- Decouples RegisterContext_x86_64 from UserArea.
- Restores the original definition of UserArea so that it can be used to generate offsets for use with ptrace.
- Moves UserArea to the 64-bit Linux specialization.
- Also fixes an off-by-one error for the size of m_gpr.
- Also adds a TODO comment noting the need for a mechanism to identify the correct plugin based on the target OS (and architecture).
Reviewed by: Matt Kopec and Samuel Jacob
llvm-svn: 181055
PowerPC assemblers are supposed to support a stand-alone '$' symbol
as an alternative of '.' to refer to the current PC. This does not
work in the LLVM assembler parser yet.
To avoid bootstrap failures when using the LLVM assembler as system
assembler, this patch modifies the assembler source code generated
by LLVM to avoid using '$' (and simply use '.' instead).
llvm-svn: 181054
This patch adds support for PowerPC platform-specific variant
kinds in MCSymbolRefExpr::getVariantKindForName, and also
adds a test case to verify they are translated to the appropriate
fixup type.
llvm-svn: 181053
This patch adds a couple of Book II instructions (isync, icbi) to the
PowerPC assembler parser. These are needed when bootstrapping clang
with the integrated assembler forced on, because they are used in
inline asm statements in the code base.
The test case adds the full list of Book II storage control instructions,
including associated extended mnemonics. Again, those that are not yet
supported as marked as FIXME.
llvm-svn: 181052
This patch adds infrastructure to support extended mnemonics in the
PowerPC assembler parser. It adds support specifically for those
extended mnemonics that LLVM will itself generate.
The test case lists *all* extended mnemonics according to the
PowerPC ISA v2.06 Book I, but marks those not yet supported
as FIXME.
llvm-svn: 181051
This adds assembler parser support to the PowerPC back end.
The parser will run for any powerpc-*-* and powerpc64-*-* triples,
but was tested only on 64-bit Linux. The supported syntax is
intended to be compatible with the GNU assembler.
The parser does not yet support all PowerPC instructions, but
it does support anything that is generated by LLVM itself.
There is no support for testing restricted instruction sets yet,
i.e. the parser will always accept any instructions it knows,
no matter what feature flags are given.
Instruction operands will be checked for validity and errors
generated. (Error handling in general could still be improved.)
The patch adds a number of test cases to verify instruction
and operand encodings. The tests currently cover all instructions
from the following PowerPC ISA v2.06 Book I facilities:
Branch, Fixed-point, Floating-Point, and Vector.
Note that a number of these instructions are not yet supported
by the back end; they are marked with FIXME.
A number of follow-on check-ins will add extra features. When
they are all included, LLVM passes all tests (including bootstrap)
when using clang -cc1as as the system assembler.
llvm-svn: 181050
Add serialization for captured statements and captured decls. Also add
a const_capture_iterator to CapturedStmt.
Test contributed by Wei Pan
Differential Revision: http://llvm-reviews.chandlerc.com/D727
llvm-svn: 181048
This function consists of following steps:
1. Collect dependent memory accesses.
2. Analyze availability.
3. Perform fully redundancy elimination, or
4. Perform PRE, depending on the availability
Step 2, 3 and 4 are now moved to three helper routines.
llvm-svn: 181047
Improvements to the std::map data formatter to recognize when invalid memory is being explored and bail out instead of looping for a potentially very long time
llvm-svn: 181044
Move the creation of CapturedStmt parameters out of CodeGen and into
Sema, making it easier to customize the outlined function. The
ImplicitParamDecls are stored in the CapturedDecl using an
ASTContext-allocated array.
Differential Revision: http://llvm-reviews.chandlerc.com/D722
llvm-svn: 181043
its fields.
This removes false dependencies between DSP instructions which access different
fields of the the control register. Implicit register operands are added to
instructions RDDSP and WRDSP after instruction selection, depending on the
value of the mask operand.
llvm-svn: 181041
By supporting the vectorization of PHINodes with more than two incoming values we can increase the complexity of nested if statements.
We can now vectorize this loop:
int foo(int *A, int *B, int n) {
for (int i=0; i < n; i++) {
int x = 9;
if (A[i] > B[i]) {
if (A[i] > 19) {
x = 3;
} else if (B[i] < 4 ) {
x = 4;
} else {
x = 5;
}
}
A[i] = x;
}
}
llvm-svn: 181037
It is preferable for a unit test to be responsible for creating its own input
data instead of relying on checked-in data files. Now the IncludeExcludeTest
for cpp11-migrate does this.
- Removed old data files.
- Updated build system and lit files to remove references to old data files.
llvm-svn: 181029
Another step towards reinstating the SystemZ backend. I'll commit
the configure changes separately (TARGET_HAS_JIT etc.), then commit
a patch to enable the MCJIT tests on SystemZ.
llvm-svn: 181015
The llvm::sys::AddSignalHandler function (as well as related routines) in
lib/Support/Unix/Signals.inc currently registers a signal handler routine
via "sigaction". When this handler is called due to a SIGSEGV, SIGILL or
similar signal, it will show a stack backtrace, deactivate the handler,
and then simply return to the operating system. The intent is that the
OS will now retry execution at the same location as before, which ought
to again trigger the same error condition and cause the same signal to be
delivered again. Since the hander is now deactivated, the OS will take
its default action (usually, terminate the program and possibly create
a core dump).
However, this method doesn't work reliably on System Z: With certain
signals (namely SIGILL, SIGFPE, and SIGTRAP), the program counter stored
by the kernel on the signal stack frame (which is the location where
execution will resume) is not the instruction that triggered the fault,
but then instruction *after it*. When the LLVM signal handler simply
returns to the kernel, execution will then resume at *that* address,
which will not trigger the problem again, but simply go on and execute
potentially unrelated code leading to random errors afterwards.
To fix this, the patch simply goes and re-raises the signal in question
directly from the handler instead of returning from it. This is done
only on System Z and only for those signals that have this particular
problem.
llvm-svn: 181010
Build attribute sections can now be read if they exist via ELFObjectFile, and
the llvm-readobj tool has been extended with an option to dump this information
if requested. Regression tests are also included which exercise these features.
Also update the docs with a fixed ARM ABI link and a new link to the Addenda
which provides the build attributes specification.
llvm-svn: 181009
MSVC provides __wchar_t, either as an alias for the built-in wchar_t
type, or as a separate type depending on language (C vs C++) and flags
(-fno-wchar).
In -fms-extensions, Clang will simply accept __wchar_t as an alias for
whatever type is used for wide character literals. In -fms-compatibility, we
try to mimic MSVC's behavior by always making __wchar_t a builtin type.
This fixes PR15815.
llvm-svn: 181004
a lambda.
Bug #1 is that CGF's CurFuncDecl was "stuck" at lambda invocation
functions. Fix that by generally improving getNonClosureContext
to look through lambdas and captured statements but only report
code contexts, which is generally what's wanted. Audit uses of
CurFuncDecl and getNonClosureAncestor for correctness.
Bug #2 is that lambdas weren't specially mapping 'self' when inside
an ObjC method. Fix that by removing the requirement for that
and using the normal EmitDeclRefLValue path in LoadObjCSelf.
rdar://13800041
llvm-svn: 181000
FindLastStoreBRVisitor is responsible for finding where a particular region
gets its value; if the region is a VarRegion, it's possible that value was
assigned at initialization, i.e. at its DeclStmt. However, if a function is
called recursively, the same DeclStmt may be evaluated multiple times in
multiple stack frames. FindLastStoreBRVisitor was not taking this into
account and just picking the first one it saw.
<rdar://problem/13787723>
llvm-svn: 180997
There were actually two bugs here:
- if we decided to look for an interesting lvalue or call expression, we
wouldn't go find its node if we also knew we were at a (different) call.
- if we looked through one message send with a nil receiver, we thought we
were still looking at an argument to the original call.
Put together, this kept us from being able to track the right values, which
means sub-par diagnostics and worse false-positive suppression.
Noticed by inspection.
llvm-svn: 180996
Ashok Thirumurthi