When generating a floating point comparison we currently unconditionally
generate VCMPE. This has the sideeffect of setting the cumulative Invalid
bit in FPSCR if any of the operands are QNaN.
It is expected that use of a relational predicate on a QNaN value should
raise Invalid. Quoting from the C standard:
The relational and equality operators support the usual mathematical
relationships between numeric values. For any ordered pair of numeric
values exactly one of relationships the less, greater, equal and is true.
Relational operators may raise the floating-point exception when argument
values are NaNs.
The standard doesn't explicitly state the expectation for equality operators,
but the implication and obvious expectation is that equality operators
should not raise Invalid on a QNaN input, as those predicates are wholly
defined on unordered inputs (to return not equal).
Therefore, add a new operand to ARMISD::FPCMP and FPCMPZ indicating if
QNaN should raise Invalid, and pipe that through to TableGen.
llvm-svn: 294945
This is a series of patches to enable adding of machine sched
models for ARM processors easier and compact. They define new
sched-readwrites for groups of ARM instructions. This has been
missing so far, and as a consequence, machine scheduler models
for individual sub-targets have tended to be larger than they
needed to be.
The current patch focuses on floating-point instructions.
Reviewers: Diana Picus (rovka), Renato Golin (rengolin)
Differential Revision: https://reviews.llvm.org/D28194
llvm-svn: 292825
The names of the tablegen defs now match the names of the ISD nodes.
This makes the world a slightly saner place, as previously "fround" matched
ISD::FP_ROUND and not ISD::FROUND.
Differential Revision: https://reviews.llvm.org/D23597
llvm-svn: 279129
forces having special checks in ArmInstPrinter::printInstruction. This
patch addresses this issue.
Not all special checks could be removed: either they involve elaborated
conditions under which the alias is emitted (e.g. ldm/stm on sp may be
pop/push but only if the number of registers is >= 2) or the number
of registers is multivalued (like happens again with ldm/stm) and they
do not match the InstAlias pattern which assumes single-valued operands
in the pattern.
Patch by: Roger Ferrer Ibanez
Differential Revision: http://reviews.llvm.org/D20237
llvm-svn: 271667
This patch was originally committed as r257883, but was reverted due to windows
failures. The cause of these failures has been fixed under r258677, hence
re-committing the original patch.
llvm-svn: 258681
This was originally committed as r255762, but reverted as it broke windows
bots. Re-commitiing the exact same patch, as the underlying cause was fixed by
r258677.
ARMv8.2-A adds 16-bit floating point versions of all existing VFP
floating-point instructions. This is an optional extension, so all of
these instructions require the FeatureFullFP16 subtarget feature.
The assembly for these instructions uses S registers (AArch32 does not
have H registers), but the instructions have ".f16" type specifiers
rather than ".f32" or ".f64". The top 16 bits of each source register
are ignored, and the top 16 bits of the destination register are set to
zero.
These instructions are mostly the same as the 32- and 64-bit versions,
but they use coprocessor 9 rather than 10 and 11.
Two new instructions, VMOVX and VINS, have been added to allow packing
and extracting two 16-bit floats stored in the top and bottom halves of
an S register.
New fixup kinds have been added for the PC-relative load and store
instructions, but no ELF relocations have been added as they have a
range of 512 bytes.
Differential Revision: http://reviews.llvm.org/D15038
llvm-svn: 258678
Summary:
BFC instructions are available in ARMv6T2 and above.
Reviewers: t.p.northover
Subscribers: aemerson
Differential Revision: http://reviews.llvm.org/D16076
llvm-svn: 257546
ARMv8.2-A adds 16-bit floating point versions of all existing VFP
floating-point instructions. This is an optional extension, so all of
these instructions require the FeatureFullFP16 subtarget feature.
The assembly for these instructions uses S registers (AArch32 does not
have H registers), but the instructions have ".f16" type specifiers
rather than ".f32" or ".f64". The top 16 bits of each source register
are ignored, and the top 16 bits of the destination register are set to
zero.
These instructions are mostly the same as the 32- and 64-bit versions,
but they use coprocessor 9 rather than 10 and 11.
Two new instructions, VMOVX and VINS, have been added to allow packing
and extracting two 16-bit floats stored in the top and bottom halves of
an S register.
New fixup kinds have been added for the PC-relative load and store
instructions, but no ELF relocations have been added as they have a
range of 512 bytes.
Differential Revision: http://reviews.llvm.org/D15038
llvm-svn: 255762
Both VLDRS and VLDRD fault if the memory is not 4 byte aligned, which wasn't
really being checked before, leading to faults at runtime.
llvm-svn: 251352
This is especially visible in softfp mode, for example in the implementation of libm fabs/fneg functions. If we have:
%1 = vmovdrr r0, r1
%2 = fabs %1
then move the fabs before the vmovdrr:
%1 = and r1, #0x7FFFFFFF
%2 = vmovdrr r0, r1
This is never a lose, and could be a serious win because the vmovdrr may be followed by a vmovrrd, which would enable us to remove the conversion into FPRs completely.
We already do this for f32, but not for f64. Tests are added for both.
llvm-svn: 246360
[DebugInfo] Add debug locations to constant SD nodes
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
llvm-svn: 235989
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
llvm-svn: 235977
This change is incorrect since it converts double rounding into single rounding,
which can produce different results. Instead this optimization will be done by
modifying Clang's codegen to not produce double rounding in the first place.
This reverts commit r232954.
llvm-svn: 232962
Anton tried this 5 years ago but it was reverted due to extra VMOVs
being emitted. This can be easily fixed with a liberal application
of patterns - matching loads/stores and extractelts.
llvm-svn: 232958
Specifically when the conversion is done in two steps, f16 -> f32 -> f64.
For example:
%1 = tail call float @llvm.convert.from.fp16.f32(i16 %0)
%conv = fpext float %1 to double
to:
vcvtb.f64.f16
llvm-svn: 232954
The FPv4-SP floating-point unit is generally referred to as
single-precision only, but it does have double-precision registers and
load, store and GPR<->DPR move instructions which operate on them.
This patch enables the use of these registers, the main advantage of
which is that we now comply with the AAPCS-VFP calling convention.
This partially reverts r209650, which added some AAPCS-VFP support,
but did not handle return values or alignment of double arguments in
registers.
This patch also adds tests for Thumb2 code generation for
floating-point instructions and intrinsics, which previously only
existed for ARM.
llvm-svn: 216172
target hook.
This patch teaches the compiler that:
rX, rY = VMOVRRD dZ
is the same as:
rX = EXTRACT_SUBREG dZ, ssub_0
rY = EXTRACT_SUBREG dZ, ssub_1
<rdar://problem/12702965>
llvm-svn: 216132
This makes the two intrinsics @llvm.convert.from.f16 and
@llvm.convert.to.f16 accept types other than simple "float". This is
only strictly needed for the truncate operation, since otherwise
double rounding occurs and there's no way to represent the strict IEEE
conversion. However, for symmetry we allow larger types in the extend
too.
During legalization, we can expand an "fp16_to_double" operation into
two extends for convenience, but abort when the truncate isn't legal. A new
libcall is probably needed here.
Even after this commit, various target tweaks are needed to actually use the
extended intrinsics. I've put these into separate commits for clarity, so there
are no actual tests of f64 conversion here.
llvm-svn: 213248
This commit adds the pre-UAL aliases of fconsts and fconstd for
vmov.f32 and vmov.f64. They use an InstAlias rather than a
MnemonicAlias to properly support the predicate operand.
We need to support encoded 8-bit constants in order to implement the
pre-UAL fconsts/fconstd aliases for vmov.f32/vmov.f64, so this
commit also fixes parsing of encoded floating point constants used
in vmov.f32/vmov.f64 instructions. Now we can support assembly code
like this:
fconsts s0, #0x70
which is equivalent to vmov.f32 s0, #1.0.
Most of the code was already in place to support this feature.
Previously the code was trying to accept encoded 8-bit float
constants for the vmov.f32/vmov.f64 instructions. It looks like the
support for parsing encoded floats was lost in a refactoring in
commit r148556 and we did not have any tests in place to catch it.
The change in this commit is to keep the parsed value as a 32-bit
float instead of a 64-bit double because that is what the isFPImm()
function expects to find. There is no loss of precision by using a
32-bit float here because we are still limited to an 8-bit encoded
value in the end.
Additionally, we explicitly reject encoded 8-bit floats for
vmovf.32/64. This is the same as the current behavior, but we now do
it explicitly rather than accidently.
llvm-svn: 198697
This prevents us from silently accepting invalid instructions on (for example)
Cortex-M4 with just single-precision VFP support.
No tests for the extra Pat Requires because they're essentially assertions: the
affected code should have been lowered to libcalls before ISel.
rdar://problem/15302004
llvm-svn: 193354
If an alias inherits directly from InstAlias then it doesn't get any default
"Requires" values, so llvm-mc will allow it even on architectures that don't
support the underlying instruction.
This tidies up the obvious VFP and NEON cases I found.
llvm-svn: 193340
Back in the mists of time (2008), it seems TableGen couldn't handle the
patterns necessary to match ARM's CMOV node that we convert select operations
to, so we wrote a lot of fairly hairy C++ to do it for us.
TableGen can deal with it now: there were a few minor differences to CodeGen
(see tests), but nothing obviously worse that I could see, so we should
probably address anything that *does* come up in a localised manner.
llvm-svn: 188995
This adds a new decoder table/namespace 'VFPV8', as these instructions have their
top 4 bits as 0b1111, while other Thumb instructions have 0b1110.
llvm-svn: 185642
Add some generic SchedWrites and assign resources for Swift and Cortex A9.
Reapply of r183257. (Removed empty InstRW for division on swift)
llvm-svn: 183319
James Molloy