This fixes PR25311.
llvm-svn: 251271
We didn't validate that the .word directive was given a sane value,
leading to crashes when we attempt to write out the object file.
Instead, perform some validation and issue a diagnostic pointing at the
start of the diagnostic.
llvm-svn: 251270
When the target does not support these intrinsics they should be converted to a chain of scalar load or store operations.
If the mask is not constant, the scalarizer will build a chain of conditional basic blocks.
I added isLegalMaskedGather() isLegalMaskedScatter() APIs.
Differential Revision: http://reviews.llvm.org/D13722
llvm-svn: 251237
When using the MCU psABI, compiler-generated library calls should pass
some parameters in-register. However, since inreg marking for x86 is currently
done by the front end, it will not be applied to backend-generated calls.
This is a workaround for PR3997, which describes a similar issue for -mregparm.
Differential Revision: http://reviews.llvm.org/D13977
llvm-svn: 251223
We don't need a mask of a rotation result to be a constant splat - any constant scalar/vector can be usefully folded.
Followup to D13851.
llvm-svn: 251197
This patch adds support for lowering to the XOP VPROT / VPROTI vector bit rotation instructions.
This has required changes to the DAGCombiner rotation pattern matching to support vector types - so far I've only changed it to support splat vectors, but generalising this further is feasible in the future.
Differential Revision: http://reviews.llvm.org/D13851
llvm-svn: 251188
First, the motivation: LLVM currently does not realize that:
((2072 >> (L == 0)) >> 7) & 1 == 0
where L is some arbitrary value. Whether you right-shift 2072 by 7 or by 8, the
lowest-order bit is always zero. There are obviously several ways to go about
fixing this, but the generic solution pursued in this patch is to teach
computeKnownBits something about shifts by a non-constant amount. Previously,
we would give up completely on these. Instead, in cases where we know something
about the low-order bits of the shift-amount operand, we can combine (and
together) the associated restrictions for all shift amounts consistent with
that knowledge. As a further generalization, I refactored all of the logic for
all three kinds of shifts to have this capability. This works well in the above
case, for example, because the dynamic shift amount can only be 0 or 1, and
thus we can say a lot about the known bits of the result.
This brings us to the second part of this change: Even when we know all of the
bits of a value via computeKnownBits, nothing used to constant-fold the result.
This introduces the necessary code into InstCombine and InstSimplify. I've
added it into both because:
1. InstCombine won't automatically pick up the associated logic in
InstSimplify (InstCombine uses InstSimplify, but not via the API that
passes in the original instruction).
2. Putting the logic in InstCombine allows the resulting simplifications to become
part of the iterative worklist
3. Putting the logic in InstSimplify allows the resulting simplifications to be
used by everywhere else that calls SimplifyInstruction (inlining, unrolling,
and many others).
And this requires a small change to our definition of an ephemeral value so
that we don't break the rest case from r246696 (where the icmp feeding the
@llvm.assume, is also feeding a br). Under the old definition, the icmp would
not be considered ephemeral (because it is used by the br), but this causes the
assume to remove itself (in addition to simplifying the branch structure), and
it seems more-useful to prevent that from happening.
llvm-svn: 251146
After some look-ahead PRE was added for GEPs, an instruction could end
up in the table of candidates before it was actually inspected. When
this happened the pass might decide it was the best candidate to
replace itself. This didn't go well.
Should fix PR25291
llvm-svn: 251145
Summary:
This change teaches the LLVM inliner to not inline through callsites
with unknown operand bundles. Currently all operand bundles are
"unknown" operand bundles but in the near future we will add support for
inlining through some select kinds of operand bundles.
Reviewers: reames, chandlerc, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14001
llvm-svn: 251141
Summary:
The logic here isn't straightforward because our support for
TargetOptions::GuaranteedTailCallOpt.
Also fix a bug where we were allowing tail calls to cdecl functions from
fastcall and vectorcall functions. We were special casing thiscall and
stdcall callers rather than checking for any convention that requires
clearing stack arguments before returning.
Reviewers: hans
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14024
llvm-svn: 251137
Summary:
When ARMFrameLowering::emitPopInst generates a "pop" instruction to restore the callee saved registers, it checks if the LR register is among them. If so, the function may decide to remove the basic block's terminator and replace it with a "pop" to the PC register instead of LR.
This leads to a problem when the block's terminator is preceded by a "llvm.debugtrap" call. The MI iterator points to the trap in such a case, which is also a terminator. If the function decides to restore LR to PC, it erroneously removes the trap.
Reviewers: asl, rengolin
Subscribers: aemerson, jfb, rengolin, dschuff, llvm-commits
Differential Revision: http://reviews.llvm.org/D13672
llvm-svn: 251123
Summary:
This ensures that BranchFolding (and similar) won't remove these blocks.
Also allow AsmPrinter::EmitBasicBlockStart to process MBBs which are
address-taken but do not have BBs that are address-taken, since otherwise
its call to getAddrLabelSymbolTableToEmit would fail an assertion on such
blocks. I audited the other callers of getAddrLabelSymbolTableToEmit
(and getAddrLabelSymbol); they all have BBs known to be address-taken
except for the call through getAddrLabelSymbol from
WinException::create32bitRef; that call is actually now unreachable, so
I've removed it and updated the signature of create32bitRef.
This fixes PR25168.
Reviewers: majnemer, andrew.w.kaylor, rnk
Subscribers: pgavlin, llvm-commits
Differential Revision: http://reviews.llvm.org/D13774
llvm-svn: 251113
If the loaded type sizes don't match the element type of the sequential type, all bets are off and the addresses may, indeed, overlap.
Surprisingly, this just got caught in one test, on one builder, out of the 30+ builders testing this change. Congratulations go to http://lab.llvm.org:8011/builders/clang-aarch64-lnt/builds/5205.
llvm-svn: 251112
Also adds a 'trivial' ELF file. This was generated by assembling
and linking a file with the symbol main which contains a single
return instruction.
llvm-svn: 251096
Summary: Currently SimplifyResume can convert an invoke instruction to a call instruction if its landing pad is trivial. In practice we could have several invoke instructions with trivial landing pads and share a common rethrow block, and in the common rethrow block, all the landing pads join to a phi node. The patch extends SimplifyResume to check the phi of landing pad and their incoming blocks. If any of them is trivial, remove it from the phi node and convert the invoke instruction to a call instruction.
Reviewers: hfinkel, reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13718
llvm-svn: 251061
The test case wasn't testing what it was commented to be testing; and
when I tried to fix the test I noticed that SCEV does not support the
simplification that the test was supposed to test.
This change removes the test case to avoid confusion.
llvm-svn: 251053
Summary:
An unsigned comparision is equivalent to is corresponding signed version
if both the operands being compared are positive. Teach SCEV to use
this fact when profitable.
Reviewers: atrick, hfinkel, reames, nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13687
llvm-svn: 251051
Summary:
- A s< (A + C)<nsw> if C > 0
- A s<= (A + C)<nsw> if C >= 0
- (A + C)<nsw> s< A if C < 0
- (A + C)<nsw> s<= A if C <= 0
Right now `C` needs to be a constant, but we can later generalize it to
be a non-constant if needed.
Reviewers: atrick, hfinkel, reames, nlewycky
Subscribers: sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D13686
llvm-svn: 251050
Summary:
This uses `ScalarEvolution::getRange` and not potentially control
dependent `nsw` and `nuw` bits on the arithmetic instruction.
Reviewers: atrick, hfinkel, nlewycky
Subscribers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D13613
llvm-svn: 251048
* Don't instrument promotable dynamic allocas:
We already have a test that checks that promotable dynamic allocas are
ignored, as well as static promotable allocas. Make sure this test will
still pass if/when we enable dynamic alloca instrumentation by default.
* Handle lifetime intrinsics before handling dynamic allocas:
lifetime intrinsics may refer to dynamic allocas, so we need to emit
instrumentation before these dynamic allocas would be replaced.
Differential Revision: http://reviews.llvm.org/D12704
llvm-svn: 251045
When we fold "mul ((add x, c1), c1)" -> "add ((mul x, c2), c1*c2)", we bail if (add x, c1) has multiple
users which would result in an extra add instruction.
In such cases, this patch adds a check to see if we can eliminate a multiply instruction in exchange for the extra add.
I also added the capability of doing the existing optimization with non-splatted vectors (splatted also works).
Differential Revision: http://reviews.llvm.org/D13740
llvm-svn: 251028
PR24686 identifies a problem where a relocation expression is invalid
when not all of the symbols in the expression can be locally
resolved. This causes the compiler to request a PC-relative half16ds
relocation, which is nonsensical for PowerPC. This patch recognizes
this situation and ensures we fail the assembly cleanly.
Test case provided by Anton Blanchard.
llvm-svn: 251027
Summary:
Hyphens were missing from the triple, causing it to be parsed
incorrectly. This patch updates the triple and makes necessary
changes to the expected output.
Patch is from Vinicius Tinti.
Reviewers: ab, tinti
Subscribers: srhines, llvm-commits
Differential Revision: http://reviews.llvm.org/D13792
llvm-svn: 251020
Instead of bailing out when we see loads, analyze them. If we can prove that the loaded-from address must escape, then we can conclude that a load from that address must escape too and therefore cannot alias a non-addr-taken global.
When checking if a Value can alias a non-addr-taken global, if the Value is a LoadInst of a non-global, recurse instead of bailing.
If we can follow a trail of loads up to some base that is captured, we know by inference that all the loads we followed are also captured.
llvm-svn: 251017
If the final indices of two GEPs can be proven to not be equal, and
the GEP is of a SequentialType (not a StructType), then the two GEPs
do not alias.
llvm-svn: 251016
isKnownNonEqual(A, B) returns true if it can be determined that A != B.
At the moment it only knows two facts, that a non-wrapping add of nonzero to a value cannot be that value:
A + B != A [where B != 0, addition is nsw or nuw]
and that contradictory known bits imply two values are not equal.
This patch also hooks this up to InstSimplify; InstSimplify had a peephole for the first fact but not the second so this teaches InstSimplify a new trick too (alas no measured performance impact!)
llvm-svn: 251012
Summary:
If a `CallSite` has operand bundles, then do not peek into the called
function to get a more precise `ModRef` answer.
This is tested using `argmemonly`, `-basicaa` and `-gvn`; but the
functionality is not specific to any of these.
Depends on D13961
Reviewers: reames, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13962
llvm-svn: 250974
Summary:
This makes attribute accessors on `CallInst` and `InvokeInst` do the
(conservatively) right thing. This essentially involves, in some
cases, *not* falling back querying the attributes on the called
`llvm::Function` when operand bundles are present.
Attributes locally present on the `CallInst` or `InvokeInst` will still
override operand bundle semantics. The LangRef has been amended to
reflect this. Note: this change does not do anything prevent
`-function-attrs` from inferring `CallSite` local attributes after
inspecting the called function -- that will be done as a separate
change.
I've used `-adce` and `-early-cse` to test these changes. There is
nothing special about these passes (and they did not require any
changes) except that they seemed be the easiest way to write the tests.
This change does not add deal with `argmemonly`. That's a later change
because alias analysis requires a related fix before `argmemonly` can be
tested.
Reviewers: reames, chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13961
llvm-svn: 250973
These were the cause of a verifier error when building 7zip with
-verify-machineinstrs. Running 'make check' with the verifier
triggered the same error on the test here so i've updated the test
to run the verifier on one of its runs instead of adding a new one.
While looking at this code, there was a stale comment that these
instructions were only used for disassembly. This probably used to
be the case, but they are now used in the 'ARM load / store optimization pass' too.
This reapplies r242300 which was reverted in r242428 due to bot failures.
Ultimately those failures were spurious and completely unrelated to this commit. I reverted this
at the time because it was thought to be at fault.
llvm-svn: 250969
There may be other use operands that also need their kill flags cleared.
This happens in a few tests when SIFoldOperands is moved after
PeepholeOptimizer.
PeepholeOptimizer rewrites cases that look like:
%vreg0 = ...
%vreg1 = COPY %vreg0
use %vreg1<kill>
%vreg2 = COPY %vreg0
use %vreg2<kill>
to use the earlier source to
%vreg0 = ...
use %vreg0
use %vreg0
Currently SIFoldOperands sees the copied registers, so there is
only one use. So far I haven't managed to come up with a test
that currently has multiple uses of a foldable VGPR -> VGPR copy.
llvm-svn: 250960
Summary: ELF's STT_File symbols may overlap with regular globals in
other files, so we should ignore them here in order to avoid having
bogus entries in the symbol table that confuse us when resolving relocations.
Reviewers: lhames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13888
llvm-svn: 250942
SimplifyTerminatorOnSelect didn't consider the possibility that the
condition might be related to one of PHI nodes.
This fixes PR25267.
llvm-svn: 250922
in the size field in the archive header for the member is not a number. To do this we
have all of the needed methods return ErrorOr to push them up until we get out of lib.
Then the tools and can handle the error in whatever way is appropriate for that tool.
So the solution is to plumb all the ErrorOr stuff through everything that touches archives.
This include its iterators as one can create an Archive object but the first or any other
Child object may fail to be created due to a bad size field in its header.
Thanks to Lang Hames on the changes making child_iterator contain an
ErrorOr<Child> instead of a Child and the needed changes to ErrorOr.h to add
operator overloading for * and -> .
We don’t want to use llvm_unreachable() as it calls abort() and is produces a “crash”
and using report_fatal_error() to move the error checking will cause the program to
stop, neither of which are really correct in library code. There are still some uses of
these that should be cleaned up in this library code for other than the size field.
Also corrected the code where the size gets us to the “at the end of the archive”
which is OK but past the end of the archive will return object_error::parse_failed now.
The test cases use archives with text files so one can see the non-digit character,
in this case a ‘%’, in the size field.
llvm-svn: 250906
Summary:
Previously, we were inserting an InlineAsm statement for each line of the
inline assembly. This works for GAS but it triggers prologue/epilogue
emission when IAS is in use. This caused:
.set noreorder
.cpload $25
to be emitted as:
.set push
.set reorder
.set noreorder
.set pop
.set push
.set reorder
.cpload $25
.set pop
which led to assembler errors and caused the test to fail.
The whitespace-after-comma changes included in this patch are necessary to
match the output when IAS is in use.
Reviewers: vkalintiris
Subscribers: rkotler, llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13653
llvm-svn: 250895
When we have to convert the masked.load, masked.store to scalar code, we generate a chain of conditional basic blocks.
I added optimization for constant mask vector.
Differential Revision: http://reviews.llvm.org/D13855
llvm-svn: 250893
Summary:
The forwards compatibility strategy employed by MIPS is to consider registers
to be infinitely sign-extended. Then on ISA's with a wider register, the result
of existing instructions are sign-extended to register width and zero-extended
counterparts are added. copy_u.w on MSA32 and copy_u.w on MSA64 violate this
strategy and we have therefore corrected the MSA specs to fix this.
We still keep track of sign/zero-extension during legalization but we now
match copy_s.[wd] where required.
No change required to clang since __builtin_msa_copy_u_[wd] will map to
copy_s.[wd] where appropriate for the target.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13472
llvm-svn: 250887
A mem-to-mem instruction (that both loads and stores), which store to an
FI, cannot pass the verifier since it thinks it is loading from the FI.
For the mem-to-mem instruction, do a looser check in visitMachineOperand()
and only check liveness at the reg-slot while analyzing a frame index operand.
Needed to make CodeGen/SystemZ/xor-01.ll pass with -verify-machineinstrs,
which now runs with this flag.
Reviewed by Evan Cheng and Quentin Colombet.
llvm-svn: 250885
Do not tail duplicate blocks where the successor has a phi node,
and the corresponding value in that phi node uses a subregister.
http://reviews.llvm.org/D13922
llvm-svn: 250877
C/C++ code can declare an extern function, which will show up as an import in WebAssembly's output. It's expected that the linker will resolve these, and mark unresolved imports as call_import (I have a patch which does this in wasmate).
llvm-svn: 250875
In some cases (as illustrated in the unittest), lineno can be less than the heade_lineno because the function body are included from some other files. In this case, offset will be negative. This patch makes clang still able to match the profile to IR in this situation.
http://reviews.llvm.org/D13914
llvm-svn: 250873
Summary:
TargetLoweringBase::Expand is defined as "Try to expand this to other ops,
otherwise use a libcall." For ISD::UDIV and ISD::SDIV, the choice between
the two possibilities was defined in a rather convoluted way:
- if DIVREM is legal, expand to DIVREM
- if DIVREM has a custom lowering, expand to DIVREM
- if DIVREM libcall is defined and a remainder from the same division is
computed elsewhere, expand to a DIVREM libcall
- else, expand to a DIV libcall
This had the undesirable effect that if both DIV and DIVREM are implemented
as libcalls, then ISD::UDIV and ISD::SDIV are expanded to the heavier DIVREM
libcall, even when the remainder isn't used.
The new code adds a new LegalizeAction, TargetLoweringBase::LibCall, so that
backends can directly control whether they prefer an expansion or a conversion
to a libcall. This makes the generic lowering code even more generic,
allowing its reuse in a wider range of target-specific configurations.
The useful effect is that ARM backend will now generate a call
to __aeabi_{i,u}div rather than __aeabi_{i,u}divmod in cases where
it doesn't need the remainder. There's no functional change outside
the ARM backend.
Reviewers: t.p.northover, rengolin
Subscribers: t.p.northover, llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D13862
llvm-svn: 250826
The mask value type for maskload/maskstore GCC builtins is never a vector of
packed floats/doubles.
This patch fixes the following issues:
1. The mask argument for builtin_ia32_maskloadpd and builtin_ia32_maskstorepd
should be of type llvm_v2i64_ty and not llvm_v2f64_ty.
2. The mask argument for builtin_ia32_maskloadpd256 and
builtin_ia32_maskstorepd256 should be of type llvm_v4i64_ty and not
llvm_v4f64_ty.
3. The mask argument for builtin_ia32_maskloadps and builtin_ia32_maskstoreps
should be of type llvm_v4i32_ty and not llvm_v4f32_ty.
4. The mask argument for builtin_ia32_maskloadps256 and
builtin_ia32_maskstoreps256 should be of type llvm_v8i32_ty and not
llvm_v8f32_ty.
Differential Revision: http://reviews.llvm.org/D13776
llvm-svn: 250817
This wasn't doing anything useful. They weren't explicitly used
anywhere, and the RegScavenger ignores reserved registers.
This for some reason caused a random scheduling change in the test.
Getting the check lines to pass is too frustrating, and there's probably
not too much value in checking the vector case's operands N times.
llvm-svn: 250794
`normalizeForInvokeSafepoint` in RewriteStatepointsForGC.cpp, as it is
written today, deals with `gc.relocate` and `gc.result` uses of a
statepoint equally well. This change documents this fact and adds a
test case.
There is no functional change here -- only documentation of existing
functionality.
llvm-svn: 250784
Currently, in MachineBlockPlacement pass the loop is rotated to let the best exit to be the last BB in the loop chain, to maximize the fall-through from the loop to outside. With profile data, we can determine the cost in terms of missed fall through opportunities when rotating a loop chain and select the best rotation. Basically, there are three kinds of cost to consider for each rotation:
1. The possibly missed fall through edge (if it exists) from BB out of the loop to the loop header.
2. The possibly missed fall through edges (if they exist) from the loop exits to BB out of the loop.
3. The missed fall through edge (if it exists) from the last BB to the first BB in the loop chain.
Therefore, the cost for a given rotation is the sum of costs listed above. We select the best rotation with the smallest cost. This is only for PGO mode when we have more precise edge frequencies.
Differential revision: http://reviews.llvm.org/D10717
llvm-svn: 250754
Allow LLVM to optimize the sequence like the following:
%inc = add nsw i32 %i, 1
%cmp = icmp slt %n, %inc
into:
%cmp = icmp sle i32 %n, %i
The case is not handled previously due to the complexity of compuation of %n.
Hence, LLVM cannot swap operands of icmp accordingly.
llvm-svn: 250746
This was originally checked in at r250527, but reverted at r250570 because of PR25222.
There were at least 2 problems:
1. The cost check was checking for an instruction with an exact cost of TCC_Expensive;
that should have been >=.
2. The cause of the clang stage 1 failures was illegally sinking 'call' instructions;
we can't sink instructions that may have side effects / are not safe to execute speculatively.
Fixed those conditions in sinkSelectOperand() and added test cases.
Original commit message:
This is a follow-up to the discussion in D12882.
Ideally, we would like SimplifyCFG to be able to form select instructions even when the operands
are expensive (as defined by the TTI cost model) because that may expose further optimizations.
However, we would then like a later pass like CodeGenPrepare to undo that transformation if the
target would likely benefit from not speculatively executing an expensive op (this patch).
Once we have this safety mechanism in place, we can adjust SimplifyCFG to restore its
select-formation behavior that changed with r248439.
Differential Revision: http://reviews.llvm.org/D13297
llvm-svn: 250743
Convert two halfword loads into a single 32-bit word load with bitfield extract
instructions. For example :
ldrh w0, [x2]
ldrh w1, [x2, #2]
becomes
ldr w0, [x2]
ubfx w1, w0, #16, #16
and w0, w0, #ffff
llvm-svn: 250719
Emit the CFI instructions after all code transformation have been done.
This will avoid any interference between CFI instructions and packetization.
llvm-svn: 250714
Summary:
This patch adds support to llvm-lto that mirrors the support added by
r249270 to the gold plugin. This enables better testing of combined
index generation for ThinLTO.
Added a new test, and this support will be used in the test in D13515.
Reviewers: joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13847
llvm-svn: 250699
The mapping of these two intrinsics in ARMInstrInfo.td had a small
omission which lead to their operands not being validated/transformed
before being lowered into usat and ssat instructions. This can cause
incorrect instructions to be emitted.
I've also added tests for the remaining two saturating arithmatic
intrinsics @llvm.arm.qadd and @llvm.arm.qsub as they are missing
codegen tests.
llvm-svn: 250697
Add FastISel support for SSE4A scalar float / double non-temporal stores
Follow up to D13698
Differential Revision: http://reviews.llvm.org/D13773
llvm-svn: 250610
This patch improves support for combining the SSE4A EXTRQ(I) and INSERTQ(I) intrinsics:
1 - Converts INSERTQ/EXTRQ calls to INSERTQI/EXTRQI if the 'bit index' and 'length' operands are constant
2 - Converts INSERTQI/EXTRQI calls to shufflevector if the bit index/length are both byte aligned (we can already lower shuffles to INSERTQI/EXTRQI if its useful)
3 - Constant folding support
4 - Add zeroinitializer handling
Differential Revision: http://reviews.llvm.org/D13348
llvm-svn: 250609
Summary:
This is a temporary hack until we get around to remapping the vreg
numbers to local numbers. Dead vregs cause bad numbering and make
consumers sad.
We could also just look at debug info an use named locals instead, but
vregs have to work properly anyways so there!
Reviewers: binji, sunfish
Subscribers: jfb, llvm-commits, dschuff
Differential Revision: http://reviews.llvm.org/D13839
llvm-svn: 250594
Summary:
Some shared code for handling eh.exceptionpointer and eh.exceptioncode
needs to not share the part that truncates to 32 bits, which is intended
just for exception codes.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13747
llvm-svn: 250588
Our previous value of "16 + 8 + MaxCallFrameSize" for ParentFrameOffset
is incorrect when CSRs are involved. We were supposed to have a test
case to catch this, but it wasn't very rigorous.
The main effect here is that calling _CxxThrowException inside a
catchpad doesn't immediately crash on MOVAPS when you have an odd number
of CSRs.
llvm-svn: 250583
This lets us make guesses about symbols in third party DLLs without
debug info, like MSVCR120.dll or kernel32.dll. dbghelp does the same
thing.
llvm-svn: 250582
The motivation for this patch starts with PR20134:
https://llvm.org/bugs/show_bug.cgi?id=20134
void foo(int *a, int i) {
a[i] = a[i+1] + a[i+2];
}
It seems better to produce this (14 bytes):
movslq %esi, %rsi
movl 0x4(%rdi,%rsi,4), %eax
addl 0x8(%rdi,%rsi,4), %eax
movl %eax, (%rdi,%rsi,4)
Rather than this (22 bytes):
leal 0x1(%rsi), %eax
cltq
leal 0x2(%rsi), %ecx
movslq %ecx, %rcx
movl (%rdi,%rcx,4), %ecx
addl (%rdi,%rax,4), %ecx
movslq %esi, %rax
movl %ecx, (%rdi,%rax,4)
The most basic problem (the first test case in the patch combines constants) should also be fixed in InstCombine,
but it gets more complicated after that because we need to consider architecture and micro-architecture. For
example, AArch64 may not see any benefit from the more general transform because the ISA solves the sexting in
hardware. Some x86 chips may not want to replace 2 ADD insts with 1 LEA, and there's an attribute for that:
FeatureSlowLEA. But I suspect that doesn't go far enough or maybe it's not getting used when it should; I'm
also not sure if FeatureSlowLEA should also mean "slow complex addressing mode".
I see no perf differences on test-suite with this change running on AMD Jaguar, but I see small code size
improvements when building clang and the LLVM tools with the patched compiler.
A more general solution to the sext(add nsw(x, C)) problem that works for multiple targets is available
in CodeGenPrepare, but it may take quite a bit more work to get that to fire on all of the test cases that
this patch takes care of.
Differential Revision: http://reviews.llvm.org/D13757
llvm-svn: 250560
Crashing is bad, m'kay? Fixing a 4 year old bug of my own creation.
Adding the testcase now which I should have added then which would have
long since caught this.
The problem is that printMessage() will display the diagnostic but not
set HadError to true, resulting in the assembler continuing on its way
and trying to create relocations for things that may not allow them or
otherwise get itself into trouble. Using the Error() helper function
here rather than calling printMessage() directly resolves this.
rdar://23133240
llvm-svn: 250557
Summary:
We now use the block for the catchpad itself, rather than its normal
successor, as the funclet entry.
Putting the normal successor in the map leads downstream funclet
membership computations to erroneous results.
Reviewers: majnemer, rnk
Subscribers: rnk, llvm-commits
Differential Revision: http://reviews.llvm.org/D13798
llvm-svn: 250552
The number of samples collected at the head of a function only make
sense for top-level functions (i.e., those actually called as opposed to
being inlined inside another).
Head samples essentially count the time spent inside the function's
prologue. This clearly doesn't make sense for inlined functions, so we
were always emitting 0 in those.
llvm-svn: 250539
Summary: The syntax has changed a bit recently.
Reviewers: binji
Subscribers: llvm-commits, jfb, sunfish, dschuff
Differential Revision: http://reviews.llvm.org/D13821
llvm-svn: 250535
Summary:
When a cleanup's cleanupendpad or cleanupret targets a catchendpad, stop
trying to propagate the cleanup's parent's color to the catchendpad, since
what's needed is the cleanup's grandparent's color and the catchendpad
will get that color from the catchpad linkage already. We already had
this exclusion for invokes, but were missing it for
cleanupendpad/cleanupret.
Also add a missing line that tags cleanupendpads' states in the
EHPadStateMap, without with lowering invokes that target cleanupendpads
which unwind to other handlers (and so don't have the -1 state) will fail.
This fixes the reduced IR repro in PR25163.
Reviewers: majnemer, andrew.w.kaylor, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13797
llvm-svn: 250534
Ideally, we would like SimplifyCFG to be able to form select instructions even when the operands
are expensive (as defined by the TTI cost model) because that may expose further optimizations.
However, we would then like a later pass like CodeGenPrepare to undo that transformation if the
target would likely benefit from not speculatively executing an expensive op (this patch).
Once we have this safety mechanism in place, we can adjust SimplifyCFG to restore its
select-formation behavior that changed with r248439.
Differential Revision: http://reviews.llvm.org/D13297
llvm-svn: 250527
The `"statepoint-id"` and `"statepoint-num-patch-bytes"` attributes are
used solely to determine properties of the `gc.statepoint` being
created. Once the `gc.statepoint` is in place, these should be removed.
llvm-svn: 250491
Summary:
This is a step towards using operand bundles to carry deopt state till
RewriteStatepointsForGC. The change adds a flag to
RewriteStatepointsForGC that teaches it to pick up deopt state from a
`"deopt"` operand bundle attached to the `call` or `invoke` it is
wrapping.
The command line flag added, `-rs4gc-use-deopt-bundles`, will only exist
for a short while. Once we are able to pipe deopt bundle state through
the full optimization pipeline without problems, we will "constant fold"
`-rs4gc-use-deopt-bundles` to `true`.
Reviewers: swaroop.sridhar, reames
Subscribers: llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D13372
llvm-svn: 250489
Summary:
`cloneArithmeticIVUser` currently trips over expression like `add %iv,
-1` when `%iv` is being zero extended -- it tries to construct the
widened use as `add %iv.zext, zext(-1)` and (correctly) fails to prove
equivalence to `zext(add %iv, -1)` (here the SCEV for `%iv` is
`{1,+,1}`).
This change teaches `IndVars` to try sign extending the non-IV operand
if that makes the newly constructed IV use equivalent to the widened
narrow IV use.
Reviewers: atrick, hfinkel, reames
Subscribers: sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D13717
llvm-svn: 250483
Summary:
Follow the same syntax as for the spec repo. Both have evolved slightly
independently and need to converge again.
This, along with wasmate changes, allows me to do the following:
echo "int add(int a, int b) { return a + b; }" > add.c
./out/bin/clang -O2 -S --target=wasm32-unknown-unknown add.c -o add.wack
./experimental/prototype-wasmate/wasmate.py add.wack > add.wast
./sexpr-wasm-prototype/out/sexpr-wasm add.wast -o add.wasm
./sexpr-wasm-prototype/third_party/v8-native-prototype/v8/v8/out/Release/d8 -e "print(WASM.instantiateModule(readbuffer('add.wasm'), {print:print}).add(42, 1337));"
As you'd expect, the d8 shell prints out the right value.
Reviewers: sunfish
Subscribers: jfb, llvm-commits, dschuff
Differential Revision: http://reviews.llvm.org/D13712
llvm-svn: 250480
Android libc provides a fixed TLS slot for the unsafe stack pointer,
and this change implements direct access to that slot on AArch64 via
__builtin_thread_pointer() + offset.
This change also moves more code into TargetLowering and its
target-specific subclasses to get rid of target-specific codegen
in SafeStackPass.
This change does not touch the ARM backend because ARM lowers
builting_thread_pointer as aeabi_read_tp, which is not available
on Android.
llvm-svn: 250456
D4796 taught LLVM to fold some atomic integer operations into a single
instruction. The pattern was unaware that the instructions clobbered
flags. I fixed some of this issue in D13680 but had missed INC/DEC.
This patch adds the missing EFLAGS definition.
llvm-svn: 250438
Turns out this approach is buggy. In discussion about follow on work, Sanjoy pointed out that we could be subject to circular logic problems.
Consider:
if (i u< L) leave()
if ((i + 1) u< L) leave()
print(a[i] + a[i+1])
If we know that L is less than UINT_MAX, we could possible prove (in a control dependent way) that i + 1 does not overflow. This gives us:
if (i u< L) leave()
if ((i +nuw 1) u< L) leave()
print(a[i] + a[i+1])
If we now do the transform this patch proposed, we end up with:
if ((i +nuw 1) u< L) leave_appropriately()
print(a[i] + a[i+1])
That would be a miscompile when i==-1. The problem here is that the control dependent nuw bits got used to prove something about the first condition. That's obviously invalid.
This won't happen today, but since I plan to enhance LVI/CVP with exactly that transform at some point in the not too distant future...
llvm-svn: 250430
Summary:
x86 codegen is clever about generating good code for relaxed
floating-point operations, but it was being silly when globals and
immediates were involved, forgetting where the global was and
loading/storing from/to the wrong place. The same applied to hard-coded
address immediates.
Don't let it forget about the displacement.
This fixes https://llvm.org/bugs/show_bug.cgi?id=25171
A very similar bug when doing floating-points atomics to the stack is
also fixed by this patch.
This fixes https://llvm.org/bugs/show_bug.cgi?id=25144
Reviewers: pete
Subscribers: llvm-commits, majnemer, rsmith
Differential Revision: http://reviews.llvm.org/D13749
llvm-svn: 250429
Summary:
This macro is needed to prevent test/CodeGen/Mips/2008-08-01-AsmInline.ll from
failing after the integrated assembler is enabled by default.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13654
llvm-svn: 250414
Summary:
The -mcpu=mips16 option caused the Integrated Assembler to crash because
it couldn't figure out the architecture revision number to write to the
.MIPS.abiflags section. This CPU definition has been removed because, like
microMIPS, MIPS16 is an ASE to a base architecture.
Reviewers: vkalintiris
Subscribers: rkotler, llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13656
llvm-svn: 250407
AVX-512 bit shuffle fails on 32 bit since we create a vector of 64-bit constants.
I split 8x64-bit const vector to 16x32 on 32-bit mode.
Differential Revision: http://reviews.llvm.org/D13644
llvm-svn: 250390
failing when the suffix was added.
I assume the lack of a '.s' suffix means that the test case just wasn't running
before, and it has never worked on MIPS. I'll investigate that tomorrow.
llvm-svn: 250376
(e.g. bss sections).
MachO and ELF have been silently letting this pass, but COFFObjectFile contains
an assertion to catch this kind of (ab)use of the getSectionContents, and this
was causing the JIT to crash on COFF objects with BSS sections. This patch
should fix that.
llvm-svn: 250371
Recommit r250342: move coal-sections-powerpc.s to subdirectory for powerpc.
Some background on why we don't have to use *coal* sections anymore:
Long ago when C++ was new and "weak" had not been standardized, an attempt was
made in cctools to support C++ inlines that can be coalesced by putting them
into their own section (TEXT/textcoal_nt instead of TEXT/text).
The current macho linker supports the weak-def bit on any symbol to allow it to
be coalesced, but the compiler still puts weak-def functions/data into alternate
section names, which the linker must map back to the base section name.
This patch makes changes that are necessary to prevent the compiler from using
the "coal" sections and have it use the non-coal sections instead when the
target architecture is not powerpc:
TEXT/textcoal_nt instead use TEXT/text
TEXT/const_coal instead use TEXT/const
DATA/datacoal_nt instead use DATA/data
If the target is powerpc, we continue to use the *coal* sections since anyone
targeting powerpc is probably using an old linker that doesn't have support for
the weak-def bits.
Also, have the assembler issue a warning if it encounters a *coal* section in
the assembly file and inform the users to use the non-coal sections instead.
rdar://problem/14265330
Differential Revision: http://reviews.llvm.org/D13188
llvm-svn: 250370
With r250345 and r250343, we start to observe the following failure
when bootstrap clang with lto and pgo:
PHI node entries do not match predecessors!
%.sroa.029.3.i = phi %"class.llvm::SDNode.13298"* [ null, %30953 ], [ null, %31017 ], [ null, %30998 ], [ null, %_ZN4llvm8dyn_castINS_14ConstantSDNodeENS_7SDValueEEENS_10cast_rettyIT_T0_E8ret_typeERS5_.exit.i.1804 ], [ null, %30975 ], [ null, %30991 ], [ null, %_ZNK4llvm3EVT13getScalarTypeEv.exit.i.1812 ], [ %..sroa.029.0.i, %_ZN4llvm11SmallVectorIiLj8EED1Ev.exit.i.1826 ], !dbg !451895
label %30998
label %_ZNK4llvm3EVTeqES0_.exit19.thread.i
LLVM ERROR: Broken function found, compilation aborted!
I will re-commit this if the bot does not recover.
llvm-svn: 250366
A PDB can be thought of as a very simple file system. It is
occasionally illuminating to see the contents of the underlying files.
Differential Revision: http://reviews.llvm.org/D13674
llvm-svn: 250356
Recommit r250342: add -arch=ppc32 to the RUN lines of powerpc tests.
Some background on why we don't have to use *coal* sections anymore:
Long ago when C++ was new and "weak" had not been standardized, an attempt was
made in cctools to support C++ inlines that can be coalesced by putting them
into their own section (TEXT/textcoal_nt instead of TEXT/text).
The current macho linker supports the weak-def bit on any symbol to allow it to
be coalesced, but the compiler still puts weak-def functions/data into alternate
section names, which the linker must map back to the base section name.
This patch makes changes that are necessary to prevent the compiler from using
the "coal" sections and have it use the non-coal sections instead when the
target architecture is not powerpc:
TEXT/textcoal_nt instead use TEXT/text
TEXT/const_coal instead use TEXT/const
DATA/datacoal_nt instead use DATA/data
If the target is powerpc, we continue to use the *coal* sections since anyone
targeting powerpc is probably using an old linker that doesn't have support for
the weak-def bits.
Also, have the assembler issue a warning if it encounters a *coal* section in
the assembly file and inform the users to use the non-coal sections instead.
rdar://problem/14265330
Differential Revision: http://reviews.llvm.org/D13188
llvm-svn: 250349
Currently in JumpThreading pass, the branch weight metadata is not updated after CFG modification. Consider the jump threading on PredBB, BB, and SuccBB. After jump threading, the weight on BB->SuccBB should be adjusted as some of it is contributed by the edge PredBB->BB, which doesn't exist anymore. This patch tries to update the edge weight in metadata on BB->SuccBB by scaling it by 1 - Freq(PredBB->BB) / Freq(BB->SuccBB).
This is the third attempt to submit this patch, while the first two led to failures in some FDO tests. After investigation, it is the edge weight normalization that caused those failures. In this patch the edge weight normalization is fixed so that there is no zero weight in the output and the sum of all weights can fit in 32-bit integer. Several unit tests are added.
Differential revision: http://reviews.llvm.org/D10979
llvm-svn: 250345
Some background on why we don't have to use *coal* sections anymore:
Long ago when C++ was new and "weak" had not been standardized, an attempt was
made in cctools to support C++ inlines that can be coalesced by putting them
into their own section (TEXT/textcoal_nt instead of TEXT/text).
The current macho linker supports the weak-def bit on any symbol to allow it to
be coalesced, but the compiler still puts weak-def functions/data into alternate
section names, which the linker must map back to the base section name.
This patch makes changes that are necessary to prevent the compiler from using
the "coal" sections and have it use the non-coal sections instead when the
target architecture is not powerpc:
TEXT/textcoal_nt instead use TEXT/text
TEXT/const_coal instead use TEXT/const
DATA/datacoal_nt instead use DATA/data
If the target is powerpc, we continue to use the *coal* sections since anyone
targeting powerpc is probably using an old linker that doesn't have support for
the weak-def bits.
Also, have the assembler issue a warning if it encounters a *coal* section in
the assembly file and inform the users to use the non-coal sections instead.
rdar://problem/14265330
Differential Revision: http://reviews.llvm.org/D13188
llvm-svn: 250342
This is a cleaned up patch from the one written by John Regehr based on the findings of the Souper superoptimizer.
The basic idea here is that input bits that are known zero reduce the maximum count that the intrinsic could return. We know that the number of bits required to represent a particular count is at most log2(N)+1.
Differential Revision: http://reviews.llvm.org/D13253
llvm-svn: 250338
PR25157 identifies a bug where a load plus a vector shuffle is
incorrectly converted into an LXVDSX instruction. That optimization
is only valid if the load is of a doubleword, and in the noted case,
it was not. This corrects that problem.
Joint patch with Eric Schweitz, who provided the bugpoint-reduced test
case.
llvm-svn: 250324
Add a new command line switch, -gnu-hash-table, to print the content of that section.
Differential Revision: http://reviews.llvm.org/D13696
llvm-svn: 250291
This patch teaches x86 fast-isel how to select nontemporal stores.
On x86, we can use MOVNTI for nontemporal stores of doublewords/quadwords.
Instructions (V)MOVNTPS/PD/DQ can be used for SSE2/AVX aligned nontemporal
vector stores.
Before this patch, fast-isel always selected 'movd/movq' instead of 'movnti'
for doubleword/quadword nontemporal stores. In the case of nontemporal stores
of aligned vectors, fast-isel always selected movaps/movapd/movdqa instead of
movntps/movntpd/movntdq.
With this patch, if we use SSE2/AVX intrinsics for nontemporal stores we now
always get the expected (V)MOVNT instructions.
The lack of fast-isel support for nontemporal stores was spotted when analyzing
the -O0 codegen for nontemporal stores.
Differential Revision: http://reviews.llvm.org/D13698
llvm-svn: 250285
Binary encoded profiles used to encode all function names inline at
every reference. This is clearly suboptimal in terms of space. This
patch fixes this by adding a name table to the header of the file.
llvm-svn: 250241
We forgot to append the terminatepad's arguments which resulted in us
treating the old terminatepad as an argument to the new terminatepad
causing us to crash immediately. Instead, add the old terminatepad's
arguments to the new terminatepad.
This fixes PR25155.
llvm-svn: 250234
ArchiveMemberHeader, suggestion by Rafael Espíndola.
Also The clang-x86-win2008-selfhost bot still does not like the
malformed-machos 00000031.a test, so removing it for now. All
the other bots are fine with it however.
llvm-svn: 250222
Summary:
Emit the handler and clause locations immediately after the standard
xdata.
Clauses are emitted in the same order and format used to communiate them
to the CLR Execution Engine.
Add a lit test to verify correct table generation on a small but
interesting example function.
Reviewers: majnemer, andrew.w.kaylor, rnk
Subscribers: pgavlin, AndyAyers, llvm-commits
Differential Revision: http://reviews.llvm.org/D13451
llvm-svn: 250219
On Linux, the profile runtime can use __start_SECTNAME and __stop_SECTNAME
symbols defined by the linker to locate the start and end location of
a named section (with C name). This eliminates the need for instrumented
binary to call __llvm_profile_register_function during start-up time.
llvm-svn: 250199
flag as it was a Mach-O universal file.
The default as to which architecture slice that is dumped without an -arch flag
depends on the host architecture and the contents of the universal file. The
malformed archive 00000031.a file has both an x86_64 and i386 slice. So for
for x86_64 hosts only that slice is dumped, for non-x86_64 hosts, which is many
of the bots both slices are dumped.
The test is intended to only check that the malformation of the x86_64 which
has a non-decimal characters in the size field of the archive header so it no
longer crashes.
The problem turned out that the i388 slice of the malformed archive had a
different malformation which was causing the non-x86_64 bots to get this error:
llvm-objdump -macho -disassemble -arch i386 00000031.a
Archive : .00000031.a
00000031.a(c_start.o):
LLVM ERROR: Symbol name entry points before beginning or past end of file.
and causing the test as it was written to fail. So by adding ‘-arch x86_64’ it
should correct the test and the malformation on the i388 slice will not be
dumped.
Also the removal of the malformed-machos mem-crup-0261.macho was not causing
the issue so that is put back in.
Sorry for the churn on these tests, Kev
llvm-svn: 250184
As discussed in D13348 - the INSERTQI range combining code is wrong in that it confuses the insertion bit index with an extraction bit index.
The remaining legal combines are very unlikely (especially once we've converted to shuffles in D13348) so I'm removing the optimization.
llvm-svn: 250160
Weak linkage and friends allow a symbol to be overriden outside the
code generator's model, so GlobalsAA shouldn't assume that anything it
can compute about such a symbol is valid.
llvm-svn: 250156
The comment says this was stopped because it was unlikely to be
profitable. This is not true if you want to combine vector loads
with multiple components.
For a simple case that looks like
t0 = load t0 ...
t1 = load t0 ...
t2 = load t0 ...
t3 = load t0 ...
t4 = store t0:1, t0:1
t5 = store t4, t1:0
t6 = store t5, t2:0
t7 = store t6, t3:0
We want to get all of these stores onto a chain
that is a TokenFactor of these N loads. This mostly
solves the AMDGPU merge-stores.ll regressions
with -combiner-alias-analysis for merging vector
stores of vector loads.
llvm-svn: 250138
Summary:
D4796 taught LLVM to fold some atomic integer operations into a single
instruction. The pattern was unaware that the instructions clobbered
flags.
This patch adds the missing EFLAGS definition.
Floating point operations don't set flags, the subsequent fadd
optimization is therefore correct. The same applies for surrounding
load/store optimizations.
Reviewers: rsmith, rtrieu
Subscribers: llvm-commits, reames, morisset
Differential Revision: http://reviews.llvm.org/D13680
llvm-svn: 250135
This basic combine was surprisingly missing.
AMDGPU legalizes many operations in terms of 32-bit vector components,
so not doing this results in many extra copies and subregister extracts
that need to be cleaned up later.
InstCombine already does this for the hasOneUse case. The target hook
is to fix a handful of tests which break (e.g. ARM/vmov.ll) which turn
from a vector materialize repeated immediate instruction to a constant
vector load with more scalar copies from it.
llvm-svn: 250129
When lowering invoke statement, all unwind destinations are directly added as successors of call site block, and the weight of those new edges are not assigned properly. Actually, default weight 16 are used for those edges. This patch calculates the proper edge weights for those edges when collecting all unwind destinations.
Differential revision: http://reviews.llvm.org/D13354
llvm-svn: 250119
that caused aborts. This was because of the characters of the ‘Size’ field in
the archive header did not contain decimal characters.
rdar://22983603
llvm-svn: 250117
In JumpThreading pass, the branch weight metadata is not updated after CFG modification. Consider the jump threading on PredBB, BB, and SuccBB. After jump threading, the weight on BB->SuccBB should be adjusted as some of it is contributed by the edge PredBB->BB, which doesn't exist anymore. This patch tries to update the edge weight in metadata on BB->SuccBB by scaling it by 1 - Freq(PredBB->BB) / Freq(BB->SuccBB).
Differential revision: http://reviews.llvm.org/D10979
llvm-svn: 250089
We made them SP relative back in March (r233137) because that's the
value the runtime passes to EH functions. With the new cleanuppad IR,
funclets adjust their frame argument from SP to FP, so our offsets
should now be FP-relative.
llvm-svn: 250088
Function LowerVSETCC (in X86ISelLowering.cpp) worked under the wrong
assumption that for non-AVX512 targets, the source type and destination type
of a type-legalized setcc node were always the same type.
This assumption was unfortunately incorrect; the type legalizer is not always
able to promote the return type of a setcc to the same type as the first
operand of a setcc.
In the case of a vsetcc node, the legalizer firstly checks if the first input
operand has a legal type. If so, then it promotes the return type of the vsetcc
to that same type. Otherwise, the return type is promoted to the 'next legal
type', which, for vectors of MVT::i1 is always a 128-bit integer vector type.
Example (-mattr=+avx):
%0 = trunc <8 x i32> %a to <8 x i23>
%1 = icmp eq <8 x i23> %0, zeroinitializer
The initial selection dag for the code above is:
v8i1 = setcc t5, t7, seteq:ch
t5: v8i23 = truncate t2
t2: v8i32,ch = CopyFromReg t0, Register:v8i32 %vreg1
t7: v8i32 = build_vector of all zeroes.
The type legalizer would firstly check if 't5' has a legal type. If so, then it
would reuse that same type to promote the return type of the setcc node.
Unfortunately 't5' is of illegal type v8i23, and therefore it cannot be used to
promote the return type of the setcc node. Consequently, the setcc return type
is promoted to v8i16. Later on, 't5' is promoted to v8i32 thus leading to the
following dag node:
v8i16 = setcc t32, t25, seteq:ch
where t32 and t25 are now values of type v8i32.
Before this patch, function LowerVSETCC would have wrongly expanded the setcc
to a single X86ISD::PCMPEQ. Surprisingly, ISel was still able to match an
instruction. In our case, ISel would have matched a VPCMPEQWrr:
t37: v8i16 = X86ISD::VPCMPEQWrr t36, t25
However, t36 and t25 are both VR256, while the result type is instead of class
VR128. This inconsistency ended up causing the insertion of COPY instructions
like this:
%vreg7<def> = COPY %vreg3; VR128:%vreg7 VR256:%vreg3
Which is an invalid full copy (not a sub register copy).
Eventually, the backend would have hit an UNREACHABLE "Cannot emit physreg copy
instruction" in the attempt to expand the malformed pseudo COPY instructions.
This patch fixes the problem adding the missing logic in LowerVSETCC to handle
the corner case of a setcc with 128-bit return type and 256-bit operand type.
This problem was originally reported by Dimitry as PR25080. It has been latent
for a very long time. I have added the minimal reproducible from that bugzilla
as test setcc-lowering.ll.
Differential Revision: http://reviews.llvm.org/D13660
llvm-svn: 250085
On targets where f32 is not legal, we have to look through a BITCAST SDNode to
find the register that an argument is stored in when emitting debug info, or we
will not be able to emit a DW_AT_location for it.
Differential Revision: http://reviews.llvm.org/D13005
llvm-svn: 250056
Summary:
This removes unnecessary instructions when extracting from an undefined register
and also fixes a crash for O32 when passing undef to a double argument in
held in integer registers.
Reviewers: vkalintiris
Subscribers: llvm-commits, zoran.jovanovic, petarj
Differential Revision: http://reviews.llvm.org/D13467
llvm-svn: 250039
GlobalOpt currently merges stores into the initialisers of internal,
externally_initialized globals, but should not do so as the value of the global
may change between the initialiser and any code in the module being run.
llvm-svn: 250035
C semantics force sub-int-sized values (e.g. i8, i16) to be promoted to int
type (e.g. i32) whenever arithmetic is performed on them.
For targets with native i8 or i16 operations, usually InstCombine can shrink
the arithmetic type down again. However InstCombine refuses to create illegal
types, so for targets without i8 or i16 registers, the lengthening and
shrinking remains.
Most SIMD ISAs (e.g. NEON) however support vectors of i8 or i16 even when
their scalar equivalents do not, so during vectorization it is important to
remove these lengthens and truncates when deciding the profitability of
vectorization.
The algorithm this uses starts at truncs and icmps, trawling their use-def
chains until they terminate or instructions outside the loop are found (or
unsafe instructions like inttoptr casts are found). If the use-def chains
starting from different root instructions (truncs/icmps) meet, they are
unioned. The demanded bits of each node in the graph are ORed together to form
an overall mask of the demanded bits in the entire graph. The minimum bitwidth
that graph can be truncated to is the bitwidth minus the number of leading
zeroes in the overall mask.
The intention is that this algorithm should "first do no harm", so it will
never insert extra cast instructions. This is why the use-def graphs are
unioned, so that subgraphs with different minimum bitwidths do not need casts
inserted between them.
This algorithm works hard to reduce compile time impact. DemandedBits are only
queried if there are extends of illegal types and if a truncate to an illegal
type is seen. In the general case, this results in a simple linear scan of the
instructions in the loop.
No non-noise compile time impact was seen on a clang bootstrap build.
llvm-svn: 250032
This patch fixes a problem in function 'combineX86ShuffleChain' that causes a
chain of shuffles to be wrongly folded away when the combined shuffle mask has
only one element.
We may end up with a combined shuffle mask of one element as a result of
multiple calls to function 'canWidenShuffleElements()'.
Function canWidenShuffleElements attempts to simplify a shuffle mask by widening
the size of the elements being shuffled.
For every pair of shuffle indices, function canWidenShuffleElements checks if
indices refer to adjacent elements. If all pairs refer to "adjacent" elements
then the shuffle mask is safely widened. As a consequence of widening, we end up
with a new shuffle mask which is half the size of the original shuffle mask.
The byte shuffle (pshufb) from test pr24562.ll has a mask of all SM_SentinelZero
indices. Function canWidenShuffleElements would combine each pair of
SM_SentinelZero indices into a single SM_SentinelZero index. So, in a
logarithmic number of steps (4 in this case), the pshufb mask is simplified to
a mask with only one index which is equal to SM_SentinelZero.
Before this patch, function combineX86ShuffleChain wrongly assumed that a mask
of size one is always equivalent to an identity mask. So, the entire shuffle
chain was just folded away as the combined shuffle mask was treated as a no-op
mask.
With this patch we know check if the only element of a combined shuffle mask is
SM_SentinelZero. In case, we propagate a zero vector.
Differential Revision: http://reviews.llvm.org/D13364
llvm-svn: 250027
New instructions using floating point registers have been added, to check
that AsmParser can deal with fp regs in vector instructions.
This tests r249810.
llvm-svn: 250023
This patch also allows the -delinearize pass to delinearize expressions that do
not have an outermost SCEVAddRec expression. The SCEV::delinearize
infrastructure allowed this since r240952, but the -delinearize pass was not
updated yet.
llvm-svn: 250018
The XOP vector integer comparisons can deal with all signed/unsigned comparison cases directly and can be easily commuted as well (D7646).
llvm-svn: 249976
Summary:
The change to use the VST function entries for lazy deserialization did
not handle the case of anonymous functions without aliases. In that case
we must fall back to scanning the function blocks as there is no VST
entry.
Reviewers: dexonsmith, joker.eph, davidxl
Subscribers: tstellarAMD, llvm-commits
Differential Revision: http://reviews.llvm.org/D13596
llvm-svn: 249947
expandPostRAPseudo():
STX -> 2 * STD: The first STD should not have the kill flag set for the address.
SystemZElimCompare:
BRC -> BRCT conversion: Don't forget to remove the CC<use,kill> operand.
Needed to make SystemZ/asm-17.ll pass with -verify-machineinstrs, which
now runs with this flag.
Reviewed by Ulrich Weigand.
llvm-svn: 249945
malformed Mach-O file that caused a crash. This was because of an
assert where the code was incorrectly attempting to parse relocation
entries off of the sections and the filetype was not an MH_OBJECT.
rdar://22983603
llvm-svn: 249921
The new implementation works at least as well as the old implementation
did.
Also delete the associated preparation tests. They don't exercise
interesting corner cases of the new implementation. All the codegen
tests of the EH tables have already been ported.
llvm-svn: 249918
Also Fix a buglet where SEH tables had ranges that spanned funclets.
The remaining tests using the old landingpad IR are preparation tests,
and will be deleted along with the old preparation.
llvm-svn: 249917
x64 catchpads use rax to inform the unwinder where control should go
next. However, we must initialize rax before the epilogue sequence so
as to not perturb the unwinder.
llvm-svn: 249910
This occurred due to introducing the invalid i64 type after type
legalization had already finished, in an attempt to workaround bitcast
f64 -> v2i32 not doing constant folding.
The *right* thing is to actually fix bitcast, but that has other
complications. So, for now, just get rid of the broken workaround, and
check in a test-case showing that it doesn't crash, with TODOs for
emitting proper code.
llvm-svn: 249908
This wasn't very observable in execution tests, because usually there is
an invoke in the catchpad that unwinds the the catchendpad but never
actually throws.
llvm-svn: 249898
When running combine on an extract_vector_elt, it wants to look through
a bitcast to check if the argument to the bitcast was itself an
extract_vector_elt with particular operands.
However, it called getOperand() on the argument to the bitcast *before*
checking that the opcode was EXTRACT_VECTOR_ELT, assert-failing if there
were zero operands for the actual opcode.
Fix, and add trivial test.
llvm-svn: 249891
Doing so could cause the post-unswitching convergent ops to be
control-dependent on the unswitch condition where they were not before.
This check could be refined to allow unswitching where the convergent
operation was already control-dependent on the unswitch condition.
llvm-svn: 249874
With this patch we can now read and write inline stacks in sample
profiles to the binary encoded profiles.
In a subsequent patch, I will add a string table to the binary encoding.
Right now function names are emitted as strings every time we find them.
This is too bloated and will produce large files in applications with
lots of inlining.
llvm-svn: 249861
from malformed Mach-O files that caused crashes. The first because the
offset in a dyld bind table entry was out of range. The second because their
was no image info section and the routine printing it did not have the
need check to see the section did not exist.
rdar://22983603
llvm-svn: 249845
This patch corresponds to review:
http://reviews.llvm.org/D12032
This patch builds onto the patch that provided scalar to vector conversions
without stack operations (D11471).
Included in this patch:
- Vector element extraction for all vector types with constant element number
- Vector element extraction for v16i8 and v8i16 with variable element number
- Removal of some unnecessary COPY_TO_REGCLASS operations that ended up
unnecessarily moving things around between registers
Not included in this patch (will be in upcoming patch):
- Vector element extraction for v4i32, v4f32, v2i64 and v2f64 with
variable element number
- Vector element insertion for variable/constant element number
Testing is provided for all extractions. The extractions that are not
implemented yet are just placeholders.
llvm-svn: 249822
Pass MemCpyOpt doesn't check if a store instruction is nontemporal.
As a consequence, adjacent nontemporal stores are always merged into a
memset call.
Example:
;;;
define void @foo(<4 x float>* nocapture %p) {
entry:
store <4 x float> zeroinitializer, <4 x float>* %p, align 16, !nontemporal !0
%p1 = getelementptr inbounds <4 x float>, <4 x float>* %dst, i64 1
store <4 x float> zeroinitializer, <4 x float>* %p1, align 16, !nontemporal !0
ret void
}
!0 = !{i32 1}
;;;
In this example, the two nontemporal stores are combined to a memset of zero
which does not preserve the nontemporal hint. Later on the backend (tested on a
x86-64 corei7) expands that memset call into a sequence of two normal 16-byte
aligned vector stores.
opt -memcpyopt example.ll -S -o - | llc -mcpu=corei7 -o -
Before:
xorps %xmm0, %xmm0
movaps %xmm0, 16(%rdi)
movaps %xmm0, (%rdi)
With this patch, we no longer merge nontemporal stores into calls to memset.
In this example, llc correctly expands the two stores into two movntps:
xorps %xmm0, %xmm0
movntps %xmm0, 16(%rdi)
movntps %xmm0, (%rdi)
In theory, we could extend the usage of !nontemporal metadata to memcpy/memset
calls. However a change like that would only have the effect of forcing the
backend to expand !nontemporal memsets back to sequences of store instructions.
A memset library call would not have exactly the same semantic of a builtin
!nontemporal memset call. So, SelectionDAG will have to conservatively expand
it back to a sequence of !nontemporal stores (effectively undoing the merging).
Differential Revision: http://reviews.llvm.org/D13519
llvm-svn: 249820
Accept r11 when targeting Windows on ARM rather than just low registers.
Because we are in a thumb-2 only mode, this may be slightly more expensive in
code size, but results in better code for the environment since it spills the
frame register, which is generally desired for fast stack walking as per the
ABI.
llvm-svn: 249804
Summary:
- Recurse from cleanupendpads to their cleanuppads, to make sure the
cleanuppad is visited if it has a cleanupendpad but no cleanupret.
- Check for and avoid double-processing cleanuppads, to allow for them to
have multiple cleanuprets (plus cleanupendpads).
- Update Cxx state numbering to visit toplevel cleanupendpads and to
recurse from cleanupendpads to their preds, to ensure we number any
funclets in inlined cleanups. SEH state numbering already did this.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13374
llvm-svn: 249792
James Molloy