Implemented support to AArch64 codegen for ARMv8.1 Large System
Extensions atomic instructions. Where supported, these instructions can
provide atomic operations with higher performance.
Currently supported operations include: fetch_add, fetch_or, fetch_xor,
fetch_smin, fetch_min/max (signed and unsigned), swap, and
compare_exchange.
This implementation implies sequential-consistency ordering, more
relaxed ordering is under development.
Subtarget->hasLSE is currently supported for Cavium ThunderX2T99.
Patch by Ananth Jasty.
Differential Revision: https://reviews.llvm.org/D33586
Change-Id: I82f6d3d64255622791ceb0715b7ab9f4dc4d4b2c
llvm-svn: 305893
Summary:
This function retries an operation if it was interrupted by a signal
(failed with EINTR). It's inspired by the TEMP_FAILURE_RETRY macro in
glibc, but I've turned that into a template function. I've also added a
fail-value argument, to enable the function to be used with e.g.
fopen(3), which is documented to fail for any reason that open(2) can
fail (which includes EINTR).
The main user of this function will be lldb, but there were also a
couple of uses within llvm that I could simplify using this function.
Reviewers: zturner, silvas, joerg
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D33895
llvm-svn: 305892
There should be at most a single kill flag for the
promoted operand between the store/load pair.
Discussed in https://reviews.llvm.org/D34402.
llvm-svn: 305889
This patch adds one more condition in selection DINS/INS
instruction, which fixes MultiSource/Applications/JM/ldecod/
for mips32r2 (and mips64r2 n32 abi).
Differential Revision: https://reviews.llvm.org/D33725
llvm-svn: 305888
Converts to range-loop usage in machine scheduler.
This makes the code neater and easier to read,
and also keeps pace of the machine scheduler
implementation with C++11 features.
Reviewed by: Matthias Braun
Differential Revision: https://reviews.llvm.org/D34320
llvm-svn: 305887
Summary: Previously there were two separate pseudo instruction for SDWA on VI and on GFX9. Created one pseudo instruction that is union of both of them. Added verifier to check that operands conform either VI or GFX9.
Reviewers: dp, arsenm, vpykhtin
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, artem.tamazov
Differential Revision: https://reviews.llvm.org/D34026
llvm-svn: 305886
Summary:
This patch updates promoteLoadFromStore to use the store MachineOperand as the
source operand of the of the new instruction instead of creating a new
register MachineOperand. This way, the existing register flags are
preserved.
This fixes PR33468 (https://bugs.llvm.org/show_bug.cgi?id=33468).
Reviewers: MatzeB, t.p.northover, junbuml
Reviewed By: MatzeB
Subscribers: aemerson, rengolin, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D34402
llvm-svn: 305885
Add support for combining a build vector to a shuffle.
When the build vector is of extracted elements from 2 vectors (vec1, vec2) where vec2 is 2 times smaller than vec1.
llvm-svn: 305883
MulOpsInlineThreshold option of SCEV is defaulted to 1000, which is inadequately high.
When constructing SCEVs of expressions like:
x1 = a * a
x2 = x1 * x1
x3 = x2 * x2
...
We actually have huge SCEVs with max allowed amount of operands inlined.
Such expressions are easy to get from unrolling of loops looking like
x = a
for (i = 0; i < n; i++)
x = x * x
Or more tricky cases where big powers are involved. If some non-linear analysis
tries to work with a SCEV that has 1000 operands, it may lead to excessively long
compilation. The attached test does not pass within 1 minute with default threshold.
This patch decreases its default value to 32, which looks much more reasonable if we
use analyzes with complexity O(N^2) or O(N^3) working with SCEV.
Differential Revision: https://reviews.llvm.org/D34397
llvm-svn: 305882
Summary:
When we're building with XRay instrumentation, we use a trick that
preserves references from the function to a function sled index. This
index table lives in a separate section, and without this trick the
linker is free to garbage-collect this section and all the segments it
refers to. Until we're able to tell the linkers to preserve these
sections, we use this reference trick to keep around both the index and
the entries in the instrumentation map.
Before this change we emitted both a synthetic reference to the label in
the instrumentation map, and to the entry in the function map index.
This change removes the first synthetic reference and only emits one
synthetic reference to the index -- the index entry has the references
to the labels in the instrumentation map, so the linker will still
preserve those if the function itself is preserved.
This reduces the amount of synthetic references we emit from 16 bytes to
just 8 bytes in x86_64, and similarly to other platforms.
Reviewers: dblaikie
Subscribers: javed.absar, kpw, pelikan, llvm-commits
Differential Revision: https://reviews.llvm.org/D34340
llvm-svn: 305880
Right now areMemoryOpsAliased has an assertion justified as:
MMO1 should have a value due it comes from operation we'd like to use
as implicit null check.
assert(MMO1->getValue() && "MMO1 should have a Value!");
However, it is possible for that invariant to not be upheld in the
following situation (conceptually):
Null check %RAX
NotNullSucc:
%RAX = LEA %RSP, 16 // I0
%RDX = MOV64rm %RAX // I1
With the current code, we will have an early exit from
ImplicitNullChecks::isSuitableMemoryOp on I0 with SR_Unsuitable.
However, I1 will look plausible (since it loads from %RAX) and
will go ahead and call areMemoryOpsAliased(I1, I0). This will cause
us to fail the assert mentioned above since I1 does not load from an
IR level value and thus is allowed to have a non-Value base address.
The fix is to bail out earlier whenever we see an unsuitable
instruction overwrite PointerReg. This would guarantee that when we
call areMemoryOpsAliased, we're guaranteed to be looking at an
instruction that loads from or stores to an IR level value.
Original Patch Author: sanjoy
Reviewers: sanjoy, mkazantsev, reames
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34385
llvm-svn: 305879
We weren't actually checking for duplicated stores, as the condition
was always actually false. This was found by Coverity, and I have
no clue how to trigger this in real-world code (although I
tried for a bit).
llvm-svn: 305867
We forgot to serialize these because llvm-readobj didn't dump them. They
are typically all zeros in an object file. The linker fills them in with
relocations before adding them to the PDB. Now we can properly round
trip these symbols through pdb2yaml -> yaml2pdb.
I made these fields optional with a zero default so that we can elide
them from our test cases.
llvm-svn: 305857
This reverts commit r305852.
The testcase already exists but I moved it to the X86 directory on a
using a different machine and got confused...
llvm-svn: 305856
The instruction it falls over on is an IMPLICT_DEF that also happens
to be the only instruction in its lexical scope. That LexicalScope has
never been created because its range is empty. This patch skips over
all meta-instructions instead of just DBG_VALUEs.
Thanks to David Blaikie for providing a testcase!
llvm-svn: 305853
This is a workaround for large file writes. It has been witnessed that
write(2) failing with EINVAL (22) due to a large value (>2G). Thanks to
James Knight for the help with coming up with a sane test case.
llvm-svn: 305846
In the object file, the section index and relative offset are typically
zero, so make these YAML fields optional with a default.
It looks like there may be more partially initialized symbol records,
but this should fix the msan bot.
llvm-svn: 305842
If there is an immediate operand we shall not shrink V_SUBB_U32
and V_ADDC_U32, it does not fit e32 encoding.
Differential Revison: https://reviews.llvm.org/D34291
llvm-svn: 305840
This commit causes LLVM_USE_SANITIZER to now accept the "Leaks" option. This
will cause cmake to pass in -fsanitize=leak in all of the appropriate places.
I am making this change so that I can setup a linux bot that only detects
leaks.
llvm-svn: 305839
Before it was possible to partially fold use instructions
before the defs. After the xor is folded into a copy, the same
mov can end up in the fold list twice, so on the second attempt
it will fail expecting to see a register to fold.
llvm-svn: 305821
There were certain fields that we didn't know how to write, as
well as various padding bytes that we would ignore. This leads
to garbage data in the PDB. While not strictly necessary, we
should initialize these bytes to something meaningful, as it
makes for easier binary comparison between PDBs.
llvm-svn: 305819
This does some improvements/cleanup to the recently introduced
scavengeRegisterBackwards() functionality:
- Rewrite findSurvivorBackwards algorithm to use the existing
LiveRegUnit::accumulateBackward() code. This also avoids the Available
and Candidates bitset and just need 1 LiveRegUnit instance
(= 1 bitset).
- Pick registers in allocation order instead of register number order.
llvm-svn: 305817
Simon Pilgrim