The DWARFv2-4 specification for the line table header states that the
include directories and file name tables both end with a single null
byte. Prior to this change, the parser did not detect if this byte was
missing, because it also stopped reading the tables once it reached the
prologue end, as claimed by the header_length field. This change adds a
check that the terminator has been seen at the end of each table.
Reviewed by: dblaikie, MaskRay
Differential Revision: https://reviews.llvm.org/D74413
The number of standard opcodes is defined to be opcode_base - 1, so a
value of 0 for the opcode_base caused a crash as an attempt was made to
reserve many entries in a vector. This change fixes the crash, by
issuing a warning and skipping reading of standard opcode lengths in the
event of an opcode_base of 0.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D74309
Also remove some test duplication and add a test case that shows the
maximum version is rejected (this also shows that the value in the error
message is actually in decimal, and not just missing an 0x prefix).
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D74403
The patch removes unnecessary members of DWARFDebugAddr and further
simplifies the implementation by separating parsing methods of tables
in the DWARFv5 and pre-standard formats.
Differential Revision: https://reviews.llvm.org/D74197
As a preparation for the subsequent patches, this updates the wordings
of some error messages in DWARFDebugAddr.
Differential Revision: https://reviews.llvm.org/D74196
This replaces a collocation "a .debug_addr table" with "an address table"
because the latter sounds more accurate.
Differential Revision: https://reviews.llvm.org/D74407
As there is no header in pre-DWARFv5 address tables, and we fill
the class data members with some artificial values, we should not
dump them as that might be misleading.
Differential Revision: https://reviews.llvm.org/D74195
As addresses in the address tables may have relocations, thus,
the relocations should be resolved to read the correct address.
That is especially important for targets that use RELA relocations
because in that case addends are stored in relocation sections.
Differential Revision: https://reviews.llvm.org/D74404
Summary:
Dwarf stores source-file names the three parts:
<compilation_directory><include_directory><filename>
Prior to this change, the code only allowed retrieving either all
three as the absolute path, or just the filename. But many
compile-command lines--especially those in hermetic build systems
don't specify an absolute path, nor just the filename, but rather the
path relative to the compilation directory. This features allows
retrieving them in that style.
Add tests for path printing styles.
Modify createBasicPrologue to handle include directories.
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73383
Summary:
That patch is extracted from https://reviews.llvm.org/D74308.
Currently there are two patterns to name error handling functions:
using "Callback" and "Handler". This patch uses "Handler" for all
usage places.
Reviewers: jhenderson, dblaikie, probinson, aprantl
Reviewed By: jhenderson, dblaikie
Subscribers: hiraditya, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D74354
If a debug line section with version of greater than 5 is encountered,
prior to this change the parser would accept it and treat it as version
5. This might work to some extent, but then it might not at all, as it
really depends on the format of the unspecified future version, which
will be different (otherwise there would be no point in changing the
version number). Any information we could provide has a good chance of
being invalid, so we should just refuse to parse such tables.
Reviewed by: dblaikie, MaskRay
Differential Revision: https://reviews.llvm.org/D74204
If dumping an Split DWARF file that hasn't been split into separate
files (such as from llc - that includes the plain and .dwo sections in
the same file) allow both macinfo and macinfo.dwo sections to be dumped.
The function a) returned 32-bits when in DWARF64, the PrologueLength
field is 64-bits in size, and b) didn't work for DWARF version 5.
Also deleted some related dead code. With this deletion, getLength is
itself dead, but another change is about to make use of it.
Reviewed by: probinson
Differential Revision: https://reviews.llvm.org/D73626
Summary:
gnu addr2line prints DWARF line table discriminators like so:
<file>:<line> (discriminator <Number>)
This matches that behavior.
Document how and when --output-style=GNU prints discriminators
Add test for new GNU-style discriminator printing.
Reviewers: rupprecht, labath, jhenderson
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73318
Summary:
Add test case for the same. This test case will also serve as a
starting point for later symbolizer tests.
Reviewers: dblaikie, jdoerfert
Subscribers: hiraditya, llvm-commits, jhenderson
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73583
Many of the debug line prologue errors are not inherently fatal. In most
cases, we can make reasonable assumptions and carry on. This patch does
exactly that. In the case of length problems, the approach of "assume
stated length is correct" is taken which means the offset might need
adjusting.
This is a relanding of b94191fe, fixing an LLD test and the LLDB build.
Reviewed by: dblaikie, labath
Differential Revision: https://reviews.llvm.org/D72158
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Many of the debug line prologue errors are not inherently fatal. In most
cases, we can make reasonable assumptions and carry on. This patch does
exactly that. In the case of length problems, the approach of "the
claimed length is correct" is taken to be consistent with other
instances such as the SectionParser, which ignores the read length.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D72158
It is possible to try to keep parsing a debug line program even when the
length of an extended opcode does not match what is expected for that
opcode. This patch changes what was previously a fatal error to be
non-fatal. The parser now continues by assuming the the claimed length
is correct, even if it means moving the offset backwards.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D72155
The Version was used only to determine the size of an operand of
DW_OP_call_ref. The size was 4 for all versions apart from 2, but
the DW_OP_call_ref operation was introduced only in DWARF3. Thus,
the code may be simplified and using of Version may be eliminated.
Differential Revision: https://reviews.llvm.org/D73264
As DataExtractor already has a method to extract an unsigned value of
a specified size, there is no need to duplicate that.
Differential Revision: https://reviews.llvm.org/D73263
The padding field is reserved for DWARF and does not contain any useful
information. No need to read, store and report it.
Differential Revision: https://reviews.llvm.org/D73042
This structure was used to get the size of the fixed-size part of a Name
Index header for 32-bit DWARF. It is unsuitable for 64-bit DWARF because
the size of the unit length field is different.
Differential Revision: https://reviews.llvm.org/D73040
This helps to detect and report parsing errors better.
The patch follows the ideas of LLDB's patches D59370 and D59381.
It adds tests for valid and some invalid cases. More checks and
tests to come. Note that the patch fixes validation of the Length
field because the value does not include the field itself.
The existing users are updated to show the error messages.
Differential Revision: https://reviews.llvm.org/D71875
Summary:
This patch implements `formatv()` formatting for `dwarf::LineNumberOps`
and makes use of it for the `llvm-dwarfdump --debug-line` dump.
Previously, unknown line number standard opcodes would lead to undefined
behaviour. The code would attempt to format the data pointer of an empty
`StringRef` (a null pointer) using `%s`. According to the description
for `format()`, use of that interface carries the "risk of `printf`".
Passing a null pointer in place of an array to a C library function
results in undefined behaviour.
Reviewers: jhenderson, daltenty, stevewan
Reviewed By: jhenderson
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72369
Reasonable assumptions can be made when a parsed address length does not
match the expected length, so there's no need for this to be fatal.
Reviewed by: ikudrin
Differential Revision: https://reviews.llvm.org/D72154
Unlike most of our errors in the debug line parser, the "no end of
sequence" message was missing any reference to which line table it
refererred to. This change adds the offset to this message.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D72443
The previous message mentioned DW_LLE_offset_pair, but this is
incorrect/confusing because we can get this message even with DWARF4
(which does not use DW_LLE encodings). This happens because DWARF<=4
location entries are "upgraded" to DWARF v5 during parsing.
The new error message refrains from referencing specific constants.
Fixes pr44482.
If the claimed unit length of a debug line program is such that the line
table would finish past the end of the .debug_line section, an infinite
loop occurs because the data extractor will continue to "read" zeroes
without changing the offset. This previously didn't hit an error because
the line table program handles a series of zeroes as a bad extended
opcode.
This patch fixes the inifinite loop and adds a warning if the program
doesn't fit in the available data.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D72279
When getting the file name form the line table prologue we assume that a
valid string form value can always be extracted as a string. If you look
at the implementation of DWARFormValue this is not necessarily true. I
hit this assertion from LLDB when I create a "dummy" DWARFContext that
was missing the string section.
The V5 directory and filename tables had checks in to make sure we
hadn't read past the end of the line table prologue. Since previous
changes to the data extractor class ensure we never read past the end,
these checks are now redundant, so this patch removes them.
There is still a check to show that the whole prologue remains within
the prologue length.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D71768
Summary:
I used this information to motivate splitting up the Intrinsic::ID enum
(5d986953c8) and adding a key method to
clang::Sema (586f65d31f) which saved a
fair amount of object file size.
Example output for clang.pdb:
Top 10 types responsible for the most TPI input bytes:
index total bytes count size
0x3890: 8,671,220 = 1,805 * 4,804
0xE13BE: 5,634,720 = 252 * 22,360
0x6874C: 5,181,600 = 408 * 12,700
0x2A1F: 4,520,528 = 1,574 * 2,872
0x64BFF: 4,024,020 = 469 * 8,580
0x1123: 4,012,020 = 2,157 * 1,860
0x6952: 3,753,792 = 912 * 4,116
0xC16F: 3,630,888 = 633 * 5,736
0x69DD: 3,601,160 = 985 * 3,656
0x678D: 3,577,904 = 319 * 11,216
In this case, we can see that record 0x3890 is responsible for ~8MB of
total object file size for objects in clang.
The user can then use llvm-pdbutil to find out what the record is:
$ llvm-pdbutil dump -types -type-index 0x3890
Types (TPI Stream)
============================================================
Showing 1 records.
0x3890 | LF_FIELDLIST [size = 4804]
- LF_STMEMBER [name = `WORDTYPE_MAX`, type = 0x1001, attrs = public]
- LF_MEMBER [name = `U`, Type = 0x37F0, offset = 0, attrs = private]
- LF_MEMBER [name = `BitWidth`, Type = 0x0075 (unsigned), offset = 8, attrs = private]
- LF_METHOD [name = `APInt`, # overloads = 8, overload list = 0x3805]
...
In this case, we can see that these are members of the APInt class,
which is emitted in 1805 object files.
The next largest type is ASTContext:
$ llvm-pdbutil dump -types -type-index 0xE13BE bin/clang.pdb
0xE13BE | LF_FIELDLIST [size = 22360]
- LF_BCLASS
type = 0x653EA, offset = 0, attrs = public
- LF_MEMBER [name = `Types`, Type = 0x653EB, offset = 8, attrs = private]
- LF_MEMBER [name = `ExtQualNodes`, Type = 0x653EC, offset = 24, attrs = private]
- LF_MEMBER [name = `ComplexTypes`, Type = 0x653ED, offset = 48, attrs = private]
- LF_MEMBER [name = `PointerTypes`, Type = 0x653EE, offset = 72, attrs = private]
...
ASTContext only appears 252 times, but the list of members is long, and
must be repeated everywhere it is used.
This was the output before I split Intrinsic::ID:
Top 10 types responsible for the most TPI input:
0x686C: 69,823,920 = 1,070 * 65,256
0x686D: 69,819,640 = 1,070 * 65,252
0x686E: 69,819,640 = 1,070 * 65,252
0x686B: 16,371,000 = 1,070 * 15,300
...
These records were all lists of intrinsic enums.
Reviewers: MaskRay, ruiu
Subscribers: mgrang, zturner, thakis, hans, akhuang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71437
This patch fixes an inconsistency where we were using std::function in
some places and function_ref in others to pass around the error handling
callback.
Reviewed by: MaskRay
Differential Revision: https://reviews.llvm.org/D71762
Now that DWARFv5 provides a way to identify DWARF expressions based on
form, rather than only by attribute - use it to always provide pretty
printing for any exprloc attribute, not only the attributes known to
contain expressions.
Tests "dwarfdump-rnglists-dwarf64.s" and "dwarfdump-rnglists.s" were
malformed because they had missing required DWO ID fields in split
compilation unit headers. The patch fixes the tests and checks
the reading of a unit header more thoroughly.
Differential Revision: https://reviews.llvm.org/D71704
Extends DWARF expression language to express locals/globals locations. (via
target-index operands atm) (possible variants are: non-virtual registers
or address spaces)
The WebAssemblyExplicitLocals can replace virtual registers to targertindex
operand type at the time when WebAssembly backend introduces
{get,set,tee}_local instead of corresponding virtual registers.
Reviewed By: aprantl, dschuff
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D52634
Summary:
With -gdwarf-5 local variable locations are emitted as DW_FORM_loclistx
form instead of the regular DW_FORM_sec_offset. Teach
DWARFDie::getLocations to understand the new format and use it in
llvm-symbolizer "FRAME" command.
Reviewers: pcc, jdoerfert
Subscribers: srhines, aprantl, hiraditya, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70756
as it causes a layering violation/dependency cycle:
llvm/lib/CodeGen/AsmPrinter/DwarfDebug.cpp -> llvm/DebugInfo/DWARF/DWARFExpression.h
llvm/include/llvm/DebugInfo/DWARF/DWARFOptimizer.h -> llvm/CodeGen/NonRelocatableStringpool.h
This reverts commit abc7f6800d.
The debug line verbose printing was printing the wrong values for rows
added via DW_LNE_end_sequence, because the row was being printed AFTER
its state had been reset following it being appended to the line table.
This patch fixes this issue by printing the row before appending it.
Reviewers: dblaikie, MaskRay
Differential Revision: https://reviews.llvm.org/D71664
That patch is extracted from the D70709. It moves CompileUnit, DeclContext
into llvm/DebugInfo/DWARF. It also adds new file DWARFOptimizer with
AddressesMap class. AddressesMap generalizes functionality
from RelocationManager.
Differential Revision: https://reviews.llvm.org/D71271
Commit 84a9756 added an extra blank line at the end of any line table.
However, a blank line is also printed after the line table header, which
meant that two blank lines in a row were being printed after a header,
if there were no rows. This patch defers the post-header blank line
printing until it has been determined that there are rows to print.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D71540
This helps delineate it in the output from later tables or other output.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D71344
That patch adds checking into DWARFVerifier that the Skeleton
compilation unit does not have children.
Differential Revision: https://reviews.llvm.org/D71244
The Isa register is a uint8_t, but at least on Windows this is
internally an unsigned char, which meant that prior to this patch it got
formatted as an ASCII character, rather than a decimal number. This
patch fixes this by casting it to a uint64_t before printing. I did it
this way instead of using a uint8_t formatter because a) it is simpler,
and b) it allows us to change the internal type of Isa in the future
without this code breaking.
I also took the opportunity to test the printing of the other standard
opcodes.
Reviewed by: probinson
Differential Revision: https://reviews.llvm.org/D71274
GCC says:
.../llvm/lib/DebugInfo/GSYM/FunctionInfo.cpp:195:12:
error: ‘InfoType’ is not a class, namespace, or enumeration
case InfoType::EndOfList:
^
Presumably, GCC thinks InfoType is a variable here. Work around it by
using the name IT as is done above.
Summary:
Lookup functions are designed to not fully decode a FunctionInfo, LineTable or InlineInfo, they decode only what is needed into a LookupResult object. This allows lookups to avoid costly memory allocations and avoid parsing large amounts of information one a suitable match is found.
LookupResult objects contain the address that was looked up, the concrete function address range, the name of the concrete function, and a list of source locations. One for each inline function, and one for the concrete function. This allows one address to turn into multiple frames and improves the signal you get when symbolicating addresses in GSYM files.
Reviewers: labath, aprantl
Subscribers: mgorny, hiraditya, llvm-commits, lldb-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70993
Summary:
Currently these function return the raw content of the appropriate table
header, which means they are relative to the DW_AT_{loc,rng}list_base,
and one has to relocate them in order to do anything.
This changes the functions to perform the relocation themselves, which
seems more clearer, particularly as they are sitting right next to the
find{Rng,Loc}listFromOffset functions, but one *cannot* simply take the
result of these functions and take pass them there.
The only effect of this patch is to change what value is dumped for the
DW_AT_ranges attribute, which I think is for the better, as previously
the values appeared to point into thin air.
(The main reason I am looking at this is because I was trying to
implement equivalent functionality in lldb's DWARFUnit, and was stumped
by this behavior.
Reviewers: dblaikie, JDevlieghere, aprantl
Subscribers: hiraditya, llvm-commits, SouraVX
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71006
Build ID is a protocol for looking up debug files that's already
supported by various tools including debuggers. For example, when
locating debug files, gdb would check the following directories:
- /usr/lib/debug/.build-id/ab/cdef1234.debug
- /usr/bin/ls.debug
- /usr/bin/.debug/ls.debug
- /usr/lib/debug/usr/bin/ls.debug
llvm-symbolizer currently consults all of these except for build ID
based one. This patch implements support for build ID lookup. The
set of debug directories to search is specified by the new option:
--debug-file-directory, whose name matches the debug-file-directory
variable used by gdb for the same purpose.
Differential Revision: https://reviews.llvm.org/D70759
Summary:
lldb's loclists parser has support for DW_LLE_start_end(x) encodings. To
avoid regressing when switching the implementation to llvm's, I add
parsing support for all previously unsupported location list encodings.
Reviewers: dblaikie, JDevlieghere, aprantl, SouraVX
Subscribers: hiraditya, probinson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70949
Summary:
The dump() function already accepts a callback. This makes
getAbsoluteRanges do the same. The existing DWARFUnit overload is
implemented on top of the new function.
This enables usage of the debug_rnglists parser from within lldb (which
has it's own dwarf parser).
Reviewers: dblaikie, JDevlieghere, aprantl
Subscribers: hiraditya, probinson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70952
Summary:
This does exactly what it says on the box. The only small gotcha is the
section index computation for offset_pair entries, which can use either
the base address section, or the section from the offset_pair entry.
This is to support both the cases where the base address is relocated
(points to the base of the CU, typically), and the case where the base
address is a constant (typically zero) and relocations are on the
offsets themselves.
Reviewers: dblaikie, JDevlieghere, aprantl, SouraVX
Subscribers: hiraditya, llvm-commits, probinson
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70540
This patch adds support for debug_macinfo.dwo section[pre-standardized]
to llvm and llvm-dwarfdump.
Reviewers: probinson, dblaikie, aprantl, jini.susan.george, alok
Differential Revision: https://reviews.llvm.org/D70705
Tags: #debug-info #llvm
Summary:
Use getSubroutineName() to the the subrouting name; this function knows
how to handle cases when DW_TAG_subprogram refers to an earlier
declaration:
0x00000050: DW_TAG_subprogram
DW_AT_linkage_name ("_ZN1A1fEv")
DW_AT_name ("f")
...
0x00000067: DW_TAG_subprogram
DW_AT_low_pc (0x0000000000000000)
DW_AT_high_pc (0x0000000000000020)
DW_AT_specification (0x00000050 "_ZN1A1fEv")
...
0x0000008c: DW_TAG_variable
Reviewers: pcc, vitalybuka, jdoerfert
Subscribers: srhines, hiraditya, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70630
Summary:
Support location lists in FRAME command.
These are used for the majority of local variables in optimized code.
Also support DW_OP_breg in addition to DW_OP_fbreg when it refers to the
same register as DW_AT_frame_base.
Reviewers: pcc, jdoerfert
Subscribers: srhines, hiraditya, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70629
Summary:
llvm-symbolizer protocol is empty string means end-of-output.
Do not emit empty string when a function or a variable do not have a
name for any reason. Emit "??".
Reviewers: pcc, vitalybuka, jdoerfert
Subscribers: srhines, hiraditya, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70626
The original commit message follows.
This patch adds support for debug_loclists.dwo section in llvm and llvm-dwarfdump.
Also Fixes PR43622, PR43623.
Reviewers: dblaikie, probinson, labath, aprantl, jini.susan.george
Differential Revision: https://reviews.llvm.org/D69462
This patch adds support for debug_loclists.dwo section in llvm and llvm-dwarfdump.
Also Fixes PR43622, PR43623.
Reviewers: dblaikie, probinson, labath, aprantl, jini.susan.george
https://reviews.llvm.org/D69462
Summary:
Instead of going to the debug_loc section directly, use new
DWARFDie::getLocations instead. This means that the code will now
automatically support debug_loclists sections.
This is the last usage of the old debug_loc methods, and they can now be
removed.
Reviewers: dblaikie, JDevlieghere, aprantl, SouraVX
Subscribers: hiraditya, probinson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70534
Summary:
Most libraries are defined in the lib/ directory but there are also a
few libraries defined in tools/ e.g. libLLVM, libLTO. I'm defining
"Component Libraries" as libraries defined in lib/ that may be included in
libLLVM.so. Explicitly marking the libraries in lib/ as component
libraries allows us to remove some fragile checks that attempt to
differentiate between lib/ libraries and tools/ libraires:
1. In tools/llvm-shlib, because
llvm_map_components_to_libnames(LIB_NAMES "all") returned a list of
all libraries defined in the whole project, there was custom code
needed to filter out libraries defined in tools/, none of which should
be included in libLLVM.so. This code assumed that any library
defined as static was from lib/ and everything else should be
excluded.
With this change, llvm_map_components_to_libnames(LIB_NAMES, "all")
only returns libraries that have been added to the LLVM_COMPONENT_LIBS
global cmake property, so this custom filtering logic can be removed.
Doing this also fixes the build with BUILD_SHARED_LIBS=ON
and LLVM_BUILD_LLVM_DYLIB=ON.
2. There was some code in llvm_add_library that assumed that
libraries defined in lib/ would not have LLVM_LINK_COMPONENTS or
ARG_LINK_COMPONENTS set. This is only true because libraries
defined lib lib/ use LLVMBuild.txt and don't set these values.
This code has been fixed now to check if the library has been
explicitly marked as a component library, which should now make it
easier to remove LLVMBuild at some point in the future.
I have tested this patch on Windows, MacOS and Linux with release builds
and the following combinations of CMake options:
- "" (No options)
- -DLLVM_BUILD_LLVM_DYLIB=ON
- -DLLVM_LINK_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_BUILD_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_LINK_LLVM_DYLIB=ON
Reviewers: beanz, smeenai, compnerd, phosek
Reviewed By: beanz
Subscribers: wuzish, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, mgorny, mehdi_amini, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, steven_wu, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, dang, Jim, lenary, s.egerton, pzheng, sameer.abuasal, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70179
This recommits 089c0f5814, which was
reverted due to failing tests on big endian machines. It includes a fix
which I believe (I don't have BE machine) should fix this issue. The fix
consists of correcting the invocation DWARFYAML::EmitDebugSections,
which was missing one (default) function arguments, and so didn't
actually force the little-endian mode.
The original commit message follows.
Summary:
This patch adds DWARFDie::getLocations, which returns the location
expressions for a given attribute (typically DW_AT_location). It handles
both "inline" locations and references to the external location list
sections (currently only of the DW_FORM_sec_offset type). It is
implemented on top of DWARFUnit::findLoclistFromOffset, which is also
added in this patch. I tried to make their signatures similar to the
equivalent range list functionality.
The actual location list interpretation logic is in
DWARFLocationTable::visitAbsoluteLocationList. This part is not
equivalent to the range list code, but this deviation is motivated by a
desire to reuse the same location list parsing code within lldb.
The functionality is tested via a c++ unit test of the DWARFDie API.
Reviewers: dblaikie, JDevlieghere, SouraVX
Subscribers: mgorny, hiraditya, cmtice, probinson, llvm-commits, aprantl
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70394
Summary:
This patch adds DWARFDie::getLocations, which returns the location
expressions for a given attribute (typically DW_AT_location). It handles
both "inline" locations and references to the external location list
sections (currently only of the DW_FORM_sec_offset type). It is
implemented on top of DWARFUnit::findLoclistFromOffset, which is also
added in this patch. I tried to make their signatures similar to the
equivalent range list functionality.
The actual location list interpretation logic is in
DWARFLocationTable::visitAbsoluteLocationList. This part is not
equivalent to the range list code, but this deviation is motivated by a
desire to reuse the same location list parsing code within lldb.
The functionality is tested via a c++ unit test of the DWARFDie API.
Reviewers: dblaikie, JDevlieghere, SouraVX
Subscribers: mgorny, hiraditya, cmtice, probinson, llvm-commits, aprantl
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70394
This reapplies c0f6ad7d1f with an
additional fix in test/DebugInfo/X86/constant-loclist.ll, which had a
slightly different output on windows targets. The test now accounts for
this difference.
The original commit message follows.
Summary:
As discussed in D70081, this adds the ability to dump section
names/indices to the location list dumper. It does this by moving the
range specific logic from DWARFDie.cpp:dumpRanges into the
DWARFAddressRange class.
The trickiest part of this patch is the backflip in the meanings of the
two dump flags for the location list sections.
The dumping of "raw" location list data is now controlled by
"DisplayRawContents" flag. This frees up the "Verbose" flag to be used
to control whether we print the section index. Additionally, the
DisplayRawContents flag is set for section-based dumps whenever the
--verbose option is passed, but this is not done for the "inline" dumps.
Also note that the index dumping currently does not work for the DWARF
v5 location lists, as the parser does not fill out the appropriate
fields. This will be done in a separate patch.
Reviewers: dblaikie, probinson, JDevlieghere, SouraVX
Subscribers: sdardis, hiraditya, jrtc27, atanasyan, arphaman, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70227
Summary:
As discussed in D70081, this adds the ability to dump section
names/indices to the location list dumper. It does this by moving the
range specific logic from DWARFDie.cpp:dumpRanges into the
DWARFAddressRange class.
The trickiest part of this patch is the backflip in the meanings of the
two dump flags for the location list sections.
The dumping of "raw" location list data is now controlled by
"DisplayRawContents" flag. This frees up the "Verbose" flag to be used
to control whether we print the section index. Additionally, the
DisplayRawContents flag is set for section-based dumps whenever the
--verbose option is passed, but this is not done for the "inline" dumps.
Also note that the index dumping currently does not work for the DWARF
v5 location lists, as the parser does not fill out the appropriate
fields. This will be done in a separate patch.
Reviewers: dblaikie, probinson, JDevlieghere, SouraVX
Subscribers: sdardis, hiraditya, jrtc27, atanasyan, arphaman, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70227
This only implements the non-dwo part, but loclistx is necessary to use
location lists in DWARFv5, so it's a precursor to that work - and
generally reduces relocations (only using one reloc, then
indexes/relative offsets for all location list references) in non-split
DWARF.
Summary:
This adds a visitLocationList function to the DWARF v4 location lists,
similar to what already exists for DWARF v5. It follows the approach
outlined in previous patches (D69672), where the parsed form is always
stored in the DWARF v5 format, which makes it easier for generic code to
be built on top of that. v4 location lists are "upgraded" during
parsing, and then this upgrade is undone while dumping.
Both "inline" and section-based dumping is rewritten to reuse the
existing "generic" location list dumper. This means that the output
format is consistent for all location lists (the only thing one needs to
implement is the function which prints the "raw" form of a location
list), and that debug_loc dumping correctly processes base address
selection entries, etc.
The previous existing debug_loc functionality (e.g.,
parseOneLocationList) is rewritten on top of the new API, but it is not
removed as there is still code which uses them. This will be done in
follow-up patches, after I build the API to access the "interpreted"
location lists in a generic way (as that is what those users really
want).
Reviewers: dblaikie, probinson, JDevlieghere, aprantl, SouraVX
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69847
Summary:
This removes the use of zero as a base address in section-based dumping.
Although this will often be true for (unlinked) object files with a
single compile unit, it is not true in general. This means that
section-based dumping will not be able to resolve entries referencing
the base address (DW_LLE_offset_pair) -- it wasn't able to do that
correctly before either, but now it will be more explicit about it. One
exception to that is if the location list contains an explicit
DW_LLE_base_address entry -- in this case the dumper will pick it up,
and resolve subsequent entries normally.
The patch also removes the fallback to zero in the "inline" dumping in
case the compile unit does not contain a base address.
Reviewers: dblaikie, probinson, JDevlieghere, aprantl, SouraVX
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70115
Summary:
This avoid the need to duplicate the location lists searching logic in
various users. The "inline location list dumping" code (which is the
only user actually updated to handle DWARF v5 location lists) is
switched to this method. After adding v4 location list support, I'll
switch other users too.
Reviewers: dblaikie, probinson, JDevlieghere, aprantl, SouraVX
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70084
Summary:
This patch extracts the logic for computing the "absolute" locations,
which was partially present in the debug_loclists dumper, completes it,
and moves it into a separate function. This makes it possible to later
reuse the same logic for uses other than dumping.
The dumper is changed to reuse the location list interpreter, and its
format is changed somewhat. In "verbose" mode it prints the "raw" value
of a location list, the interpreted location (if available) and the
expression itself. In non-verbose mode it prints only one of the
location forms: it prefers the interpreted form, but falls back to the
"raw" format if interpretation is not possible (for instance, because we
were not given a base address, or the resolution of indirect addresses
failed).
This patch also undos some of the changes made in D69672, namely the
part about making all functions static. The main reason for this is that
I learned that the original approach (dumping only fully resolved
locations) meant that it was impossible to rewrite one of the existing
tests. To make that possible (and make the "inline location" dump work
in more cases), I now reuse the same dumping mechanism as is used for
section-based dumping. As this required having more objects know about
the various location lists classes, it seemed like a good idea to create
an interface abstracting the difference between them.
Therefore, I now create a DWARFLocationTable class, which will serve as
a base class for the location list classes. DWARFDebugLoclists is made
to inherit from that. DWARFDebugLoc will follow.
Another positive effect of this change is that section-based dumping
code will not need to use templates (as originally) envisioned, and that
the argument lists of the dumping functions become shorter.
Reviewers: dblaikie, probinson, JDevlieghere, aprantl, SouraVX
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70081
The macinfo support was broken for LTO situations, by terminating
macinfo lists only once - multiple macinfo contributions were correctly
labeled, but they all continued/flowed into later contributions until
only one terminator appeared at the end of the section.
Correctly terminate each contribution & fix the parsing to handle this
situation too. The parsing fix is also necessary for dumping linked
binaries - the previous code would stop at the end of the first
contribution - missing all later contributions in a linked binary.
It'd be nice to improve the dumping to print the offsets of each
contribution so it'd be easier to know which CU AT_macro_info refers to
which macinfo contribution.
Summary:
This patch stems from the discussion D68270 (including some offline
talks). The idea is to provide an "incremental" api for parsing location
lists, which will avoid caching or materializing parsed data. An
additional goal is to provide a high level location list api, which
abstracts the differences between different encoding schemes, and can be
used by users which don't care about those (such as LLDB).
This patch implements the first part. It implements a call-back based
"visitLocationList" api. This function parses a single location list,
calling a user-specified callback for each entry. This is going to be
the base api, which other location list functions (right now, just the
dumping code) are going to be based on.
Future patches will do something similar for the v4 location lists, and
add a mechanism to translate raw entries into concrete address ranges.
Reviewers: dblaikie, probinson, JDevlieghere, aprantl, SouraVX
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69672
Summary:
Handling relocations was not needed when the loclists section was a
DWO-only thing. But since DWARF5, it is possible to use it in regular
objects too, and the standard permits embedding addresses into the
section directly. These addresses need to be relocated in unlinked
files.
Reviewers: JDevlieghere, dblaikie, probinson
Subscribers: aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68271
off_t apparently is just "long" on Win64, which is 32-bits, and
therefore not long enough to compare with UINT32_MAX. Use auto to follow
the surrounding code. uint64_t would also be fine.
Currently injected-sources-native.test fails with "Expected<T>
value was in success state.
(Note: Expected<T> values in success mode must still be checked
prior to being destroyed)"
when llvm is compiled with LLVM_ENABLE_ABI_BREAKING_CHECKS in Release.
The problem is that getStringForID returns Expected<StringRef>
and Expected value must always be checked, even if it is in success state.
Checking with assert only helps in Debug and is wrong.
Differential revision: https://reviews.llvm.org/D69251
llvm-svn: 375492
It returns just a section_iterator currently and have a report_fatal_error call inside.
This change adds a way to return errors and handle them on caller sides.
The patch also changes/improves current users and adds test cases.
Differential revision: https://reviews.llvm.org/D69167
llvm-svn: 375408
Introduced in r374582, Michael Spencer pointed out this broke the
modules build due to a missing tblgen dependency on
llvm/IR/Attributes.inc.
Michael fixed the dependency in r374827.
So this removes the inclusion and the new dependency (effectively
reverting r374827 and including the alternative fix of removing rather
than supporting the new dependency).
Thanks for the quick fix/notice, Michael!
llvm-svn: 374831
A previous commit made libLLVMDebugInfoDWARF depend on the LLVM_Bitcode module which depends on the LLVM_intrinsic_gen module which depends on "llvm/IR/Attributes.inc" which is a generated header not depended on by libLLVMDebugInfo. Add that dependency.
llvm-svn: 374827
A common pattern in Windows is to have all your precompiled headers
use an object named stdafx.obj. If you've got a project with many
different static libs, you might use a separate PCH for each one of
these.
During the final link step, a file from A might reference the PCH
object from A, but it will have the same name (stdafx.obj) as any
other PCH from another project. The only difference will be the
path. For example, A might be A/stdafx.obj while B is B/stdafx.obj.
The existing algorithm checks only the filename that was passed on
the command line (or stored in archive), but this is insufficient in
the case where relative paths are used, because depending on the
command line object file / library order, it might find the wrong
PCH object first resulting in a signature mismatch.
The fix here is to simply check whether the absolute path of the
PCH object (which is stored in the input obj file for the file that
references the PCH) *ends with* the full relative path of whatever
is specified on the command line (or is in the archive).
Differential Revision: https://reviews.llvm.org/D66431
llvm-svn: 374442
This patch adds the ability to create GSYM files with GsymCreator, and read them with GsymReader. Full testing has been added for both new classes.
This patch differs from the original patch https://reviews.llvm.org/D53379 in that is uses a StringTableBuilder class from llvm instead of a custom version. Support for big and little endian files has been added. If the endianness matches the current host, we use efficient extraction for the header, address table and address info offset tables.
Differential Revision: https://reviews.llvm.org/D68744
llvm-svn: 374381
(specifying an underlying type for the enum might also be suitable - but
this seems better/as good, since there's a clear expectation this can
contain values other than the actual enumerators of this enum)
llvm-svn: 374196
David added the JamCRC implementation in r246590. More recently, Eugene
added a CRC-32 implementation in r357901, which falls back to zlib's
crc32 function if present.
These checksums are essentially the same, so having multiple
implementations seems unnecessary. This replaces the CRC-32
implementation with the simpler one from JamCRC, and implements the
JamCRC interface in terms of CRC-32 since this means it can use zlib's
implementation when available, saving a few bytes and potentially making
it faster.
JamCRC took an ArrayRef<char> argument, and CRC-32 took a StringRef.
This patch changes it to ArrayRef<uint8_t> which I think is the best
choice, and simplifies a few of the callers nicely.
Differential revision: https://reviews.llvm.org/D68570
llvm-svn: 374148
Summary:
The functions different in two ways:
- getLLVMRegNum could return both "eh" and "other" dwarf register
numbers, while getLLVMRegNumFromEH only returned the "eh" number.
- getLLVMRegNum asserted if the register was not found, while the second
function returned -1.
The second distinction was pretty important, but it was very hard to
infer that from the function name. Aditionally, for the use case of
dumping dwarf expressions, we needed a function which can work with both
kinds of number, but does not assert.
This patch solves both of these issues by merging the two functions into
one, returning an Optional<unsigned> value. While the same thing could
be achieved by adding an "IsEH" argument to the (renamed)
getLLVMRegNumFromEH function, it seemed better to avoid the confusion of
two functions and put the choice of asserting into the hands of the
caller -- if he checks the Optional value, he can safely process
"untrusted" input, and if he blindly dereferences the Optional, he gets
the assertion.
I've updated all call sites to the new API, choosing between the two
options according to the function they were calling originally, except
that I've updated the usage in DWARFExpression.cpp to use the "safe"
method instead, and added a test case which would have previously
triggered an assertion failure when processing (incorrect?) dwarf
expressions.
Reviewers: dsanders, arsenm, JDevlieghere
Subscribers: wdng, aprantl, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67154
llvm-svn: 372710
Make the method MachOUniversalBinary::getObjectForArch return MachOUniversalBinary::ObjectForArch
and add helper methods MachOUniversalBinary::getMachOObjectForArch, MachOUniversalBinary::getArchiveForArch
for those who explicitly expect to get a MachOObjectFile or an Archive.
Differential revision: https://reviews.llvm.org/D67700
Test plan: make check-all
llvm-svn: 372278
This patch adds the llvm::gsym::Header class which appears at the start of a stand alone GSYM file, or in the first bytes of the GSYM data in a GSYM section within a file. Added encode and decode methods with full error handling and full tests.
Differential Revision: https://reviews.llvm.org/D67666
llvm-svn: 372149
This patch adds encoding and decoding of the FunctionInfo objects along with full error handling and tests. Full details of the FunctionInfo encoding format appear in the FunctionInfo.h header file.
Differential Revision: https://reviews.llvm.org/D67506
llvm-svn: 372135
The static analyzer is warning about a potential null dereference - but as we're in DataMemberLayoutItem we should be able to guarantee that the Symbol is a PDBSymbolData type, allowing us to use cast<PDBSymbolData> - and if not assert will fire for us.
llvm-svn: 371933
This patch adds the ability to create a gsym::LineTable object, populate it, encode and decode it and test all functionality.
The full format of the LineTable encoding is specified in the header file LineTable.h.
Differential Revision: https://reviews.llvm.org/D66602
llvm-svn: 371657
As DW_AT_rnglists_base points after the header and headers have
different sizes for DWARF32 and DWARF64, we have to use the format
of the CU to adjust the offset correctly in order to extract
the referenced range list table.
The patch also changes the type of RangeSectionBase because in DWARF64
it is 8-bytes long.
Differential Revision: https://reviews.llvm.org/D67098
llvm-svn: 371016
This patch adds the ability to encode and decode InlineInfo objects and adds test coverage. Error handling is introduced in the encoding and decoding which will be used from here on out for remaining patches.
Differential Revision: https://reviews.llvm.org/D66600
llvm-svn: 370936
Summary:
While fixing the handling of some error cases, r370363 introduced new
problems -- assertion failures due to unchecked errors (my excuse is that a very
early version of that patch used Optional<T> instead of Expected).
This patch adds proper handling of parsing errors encountered when
dumping location lists from inside DWARF DIEs, and adds a bunch of
additional tests.
I reorder the arguments of the location list dumping functions to make
them consistent, and also be able to dump the two kinds of location
lists generically.
Reviewers: JDevlieghere, dblaikie, probinson
Subscribers: aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67102
llvm-svn: 370868
Verify that the call site DWARF symbols (added during the implementation
of the debug entry values feature) are generated properly.
Differential Revision: https://reviews.llvm.org/D66865
llvm-svn: 370631
Summary:
While examining this class for possible use in lldb, I noticed two
things:
- it spits out parsing errors directly to stderr
- the loclists parser can incorrectly return valid location lists when
parsing malformed (truncated) data
I improve the stderr situation by making the parseOneLocationList
functions return Expected<T>s. The errors are still dumped to stderr by
their callers, so this is only a partial fix, but it is enough for my
use case, as I intend to parse the locations lists one by one.
I fix the behavior in the truncated scenario by using the newly
introduced DataExtractor Cursor API.
I also add tests for handling the error cases, as they currently have no
coverage.
Reviewers: dblaikie, JDevlieghere, probinson
Subscribers: lldb-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63591
llvm-svn: 370363
Summary:
This is motivated by D63591, where we realized that there isn't a really
good way of telling whether a DataExtractor is reading actual data, or
is it just returning default values because it reached the end of the
buffer.
This patch resolves that by providing a new "Cursor" class. A Cursor
object encapsulates two things:
- the current position/offset in the DataExtractor
- an error object
Storing the error object inside the Cursor enables one to use the same
pattern as the std::{io}stream API, where one can blindly perform a
sequence of reads and only check for errors once at the end of the
operation. Similarly to the stream API, as soon as we encounter one
error, all of the subsequent operations are skipped (return default
values) too, even if the would suceed with clear error state. Unlike the
std::stream API (but in line with other llvm APIs), we force the error
state to be checked through usage of llvm::Error.
Reviewers: probinson, dblaikie, JDevlieghere, aprantl, echristo
Subscribers: kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63713
llvm-svn: 370042
The full GSYM patch started with: https://reviews.llvm.org/D53379
This patch add the ability to encode data using the new llvm::gsym::FileWriter class.
FileWriter is a simplified binary data writer class that doesn't require targets, target definitions, architectures, or require any other optional compile time libraries to be enabled via the build process. This class needs the ability to seek to different spots in the binary data that it produces to fix up offsets and sizes in GSYM data. It currently uses std::ostream over llvm::raw_ostream because llvm::raw_ostream doesn't support seeking which is required when encoding and decoding GSYM data.
AddressRange objects are encoded and decoded to be relative to a base address. This will be the FunctionInfo's start address if the AddressRange is directly contained in a FunctionInfo, or a base address of the containing parent AddressRange or AddressRanges. This allows address ranges to be efficiently encoded using ULEB128 encodings as we encode the offset and size of each range instead of full addresses. This also makes encoded addresses easy to relocate as we just need to relocate one base address.
Differential Revision: https://reviews.llvm.org/D63828
llvm-svn: 369587
DWARFUnitHeader::getLength() returns uint64_t.
DWARFUnit::getLength() should do the same.
Differential Revision: https://reviews.llvm.org/D66472
llvm-svn: 369529
The type_offset field is 8 bytes long in DWARF64. The patch extends
TypeOffset to uint64_t and fixes its reading. The patch also fixes
checking of TypeOffset bounds as it was inaccurate in DWARF64 case.
Differential Revision: https://reviews.llvm.org/D66465
llvm-svn: 369378
In r368879 I made an attempt to guess the path style from the files in
the line table. After some consideration I now think this is a poor
idea. This patch undoes that behavior and instead adds an optional
argument to specify the path style. This allows us to make that decision
elsewhere where we have more information. In case of LLDB based on the
Unit.
llvm-svn: 369072
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
After switching over LLDB's line table parser to libDebugInfo, we
noticed two regressions on the Windows bot. The problem is that when
obtaining a file from the line table prologue, we append paths without
specifying a path style. This leads to incorrect results on Windows for
debug info containing Posix paths:
0x0000000000201000: /tmp\b.c, is_start_of_statement = TRUE
This patch is an attempt to fix that by guessing the path style whenever
possible.
Differential revision: https://reviews.llvm.org/D66227
llvm-svn: 368879
Changes: no changes. A fix for the clang code will be landed right on top.
Original commit message:
SectionRef::getName() returns std::error_code now.
Returning Expected<> instead has multiple benefits.
For example, it forces user to check the error returned.
Also Expected<> may keep a valuable string error message,
what is more useful than having a error code.
(Object\invalid.test was updated to show the new messages printed.)
This patch makes a change for all users to switch to Expected<> version.
Note: in a few places the error returned was ignored before my changes.
In such places I left them ignored. My intention was to convert the interface
used, and not to improve and/or the existent users in this patch.
(Though I think this is good idea for a follow-ups to revisit such places
and either remove consumeError calls or comment each of them to clarify why
it is OK to have them).
Differential revision: https://reviews.llvm.org/D66089
llvm-svn: 368826
SectionRef::getName() returns std::error_code now.
Returning Expected<> instead has multiple benefits.
For example, it forces user to check the error returned.
Also Expected<> may keep a valuable string error message,
what is more useful than having a error code.
(Object\invalid.test was updated to show the new messages printed.)
This patch makes a change for all users to switch to Expected<> version.
Note: in a few places the error returned was ignored before my changes.
In such places I left them ignored. My intention was to convert the interface
used, and not to improve and/or the existent users in this patch.
(Though I think this is good idea for a follow-ups to revisit such places
and either remove consumeError calls or comment each of them to clarify why
it is OK to have them).
Differential revision: https://reviews.llvm.org/D66089
llvm-svn: 368812
This isn't the most robust error handling API, but does allow clients to
opt-in to getting Errors they can handle. I suspect the long-term
solution would be to move away from the lazy unit parsing and have an
explicit step that parses the unit and then allows access to the other
APIs that require a parsed unit.
llvm-dwarfdump could be expanded to use this (or newer/better API) to
demonstrate the benefit of it - but for now lld will use this in a
follow-up cl which ensures lld can exit non-zero on errors like this (&
provide more descriptive diagnostics including which object file the
error came from).
(error access to later errors when parsing nested DIEs would be good too
- but, again, exposing that without it being a hassle for every consumer
may be tricky)
llvm-svn: 368377
Some of these names were abbreviated, some were not, some pluralised,
some not. Made the API difficult to use - since it's an exact 1:1
mapping to the DWARF sections - use those names (changing underscore
separation for camel casing).
llvm-svn: 368189
This updates all libraries and tools in LLVM Core to use 64-bit offsets
which directly or indirectly come to DataExtractor.
Differential Revision: https://reviews.llvm.org/D65638
llvm-svn: 368014
Using 64-bit offsets is required to fully implement 64-bit DWARF.
As these classes are used in many different libraries they should
temporarily support both 32- and 64-bit offsets.
Differential Revision: https://reviews.llvm.org/D64006
llvm-svn: 368013
Fixes e.g.
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-bootstrap-ubsan/builds/14273
We can't left shift here because left shifting of a negative number is UB.
The same doesn't apply to unsigned arithmetic, but switching to unsigned
doesn't appear to stop ubsan from complaining, so we need to mask out the
high bits.
llvm-svn: 367959
Any addresses that we pass to llvm-symbolizer are going to be untagged,
while any HWASAN instrumented globals are going to be tagged in the
symbol table. Therefore we need to untag the addresses before using them.
Differential Revision: https://reviews.llvm.org/D65769
llvm-svn: 367926
This patch exnteds the error handling in the debug line parser to get
rid of the existing MD5 assertion. I want to reuse the debug line parser
from LLVM in LLDB where we cannot crash on invalid input.
Differential revision: https://reviews.llvm.org/D64544
llvm-svn: 366762
It is necessary to generate fixups in .debug_frame or .eh_frame as
relaxation is enabled due to the address delta may be changed after
relaxation.
There is an opcode with 6-bits data in debug frame encoding. So, we
also need 6-bits fixup types.
Differential Revision: https://reviews.llvm.org/D58335
llvm-svn: 366524
It is necessary to generate fixups in .debug_frame or .eh_frame as
relaxation is enabled due to the address delta may be changed after
relaxation.
There is an opcode with 6-bits data in debug frame encoding. So, we
also need 6-bits fixup types.
Differential Revision: https://reviews.llvm.org/D58335
llvm-svn: 366442
When code relaxation is enabled many RISC-V fixups are not resolved but
instead relocations are emitted. This happens even for DWARF debug
sections. Therefore, to properly support the parsing of DWARF debug info
we need to be able to resolve RISC-V relocations. This patch adds:
* Support for RISC-V relocations in RelocationResolver
* DWARF support for two relocations per object file offset
* DWARF changes to support relocations in more DIE fields
The two relocations per offset change is needed because some RISC-V
relocations (used for label differences) come in pairs.
Relocations can also be emitted for DWARF fields where relocations were
not yet evaluated. Adding relocation support for some of these fields is
essencial. On the other hand, LLVM currently emits RISC-V relocations
for fixups that could be safely evaluated, since they can never be
affected by code relaxations. This patch also adds relocation support
for the fields affected by those extraneous relocations (the DWARF unit
entry Length, and the DWARF debug line entry TotalLength and
PrologueLength), for testing purposes.
Differential Revision: https://reviews.llvm.org/D62062
Patch by Luís Marques.
llvm-svn: 366402
- getCompression() used to return a PDB_SourceCompression even though
the docs for IDiaInjectedSource are explicit about the return value
being compiler-dependent. Return an uint32_t instead, and make the
printing code handle unknown values better by printing "Unknown" and
the int value instead of not printing any compression.
- Print compressed contents as hex dump, not as string.
- Add compression type "DotNet", which is used (at least) by csc.exe,
the C# compiler. Also add a lengthy comment describing the stream
contents (derived from looking at the raw hex contents long enough
to see the GUIDs, which led me to the roslyn and mono implementations
for handling this).
- The native injected source dumper was dumping the contents of the
whole data stream -- but csc.exe writes a stream that's padded with
zero bytes to the next 512 boundary, and the dia api doesn't display
those padding bytes. So make NativeInjectedSource::getCode() do the
same thing.
Differential Revision: https://reviews.llvm.org/D64879
llvm-svn: 366386
`pretty -native -injected-sources -injected-source-content` works with
this patch, and produces identical output to the dia version.
Differential Revision: https://reviews.llvm.org/D64428
llvm-svn: 366236
The DWARF3 documentation had inconsistency concerning the reserved range
for unit length values. The issue was fixed in DWARF4.
Differential Revision: https://reviews.llvm.org/D64622
llvm-svn: 366190
The first argument in the constructor was ignored, and the remaining
arguments were always passed as their defaults.
Differential Revision: https://reviews.llvm.org/D64407
llvm-svn: 366188
In LLDB, when parsing type units, we don't need to parse the whole line
table. Instead, we only need to parse the "support files" from the line
table prologue.
To make that possible, this patch moves the respective functions from
the LineTable into the Prologue. Because I don't think users of the
LineTable should have to know that these files come from the Prologue,
I've left the original methods in place, and made them redirect to the
LineTable.
Differential revision: https://reviews.llvm.org/D64774
llvm-svn: 366164
In LLDB, when parsing type units, we don't need to parse the whole line
table. Instead, we only need to parse the "support files" from the line
table prologue.
To make that possible, this patch moves the respective functions from
the LineTable into the Prologue. Because I don't think users of the
LineTable should have to know that these files come from the Prologue,
I've left the original methods in place, and made them redirect to the
LineTable.
Differential revision: https://reviews.llvm.org/D64774
llvm-svn: 366158
The construction was explained in
https://reviews.llvm.org/D44810?id=139526#inline-391999 but reading the code
shouldn't require hunting down old reviews to understand it.
The precomputed list was missing an entry for the empty list case, and
one entry at the very end. (The current last entry is the last one where
3 * BucketCount fits in a signed int, but the reference implementation
uses unsigneds as far as I can tell, so there's room for one more entry.)
No behavior change for inputs seen in practice.
Differential Revision: https://reviews.llvm.org/D64738
llvm-svn: 366107
The traits object is only used by a few methods. Deserializing a hash
table and walking it is possible without the traits object, so it
shouldn't be required to build a dummy object for that use case.
The TraitsT object used to be a function template parameter before
r327647, this restores it to that state.
This makes it clear that the traits object isn't needed at all in 1 of
the current 3 uses of HashTable (and I am going to add another use that
doesn't need it), and that the default PdbHashTraits isn't used outside
of tests.
While here, also re-enable 3 checks in the test that were commented out
(which requires making HashTableInternals templated and giving FooBar
an operator==).
No intended behavior change.
Differential Revision: https://reviews.llvm.org/D64640
llvm-svn: 365974
All callers had a PDBFile object at hand, so call
Pdb.createIndexedStream() instead, which pre-populates all the arguments
(and returns nullptr for kInvalidStreamIndex).
Also change safelyCreateIndexedStream() to only take the string index,
and update callers. Make the method public and call it in two places
that manually did the bounds checking before.
No intended behavior change.
Differential Revision: https://reviews.llvm.org/D64633
llvm-svn: 365936
Dump the DWARF information about call sites and call site parameters into
debug info sections.
The patch also provides an interface for the interpretation of instructions
that could load values of a call site parameters in order to generate DWARF
about the call site parameters.
([13/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60716
llvm-svn: 365467
Currently, the symbolizer lib can only symbolize a file on disk.
This patch teaches the symbolizer lib to symbolize objects.
llvm-objdump needs this to support archive disassembly with source info.
https://bugs.llvm.org/show_bug.cgi?id=41871
Reviewed by: jhenderson, grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D63521
llvm-svn: 365376
This patch removes the part which tried to interpret addresses
in that section as offsets and simplifies the remaining code.
Differential Revision: https://reviews.llvm.org/D64020
llvm-svn: 364896
Delete unnecessary getters of AddressRange.
Simplify AddressRange::size(): Start <= End check should be checked in an upper layer.
Delete isContiguousWith() that doesn't make sense.
Simplify AddressRanges::insert. Delete commented code. Fix it when more than 1 ranges are to be deleted.
Delete trailing newline.
llvm-svn: 364637
Add the IR and the AsmPrinter parts for handling of the DW_OP_entry_values
DWARF operation.
([11/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60866
llvm-svn: 364542
The full GSYM patch started with: https://reviews.llvm.org/D53379
In that patch we wanted to split up getting GSYM into the LLVM code base so we are not committing too much code at once.
This is a first in a series of patches where I only add the foundation classes along with complete unit tests. They provide the foundation for encoding and decoding a GSYM file.
File entries are defined in llvm::gsym::FileEntry. This class splits the file up into a directory and filename represented by uniqued string table offsets. This allows all files that are referred to in a GSYM file to be encoded as 1 based indexes into a global file table in the GSYM file.
Function information in stored in llvm::gsym::FunctionInfo. This object represents a contiguous address range that has a name and range with an optional line table and inline call stack information.
Line table entries are defined in llvm::gsym::LineEntry. They store only address, file and line information to keep the line tables simple and allows the information to be efficiently encoded in a subsequent patch.
Inline information is defined in llvm::gsym::InlineInfo. These structs store the name of the inline function, along with one or more address ranges, and the file and line that called this function. They also contain any child inline information.
There are also utility classes for address ranges in llvm::gsym::AddressRange, and string table support in llvm::gsym::StringTable which are simple classes.
The unit tests test all the APIs on these simple classes so they will be ready for the next patches where we will create GSYM files and parse GSYM files.
Differential Revision: https://reviews.llvm.org/D63104
llvm-svn: 364427
This command prints a description of the referenced function's stack frame.
For each formal parameter and local variable, the tool prints:
- function name
- variable name
- file/line of declaration
- FP-relative variable location (if available)
- size in bytes
- HWASAN tag offset
This information will be used by the HWASAN runtime to identify local
variables in UAR reports.
Differential Revision: https://reviews.llvm.org/D63468
llvm-svn: 364225
The test only checks the existence of the `Types CU list` line.
Unfortunately I can't make a better test because
{gcc,clang} -fuse-ld={lld,gold} --gdb-index do not give me a non-empty types CU list.
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D63537
llvm-svn: 363800
The only caller of SymbolizableObjectFile::create passes a non-null
DebugInfoContext and asserts that they do so. Move the assert into
SymbolizableObjectFile::create and remove null checks.
Differential Revision: https://reviews.llvm.org/D63298
llvm-svn: 363334
Summary: Deduplicate S_CONSTANTS when linking, if they have the same value.
Reviewers: rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63151
llvm-svn: 363089
This makes the interface simpler and more consistent with the interface for
.dSYM files and fixes a bug where llvm-symbolizer would not read the dwp if
it was asked to symbolize data before symbolizing code.
Differential Revision: https://reviews.llvm.org/D63114
llvm-svn: 363025
This allows the DWARFExpression class to handle addresses without
crashing on targets with 16-bit pointers like AVR.
This is required in order to generate assembly from clang via the '-S'
flag.
This fixes an error with the following message:
clang: llvm/include/llvm/DebugInfo/DWARF/DWARFExpression.h:132: llvm::DWARFExpression::DWARFExpression(llvm::DataExtractor, uint16_t, uint8_t):
Assertion `AddressSize == 8 || AddressSize == 4' failed.
llvm-svn: 362290
CodeView has its own register map which is defined in cvconst.h. Missing this
mapping before saving register to CodeView causes debugger to show incorrect
value for all register based variables, like variables in register and local
variables addressed by register (stack pointer + offset).
This change added mapping between LLVM register and CodeView register so the
correct register number will be stored to CodeView/PDB, it aso fixed the
mapping from CodeView register number to register name based on current
CPUType but print PDB to yaml still assumes X86 CPU and needs to be fixed.
Differential Revision: https://reviews.llvm.org/D62608
llvm-svn: 362280
This lead to errors when dumping binaries with v4 and v5 units linked
together (but could've also errored on v5 units that did/didn't use
str_offsets).
Also improves error handling and messages around invalid str_offsets
contributions.
llvm-svn: 361683
This adds `-parent-recurse-depth` which limits the number of parent DIEs
being dumped.
Differential revision: https://reviews.llvm.org/D62359
llvm-svn: 361671
This test case was incorrect because it mixed DWARF32 and DWARF64 for a
single unit (DWARF32 unit referencing a DWARF64 str_offsets section). So
fix enough of the unit parsing for DWARF64 and make the test valid.
(not sure if anyone needs DWARF64 support though - support in
libDebugInfoDWARF has been added piecemeal and LLVM doesn't produce it
at all)
llvm-svn: 361582
Summary:
This was flagged in https://www.viva64.com/en/b/0629/ under "Snippet No.
15" (see under #13). It looks like PVS studio flags nullptr checks where
the ptr is used inbetween creation and checking against nullptr.
Reviewers: JDevlieghere, probinson
Reviewed By: JDevlieghere
Subscribers: RKSimon, hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62118
llvm-svn: 361176
r360876 didn't fix 2 call sites in clang.
Expected<ArrayRef<uint8_t>> may be better but use Expected<StringRef> for now.
Follow-up of D61781.
llvm-svn: 360892
It broke the Clang build, see llvm-commits thread.
> Expected<ArrayRef<uint8_t>> may be better but use Expected<StringRef> for now.
>
> Follow-up of D61781.
llvm-svn: 360878
Follow up to r359122, after a bug was reported in it - the original
change too aggressively tried to move related types out of type units,
which included unnamed types (like array types) which can't reasonably
be declared-but-not-defined.
A step beyond that is that some types in type units can be anonymous, if
they are types with a name for linkage purposes (eg: "typedef struct { }
x;"). So ensure those don't get turned into plain declarations (without
signatures) because, lacking names, they can't be resolved to the
definition.
[Also include a fix for llvm-dwarfdump/libDebugInfoDWARF to pretty print
types in type units]
llvm-svn: 360458
Summary:
Prior to DWARF v5, a directory index of 0 represents DW_AT_comp_dir.
In DWARF v5, the index starts with 0 and Entry.DirIdx is the index into
Prologue.IncludeDirectories.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D61253
llvm-svn: 360015
Sven van Haastregt