to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
The callee address is added as an optional operand (MCSymbol) in
AdjustInstrPostInstrSelection() and then used by asm printer to insert:
'.reloc tmplabel, R_MIPS_JALR, symbol
tmplabel:'.
Controlled with '-mips-jalr-reloc', default is true.
Differential revision: https://reviews.llvm.org/D56694
llvm-svn: 351485
The `sigrie` instruction signals a Reserved Instruction Exception.
This patch adds support for assembling / disassembling the instruction.
Differential Revision: http://reviews.llvm.org/D53861
llvm-svn: 346230
This patch provides mitigation for CVE-2017-5715, Spectre variant two,
which affects the P5600 and P6600. It implements the LLVM part of
-mindirect-jump=hazard. It is _not_ enabled by default for the P5600.
The migitation strategy suggested by MIPS for these processors is to use
hazard barrier instructions. 'jalr.hb' and 'jr.hb' are hazard
barrier variants of the 'jalr' and 'jr' instructions respectively.
These instructions impede the execution of instruction stream until
architecturally defined hazards (changes to the instruction stream,
privileged registers which may affect execution) are cleared. These
instructions in MIPS' designs are not speculated past.
These instructions are used with the attribute +use-indirect-jump-hazard
when branching indirectly and for indirect function calls.
These instructions are defined by the MIPS32R2 ISA, so this mitigation
method is not compatible with processors which implement an earlier
revision of the MIPS ISA.
Performance benchmarking of this option with -fpic and lld using
-z hazardplt shows a difference of overall 10%~ time increase
for the LLVM testsuite. Certain benchmarks such as methcall show a
substantially larger increase in time due to their nature.
Reviewers: atanasyan, zoran.jovanovic
Differential Revision: https://reviews.llvm.org/D43486
llvm-svn: 325653
Introduced FSELECT node necesary when lowering ISD::SELECT
which has i32, f64, f64 as its operands.
SEL_D instruction required that its output and first operand
of a SELECT node, which it used, have matching types.
MTC1_D64 node introduced to aid FSELECT lowering.
This fixes machine verifier errors on following tests:
CodeGen/Mips/llvm-ir/select-dbl.ll
CodeGen/Mips/llvm-ir/select-flt.ll
CodeGen/Mips/select.ll
Differential Revision: https://reviews.llvm.org/D35408
llvm-svn: 308595
After fixing (r306173) a failing test in the lld test suite (r306173),
reland r306095.
Original commit message:
[mips] Fix register positions in the aui/daui instructions
Swapped the position of the rt and rs register in the aui/daui
instructions for mips32r6 and mips64r6. With this change, the format of
the generated instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
llvm-svn: 306174
ELF/mips-plt-r6.s in lld-test is failing. Reverting the change.
Original commit message:
[mips] Fix register positions in the aui/daui instructions
Swapped the position of the rt and rs register in the aut/daui
instructions for mips32r6 and mips64r6. With this change, the format of
the generated instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
llvm-svn: 306099
Swapped the position of the rt and rs register in the aut/daui instructions
for mips32r6 and mips64r6. With this change, the format of the generated
instructions complies with specifications and GCC.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D33988
llvm-svn: 306095
Clean up the implementation of divide macro expansion by getting rid of a
FIXME regarding magic numbers and branch instructions. Match GAS' behaviour
for expansion of ddiv / div in the two and three operand cases. Add the two
operand alias for MIPSR6. Finally, optimize macro expansion cases where the
divisior is the $zero register.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D29887
llvm-svn: 294960
For compatiblity with binutils, define these instructions to take
two registers with a 16bit unsigned immediate. Both of the registers
have to be same for dahi and dati.
Reviewers: dsanders, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D21473
llvm-svn: 284218
These instructions were only defined for microMIPSR6 previously. Add
definitions for MIPSR6, correct definitions for microMIPSR6, flag these
instructions as having unmodelled side effects (they disable/enable
virtual processors) and add missing disassember tests for microMIPSR6.
Reviewers: vkalintiris
Differential Review: https://reviews.llvm.org/D24291
llvm-svn: 284115
For compatiblity with binutils, define these instructions to take
two registers with a 16bit unsigned immediate. Both of the registers
have to be same for dahi and dati.
Reviewers: vkalintiris, dsanders, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D21473
llvm-svn: 281724
Extend instruction definitions from nearly all ISAs to include
appropriate instruction itineraries. Change MIPS16s gp prologue
generation to use real instructions instead of using a pseudo
instruction.
Reviewers: dsanders, vkalintiris
Differential Review: https://reviews.llvm.org/D23548
llvm-svn: 279623
r277708 enabled tails calls for MIPS but used the 'jr' instruction when the
jump target was held in a register. For MIPSR6, 'jalr $zero, $reg' should
have been used. Additionally, add missing patterns for external and global
symbols for tail calls.
Reviewers: dsanders, vkalintiris
Differential Review: https://reviews.llvm.org/D23301
llvm-svn: 279064
Enable tail calls by default for (micro)MIPS(64).
microMIPS is slightly more tricky than doing it for MIPS(R6) or microMIPSR6.
microMIPS has two instruction encodings: 16bit and 32bit along with some
restrictions on the size of the instruction that can fill the delay slot.
For safe tail calls for microMIPS, the delay slot filler attempts to find
a correct size instruction for the delay slot of TAILCALL pseudos.
Reviewers: dsanders, vkalintris
Subscribers: jfb, dsanders, sdardis, llvm-commits
Differential Revision: https://reviews.llvm.org/D21138
llvm-svn: 277708
PR27458 highlights that the MIPS backend does not have well formed
MIR for atomic operations (among other errors).
This patch adds expands and corrects the LL/SC descriptions and uses
for MIPS(64).
Reviewers: dsanders, vkalintiris
Differential Review: http://reviews.llvm.org/D19719
llvm-svn: 272655
Commit r266977 was reason for failing LLVM test suite with error message: fatal error: error in backend: Cannot select: t17: i32 = rotr t2, t11 ...
llvm-svn: 267418
Alias 'jic $reg, 0' to 'jrc $reg' and 'jialc $reg, 0' to 'jalrc $reg' like
binutils.
This patch was previous committed as r266055 as seemed to have caused some spurious
test failures. They did not reappear after further local testing.
llvm-svn: 266301
Differential Revision: http://reviews.llvm.org/D17137
This patch was reverted after the revertion of dependant patch http://reviews.llvm.org/D17068.
There was the problem with test-suite failure.
The problem is hopefully solved with dependant patch so this patch is commited again.
llvm-svn: 266179
Summary:
Alias 'jic $reg, 0' to 'jrc $reg' and 'jialc $reg, 0' to 'jalrc $reg' like
binutils.
Reviewers: dsanders
Differential Revision: http://reviews.llvm.org/D18856
llvm-svn: 266055
This patch adds support for compact jumps similiar to the previous compact
branch support for MIPSR6. Unlike compact branches, compact jumps do not
have a forbidden slot.
As MipsInstrInfo::getEquivalentCompactForm can determine the correct
expansion for jumps and branches for both microMIPS and MIPSR6, remove the
unnecessary distinction in the delay slot filler.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
llvm-svn: 265390
Summary:
MIPSR6 introduces a class of branches called compact branches. Unlike the
traditional MIPS branches which have a delay slot, compact branches do not
have a delay slot. The instruction following the compact branch is only
executed if the branch is not taken and must not be a branch.
It works by generating compact branches for MIPS32R6 when the delay slot
filler cannot fill a delay slot. Then, inspecting the generated code for
forbidden slot hazards (a compact branch with an adjacent branch or other
CTI) and inserting nops to clear this hazard.
Patch by Simon Dardis.
Reviewers: vkalintiris, dsanders
Subscribers: MatzeB, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D16353
llvm-svn: 263444
Simon Atanasyan