70de4cb1cd
Use empty() instead of comparing size() with zero.
...
llvm-svn: 46514
2008-01-29 13:02:09 +00:00
f3ebc3f3d2
Remove attribution from file headers, per discussion on llvmdev.
...
llvm-svn: 45418
2007-12-29 20:36:04 +00:00
26ee54eb05
Clean up previous patch: PHI uses should not prevent iv reuse if all other uses are addresses. This trades a constant multiply for one fewer iv.
...
llvm-svn: 45251
2007-12-20 02:20:53 +00:00
e2a8ba7fec
Allow iv reuse if the user is a PHI node which is in turn used as addresses.
...
llvm-svn: 45230
2007-12-19 23:33:23 +00:00
7d97662467
Remove indeterminism from a loop. We think this will
...
fix an occasional nonrepeatable bootstrap failure we've
been seeing on Darwin.
llvm-svn: 44202
2007-11-17 02:48:01 +00:00
240c1adade
At end of LSR, replace uses of now constant (as result of SplitCriticalEdge) PHI node with the constant value.
...
llvm-svn: 43533
2007-10-30 23:45:15 +00:00
c2dbfee43f
It's not safe to tell SplitCriticalEdge to merge identical edges. It may delete the phi instruction that's being processed.
...
llvm-svn: 43524
2007-10-30 22:27:26 +00:00
b024c4c81d
- Bug fixes.
...
- Allow icmp rewrite using an iv / stride of a smaller integer type.
llvm-svn: 43480
2007-10-29 22:07:18 +00:00
7414e21ec0
Update a comment to reflect the current code.
...
llvm-svn: 43463
2007-10-29 19:32:39 +00:00
f5feb01056
Remove an unused function argument.
...
llvm-svn: 43462
2007-10-29 19:31:25 +00:00
50d42224d0
Fix a typo in a comment.
...
llvm-svn: 43461
2007-10-29 19:26:14 +00:00
8e8adada83
Avoid calling ValidStride when not all uses are addresses.
...
llvm-svn: 43460
2007-10-29 19:23:53 +00:00
9dbe99dcd6
A number of LSR fixes:
...
- ChangeCompareStride only reuse stride that is larger than current stride. It
will let the general reuse mechanism to try to reuse a smaller stride.
- Watch out for multiplication overflow in ChangeCompareStride.
- Replace std::set with SmallPtrSet.
llvm-svn: 43408
2007-10-26 23:08:19 +00:00
d78a3e5555
Fix a crash. Make sure TLI is not null.
...
llvm-svn: 43384
2007-10-26 17:24:46 +00:00
7f3d02471d
Loosen up iv reuse to allow reuse of the same stride but a larger type when truncating from the larger type to smaller type is free.
...
e.g.
Turns this loop:
LBB1_1: # entry.bb_crit_edge
xorl %ecx, %ecx
xorw %dx, %dx
movw %dx, %si
LBB1_2: # bb
movl L_X$non_lazy_ptr, %edi
movw %si, (%edi)
movl L_Y$non_lazy_ptr, %edi
movw %dx, (%edi)
addw $4, %dx
incw %si
incl %ecx
cmpl %eax, %ecx
jne LBB1_2 # bb
into
LBB1_1: # entry.bb_crit_edge
xorl %ecx, %ecx
xorw %dx, %dx
LBB1_2: # bb
movl L_X$non_lazy_ptr, %esi
movw %cx, (%esi)
movl L_Y$non_lazy_ptr, %esi
movw %dx, (%esi)
addw $4, %dx
incl %ecx
cmpl %eax, %ecx
jne LBB1_2 # bb
llvm-svn: 43375
2007-10-26 01:56:11 +00:00
29e29e63bd
Do not rewrite compare instruction using iv of a different stride if the new
...
stride may be rewritten using the stride of the compare instruction.
llvm-svn: 43367
2007-10-25 22:45:20 +00:00
5a38108374
Remove code that's commented out.
...
llvm-svn: 43356
2007-10-25 18:38:24 +00:00
133694db06
If a loop termination compare instruction is the only use of its stride,
...
and the compaison is against a constant value, try eliminate the stride
by moving the compare instruction to another stride and change its
constant operand accordingly. e.g.
loop:
...
v1 = v1 + 3
v2 = v2 + 1
if (v2 < 10) goto loop
=>
loop:
...
v1 = v1 + 3
if (v1 < 30) goto loop
llvm-svn: 43336
2007-10-25 09:11:16 +00:00
e0c3d9f338
Strength reduction improvements.
...
- Avoid attempting stride-reuse in the case that there are users that
aren't addresses. In that case, there will be places where the
multiplications won't be folded away, so it's better to try to
strength-reduce them.
- Several SSE intrinsics have operands that strength-reduction can
treat as addresses. The previous item makes this more visible, as
any non-address use of an IV can inhibit stride-reuse.
- Make ValidStride aware of whether there's likely to be a base
register in the address computation. This prevents it from thinking
that things like stride 9 are valid on x86 when the base register is
already occupied.
Also, XFAIL the 2007-08-10-LEA16Use32.ll test; the new logic to avoid
stride-reuse elimintes the LEA in the loop, so the test is no longer
testing what it was intended to test.
llvm-svn: 43231
2007-10-22 20:40:42 +00:00
a37eaf2bf9
Move the SCEV object factors from being static members of the individual
...
SCEV subclasses to being non-static member functions of the ScalarEvolution
class.
llvm-svn: 43224
2007-10-22 18:31:58 +00:00
b6c05b1f90
Fix stride computations for long double arrays.
...
llvm-svn: 42508
2007-10-01 23:08:35 +00:00
2740694450
wrap some long lines. Major offenders that are left include
...
gvn, gvnpre, dse, and predsimplify. To see these, use:
make check-line-length
llvm-svn: 40738
2007-08-02 16:53:43 +00:00
34d442f274
More explicit keywords.
...
llvm-svn: 40673
2007-08-01 15:32:29 +00:00
8c4da37b1f
Use SCEVExpander::InsertCastOfTo instead of calling new IntToPtrInst
...
directly, because the insert point used by the SCEVExpander may vary
from what LSR originally computes.
llvm-svn: 40641
2007-07-31 17:22:27 +00:00
32f53bbd85
Rename ScalarEvolution::deleteInstructionFromRecords to
...
deleteValueFromRecords and loosen the types to all it to accept
Value* instead of just Instruction*, since this is what
ScalarEvolution uses internally anyway. This allows more flexibility
for future uses.
llvm-svn: 37657
2007-06-19 14:28:31 +00:00
cb9e09ad57
Add a SCEV class and supporting code for sign-extend expressions.
...
This created an ambiguity for expandInTy to decide when to use
sign-extension or zero-extension, but it turns out that most of its callers
don't actually need a type conversion, now that LLVM types don't have
explicit signedness. Drop expandInTy in favor of plain expand, and change
the few places that actually need a type conversion to do it themselves.
llvm-svn: 37591
2007-06-15 14:38:12 +00:00
df6355ccf8
Use DominatorTree instead of ETForest.
...
llvm-svn: 37499
2007-06-07 21:42:15 +00:00
1b7b6e76ec
Fix PR1495 and CodeGen/X86/2007-06-05-LSR-Dominator.ll
...
llvm-svn: 37454
2007-06-06 01:23:55 +00:00
e8bd53c36a
Handle negative strides much more optimally. This compiles X86/lsr-negative-stride.ll
...
into:
_t:
movl 8(%esp), %ecx
movl 4(%esp), %eax
cmpl %ecx, %eax
je LBB1_3 #bb17
LBB1_1: #bb
cmpl %ecx, %eax
jg LBB1_4 #cond_true
LBB1_2: #cond_false
subl %eax, %ecx
cmpl %ecx, %eax
jne LBB1_1 #bb
LBB1_3: #bb17
ret
LBB1_4: #cond_true
subl %ecx, %eax
cmpl %ecx, %eax
jne LBB1_1 #bb
jmp LBB1_3 #bb17
instead of:
_t:
subl $4, %esp
movl %esi, (%esp)
movl 12(%esp), %ecx
movl 8(%esp), %eax
cmpl %ecx, %eax
je LBB1_4 #bb17
LBB1_1: #bb.outer
movl %ecx, %edx
negl %edx
LBB1_2: #bb
cmpl %ecx, %eax
jle LBB1_5 #cond_false
LBB1_3: #cond_true
addl %edx, %eax
cmpl %ecx, %eax
jne LBB1_2 #bb
LBB1_4: #bb17
movl (%esp), %esi
addl $4, %esp
ret
LBB1_5: #cond_false
movl %ecx, %edx
subl %eax, %edx
movl %eax, %esi
addl %esi, %esi
cmpl %ecx, %esi
je LBB1_4 #bb17
LBB1_6: #cond_false.bb.outer_crit_edge
movl %edx, %ecx
jmp LBB1_1 #bb.outer
llvm-svn: 37252
2007-05-19 01:22:21 +00:00
1480e16596
significantly improve debug output of lsr
...
llvm-svn: 36996
2007-05-11 22:40:34 +00:00
2bcbd5b7ca
Use IntrinsicInst to test for prefetch instructions, which is ever so
...
slightly nicer than using CallInst with an extra check; thanks Chris.
llvm-svn: 36743
2007-05-04 14:59:09 +00:00
3fbb18d1b6
Allow strength reduction to make use of addressing modes for the
...
address operand in a prefetch intrinsic.
llvm-svn: 36713
2007-05-03 23:20:33 +00:00
8c78a0bff0
Drop 'const'
...
llvm-svn: 36662
2007-05-03 01:11:54 +00:00
e95c6ad802
Use 'static const char' instead of 'static const int'.
...
Due to darwin gcc bug, one version of darwin linker coalesces
static const int, which defauts PassID based pass identification.
llvm-svn: 36652
2007-05-02 21:39:20 +00:00
09f162ca6a
Do not use typeinfo to identify pass in pass manager.
...
llvm-svn: 36632
2007-05-01 21:15:47 +00:00
38bc86f057
Fix
...
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20070423/048333.html
llvm-svn: 36380
2007-04-23 22:42:03 +00:00
f35a1dbc7a
Remove ImmediateDominator analysis. The same information can be obtained from DomTree. A lot of code for
...
constructing ImmediateDominator is now folded into DomTree construction.
This is part of the ongoing work for PR217.
llvm-svn: 36063
2007-04-15 08:47:27 +00:00
efd3051d60
Now that codegen prepare isn't defeating me, I can finally fix what I set
...
out to do! :)
This fixes a problem where LSR would insert a bunch of code into each MBB
that uses a particular subexpression (e.g. IV+base+C). The problem is that
this code cannot be CSE'd back together if inserted into different blocks.
This patch changes LSR to attempt to insert a single copy of this code and
share it, allowing codegenprepare to duplicate the code if it can be sunk
into various addressing modes. On CodeGen/ARM/lsr-code-insertion.ll,
for example, this gives us code like:
add r8, r0, r5
str r6, [r8, #+4]
..
ble LBB1_4 @cond_next
LBB1_3: @cond_true
str r10, [r8, #+4]
LBB1_4: @cond_next
...
LBB1_5: @cond_true55
ldr r6, LCPI1_1
str r6, [r8, #+4]
instead of:
add r10, r0, r6
str r8, [r10, #+4]
...
ble LBB1_4 @cond_next
LBB1_3: @cond_true
add r8, r0, r6
str r10, [r8, #+4]
LBB1_4: @cond_next
...
LBB1_5: @cond_true55
add r8, r0, r6
ldr r10, LCPI1_1
str r10, [r8, #+4]
Besides being smaller and more efficient, this makes it immediately
obvious that it is profitable to predicate LBB1_3 now :)
llvm-svn: 35972
2007-04-13 20:42:26 +00:00
780c009756
switch LSR to use isLegalAddressingMode instead of other simpler hooks
...
llvm-svn: 35837
2007-04-09 22:20:14 +00:00
8763ba1b88
Completely purge DomSet. This is the (hopefully) final patch for PR1171.
...
llvm-svn: 35731
2007-04-07 07:17:27 +00:00
81e0707552
split some code out into a helper function
...
llvm-svn: 35615
2007-04-03 05:11:24 +00:00
f3197a7d53
allow -1 strides to reuse "1" strides.
...
llvm-svn: 35607
2007-04-02 22:51:58 +00:00
28e0e4e11e
Pass the type of the store access, not the type of the store, into the
...
target hook. This allows us to codegen a loop as:
LBB1_1: @cond_next
mov r2, #0
str r2, [r0, +r3, lsl #2 ]
add r3, r3, #1
cmn r3, #1
bne LBB1_1 @cond_next
instead of:
LBB1_1: @cond_next
mov r2, #0
str r2, [r0], #+4
add r3, r3, #1
cmn r3, #1
bne LBB1_1 @cond_next
This looks the same, but has one fewer induction variable (and therefore,
one fewer register) live in the loop.
llvm-svn: 35592
2007-04-02 06:34:44 +00:00
8fe3cbe6bd
print the type of an inserted IV in -debug mode.
...
llvm-svn: 35563
2007-04-01 22:21:39 +00:00
e5866e7b89
Look through bitcast when finding IVs. (Chris' patch really.)
...
llvm-svn: 35347
2007-03-26 03:01:27 +00:00
bacf4acf65
do not share old induction variables when this would result in invalid
...
instructions (that would have to be split later)
llvm-svn: 35227
2007-03-20 21:54:54 +00:00
1baf5c84ab
Fix some VC++ warnings.
...
llvm-svn: 35224
2007-03-20 20:43:18 +00:00
e3a02be5f1
use types of loads and stores, not address, in CheckForIVReuse
...
llvm-svn: 35197
2007-03-20 00:47:50 +00:00
b5eb932c93
Correct type info for isLegalAddressImmediate() check.
...
llvm-svn: 35086
2007-03-13 20:34:37 +00:00
720acdfb31
Use new TargetLowering addressing modes hooks.
...
llvm-svn: 35072
2007-03-12 23:27:37 +00:00
58818c530f
Increment iterator now because IVUseShouldUsePostIncValue may remove
...
User from the list of I users.
llvm-svn: 35051
2007-03-09 21:19:53 +00:00
b0743b5d6a
Now LoopStrengthReduce is a LoopPass.
...
llvm-svn: 34984
2007-03-06 21:14:09 +00:00
53a3739c80
Finally get this patch right :)
...
Replace expensive getZExtValue() == 0 calls with isZero() calls.
llvm-svn: 34861
2007-03-02 23:51:25 +00:00
ba547cbb2a
Dang, I've done that twice now! Undo previous commit.
...
llvm-svn: 34860
2007-03-02 23:37:53 +00:00
558990e189
Use more efficient test for one value in a ConstantInt.
...
llvm-svn: 34859
2007-03-02 23:35:28 +00:00
197adfaa0a
Reverse a premature commital.
...
llvm-svn: 34822
2007-03-02 00:31:39 +00:00
2e54a15943
Prefer non-virtual calls to ConstantInt::isZero over virtual calls to
...
Constant::isNullValue() in situations where it is possible.
llvm-svn: 34821
2007-03-02 00:28:52 +00:00
c473d8e431
Privatize StructLayout::MemberOffsets, adding an accessor
...
llvm-svn: 34156
2007-02-10 19:55:17 +00:00
557ab15e71
Apply the VISIBILITY_HIDDEN field to the remaining anonymous classes in
...
the Transforms library. This reduces debug library size by 132 KB, debug
binary size by 376 KB, and reduces link time for llvm tools slightly.
llvm-svn: 33939
2007-02-05 23:32:05 +00:00
03c4953cdd
rename Type::isIntegral to Type::isInteger, eliminating the old Type::isInteger.
...
rename Type::getIntegralTypeMask to Type::getIntegerTypeMask.
This makes naming much more consistent. For example, there are now no longer any
instances of IntegerType that are not considered isInteger! :)
llvm-svn: 33225
2007-01-15 02:27:26 +00:00
1942249c5b
Eliminate calls to isInteger, generalizing code and tightening checks as needed.
...
llvm-svn: 33218
2007-01-15 01:55:30 +00:00
bf96e02a54
For PR1097:
...
Enable complex addressing modes on 64-bit platforms involving two induction
variables by keeping a size and scale in 64-bits not 32.
Patch by Dan Gohman.
llvm-svn: 33011
2007-01-08 16:17:51 +00:00
3fe98ae10a
no need to worry about int vs uint any more.
...
llvm-svn: 32946
2007-01-06 01:37:35 +00:00
c635f47d9a
For PR950:
...
This patch replaces signed integer types with signless ones:
1. [US]Byte -> Int8
2. [U]Short -> Int16
3. [U]Int -> Int32
4. [U]Long -> Int64.
5. Removal of isSigned, isUnsigned, getSignedVersion, getUnsignedVersion
and other methods related to signedness. In a few places this warranted
identifying the signedness information from other sources.
llvm-svn: 32785
2006-12-31 05:48:39 +00:00
266e42b312
For PR950:
...
This patch removes the SetCC instructions and replaces them with the ICmp
and FCmp instructions. The SetCondInst instruction has been removed and
been replaced with ICmpInst and FCmpInst.
llvm-svn: 32751
2006-12-23 06:05:41 +00:00
79a42ac941
Switch over Transforms/Scalar to use the STATISTIC macro. For each statistic
...
converted, we lose a static initializer. This also allows GCC to emit warnings
about unused statistics.
llvm-svn: 32690
2006-12-19 21:40:18 +00:00
df1f19a8ef
Change the interface to SCEVExpander::InsertCastOfTo to take a cast opcode
...
so the decision of which opcode to use is pushed upward to the caller.
Adjust the callers to pass the expected opcode.
llvm-svn: 32535
2006-12-13 08:06:42 +00:00
b341b0861d
Change inferred getCast into specific getCast. Passes all tests.
...
llvm-svn: 32469
2006-12-12 05:05:00 +00:00
f3baad3ee1
Changed llvm_ostream et all to OStream. llvm_cerr, llvm_cout, llvm_null, are
...
now cerr, cout, and NullStream resp.
llvm-svn: 32298
2006-12-07 01:30:32 +00:00
700b873130
Detemplatize the Statistic class. The only type it is instantiated with
...
is 'unsigned'.
llvm-svn: 32279
2006-12-06 17:46:33 +00:00
6c38f0bb07
For PR950:
...
The long awaited CAST patch. This introduces 12 new instructions into LLVM
to replace the cast instruction. Corresponding changes throughout LLVM are
provided. This passes llvm-test, llvm/test, and SPEC CPUINT2000 with the
exception of 175.vpr which fails only on a slight floating point output
difference.
llvm-svn: 31931
2006-11-27 01:05:10 +00:00
5dbf43c983
Removed #include <iostream> and replaced with llvm_* streams.
...
llvm-svn: 31923
2006-11-26 09:46:52 +00:00
21eba2da26
If an indvar with a variable stride is used by the exit condition, go ahead
...
and handle it like constant stride vars. This fixes some bad codegen in
variable stride cases. For example, it compiles this:
void foo(int k, int i) {
for (k=i+i; k <= 8192; k+=i)
flags2[k] = 0;
}
to:
LBB1_1: #bb.preheader
movl %eax, %ecx
addl %ecx, %ecx
movl L_flags2$non_lazy_ptr, %edx
LBB1_2: #bb
movb $0, (%edx,%ecx)
addl %eax, %ecx
cmpl $8192, %ecx
jle LBB1_2 #bb
LBB1_5: #return
ret
or (if the array is local and we are in dynamic-nonpic or static mode):
LBB3_2: #bb
movb $0, _flags2(%ecx)
addl %eax, %ecx
cmpl $8192, %ecx
jle LBB3_2 #bb
and:
lis r2, ha16(L_flags2$non_lazy_ptr)
lwz r2, lo16(L_flags2$non_lazy_ptr)(r2)
slwi r3, r4, 1
LBB1_2: ;bb
li r5, 0
add r6, r4, r3
stbx r5, r2, r3
cmpwi cr0, r6, 8192
bgt cr0, LBB1_5 ;return
instead of:
leal (%eax,%eax,2), %ecx
movl %eax, %edx
addl %edx, %edx
addl L_flags2$non_lazy_ptr, %edx
xorl %esi, %esi
LBB1_2: #bb
movb $0, (%edx,%esi)
movl %eax, %edi
addl %esi, %edi
addl %ecx, %esi
cmpl $8192, %esi
jg LBB1_5 #return
and:
lis r2, ha16(L_flags2$non_lazy_ptr)
lwz r2, lo16(L_flags2$non_lazy_ptr)(r2)
mulli r3, r4, 3
slwi r5, r4, 1
li r6, 0
add r2, r2, r5
LBB1_2: ;bb
li r5, 0
add r7, r3, r6
stbx r5, r2, r6
add r6, r4, r6
cmpwi cr0, r7, 8192
ble cr0, LBB1_2 ;bb
This speeds up Benchmarks/Shootout/sieve from 8.533s to 6.464s and
implements LoopStrengthReduce/var_stride_used_by_compare.ll
llvm-svn: 31809
2006-11-17 06:17:33 +00:00
de46e48420
For PR786:
...
Turn on -Wunused and -Wno-unused-parameter. Clean up most of the resulting
fall out by removing unused variables. Remaining warnings have to do with
unused functions (I didn't want to delete code without review) and unused
variables in generated code. Maintainers should clean up the remaining
issues when they see them. All changes pass DejaGnu tests and Olden.
llvm-svn: 31380
2006-11-02 20:25:50 +00:00
a6eb7e0803
break edges more intelligently
...
llvm-svn: 31257
2006-10-28 06:45:33 +00:00
5191c65485
prepare for a change I'm about to make
...
llvm-svn: 31248
2006-10-28 00:59:20 +00:00
e0fc4dfc22
For PR950:
...
This patch implements the first increment for the Signless Types feature.
All changes pertain to removing the ConstantSInt and ConstantUInt classes
in favor of just using ConstantInt.
llvm-svn: 31063
2006-10-20 07:07:24 +00:00
c2d3d3112e
eliminate RegisterOpt. It does the same thing as RegisterPass.
...
llvm-svn: 29925
2006-08-27 22:42:52 +00:00
3d27be1333
s|llvm/Support/Visibility.h|llvm/Support/Compiler.h|
...
llvm-svn: 29911
2006-08-27 12:54:02 +00:00
3ff620178b
Changes:
...
1. Update an obsolete comment.
2. Make the sorting by base an explicit (though still N^2) step, so
that the code is more clear on what it is doing.
3. Partition uses so that uses inside the loop are handled before uses
outside the loop.
Note that none of these changes currently changes the code inserted by LSR,
but they are a stepping stone to getting there.
This code is the result of some crazy pair programming with Nate. :)
llvm-svn: 29493
2006-08-03 06:34:50 +00:00
e9c68f52e1
Only reuse a previous IV if it would not require a type conversion.
...
llvm-svn: 29186
2006-07-18 19:07:58 +00:00
996795b0dd
Use hidden visibility to make symbols in an anonymous namespace get
...
dropped. This shrinks libllvmgcc.dylib another 67K
llvm-svn: 28975
2006-06-28 23:17:24 +00:00
398f70292c
RewriteExpr, either the new PHI node of induction variable or the
...
post-increment value, should be first cast to the appropriated type (to the
type of the common expr). Otherwise, the rewrite of a use based on (common +
iv) may end up with an incorrect type.
llvm-svn: 28735
2006-06-09 00:12:42 +00:00
13a1a7a4a6
Get rid of a signed/unsigned compare warning.
...
llvm-svn: 27625
2006-04-12 19:28:15 +00:00
f365f5f0c1
Fix spello
...
llvm-svn: 27052
2006-03-24 07:14:34 +00:00
7d80b4f366
silence a bogus gcc warning
...
llvm-svn: 26953
2006-03-22 17:27:24 +00:00
c28282bd87
- Fixed a bogus if condition.
...
- Added more debugging info.
- Allow reuse of IV of negative stride. e.g. -4 stride == 2 * iv of -2 stride.
llvm-svn: 26841
2006-03-18 08:03:12 +00:00
f09f0ebd48
Sort StrideOrder so we can process the smallest strides first. This allows
...
for more IV reuses.
llvm-svn: 26837
2006-03-18 00:44:49 +00:00
4520698820
Allow users of iv / stride to be rewritten with expression that is a multiply
...
of a smaller stride even if they have a common loop invariant expression part.
llvm-svn: 26828
2006-03-17 19:52:23 +00:00
3df447d354
For each loop, keep track of all the IV expressions inserted indexed by
...
stride. For a set of uses of the IV of a stride which is a multiple
of another stride, do not insert a new IV expression. Rather, reuse the
previous IV and rewrite the uses as uses of IV expression multiplied by
the factor.
e.g.
x = 0 ...; x ++
y = 0 ...; y += 4
then use of y can be rewritten as use of 4*x for x86.
llvm-svn: 26803
2006-03-16 21:53:05 +00:00
c567c4efbb
Added target lowering hooks which LSR consults to make more intelligent
...
transformation decisions.
llvm-svn: 26738
2006-03-13 23:14:23 +00:00
d30c4991a1
Use SCEVExpander::InsertCastOfTo instead of our own code. This reduces
...
#LLVM LOC, and auto-cse's cast instructions.
llvm-svn: 25974
2006-02-04 09:52:43 +00:00
2959f0003e
Fix two significant bugs in LSR:
...
1. When rewriting code in outer loops, sometimes we would insert code into
inner loops that is invariant in that loop.
2. Notice that 4*(2+x) is 8+4*x and use that to simplify expressions.
This is a performance neutral change.
llvm-svn: 25964
2006-02-04 07:36:50 +00:00
c597b8a55e
Make iostream #inclusion explicit
...
llvm-svn: 25514
2006-01-22 23:32:06 +00:00
cb36710ff9
Switch these to using ETForest instead of DominatorSet to compute itself.
...
Patch written by Daniel Berlin!
llvm-svn: 25202
2006-01-11 05:10:20 +00:00
077200737c
getRawValue zero extens for unsigned values, use getsextvalue so that we
...
know that small negative values fit into the immediate field of addressing
modes.
llvm-svn: 24608
2005-12-05 18:23:57 +00:00
5df0e36e98
My previous patch was too conservative. Reject FP and void types, but do
...
allow pointer types.
llvm-svn: 23859
2005-10-21 05:45:41 +00:00
0c0b38bb4c
Do NOT touch FP ops with LSR. This fixes a testcase Nate sent me from an
...
inner loop like this:
LBB_RateConvertMono8AltiVec_2: ; no_exit
lis r2, ha16(.CPI_RateConvertMono8AltiVec_0)
lfs f3, lo16(.CPI_RateConvertMono8AltiVec_0)(r2)
fmr f3, f3
fadd f0, f2, f0
fadd f3, f0, f3
fcmpu cr0, f3, f1
bge cr0, LBB_RateConvertMono8AltiVec_2 ; no_exit
to an inner loop like this:
LBB_RateConvertMono8AltiVec_1: ; no_exit
fsub f2, f2, f1
fcmpu cr0, f2, f1
fmr f0, f2
bge cr0, LBB_RateConvertMono8AltiVec_1 ; no_exit
Doh! good catch!
llvm-svn: 23838
2005-10-20 04:47:10 +00:00
192cd18f53
Fix (hopefully the last) issue where LSR is nondeterminstic. When pulling
...
out CSE's of base expressions it could build a result whose order was
nondet.
llvm-svn: 23698
2005-10-11 18:41:04 +00:00
5c9d63da31
Fix another problem where LSR was being nondeterminstic. Also remove elements
...
from the end of a vector instead of the beginning
llvm-svn: 23697
2005-10-11 18:30:57 +00:00
b7a3894e7c
Fix another lsr-is-nondeterministic case
...
llvm-svn: 23695
2005-10-11 18:17:57 +00:00
eb4be8b942
Hrm, you didn't see this.
...
llvm-svn: 23673
2005-10-09 06:24:02 +00:00
4ea0a3eaac
Fix a source of non-determinism in the backend: the order of processing
...
IV strides dependend on the pointer order of the strides in memory.
Non-determinism is bad.
llvm-svn: 23672
2005-10-09 06:20:55 +00:00
f07a587c79
Make IVUseShouldUsePostIncValue more aggressive when the use is a PHI. In
...
particular, it should realize that phi's use their values in the pred block
not the phi block itself. This change turns our em3d loop from this:
_test:
cmpwi cr0, r4, 0
bgt cr0, LBB_test_2 ; entry.no_exit_crit_edge
LBB_test_1: ; entry.loopexit_crit_edge
li r2, 0
b LBB_test_6 ; loopexit
LBB_test_2: ; entry.no_exit_crit_edge
li r6, 0
LBB_test_3: ; no_exit
or r2, r6, r6
lwz r6, 0(r3)
cmpw cr0, r6, r5
beq cr0, LBB_test_6 ; loopexit
LBB_test_4: ; endif
addi r3, r3, 4
addi r6, r2, 1
cmpw cr0, r6, r4
blt cr0, LBB_test_3 ; no_exit
LBB_test_5: ; endif.loopexit.loopexit_crit_edge
addi r3, r2, 1
blr
LBB_test_6: ; loopexit
or r3, r2, r2
blr
into:
_test:
cmpwi cr0, r4, 0
bgt cr0, LBB_test_2 ; entry.no_exit_crit_edge
LBB_test_1: ; entry.loopexit_crit_edge
li r2, 0
b LBB_test_5 ; loopexit
LBB_test_2: ; entry.no_exit_crit_edge
li r6, 0
LBB_test_3: ; no_exit
lwz r2, 0(r3)
cmpw cr0, r2, r5
or r2, r6, r6
beq cr0, LBB_test_5 ; loopexit
LBB_test_4: ; endif
addi r3, r3, 4
addi r6, r6, 1
cmpw cr0, r6, r4
or r2, r6, r6
blt cr0, LBB_test_3 ; no_exit
LBB_test_5: ; loopexit
or r3, r2, r2
blr
Unfortunately, this is actually worse code, because the register coallescer
is getting confused somehow. If it were doing its job right, it could turn the
code into this:
_test:
cmpwi cr0, r4, 0
bgt cr0, LBB_test_2 ; entry.no_exit_crit_edge
LBB_test_1: ; entry.loopexit_crit_edge
li r6, 0
b LBB_test_5 ; loopexit
LBB_test_2: ; entry.no_exit_crit_edge
li r6, 0
LBB_test_3: ; no_exit
lwz r2, 0(r3)
cmpw cr0, r2, r5
beq cr0, LBB_test_5 ; loopexit
LBB_test_4: ; endif
addi r3, r3, 4
addi r6, r6, 1
cmpw cr0, r6, r4
blt cr0, LBB_test_3 ; no_exit
LBB_test_5: ; loopexit
or r3, r6, r6
blr
... which I'll work on next. :)
llvm-svn: 23604
2005-10-03 02:50:05 +00:00
e4ed42a426
Refactor some code into a function
...
llvm-svn: 23603
2005-10-03 01:04:44 +00:00
360928dbed
This break is bogus and I have no idea why it was there. Basically it prevents
...
memoizing code when IV's are used by phinodes outside of loops. In a simple
example, we were getting this code before (note that r6 and r7 are isomorphic
IV's):
li r6, 0
or r7, r6, r6
LBB_test_3: ; no_exit
lwz r2, 0(r3)
cmpw cr0, r2, r5
or r2, r7, r7
beq cr0, LBB_test_5 ; loopexit
LBB_test_4: ; endif
addi r2, r7, 1
addi r7, r7, 1
addi r3, r3, 4
addi r6, r6, 1
cmpw cr0, r6, r4
blt cr0, LBB_test_3 ; no_exit
Now we get:
li r6, 0
LBB_test_3: ; no_exit
or r2, r6, r6
lwz r6, 0(r3)
cmpw cr0, r6, r5
beq cr0, LBB_test_6 ; loopexit
LBB_test_4: ; endif
addi r3, r3, 4
addi r6, r2, 1
cmpw cr0, r6, r4
blt cr0, LBB_test_3 ; no_exit
this was noticed in em3d.
llvm-svn: 23602
2005-10-03 00:37:33 +00:00
8fcce170cf
when checking if we should move a split edge block outside of a loop,
...
check the presplit pred, not the post-split pred. This was causing us
to make the wrong decision in some cases, leaving the critical edge block
in the loop.
llvm-svn: 23601
2005-10-03 00:31:52 +00:00
92233d2175
Make the pass name simpler
...
llvm-svn: 23476
2005-09-27 21:10:32 +00:00
fd018c8dfe
Fix an issue where LSR would miss rewriting a use of an IV expression by a PHI node that is not the original PHI.
...
This fixes up a dot-product loop in galgel, speeding it up from 18.47s to
16.13s.
llvm-svn: 23327
2005-09-13 02:09:55 +00:00
8048b85e8f
Fix a regression from last night, which caused this pass to create invalid
...
code for IV uses outside of loops that are not dominated by the latch block.
We should only convert these uses to use the post-inc value if they ARE
dominated by the latch block.
Also use a new LoopInfo method to simplify some code.
This fixes Transforms/LoopStrengthReduce/2005-09-12-UsesOutOutsideOfLoop.ll
llvm-svn: 23318
2005-09-12 17:11:27 +00:00
a67648396a
_test:
...
li r2, 0
LBB_test_1: ; no_exit.2
li r5, 0
stw r5, 0(r3)
addi r2, r2, 1
addi r3, r3, 4
cmpwi cr0, r2, 701
blt cr0, LBB_test_1 ; no_exit.2
LBB_test_2: ; loopexit.2.loopexit
addi r2, r2, 1
stw r2, 0(r4)
blr
[zion ~/llvm]$ cat > ~/xx
Uses of IV's outside of the loop should use hte post-incremented version
of the IV, not the preincremented version. This helps many loops (e.g. in sixtrack)
which used to generate code like this (this is the code from the
dont-hoist-simple-loop-constants.ll testcase):
_test:
li r2, 0 **** IV starts at 0
LBB_test_1: ; no_exit.2
or r5, r2, r2 **** Copy for loop exit
li r2, 0
stw r2, 0(r3)
addi r3, r3, 4
addi r2, r5, 1
addi r6, r5, 2 **** IV+2
cmpwi cr0, r6, 701
blt cr0, LBB_test_1 ; no_exit.2
LBB_test_2: ; loopexit.2.loopexit
addi r2, r5, 2 **** IV+2
stw r2, 0(r4)
blr
And now generated code like this:
_test:
li r2, 1 *** IV starts at 1
LBB_test_1: ; no_exit.2
li r5, 0
stw r5, 0(r3)
addi r2, r2, 1
addi r3, r3, 4
cmpwi cr0, r2, 701 *** IV.postinc + 0
blt cr0, LBB_test_1
LBB_test_2: ; loopexit.2.loopexit
stw r2, 0(r4) *** IV.postinc + 0
blr
llvm-svn: 23313
2005-09-12 06:04:47 +00:00
530fe6ab30
implement Transforms/LoopStrengthReduce/dont-hoist-simple-loop-constants.ll.
...
We used to emit this code for it:
_test:
li r2, 1 ;; Value tying up a register for the whole loop
li r5, 0
LBB_test_1: ; no_exit.2
or r6, r5, r5
li r5, 0
stw r5, 0(r3)
addi r5, r6, 1
addi r3, r3, 4
add r7, r2, r5 ;; should be addi r7, r5, 1
cmpwi cr0, r7, 701
blt cr0, LBB_test_1 ; no_exit.2
LBB_test_2: ; loopexit.2.loopexit
addi r2, r6, 2
stw r2, 0(r4)
blr
now we emit this:
_test:
li r2, 0
LBB_test_1: ; no_exit.2
or r5, r2, r2
li r2, 0
stw r2, 0(r3)
addi r3, r3, 4
addi r2, r5, 1
addi r6, r5, 2 ;; whoa, fold those adds!
cmpwi cr0, r6, 701
blt cr0, LBB_test_1 ; no_exit.2
LBB_test_2: ; loopexit.2.loopexit
addi r2, r5, 2
stw r2, 0(r4)
blr
more improvement coming.
llvm-svn: 23306
2005-09-10 01:18:45 +00:00
ea7dfd53d6
Fix Transforms/LoopStrengthReduce/2005-08-17-OutOfLoopVariant.ll, a crash
...
on 177.mesa
llvm-svn: 22843
2005-08-17 21:22:41 +00:00
2bf7cb5213
Use a new helper to split critical edges, making the code simpler.
...
Do not claim to not change the CFG. We do change the cfg to split critical
edges. This isn't causing us a problem now, but could likely do so in the
future.
llvm-svn: 22824
2005-08-17 06:35:16 +00:00
5cf983ee0f
Fix a bad case in gzip where we put lots of things in registers across the
...
loop, because a IV-dependent value was used outside of the loop and didn't
have immediate-folding capability
llvm-svn: 22798
2005-08-16 00:38:11 +00:00
47d3ec3525
Ooops, don't forget to clear this. The real inner loop is now:
...
.LBB_foo_3: ; no_exit.1
lfd f2, 0(r9)
lfd f3, 8(r9)
fmul f4, f1, f2
fmadd f4, f0, f3, f4
stfd f4, 8(r9)
fmul f3, f1, f3
fmsub f2, f0, f2, f3
stfd f2, 0(r9)
addi r9, r9, 16
addi r8, r8, 1
cmpw cr0, r8, r4
ble .LBB_foo_3 ; no_exit.1
llvm-svn: 22782
2005-08-13 07:42:01 +00:00
5949d49032
Recursively scan scev expressions for common subexpressions. This allows us
...
to handle nested loops much better, for example, by being able to tell that
these two expressions:
{( 8 + ( 16 * ( 1 + %Tmp11 + %Tmp12)) + %c_),+,( 16 * %Tmp 12)}<loopentry.1>
{(( 16 * ( 1 + %Tmp11 + %Tmp12)) + %c_),+,( 16 * %Tmp12)}<loopentry.1>
Have the following common part that can be shared:
{(( 16 * ( 1 + %Tmp11 + %Tmp12)) + %c_),+,( 16 * %Tmp12)}<loopentry.1>
This allows us to codegen an important inner loop in 168.wupwise as:
.LBB_foo_4: ; no_exit.1
lfd f2, 16(r9)
fmul f3, f0, f2
fmul f2, f1, f2
fadd f4, f3, f2
stfd f4, 8(r9)
fsub f2, f3, f2
stfd f2, 16(r9)
addi r8, r8, 1
addi r9, r9, 16
cmpw cr0, r8, r4
ble .LBB_foo_4 ; no_exit.1
instead of:
.LBB_foo_3: ; no_exit.1
lfdx f2, r6, r9
add r10, r6, r9
lfd f3, 8(r10)
fmul f4, f1, f2
fmadd f4, f0, f3, f4
stfd f4, 8(r10)
fmul f3, f1, f3
fmsub f2, f0, f2, f3
stfdx f2, r6, r9
addi r9, r9, 16
addi r8, r8, 1
cmpw cr0, r8, r4
ble .LBB_foo_3 ; no_exit.1
llvm-svn: 22781
2005-08-13 07:27:18 +00:00
8447b49526
When splitting critical edges, make sure not to leave the new block in the
...
middle of the loop. This turns a critical loop in gzip into this:
.LBB_test_1: ; loopentry
or r27, r28, r28
add r28, r3, r27
lhz r28, 3(r28)
add r26, r4, r27
lhz r26, 3(r26)
cmpw cr0, r28, r26
bne .LBB_test_8 ; loopentry.loopexit_crit_edge
.LBB_test_2: ; shortcirc_next.0
add r28, r3, r27
lhz r28, 5(r28)
add r26, r4, r27
lhz r26, 5(r26)
cmpw cr0, r28, r26
bne .LBB_test_7 ; shortcirc_next.0.loopexit_crit_edge
.LBB_test_3: ; shortcirc_next.1
add r28, r3, r27
lhz r28, 7(r28)
add r26, r4, r27
lhz r26, 7(r26)
cmpw cr0, r28, r26
bne .LBB_test_6 ; shortcirc_next.1.loopexit_crit_edge
.LBB_test_4: ; shortcirc_next.2
add r28, r3, r27
lhz r26, 9(r28)
add r28, r4, r27
lhz r25, 9(r28)
addi r28, r27, 8
cmpw cr7, r26, r25
mfcr r26, 1
rlwinm r26, r26, 31, 31, 31
add r25, r8, r27
cmpw cr7, r25, r7
mfcr r25, 1
rlwinm r25, r25, 29, 31, 31
and. r26, r26, r25
bne .LBB_test_1 ; loopentry
instead of this:
.LBB_test_1: ; loopentry
or r27, r28, r28
add r28, r3, r27
lhz r28, 3(r28)
add r26, r4, r27
lhz r26, 3(r26)
cmpw cr0, r28, r26
beq .LBB_test_3 ; shortcirc_next.0
.LBB_test_2: ; loopentry.loopexit_crit_edge
add r2, r30, r27
add r8, r29, r27
b .LBB_test_9 ; loopexit
.LBB_test_3: ; shortcirc_next.0
add r28, r3, r27
lhz r28, 5(r28)
add r26, r4, r27
lhz r26, 5(r26)
cmpw cr0, r28, r26
beq .LBB_test_5 ; shortcirc_next.1
.LBB_test_4: ; shortcirc_next.0.loopexit_crit_edge
add r2, r11, r27
add r8, r12, r27
b .LBB_test_9 ; loopexit
.LBB_test_5: ; shortcirc_next.1
add r28, r3, r27
lhz r28, 7(r28)
add r26, r4, r27
lhz r26, 7(r26)
cmpw cr0, r28, r26
beq .LBB_test_7 ; shortcirc_next.2
.LBB_test_6: ; shortcirc_next.1.loopexit_crit_edge
add r2, r9, r27
add r8, r10, r27
b .LBB_test_9 ; loopexit
.LBB_test_7: ; shortcirc_next.2
add r28, r3, r27
lhz r26, 9(r28)
add r28, r4, r27
lhz r25, 9(r28)
addi r28, r27, 8
cmpw cr7, r26, r25
mfcr r26, 1
rlwinm r26, r26, 31, 31, 31
add r25, r8, r27
cmpw cr7, r25, r7
mfcr r25, 1
rlwinm r25, r25, 29, 31, 31
and. r26, r26, r25
bne .LBB_test_1 ; loopentry
Next up, improve the code for the loop.
llvm-svn: 22769
2005-08-12 22:22:17 +00:00
4fec86d348
Fix a FIXME: if we are inserting code for a PHI argument, split the critical
...
edge so that the code is not always executed for both operands. This
prevents LSR from inserting code into loops whose exit blocks contain
PHI uses of IV expressions (which are outside of loops). On gzip, for
example, we turn this ugly code:
.LBB_test_1: ; loopentry
add r27, r3, r28
lhz r27, 3(r27)
add r26, r4, r28
lhz r26, 3(r26)
add r25, r30, r28 ;; Only live if exiting the loop
add r24, r29, r28 ;; Only live if exiting the loop
cmpw cr0, r27, r26
bne .LBB_test_5 ; loopexit
into this:
.LBB_test_1: ; loopentry
or r27, r28, r28
add r28, r3, r27
lhz r28, 3(r28)
add r26, r4, r27
lhz r26, 3(r26)
cmpw cr0, r28, r26
beq .LBB_test_3 ; shortcirc_next.0
.LBB_test_2: ; loopentry.loopexit_crit_edge
add r2, r30, r27
add r8, r29, r27
b .LBB_test_9 ; loopexit
.LBB_test_2: ; shortcirc_next.0
...
blt .LBB_test_1
into this:
.LBB_test_1: ; loopentry
or r27, r28, r28
add r28, r3, r27
lhz r28, 3(r28)
add r26, r4, r27
lhz r26, 3(r26)
cmpw cr0, r28, r26
beq .LBB_test_3 ; shortcirc_next.0
.LBB_test_2: ; loopentry.loopexit_crit_edge
add r2, r30, r27
add r8, r29, r27
b .LBB_t_3: ; shortcirc_next.0
.LBB_test_3: ; shortcirc_next.0
...
blt .LBB_test_1
Next step: get the block out of the loop so that the loop is all
fall-throughs again.
llvm-svn: 22766
2005-08-12 22:06:11 +00:00
edff91a49a
Teach LSR to strength reduce IVs that have a loop-invariant but non-constant stride.
...
For code like this:
void foo(float *a, float *b, int n, int stride_a, int stride_b) {
int i;
for (i=0; i<n; i++)
a[i*stride_a] = b[i*stride_b];
}
we now emit:
.LBB_foo2_2: ; no_exit
lfs f0, 0(r4)
stfs f0, 0(r3)
addi r7, r7, 1
add r4, r2, r4
add r3, r6, r3
cmpw cr0, r7, r5
blt .LBB_foo2_2 ; no_exit
instead of:
.LBB_foo_2: ; no_exit
mullw r8, r2, r7 ;; multiply!
slwi r8, r8, 2
lfsx f0, r4, r8
mullw r8, r2, r6 ;; multiply!
slwi r8, r8, 2
stfsx f0, r3, r8
addi r2, r2, 1
cmpw cr0, r2, r5
blt .LBB_foo_2 ; no_exit
loops with variable strides occur pretty often. For example, in SPECFP2K
there are 317 variable strides in 177.mesa, 3 in 179.art, 14 in 188.ammp,
56 in 168.wupwise, 36 in 172.mgrid.
Now we can allow indvars to turn functions written like this:
void foo2(float *a, float *b, int n, int stride_a, int stride_b) {
int i, ai = 0, bi = 0;
for (i=0; i<n; i++)
{
a[ai] = b[bi];
ai += stride_a;
bi += stride_b;
}
}
into code like the above for better analysis. With this patch, they generate
identical code.
llvm-svn: 22740
2005-08-10 00:45:21 +00:00
dde7dc525e
Fix Regression/Transforms/LoopStrengthReduce/phi_node_update_multiple_preds.ll
...
by being more careful about updating PHI nodes
llvm-svn: 22739
2005-08-10 00:35:32 +00:00
c6c4d99a21
Fix some 80 column violations.
...
Once we compute the evolution for a GEP, tell SE about it. This allows users
of the GEP to know it, if the users are not direct. This allows us to compile
this testcase:
void fbSolidFillmmx(int w, unsigned char *d) {
while (w >= 64) {
*(unsigned long long *) (d + 0) = 0;
*(unsigned long long *) (d + 8) = 0;
*(unsigned long long *) (d + 16) = 0;
*(unsigned long long *) (d + 24) = 0;
*(unsigned long long *) (d + 32) = 0;
*(unsigned long long *) (d + 40) = 0;
*(unsigned long long *) (d + 48) = 0;
*(unsigned long long *) (d + 56) = 0;
w -= 64;
d += 64;
}
}
into:
.LBB_fbSolidFillmmx_2: ; no_exit
li r2, 0
stw r2, 0(r4)
stw r2, 4(r4)
stw r2, 8(r4)
stw r2, 12(r4)
stw r2, 16(r4)
stw r2, 20(r4)
stw r2, 24(r4)
stw r2, 28(r4)
stw r2, 32(r4)
stw r2, 36(r4)
stw r2, 40(r4)
stw r2, 44(r4)
stw r2, 48(r4)
stw r2, 52(r4)
stw r2, 56(r4)
stw r2, 60(r4)
addi r4, r4, 64
addi r3, r3, -64
cmpwi cr0, r3, 63
bgt .LBB_fbSolidFillmmx_2 ; no_exit
instead of:
.LBB_fbSolidFillmmx_2: ; no_exit
li r11, 0
stw r11, 0(r4)
stw r11, 4(r4)
stwx r11, r10, r4
add r12, r10, r4
stw r11, 4(r12)
stwx r11, r9, r4
add r12, r9, r4
stw r11, 4(r12)
stwx r11, r8, r4
add r12, r8, r4
stw r11, 4(r12)
stwx r11, r7, r4
add r12, r7, r4
stw r11, 4(r12)
stwx r11, r6, r4
add r12, r6, r4
stw r11, 4(r12)
stwx r11, r5, r4
add r12, r5, r4
stw r11, 4(r12)
stwx r11, r2, r4
add r12, r2, r4
stw r11, 4(r12)
addi r4, r4, 64
addi r3, r3, -64
cmpwi cr0, r3, 63
bgt .LBB_fbSolidFillmmx_2 ; no_exit
llvm-svn: 22737
2005-08-09 23:39:36 +00:00
02742710f3
SCEVAddExpr::get() of an empty list is invalid.
...
llvm-svn: 22724
2005-08-09 01:13:47 +00:00
a091ff1764
Implement: LoopStrengthReduce/share_ivs.ll
...
Two changes:
* Only insert one PHI node for each stride. Other values are live in
values. This cannot introduce higher register pressure than the
previous approach, and can take advantage of reg+reg addressing modes.
* Factor common base values out of uses before moving values from the
base to the immediate fields. This improves codegen by starting the
stride-specific PHI node out at a common place for each IV use.
As an example, we used to generate this for a loop in swim:
.LBB_main_no_exit_2E_6_2E_i_no_exit_2E_7_2E_i_2: ; no_exit.7.i
lfd f0, 0(r8)
stfd f0, 0(r3)
lfd f0, 0(r6)
stfd f0, 0(r7)
lfd f0, 0(r2)
stfd f0, 0(r5)
addi r9, r9, 1
addi r2, r2, 8
addi r5, r5, 8
addi r6, r6, 8
addi r7, r7, 8
addi r8, r8, 8
addi r3, r3, 8
cmpw cr0, r9, r4
bgt .LBB_main_no_exit_2E_6_2E_i_no_exit_2E_7_2E_i_1
now we emit:
.LBB_main_no_exit_2E_6_2E_i_no_exit_2E_7_2E_i_2: ; no_exit.7.i
lfdx f0, r8, r2
stfdx f0, r9, r2
lfdx f0, r5, r2
stfdx f0, r7, r2
lfdx f0, r3, r2
stfdx f0, r6, r2
addi r10, r10, 1
addi r2, r2, 8
cmpw cr0, r10, r4
bgt .LBB_main_no_exit_2E_6_2E_i_no_exit_2E_7_2E_i_1
As another more dramatic example, we used to emit this:
.LBB_main_L_90_no_exit_2E_0_2E_i16_no_exit_2E_1_2E_i19_2: ; no_exit.1.i19
lfd f0, 8(r21)
lfd f4, 8(r3)
lfd f5, 8(r27)
lfd f6, 8(r22)
lfd f7, 8(r5)
lfd f8, 8(r6)
lfd f9, 8(r30)
lfd f10, 8(r11)
lfd f11, 8(r12)
fsub f10, f10, f11
fadd f5, f4, f5
fmul f5, f5, f1
fadd f6, f6, f7
fadd f6, f6, f8
fadd f6, f6, f9
fmadd f0, f5, f6, f0
fnmsub f0, f10, f2, f0
stfd f0, 8(r4)
lfd f0, 8(r25)
lfd f5, 8(r26)
lfd f6, 8(r23)
lfd f9, 8(r28)
lfd f10, 8(r10)
lfd f12, 8(r9)
lfd f13, 8(r29)
fsub f11, f13, f11
fadd f4, f4, f5
fmul f4, f4, f1
fadd f5, f6, f9
fadd f5, f5, f10
fadd f5, f5, f12
fnmsub f0, f4, f5, f0
fnmsub f0, f11, f3, f0
stfd f0, 8(r24)
lfd f0, 8(r8)
fsub f4, f7, f8
fsub f5, f12, f10
fnmsub f0, f5, f2, f0
fnmsub f0, f4, f3, f0
stfd f0, 8(r2)
addi r20, r20, 1
addi r2, r2, 8
addi r8, r8, 8
addi r10, r10, 8
addi r12, r12, 8
addi r6, r6, 8
addi r29, r29, 8
addi r28, r28, 8
addi r26, r26, 8
addi r25, r25, 8
addi r24, r24, 8
addi r5, r5, 8
addi r23, r23, 8
addi r22, r22, 8
addi r3, r3, 8
addi r9, r9, 8
addi r11, r11, 8
addi r30, r30, 8
addi r27, r27, 8
addi r21, r21, 8
addi r4, r4, 8
cmpw cr0, r20, r7
bgt .LBB_main_L_90_no_exit_2E_0_2E_i16_no_exit_2E_1_2E_i19_1
we now emit:
.LBB_main_L_90_no_exit_2E_0_2E_i16_no_exit_2E_1_2E_i19_2: ; no_exit.1.i19
lfdx f0, r21, r20
lfdx f4, r3, r20
lfdx f5, r27, r20
lfdx f6, r22, r20
lfdx f7, r5, r20
lfdx f8, r6, r20
lfdx f9, r30, r20
lfdx f10, r11, r20
lfdx f11, r12, r20
fsub f10, f10, f11
fadd f5, f4, f5
fmul f5, f5, f1
fadd f6, f6, f7
fadd f6, f6, f8
fadd f6, f6, f9
fmadd f0, f5, f6, f0
fnmsub f0, f10, f2, f0
stfdx f0, r4, r20
lfdx f0, r25, r20
lfdx f5, r26, r20
lfdx f6, r23, r20
lfdx f9, r28, r20
lfdx f10, r10, r20
lfdx f12, r9, r20
lfdx f13, r29, r20
fsub f11, f13, f11
fadd f4, f4, f5
fmul f4, f4, f1
fadd f5, f6, f9
fadd f5, f5, f10
fadd f5, f5, f12
fnmsub f0, f4, f5, f0
fnmsub f0, f11, f3, f0
stfdx f0, r24, r20
lfdx f0, r8, r20
fsub f4, f7, f8
fsub f5, f12, f10
fnmsub f0, f5, f2, f0
fnmsub f0, f4, f3, f0
stfdx f0, r2, r20
addi r19, r19, 1
addi r20, r20, 8
cmpw cr0, r19, r7
bgt .LBB_main_L_90_no_exit_2E_0_2E_i16_no_exit_2E_1_2E_i19_1
llvm-svn: 22722
2005-08-09 00:18:09 +00:00
37c24cc98c
Suck the base value out of the UsersToProcess vector into the BasedUser
...
class to simplify the code. Fuse two loops.
llvm-svn: 22721
2005-08-08 22:56:21 +00:00
37ed895bf1
Split MoveLoopVariantsToImediateField out from MoveImmediateValues. The
...
first is a correctness thing, and the later is an optzn thing. This also
is needed to support a future change.
llvm-svn: 22720
2005-08-08 22:32:34 +00:00
14203e85b2
Not all constants are legal immediates in load/store instructions.
...
llvm-svn: 22704
2005-08-08 06:25:50 +00:00
c70bbc0c41
Implement LoopStrengthReduce/share_code_in_preheader.ll by having one
...
rewriter for all code inserted into the preheader, which is never flushed.
llvm-svn: 22702
2005-08-08 05:47:49 +00:00
9bfa6f8784
Implement a simple optimization for the termination condition of the loop.
...
The termination condition actually wants to use the post-incremented value
of the loop, not a new indvar with an unusual base.
On PPC, for example, this allows us to compile
LoopStrengthReduce/exit_compare_live_range.ll to:
_foo:
li r2, 0
.LBB_foo_1: ; no_exit
li r5, 0
stw r5, 0(r3)
addi r2, r2, 1
cmpw cr0, r2, r4
bne .LBB_foo_1 ; no_exit
blr
instead of:
_foo:
li r2, 1 ;; IV starts at 1, not 0
.LBB_foo_1: ; no_exit
li r5, 0
stw r5, 0(r3)
addi r5, r2, 1
cmpw cr0, r2, r4
or r2, r5, r5 ;; Reg-reg copy, extra live range
bne .LBB_foo_1 ; no_exit
blr
This implements LoopStrengthReduce/exit_compare_live_range.ll
llvm-svn: 22699
2005-08-08 05:28:22 +00:00
11e7a5eda7
Make sure to clean CastedPointers after casts are potentially deleted.
...
This fixes LSR crashes on 301.apsi, 191.fma3d, and 189.lucas
llvm-svn: 22673
2005-08-05 01:30:11 +00:00
45f8b6e7aa
Modify how immediates are removed from base expressions to deal with the fact
...
that the symbolic evaluator is not always able to use subtraction to remove
expressions. This makes the code faster, and fixes the last crash on 178.galgel.
Finally, add a statistic to see how many phi nodes are inserted.
On 178.galgel, we get the follow stats:
2562 loop-reduce - Number of PHIs inserted
3927 loop-reduce - Number of GEPs strength reduced
llvm-svn: 22662
2005-08-04 22:34:05 +00:00
a6d7c355bc
* Refactor some code into a new BasedUser::RewriteInstructionToUseNewBase
...
method.
* Fix a crash on 178.galgel, where we would insert expressions before PHI
nodes instead of into the PHI node predecessor blocks.
llvm-svn: 22657
2005-08-04 20:03:32 +00:00
0f7c0fa2a7
Fix a case that caused this to crash on 178.galgel
...
llvm-svn: 22653
2005-08-04 19:26:19 +00:00
acc42c4df1
Teach LSR about loop-variant expressions, such as loops like this:
...
for (i = 0; i < N; ++i)
A[i][foo()] = 0;
here we still want to strength reduce the A[i] part, even though foo() is
l-v.
This also simplifies some of the 'CanReduce' logic.
This implements Transforms/LoopStrengthReduce/ops_after_indvar.ll
llvm-svn: 22652
2005-08-04 19:08:16 +00:00
456044b724
Remove some more dead code.
...
llvm-svn: 22650
2005-08-04 18:13:56 +00:00
eaf24725b2
Refactor this code substantially with the following improvements:
...
1. We only analyze instructions once, guaranteed
2. AnalyzeGetElementPtrUsers has been ripped apart and replaced with
something much simpler.
The next step is to handle expressions that are not all indvar+loop-invariant
values (e.g. handling indvar+loopvariant).
llvm-svn: 22649
2005-08-04 17:40:30 +00:00
6f286b760f
refactor some code
...
llvm-svn: 22643
2005-08-04 01:19:13 +00:00
6510749050
invert to if's to make the logic simpler
...
llvm-svn: 22641
2005-08-04 00:40:47 +00:00
a0102fbc4f
When processing outer loops and we find uses of an IV in inner loops, make
...
sure to handle the use, just don't recurse into it.
This permits us to generate this code for a simple nested loop case:
.LBB_foo_0: ; entry
stwu r1, -48(r1)
stw r29, 44(r1)
stw r30, 40(r1)
mflr r11
stw r11, 56(r1)
lis r2, ha16(L_A$non_lazy_ptr)
lwz r30, lo16(L_A$non_lazy_ptr)(r2)
li r29, 1
.LBB_foo_1: ; no_exit.0
bl L_bar$stub
li r2, 1
or r3, r30, r30
.LBB_foo_2: ; no_exit.1
lfd f0, 8(r3)
stfd f0, 0(r3)
addi r4, r2, 1
addi r3, r3, 8
cmpwi cr0, r2, 100
or r2, r4, r4
bne .LBB_foo_2 ; no_exit.1
.LBB_foo_3: ; loopexit.1
addi r30, r30, 800
addi r2, r29, 1
cmpwi cr0, r29, 100
or r29, r2, r2
bne .LBB_foo_1 ; no_exit.0
.LBB_foo_4: ; return
lwz r11, 56(r1)
mtlr r11
lwz r30, 40(r1)
lwz r29, 44(r1)
lwz r1, 0(r1)
blr
instead of this:
_foo:
.LBB_foo_0: ; entry
stwu r1, -48(r1)
stw r28, 44(r1) ;; uses an extra register.
stw r29, 40(r1)
stw r30, 36(r1)
mflr r11
stw r11, 56(r1)
li r30, 1
li r29, 0
or r28, r29, r29
.LBB_foo_1: ; no_exit.0
bl L_bar$stub
mulli r2, r28, 800 ;; unstrength-reduced multiply
lis r3, ha16(L_A$non_lazy_ptr) ;; loop invariant address computation
lwz r3, lo16(L_A$non_lazy_ptr)(r3)
add r2, r2, r3
mulli r4, r29, 800 ;; unstrength-reduced multiply
addi r3, r3, 8
add r3, r4, r3
li r4, 1
.LBB_foo_2: ; no_exit.1
lfd f0, 0(r3)
stfd f0, 0(r2)
addi r5, r4, 1
addi r2, r2, 8 ;; multiple stride 8 IV's
addi r3, r3, 8
cmpwi cr0, r4, 100
or r4, r5, r5
bne .LBB_foo_2 ; no_exit.1
.LBB_foo_3: ; loopexit.1
addi r28, r28, 1 ;;; Many IV's with stride 1
addi r29, r29, 1
addi r2, r30, 1
cmpwi cr0, r30, 100
or r30, r2, r2
bne .LBB_foo_1 ; no_exit.0
.LBB_foo_4: ; return
lwz r11, 56(r1)
mtlr r11
lwz r30, 36(r1)
lwz r29, 40(r1)
lwz r28, 44(r1)
lwz r1, 0(r1)
blr
llvm-svn: 22640
2005-08-04 00:14:11 +00:00
fc62470466
Teach loop-reduce to see into nested loops, to pull out immediate values
...
pushed down by SCEV.
In a nested loop case, this allows us to emit this:
lis r3, ha16(L_A$non_lazy_ptr)
lwz r3, lo16(L_A$non_lazy_ptr)(r3)
add r2, r2, r3
li r3, 1
.LBB_foo_2: ; no_exit.1
lfd f0, 8(r2) ;; Uses offset of 8 instead of 0
stfd f0, 0(r2)
addi r4, r3, 1
addi r2, r2, 8
cmpwi cr0, r3, 100
or r3, r4, r4
bne .LBB_foo_2 ; no_exit.1
instead of this:
lis r3, ha16(L_A$non_lazy_ptr)
lwz r3, lo16(L_A$non_lazy_ptr)(r3)
add r2, r2, r3
addi r3, r3, 8
li r4, 1
.LBB_foo_2: ; no_exit.1
lfd f0, 0(r3)
stfd f0, 0(r2)
addi r5, r4, 1
addi r2, r2, 8
addi r3, r3, 8
cmpwi cr0, r4, 100
or r4, r5, r5
bne .LBB_foo_2 ; no_exit.1
llvm-svn: 22639
2005-08-03 23:44:42 +00:00
bb78c97e24
improve debug output
...
llvm-svn: 22638
2005-08-03 23:30:08 +00:00
db23c74e5e
Move from Stage 0 to Stage 1.
...
Only emit one PHI node for IV uses with identical bases and strides (after
moving foldable immediates to the load/store instruction).
This implements LoopStrengthReduce/dont_insert_redundant_ops.ll, allowing
us to generate this PPC code for test1:
or r30, r3, r3
.LBB_test1_1: ; Loop
li r2, 0
stw r2, 0(r30)
stw r2, 4(r30)
bl L_pred$stub
addi r30, r30, 8
cmplwi cr0, r3, 0
bne .LBB_test1_1 ; Loop
instead of this code:
or r30, r3, r3
or r29, r3, r3
.LBB_test1_1: ; Loop
li r2, 0
stw r2, 0(r29)
stw r2, 4(r30)
bl L_pred$stub
addi r30, r30, 8 ;; Two iv's with step of 8
addi r29, r29, 8
cmplwi cr0, r3, 0
bne .LBB_test1_1 ; Loop
llvm-svn: 22635
2005-08-03 22:51:21 +00:00
430d0022df
Rename IVUse to IVUsersOfOneStride, use a struct instead of a pair to
...
unify some parallel vectors and get field names more descriptive than
"first" and "second". This isn't lisp afterall :)
llvm-svn: 22633
2005-08-03 22:21:05 +00:00
84e9baa925
Fix a nasty dangling pointer issue. The ScalarEvolution pass would keep a
...
map from instruction* to SCEVHandles. When we delete instructions, we have
to tell it about it. We would run into nasty cases where new instructions
were reallocated at old instruction addresses and get the old map values.
Bad bad bad :(
llvm-svn: 22632
2005-08-03 21:36:09 +00:00
351b891cbc
Like the comment says, do not insert cast instructions before phi nodes
...
llvm-svn: 22586
2005-08-02 03:31:14 +00:00
75a44e154e
add a comment, make a check more lenient
...
llvm-svn: 22581
2005-08-02 02:52:02 +00:00
dcce49e006
Simplify for loop, clear a per-loop map after processing each loop
...
llvm-svn: 22580
2005-08-02 02:44:31 +00:00
9ef1294210
Add a comment
...
Make LSR ignore GEP's that have loop variant base values, as we currently
cannot codegen them
llvm-svn: 22576
2005-08-02 01:32:29 +00:00
564900e5e5
Fix an iterator invalidation problem
...
llvm-svn: 22575
2005-08-02 00:41:11 +00:00
546fd5944e
Keep tabs and trailing spaces out.
...
llvm-svn: 22565
2005-07-30 18:33:25 +00:00
c500991055
Fix VC++ build problems.
...
llvm-svn: 22564
2005-07-30 18:22:27 +00:00
17a0e2afea
Ack, typo
...
llvm-svn: 22560
2005-07-30 00:21:31 +00:00
e68bcd1946
Commit a new LoopStrengthReduce pass that can use scalar evolutions and
...
target data to decide which loop induction variables to strength reduce
and how to do so. This work is mostly by Chris Lattner, with tweaks by
me to get it working on some of MultiSource.
llvm-svn: 22558
2005-07-30 00:15:07 +00:00
b1c9317bb4
Remove trailing whitespace
...
llvm-svn: 21427
2005-04-21 23:48:37 +00:00
8c79559443
fix a bug where we thought arguments were constants :(
...
llvm-svn: 20506
2005-03-06 22:52:29 +00:00
2ce303b406
Fix Regression/Transforms/LoopStrengthReduce/dont_insert_redundant_ops.ll,
...
hopefully not breaking too many other things.
llvm-svn: 20505
2005-03-06 22:36:12 +00:00
45403e5052
implement Transforms/LoopStrengthReduce/invariant_value_first_arg.ll
...
llvm-svn: 20501
2005-03-06 22:06:22 +00:00
d3874fad44
minor simplifications of the code.
...
llvm-svn: 20497
2005-03-06 21:58:22 +00:00
4abcea3a69
Reformat comments to fix 80 columns.
...
llvm-svn: 20467
2005-03-05 22:45:40 +00:00
be37fa07fd
Reuse induction variables created for strength-reduced GEPs by other similar GEPs.
...
llvm-svn: 20466
2005-03-05 22:40:34 +00:00
a2c59b7423
Add support for not strength reducing GEPs where the element size is a small
...
power of two. This emphatically includes the zeroeth power of two.
llvm-svn: 20429
2005-03-04 04:04:26 +00:00
8ea6f9e821
Fixed the following LSR bugs:
...
* Loop invariant code does not dominate the loop header, but rather
the end of the loop preheader.
* The base for a reduced GEP isn't a constant unless all of its
operands (preceding the induction variable) are constant.
* Allow induction variable elimination for the simple case after all.
Also made changes recommended by Chris for properly deleting
instructions.
llvm-svn: 20383
2005-03-01 03:46:11 +00:00
dcaa48b5c4
Fix crash in LSR due to attempt to remove original induction variable. However,
...
for reasons explained in the comments, I also deactivated this code as it needs
more thought.
llvm-svn: 20367
2005-02-28 00:08:56 +00:00
fd63d3af0d
PHI nodes were incorrectly placed when more than one GEP is reduced in a loop.
...
llvm-svn: 20360
2005-02-27 21:08:04 +00:00
39751c3b7c
First pass at improved Loop Strength Reduction. Still not yet ready for prime time.
...
llvm-svn: 20358
2005-02-27 19:37:07 +00:00
b18121e6a9
Initial implementation of the strength reduction for GEP instructions in
...
loops. This optimization is not turned on by default yet, but may be run
with the opt tool's -loop-reduce flag. There are many FIXMEs listed in the
code that will make it far more applicable to a wide range of code, but you
have to start somewhere :)
This limited version currently triggers on the following tests in the
MultiSource directory:
pcompress2: 7 times
cfrac: 5 times
anagram: 2 times
ks: 6 times
yacr2: 2 times
llvm-svn: 17134
2004-10-18 21:08:22 +00:00
Dan Gohman