When concatenating directory with filename in getFilenameByIndex, we
might end up with a path that contains extra dots. For example, if the
input is /path and ./example, we would return /path/./example. Run
sys::path::remove_dots on the output to eliminate unnecessary dots.
Differential Revision: https://reviews.llvm.org/D87657
Since a function might have portions of its code coming from multiple
different files, "start line" is ambiguous (it can't just be resolved
relative to the file/line specified). Add start file to disambiguate it.
When llvm-dwarfdump encounters no null terminated strings, we should
warn user about it rather than ignore it and print nothing.
Before this patch, when llvm-dwarfdump dumps a .debug_str section whose
content is "abc", it prints:
```
.debug_str contents:
```
After this patch:
```
.debug_str contents:
warning: no null terminated string at offset 0x0
```
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D86998
This patch adds a helper function DumpStrSection to simplify codes.
Besides, nonprintable chars in debug_str and debug_str.dwo sections
are printed as escaped chars.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D86918
Parsing DWARFv5 debug_loclist offsets when a CU is parsed is weighing
down memory usage of symbolizers that don't need to parse this data at
all. There's not much benefit to caching these anyway - since they are
O(1) lookup and reading once you know where the offset list starts (and
can do bounds checking with the offset list size too).
In general, I think it might be time to start paying down some of the
technical debt of loc/loclist/range/rnglist parsing to try to unify it a
bit more.
eg:
* Currently DWARFUnit has: RangeSection, RangeSectionBase, LocSection,
LocSectionBase, LocTable, RngListTable, LoclistTableHeader (be nice if
these were all wrapped up in two variables - one for loclists, one for
rnglists)
* rnglists and loclists are handled differently (see:
LoclistTableHeader, but no RnglistTableHeader)
* maybe all these types could be less stateful - lazily parse what they
need to, even reparsing rather than caching because it doesn't seem
too expensive, for instance. (though admittedly so long as it's
constantcost/overead per compilatiton that's probably adequate)
* Maybe implementing and using a DWARFDataExtractor that can be
sub-ranged (so we could slice it up to just the single contribution) -
though maybe that's not so useful because loc/ranges need to refer to
it by absolute, not contribution-relative mechanisms
Differential Revision: https://reviews.llvm.org/D86110
dumpStringOffsetsSection() expects the size of a contribution to be
correctly aligned. The patch adds the corresponding verifications for
pre-v5 cases.
Differential Revision: https://reviews.llvm.org/D85739
Note that DWARFUnit::getAbbreviations() returns nullptr if the
abbreviations could not be read, but callers used the returned
pointer without checking.
Differential Revision: https://reviews.llvm.org/D85738
Allow the GNU .debug_macro extension to be parsed and printed by
llvm-dwarfdump. In an upcoming patch support will be added for emitting
that format also.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D82974
Although the DWARF specification states that .debug_aranges entries
can't have length zero, these can occur in the wild. There's no
particular reason to enforce this part of the spec, since functionally
they have no impact. The patch removes the error and introduces a new
warning for premature terminator entries which does not stop parsing.
This is a relanding of cb3a598c87, adding the missing obj2yaml part
that was needed.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46805. See also
https://reviews.llvm.org/D71932 which originally introduced the error.
Reviewed by: ikudrin, dblaikie, Higuoxing
Differential Revision: https://reviews.llvm.org/D85313
Although the DWARF specification states that .debug_aranges entries
can't have length zero, these can occur in the wild. There's no
particular reason to enforce this part of the spec, since functionally
they have no impact. The patch removes the error and introduces a new
warning for premature terminator entries which does not stop parsing.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46805. See also
https://reviews.llvm.org/D71932 which originally introduced the error.
Reviewed by: ikudrin, dblaikie
Differential Revision: https://reviews.llvm.org/D85313
We already need to include raw_ostream.h, also add missing StringRef.h and cstdint implicit dependencies.
Remove unnecessary includes from PDBExtras.cpp
LTO builds have been creating invalid DWARF and one of the errors was a file index that was out of bounds. "llvm-dwarfdump --verify" will check all file indexes for line tables already, but there are no checks for the validity of file indexes in attributes.
The verification will verify if there is a DW_AT_decl_file/DW_AT_call_file that:
- there is a line table for the compile unit
- the file index is valid
- the encoding is appropriate
Tests are added that test all of the above conditions.
Differential Revision: https://reviews.llvm.org/D84817
-Use the actual sect/offset to keep track of symbols in the cache so they don't get created multiple times with different addresses.
-Remove getSymTag from PDBFunctionSymbol/PDBPublicSymbol because it's already implemented in the base class
-Merge the symbolizer test files for DIA and native, since the tests are the same.
-Implement getCompilandId for NativeLineNumber
Reviewed By: amccarth
Differential Revision: https://reviews.llvm.org/D84208
DWARFListTableHeader::length() handles the zero value of HeaderData.Length
in a special way, which makes the result different from the calculated
value of FullLength, which leads to triggering an assertion. The patch
moves the assertion a bit later when `FullLength` is already checked for
minimal allowed value.
Differential Revision: https://reviews.llvm.org/D82886
When building in Debug on Windows-MSVC after b7402edce3, a lot of tests were failing because we were dereferencing an element past the end of HashRecords. This happened towards the end of the table, in unused slots.
The patch adds checking for various potential issues in parsing name
lookup tables and reporting them as recoverable errors, similarly as we
do for other tables.
Differential Revision: https://reviews.llvm.org/D83050
The parsing method did not check reading errors and might easily fall
into an infinite loop on an invalid input because of that.
Differential Revision: https://reviews.llvm.org/D83049
This adds the --debug-vars option to llvm-objdump, which prints
locations (registers/memory) of source-level variables alongside the
disassembly based on DWARF info. A vertical line is printed for each
live-range, with a label at the top giving the variable name and
location, and the position and length of the line indicating the program
counter range in which it is valid.
Differential revision: https://reviews.llvm.org/D70720
There are following issues with `CFIProgram::parse` code:
1) Invalid CFI opcodes were never tested. And currently a test would fail
when the `LLVM_ENABLE_ABI_BREAKING_CHECKS` is enabled. It happens because
the `DataExtractor::Cursor C` remains unchecked when the
"Invalid extended CFI opcode" error is reported:
```
.eh_frame section at offset 0x1128 address 0x0:
Program aborted due to an unhandled Error:
Error value was Success. (Note: Success values must still be checked prior to being destroyed).
```
2) It is impossible to reach the "Invalid primary CFI opcode" error with the current code.
There are 3 possible primary opcode values and all of them are handled. Hence this error
should be replaced with llvm_unreachable.
3) Errors currently reported are upper-case.
This patch refines the code in the `CFIProgram::parse` method to fix all issues mentioned
and adds unit tests for all possible invalid extended CFI opcodes.
Differential revision: https://reviews.llvm.org/D82868
Previously, the debug line parser would keep attempting to read data
even if it had run out of data to read. This meant errors in parsing
would often end up being reported as something else, such as an unknown
version or malformed directory/filename table. This patch fixes the
issues by using the Cursor API to capture errors.
Reviewed by: labath
Differential Revision: https://reviews.llvm.org/D83043
This reduces peak memory on my test case from 1960.14MB to 1700.63MB
(-260MB, -13.2%) with no measurable impact on CPU time. I'm currently
working with a publics stream that is about 277MB. Before this change,
we would allocate 277MB of heap memory, serialize publics into them,
hold onto that heap memory, open the PDB, and commit into it. After
this change, we defer the serialization until commit time.
In the last change I made to public writing, I re-sorted the list of
publics multiple times in place to avoid allocating new temporary data
structures. Deferring serialization until later requires that we don't
reorder the publics. Instead of sorting the publics, I partially
construct the hash table data structures, store a publics index in them,
and then sort the hash table data structures. Later, I replace the index
with the symbol record offset.
This change also addresses a FIXME and moves the list of global and
public records from GSIHashStreamBuilder to GSIStreamBuilder. Now that
publics aren't being serialized, it makes even less sense to store them
as a list of CVSymbol records. The hash table used to deduplicate
globals is moved as well, since that is specific to globals, and not
publics.
Reviewed By: aganea, hans
Differential Revision: https://reviews.llvm.org/D81296
Currently when the .eh_frame section is truncated so that
CFI instructions can't be read, it is possible to enter
an infinite loop.
It happens because `CFIProgram::parse` does not handle errors properly.
This patch fixes the issue.
Differential revision: https://reviews.llvm.org/D82017
Previously, if there was an error whilst parsing the operands of an
extended opcode, the operands would be treated as zero and printed. This
could potentially be slightly confusing. This patch changes the
behaviour to print the raw bytes instead.
Reviewed by: ikudrin
Differential Revision: https://reviews.llvm.org/D81570
Summary: Previous code would try to verify DW_AT_ranges and if any ranges would overlap, it would stop attributing any ranges after this to the DIE which caused incorrect errors to be reported that a DIE's address ranges were not contained in the parent DIE's ranges. Added a fix and a test.
Reviewers: aprantl, labath, probinson, JDevlieghere, jhenderson
Subscribers: hiraditya, MaskRay, cmtice, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79962
Current LLVM implementation uses `MCAsmInfo::CodePointerSize` as addr_size when emitting the DWARF data. llvm-dwarfdump, on the other hand, handles `addr_size`s of 4 and 8 properly and considers all other sizes as an error. This works for most of mainline targets except for MSP430 and AVR.
msp430-gcc v8.3.1 emits DWARF32 with addr_size = 4 (DWARF32 does not imply addr_size = 4, 32 refers to internal offset width of 4 bytes) that is handled by llvm-dwarfdump already. Still, emitting 2-byte target pointers on MSP430 seems correct as well (but not for MSP430X that is supported by msp430-gcc but not by LLVM and has 20-bit address space).
This patch make it possible for MSP430 debug info support to be tested with llvm-dwarfdump.
Differential Revision: https://reviews.llvm.org/D82055
This is a natural extension of the previous changes to use the Cursor
class independently in the standard and extended opcode paths, and in
turn allows delaying error handling until the entire line has been
printed in verbose mode, removing interleaved output in some cases.
Reviewed by: MaskRay, JDevlieghere
Differential Revision: https://reviews.llvm.org/D81562
Standard opcodes usually have ULEB128 arguments, so it is generally not
possible to recover from such errors. This patch causes the parser to
stop parsing the table in such situations.
Also don't emit the operands or add data to the table if there is an
error reading these opcodes.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D81470
Summary:
This makes the code easier to reason about, as it will behave the same
way regardless of whether there is any more data coming after the
presumed end of the prologue.
Reviewers: jhenderson, dblaikie, probinson, ikudrin
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77557
The verbose printing of unrecognised standard opcodes was broken in
multiple ways (additional blank lines, a closing parenthesis without
opening parenthesis and so on). This patch fixes it, and makes the
output more consistent with other opcodes.
The new line printing for debug line verbose output was inconsistent.
For new rows in the matrix, a blank line followed, whilst the
DW_LNS_copy opcode actually resulted in two blank lines. There was also
potential inconsistency in the blank lines at the end of the table. This
patch mostly resolves these issues - no blank lines appear in the output
except for a single line after the prologue and at table end to separate
it from any subsquent table, plus some instances after error messages.
Also add a unit test for verbose output to test the fine details of new
line placement and other aspects of verbose output.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D81102
Petr Hosek