This required untangling a mess of headers that included around.
This a recommit of r210953 with a fix for the removed accessor
for JITInfo.
llvm-svn: 211233
fat files containing archives.
Also fix a bug in MachOUniversalBinary::ObjectForArch::ObjectForArch()
where it needed a >= when comparing the Index with the number of
objects in a fat file. As the index starts at 0.
llvm-svn: 211230
The difference from rint isn't really relevant here,
so treat them as equivalent. OpenCL doesn't have nearbyint,
so this is sort of pointless other than for completeness.
llvm-svn: 211229
This contains all the previous patches + getlod support on top of it.
It doesn't use SDNodes anymore, so it's quite small.
It also adds v16i8 to SReg_128, which is used for the sampler descriptor.
Reviewed-by: Tom Stellard
llvm-svn: 211228
This change has a bit of a trickle down effect due to the fact that
there are a number of derived implementations of ExecutionEngine,
and that the mutex is not tightly encapsulated so is used by other
classes directly.
Reviewed by: rnk
Differential Revision: http://reviews.llvm.org/D4196
llvm-svn: 211214
LLVMGetBitcodeModuleInContext should not take ownership on error. I will
try to localize this odd api requirement, but this should get the bots green.
llvm-svn: 211213
We do have use cases for the bitcode reader owning the buffer or not, but we
always know which one we have when we construct it.
It might be possible to simplify this further, but this is a step in the
right direction.
llvm-svn: 211205
When emitting optimization remarks, we test for the presence of
instruction locations by testing for a valid llvm.dbg.cu annotation.
This is slightly inefficient because we can simply ask whether the
debug location we have is known or not.
Additionally, if my current plan works, I will need to remove the
llvm.dbg.cu annotation from the IL (or prevent it from being generated)
when -Rpass is used without -g. In those cases, we'll want to generate
line tables but we will want to prevent code generation from emitting
DWARF code for them.
Tested on x86_64.
llvm-svn: 211204
When looking at the 64-bit SVR4 indirect call sequence, I noticed
an unnecessary load of r12. And indeed the code says:
// R12 must contain the address of an indirect callee.
But this is not correct; in the 64-bit SVR4 (ELFv1) ABI, there is
no need to load r12 at this point. It seems this code and comment
is a remnant of code originally shared with the Darwin ABI ...
This patch simply removes the unnecessary load.
llvm-svn: 211203
ARMTargetStreamer implements ConstantPool and AssmeblerConstantPools
to keep track of assembler-generated constant pools that are used for
ldr-pseudo.
When implementing ldr-pseudo for AArch64, these two classes can be reused.
So this patch factors them out from ARM target to the general MC lib.
llvm-svn: 211198
During an indirect function call sequence on the 64-bit SVR4 ABI,
generate code must load and then restore the TOC register.
This does not use a regular LOAD instruction since the TOC
register r2 is marked as reserved. Instead, the are two
special instruction patterns:
let RST = 2, DS = 2 in
def LDinto_toc: DSForm_1a<58, 0, (outs), (ins g8rc:$reg),
"ld 2, 8($reg)", IIC_LdStLD,
[(PPCload_toc i64:$reg)]>, isPPC64;
let RST = 2, DS = 10, RA = 1 in
def LDtoc_restore : DSForm_1a<58, 0, (outs), (ins),
"ld 2, 40(1)", IIC_LdStLD,
[(PPCtoc_restore)]>, isPPC64;
Note that these not only restrict the destination of the
load to r2, but they also restrict the *source* of the
load to particular address combinations. The latter is
a problem when we want to support the ELFv2 ABI, since
there the TOC save slot is no longer at 40(1).
This patch replaces those two instructions with a single
instruction pattern that only hard-codes r2 as destination,
but supports generic addresses as source. This will allow
supporting the ELFv2 ABI, and also helps generate more
efficient code for calls to absolute addresses (allowing
simplification of the ppc64-calls.ll test case).
llvm-svn: 211193
Note that I followed the AVX2 convention here and didn't add LLVM intrinsics
for stores. These can be generated with the nontemporal hint on LLVM IR
stores (see new test). The GCC builtins are lowered directly into nontemporal
stores.
<rdar://problem/17082571>
llvm-svn: 211176
The PowerPC back-end uses BLA to implement calls to functions at
known-constant addresses, which is apparently used for certain
system routines on Darwin.
However, with the 64-bit SVR4 ABI, this is actually incorrect.
An immediate function pointer value on this platform is not
directly usable as a target address for BLA:
- in the ELFv1 ABI, the function pointer value refers to the
*function descriptor*, not the code address
- in the ELFv2 ABI, the function pointer value refers to the
global entry point, but BL(A) would only be correct when
calling the *local* entry point
This bug didn't show up since using immediate function pointer
values is not usually done in the 64-bit SVR4 ABI in the first
place. However, I ran into this issue with a certain use case
of LLVM as JIT, where immediate function pointer values were
uses to implement callbacks from JITted code to helpers in
statically compiled code.
Fixed by simply not using BLA with the 64-bit SVR4 ABI.
llvm-svn: 211174
My patch r204634 to emit instructions in little-endian format failed to
handle those special cases where we emit a pair of instructions from a
single LLVM MC instructions (like the bl; nop pairs used to implement
the call sequence).
In those cases, we still need to emit the "first" instruction (the one
in the more significant word) first, on both big and little endian,
and not swap them.
llvm-svn: 211171
Summary:
The assembler tries to reuse the destination register for memory operations whenever
it can but it's not possible to do so if the destination register is not a GPR.
Example:
ldc1 $f0, sym
should expand to:
lui $at, %hi(sym)
ldc1 $f0, %lo(sym)($at)
It's entirely wrong to expand to:
lui $f0, %hi(sym)
ldc1 $f0, %lo(sym)($f0)
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4173
llvm-svn: 211169
Summary:
This patch doesn't really change the logic behind expandMemInst but it allows
us to assemble .S files that use .set noat with some macros. For example:
.set noat
lw $k0, offset($k1)
Can expand to:
lui $k0, %hi(offset)
addu $k0, $k0, $k1
lw $k0, %lo(offset)($k0)
with no need to access $at.
Reviewers: dsanders, vmedic
Reviewed By: dsanders, vmedic
Differential Revision: http://reviews.llvm.org/D4159
llvm-svn: 211165
Summary:
Added negative test case so that we can be sure we handle erroneous situations
while parsing the .cpsetup directive.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3681
llvm-svn: 211160
It looks like there are two versions of LowerCallTo here: the
SelectionDAGBuilder one is designed to operate on LLVM IR, and the
TargetLowering one in the case where everything is at DAG level.
Previously, only the SelectionDAGBuilder variant could handle demoting
an impossible return to sret semantics (before delegating to the
TargetLowering version), but this functionality is also useful for
certain libcalls (e.g. 128-bit operations on 32-bit x86). So this
commit moves the sret handling down a level.
rdar://problem/17242889
llvm-svn: 211155
Summary:
Provides an abstraction for a random number generator (RNG) that produces a stream of pseudo-random numbers.
The current implementation uses C++11 facilities and is therefore not cryptographically secure.
The RNG is salted with the text of the current command line invocation.
In addition, a user may specify a seed (reproducible builds).
In clang, the seed can be set via
-frandom-seed=X
In the back end, the seed can be set via
-rng-seed=X
This is the llvm part of the patch.
clang part: D3391
Reviewers: ahomescu, rinon, nicholas, jfb
Reviewed By: jfb
Subscribers: jfb, perl
Differential Revision: http://reviews.llvm.org/D3390
llvm-svn: 211145
ReconstructShuffle() may wrongly creat a CONCAT_VECTOR trying to
concat 2 of v2i32 into v4i16. This commit is to fix this issue and
try to generate UZP1 instead of lots of MOV and INS.
Patch is initalized by Kevin Qin, and refactored by Tim Northover.
llvm-svn: 211144
This patch is a follow up to r211040 & r211052. Rather than bailing out of fast
isel this patch will generate an alternate instruction (movabsq) instead of the
leaq. While this will always have enough room to handle the 64 bit displacment
it is generally over kill for internal symbols (most displacements will be
within 32 bits) but since we have no way of communicating the code model to the
the assmebler in order to avoid flagging an absolute leal/leaq as illegal when
using a symbolic displacement.
llvm-svn: 211130
Eric Christopher